REFERENCE ONLY VS-10A SERVO TECHNICAL DATA Control System: Operating Voltage: STD Direction: Test Voltage: Operating Speed: Stall Torque: Output Angle: Running Current: Stall Current: Dead Band Width: FEATURES Motor Type: Potentiometer Life: Bearing: Gear Material: DIMENSIONS Size : Weight: CASE AND HORN DRAWING Version: SPL_VS-10A_V1.2_20100609 STD ACCESSORIES: OPTION ACCESSORIES: REMARKS: Spline Horns: Connector Wire Length: Other Features: 40 42.4 25 60 17.9 64.4 8.5 49 14 4- 5 Cross Horn "D" Star Horn "D" Circular Horn "D" Cross Horn "D" × 1pc Star Horn "D" × 1pc Circular Horn "D" × 1pc Horn Screw × 1pc Servo Mounter "Set-A": Rubber Mounter × 4pcs and Metal Sleeve × 4pcs 60g (2.12 oz) 49.2×25×42.5mm(2.54×1.0×1.67in) Pulse width control, 1500μs neutral 4.8V～6.0V (DC) Counter clockwise/pulse traveling 800 to 2200 μsec. at 4.8V at 6.0V 0.23sec/60°at no load 0.20sec/60° at no load ≥7.5kgf.cm(104.15oz/in) ≥9.0kgf.cm(124.98oz/in) ≥170° ～0.25A ～2.6A 5μsec 3poles metal brush motor (Normal Motor) 1,000,000 cycles 2pcs Ball bearing Resin and Heavy Duty Resin ～0.30A ～3.3A Spline type for FUTABA style 250mm(9.84in),22AWG(Connector for FUTABA or JR style) Heat Sink(Aluminium middle case),Water Resistance FOR REFERENCE
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
REFERENCE ONLY
VS-10A SERVOTECHNICAL DATAControl System:Operating Voltage:STD Direction:Test Voltage:Operating Speed:Stall Torque:
Output Angle:
Running Current: Stall Current:
Dead Band Width:
FEATURESMotor Type: Potentiometer Life: Bearing:Gear Material:
DIMENSIONSSize :Weight:
CASE AND HORN DRAWING
Version: SPL_VS-10A_V1.2_20100609
STD ACCESSORIES:
OPTION ACCESSORIES:
REMARKS:
Spline Horns:Connector Wire Length:Other Features:
40
42.4 25
6017
.9
64.4
8.5
49
14
4- 5Cross Horn "D" Star Horn "D" Circular Horn "D"
Cross Horn "D" × 1pcStar Horn "D" × 1pcCircular Horn "D" × 1pc
Horn Screw × 1pc
Servo Mounter "Set-A": Rubber Mounter × 4pcs and Metal Sleeve × 4pcs
60g (2.12 oz)49.2×25×42.5mm(2.54×1.0×1.67in)
Pulse width control, 1500μs neutral4.8V～6.0V (DC)Counter clockwise/pulse traveling 800 to 2200 μsec.at 4.8V at 6.0V0.23sec/60°at no load 0.20sec/60° at no load≥7.5kgf.cm(104.15oz/in) ≥9.0kgf.cm(124.98oz/in)
≥170°
～0.25A～2.6A
5μsec
3poles metal brush motor (Normal Motor)1,000,000 cycles2pcs Ball bearingResin and Heavy Duty Resin
～0.30A～3.3A
Spline type for FUTABA style250mm(9.84in),22AWG(Connector for FUTABA or JR style)Heat Sink(Aluminium middle case),Water Resistance
FOR REFERENCE