LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012 ISC Name of Act Current Malaysian Standards (MS) Remark Regulator No. MS No. Title of MS Agency Contact details A Agriculture April 2009 1 MS 1230:2010 FAMA 2 MS 894:1984 3 MS 1124:1996 4 MS 1306:2005 5 MS 1252:2009 6 MS 951:2003 7 MS 1324:1993 8 MS 892:2004 9 MS 1393:1996 10 MS 1146:1989 11 MS 1361:1994 12 MS 1323:2008 13 MS 1362:1994 14 MS 956:2003 15 MS 893:2010 16 MS 1127:2002 17 MS 1040:1986 18 MS 1145:2003 19 MS 1149:1989 20 MS 232:1974 Regulation / By-Laws Directive/ Circulars/ Guideline Date of Enforce ment Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141] Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008 Fresh Lady’s Finger (Okra)- Specification (1st revision) Pn. Norhayati Hj Maulud Emel:norhayatihm@f ama.gov.my Tel: 03-61264000 ext 4127 Faks: 03-61374766 Fresh Chillies- Specification (1st revision) Replaced by MS 894:2005- Fresh Chillies- Specifica tion (1st revision) Specification for Fresh Sweet Pepper (Bell Pepper) (1 st revision) Fresh Ginger-Specification (1 st revision) Fresh French Beans- Specification (1st Spesifikasi bagi Kacang Panjang (2nd revision) Specification for Fresh Kale (kailan) Spesifikasi bagi Kobis Bulat (2nd revision) Specification for Fresh Chinese Cabbage (Head Type) Specification for Fresh Bitter Gourd Specification for Fresh Head Lettuce Fresh Mustards- Specification (1st Specification for Fresh Spinach Spesifikasi bagi Timun (2nd revision) Spesifikasi bagi Tomato (2nd revision) Specification for Fresh Carambola (2nd revision) Specification for Fresh Specification for Fresh Eksotika Papaya (1st Specification for Fresh Specification for Malaysian Mandarins for Fresh-Fruit Consumption
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of Act
Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Contact details
A
Agr
icul
ture
April
200
9
1 MS 1230:2010 FAMA
2 MS 894:1984
3 MS 1124:1996
4 MS 1306:2005
5 MS 1252:2009
6 MS 951:2003
7 MS 1324:1993
8 MS 892:2004
9 MS 1393:1996
10 MS 1146:1989
11 MS 1361:1994
12 MS 1323:2008
13 MS 1362:1994 Specification for Fresh Spinach
14 MS 956:2003
15 MS 893:2010
16 MS 1127:2002
17 MS 1040:1986 Specification for Fresh Papaya18 MS 1145:2003
19 MS 1149:1989 Specification for Fresh Guava20 MS 232:1974
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcement Agenc
y
Federal Agricultural Marketing Authority Act 1965 (Revised 1974) [Act 141]
Federal Agricultural Marketing Authority (Grading, Packaging And Labelling Of Agricultural Produce) Regulations 2008
The Production, Processing, Labelling and Marketing of Plant-Based Organically Produced Foods
Pn. Shamsinar Abdul TalibEmel:[email protected]: 03-88850787Faks: 03-88893815
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of Act
Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcement Agenc
y
A
Agric
ultu
re
35 MS 157:2005 MPOB
Malaysian Palm Oil Board Act 1998 [Act 582]
Peraturan-Peraturan Lembaga Minyak Sawit Malaysia (Perlesenan) 2005
Syarat-Syarat Bagi Pemegang Lesen Dalam Kategori Pengeluar Biji Benih Kelapa Sawit (NS)
Oil Palm Seeds for Commercial Planting - Specification
Pn. Zalena Abu HasanEmel:[email protected]: 03-78002977Faks: 03-78034014
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
B
36 MS ISO 8124: Part 1: 2001
KPDNKK
37 MS ISO 8124: Part 1: 2011
38 MS ISO 8124: Part 2:2008
39 MS ISO 8124: Part 3: 2002 Safety of Toys - Part 3: Migration of Certain Elements
40 MS 1774: Part 4: 1998
41 MS 1774: Part 5: 1998
42 MS 1774: Part 6: 1998
43 MS 1848:2005 ALUMINIUM AND ALUMINIUM ALLOYS - FOILS
MITI
44 MS 2040:2007
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Chemicals and
Materials
Consumer Protection Act 1999 [Act 599]
Consumer Protection (Safety Standards For Toys) (Amendment) Regulations 2010
1 Ogos 2010
Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties
Pn Thiagaletchumi V. ManiamEmel: [email protected]: 03-8882 5862Faks: 03-88826960
Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical Properties
SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (FIRST REVISION) (ISO 8124-1:2009, IDT)
1 Ogos 2010
Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities
Safety of Toys - Part 5: Chemical Toys (Sets) Other Than Experimental Sets
Safety of Toys - Part 6: Graphical Symbol for Age Warning Labelling
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports) (No 3) Order 2011Incorporating [P.U.(A) 86/2008]
En. Farid Mohd SahatEmel: [email protected]: 03-62034710Faks:03-62033137
ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS - SPECIFICATION
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
D
45 MS 544: Part1: 2001
JKT, KPKT
46 MS 544: Part 2: 2001
47 MS 544: Part 3: 2001
48
49
50
51
52 MS 544: Part 5: 2001
53 MS 544: Part 6: 2001
54 MS 544: Part 7: 2001
55
56
JKT, KPKT
57
58
59
60
Arahan Tetap Bomba 61 MS 76: 1972 BOMBA
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
Building, Construction and Civil
Engineering
Street, Drainage and Building Act 1974 [Act 133]
Uniform Building By-Laws 1984 (G.N. 5178/84)
Code of Practice for Structural Use of Timber: Part 1: General (1st revision)
Code of Practice for Structural Use of Timber: Part 2: Permissible Stress Design of Solid Timber (1st revision)
Code of Practice for Structural Use of Timber: Part 3: Permissible Stress Design of Glued Laminated Timber
MS 544: Part 4: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 1: Structural Plywood
MS 544: Part 4: Section 2: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 2: Marine Plywood
MS 544: Part 4: Section 3: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 3: Cement Bonded Particle Board (CBP)
MS 544: Part 4: Section 4: 2001
Code of Practice for Structural Use of Timber: Part 4: Timber Panel Products: Section 4: Oriented Strand Board (OSB)
Code of Practice for Structural Use of Timber: Part 5: Timber Joints
Code of Practice for Structural Use of Timber: Part 6: Workmanship, Inspection and Maintenance (1st revision)
Code of Practice for Structural Use of Timber: Part 7: Testing (1st revision)
MS 544: Part 9: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 9: Fire Resistance of Timber Structures: Section 1: Method of Calculating Fire Resistance of Timber Members
MS 544: Part 10: 2003
Code of Practice for Structural Use of Timber: Part 10: Preservative Treatment of Structural Timber
MS 544: Part 11: Section 1: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 1: Domestic Floor Joists
MS 544: Part 11: Section 2: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 2: Ceiling Joists
MS 544: Part 11: Section 3: 2001
Code of Practice for Structural Use of Timber: Part 11: Recommended Span Tables and Their Calculations: Section 3: Ceiling Binders
MS 544: Part 12: 2006
Code of Practice for Structural Use of Timber: Part 12: Laminated Veneer Lumber for Structural Application
Street, Drainage and Building Act 1974 [Act 133]
Fire Services Act 1988
Specification for bricks and blocks of fired brick-earth, clay or shale: Part 2: Metric Units
Tajuk ada Part 2 kerana adopted dari Part 2 standard luar
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
62 MS 1184:2002
Building, Construction and Civil
Engineering
Street, Drainage and Building Act 1974[Act 133]
Uniform Building By-Laws 1984 (Amendment 1991) Inserting new By-Law 34(A)By-Law 34(A)(2)
Code of practice for access of disabled people to public buildings
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
63 MS 1331:2003
###
64 MS 888: 2011 White Portland cement
CIDB
65 MS 795:2002
66
67
68
69
70
71
72
73
74
Garis Panduan dan Piawaian Perancangan-Kemudahan Golongan Orang Kurang Upaya (Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia)
Code of Practice for Access of Disabled Persons Outside Building
Jbtn. Perancangan Bandar & Desa Semenanjung Malaysia
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
Specification for WC Flushing Cisterns and Flush pipes (1st revision)
MS 1064 : PART 10 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 10 : COORDINATING SIZES AND PREFERRED SIZES FOR REINFORCED CONCRETE COMPONENTS (FIRST REVISION)
MS 1064 : PART 3 : 2003 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 3 : COORDINATING SIZES AND PREFERRED SIZES FOR STAIRS AND STAIR OPENINGS (FIRST REVISION)
MS 1064 : PART 4 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 4 : COORDINATING SIZES AND PREFERRED SIZES FOR DOORSETS (FIRST REVISION)
MS 1064 : PART 5 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 5 : COORDINATING SIZES AND PREFERRED SIZES FOR WINDOWSETS (FIRST REVISION)
MS 1064 : PART 6 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 6 : COORDINATING SIZES AND PREFERRED SIZES FOR RIGID FLAT SHEETS (FIRST REVISION)
MS 1064 : PART 7 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 7: COORDINATING SIZES AND PREFERRED SIZES FOR TILES
MS 1064 : PART 8 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 8 : COORDINATING SIZES AND PREFERRED SIZES FOR MASONRY BRICKS AND BLOCKS
MS 1064 : PART 9 : 2001 (CONFIRMED 2009)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 9: COORDINATING SIZES AND PREFERRED SIZES FOR CABINETS
MS 1017 : PART 1 : 1986
SPECIFICATION FOR ALUMINIUM FRAMED SLIDING GLASS DOORS : PART 1 : SINGLE GLAZED DOORS
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
###75
CIDB
76
77
78
79
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
MS 1020:2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)
MS 1314 : PART 1 : 2004
PRECAST CONCRETE PILES : PART 1 : GENERAL REQUIREMENTS AND SPECIFICATIONS (FIRST REVISION)
MS 1314 : PART 2 : 2004
PRECAST CONCRETE PILES : PART 2 : METHOD FOR DETERMINATION OF BENDING STRENGTH OF PRECAST CONCRETE PILES (BEND TEST) (FIRST REVISION)
MS 1314 : PART 3 : 2004
PRECAST CONCRETE PILES : PART 3 : PRECAST REINFORCED CONCRETE SQUARE PILES (RC PILES) CLASS M, CLASS J AND CLASS S
MS 1314 : PART 4 : 2004
PRECAST CONCRETE PILES : PART 4 : PRECAST PRETENSIONED SPUN CONCRETE PILES (SPUN PILES) CLASS A, CLASS B AND CLASS C
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of
Enforcemen
t
D
###
80
CIDB
81
82 MS 795-1:2011
83 MS 795-2:2011
84 MS 795-3:2011
85 SPECIFICATION FOR SAWN-TIMBER FOUNDATION PILES
86
87 MS 1037:1986 Sulphate-resisting Portland cement
MS EN 197-1:2007
90MS ISO 13006:2003
91MS 147:2001
92MS 1522:2011
Building, Construction and Civil
Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia (Pindaan)2011
MS 1314 : PART 5 : 2004
PRECAST CONCRETE PILES : PART 5 : PRECAST PRESTRESSED CONCRETE SQUARE PILES - CLASS PC-X, CLASS PC-Y, SMALL PILES CLASS PCS-1, AND CLASS PCS-2
MS 1314 : PART 6 : 2004
PRECAST CONCRETE PILES : PART 6: SMALL REINFORCED CONCRETE SQUARE PILES - SMALL PILES CLASS RCS-1 AND CLASS RCS-2
WC FLUSHING CISTERNS - PART 1 : SPECIFICATION (SECOND REVISION)
WC FLUSHING CICTERNS - PART 2:INLET VALVES (SECOND REVISION)
WC FLUSHING CICTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION)
MS 822 : 1983 (CONFIRMED:2004)
MS 1061 : PART 2 : 1999
VITRIFIED CLAY PIPES FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS: PART 2: QUALITY CONTROL AND SAMPLING
88
89
MS EN 197-1:2007,
MS EN 197-2:2007
CEMENT- PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
CEMENT - PART 2: CONFORMITY EVALUATION
MS 1227, MS 1389, MS 1520 & MS 1388 telah
digabung menjadi MS EN 197 Part 1 & 2
*Refer no. 88
CEMENT- PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
Ceramic Tiles - Definitions, Classification, Characteristic and Marking
Specification for Quality of Vitreous China Sanitary Appliances (1st revision)
Specification for Vitreous China Water Closet Pans (1st revision)
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
Specification for 15A plugs and socket-outlets for domestic and similar purposes
MS 589-3:1998 Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 3: Specification for adaptors
MS IEC 60998-1:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 1: General requirements
MS IEC 60998-2-1:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-1: Particular requirements for connecting devices as separate entities with screw - type clamping
MS IEC 60998-2-3:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
MS IEC 60998-2-4:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-4: Particular requirements for twist-on connecting devices
MS IEC 60998-2-5:2005
Connecting devices for low-voltage circuits for household and similar purposes: Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices
MS IEC 60669-1:2004
Switches for household and similar fixed electrical installations: Part 1: General requirements
MS IEC 60669-2-1:2004
Switches for household and similar fixed electrical installations: Part 2-1: Particular requirements – Electronic switches
Switches for household and similar fixed electrical installations: Part 2-2: Particular requirements – Remote control switches (RCS)
MS IEC 60669-2-3:2004
Switches for household and similar fixed electrical installations: Part 2-3: Particular requirements – Time delay switches (TDS)
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 2: Specification for 13A switched and unswitched socket-outlet (1st revision)
Specification for portable 2 pin socket-outlets for class II equipment for household and similar purposes
MS IEC 61558-1:2005
Safety of power transformers, power supply units and similar: Part 1: General requirements and tests
MS IEC 61558-2-5:2005
Safety of power transformers, power supply units and similar: Part 2-5: Particular requirements for shaver transfomers and shaver supply units
MS IEC 61558-2-6:2005
Safety of power transformers, power supply units and similar: Part 2-6: Particular requirements for safety isolating transformers for general use
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs): Part 1: General rules (1st revision)
MS IEC 61008-2-1:2003
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage
MS IEC 61008-2-2:2003
Residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCB’s): Part 2-2: Applicability of the general rules to RCCB’s functionally dependent on line voltage
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
117
118
119
120
121
122 Low-voltage fuses: Part 1: General requirements
123
124
125
ST
126
127
128 MS 140:1987 Specification for insulated flexible cords and cables (1st revision)
129 MS 136:1995
130 MS 1936:2007 Electrical installations of buildings - Guide to MS IEC 60364
131 MS 1979:2007 Electrical installations of buildings - Code of Practice
132
SKMM
133 MS 406:1996
134 IEC standard voltages
135
MS 1578:2003
MS 589-1:2011
Generation, Transmissio
n and Distribution
of Energy
MS IEC 61009-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 1: General rules
Replaced by MS IEC 61009: Part 1: 2005
MS IEC 61009-2-1:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage
MS IEC 61009-2-2:2003
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs): Part 2-2: Applicability of the general rules to RCBOs functionally dependent of line voltage
MS IEC 60898-1:2007
Electrical accessories - Circuit-breaker for overcurrent protection for household and similar installation: Part 1: Circuit-breaker for a.c operation
Replaced by MS IEC 60898: Part 1: 2007
MS IEC 60898-2: 2007
Circuit-breakers for overcurrent protection for household ans similar installation: Part 2: Circuit-breaker for a.c and d.s. operation
Replaced by MS IEC 60898: Part 2: 2007
MS IEC 60269-1:2011
Replaced by MS IEC 60269: Part 1: 2005
MS IEC 60269-2-1:2011
Low-voltage fuses: Part 2-1: Supplementary requirements for fuses for use by authorized person (Fuses mainly for industrial application) – Section I to IV: Examples of types of standardised fuses
MS 1586-3:2003
Low-voltage fuses: Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
Low-volatge fuses: Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Section I to IV
Customs (Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]
MS CISPR 22:2009
Information Technology Equipment - Radio disturbance characteristics - Limits and methods of measurement
En. Mohamad Nazir OsmanEmel:[email protected]: 03-86888247Faks: 03-86881005
Specification for voltages and frequency for alternating current transmission and distribution systems
MS IEC 60038:2006
MS IEC 61643-1:2006
Surge protective devices connected to low-voltage power distribution systems -Part 1: Performance requirements and testing methods
*Refer no. 93
Specification for flat non-rewirable two-pole plugs, 2.5A. 250 V with cord for connection of Class II – Equipment for household and similar purposes
*Refer no. 94
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
MS 1577:2003SKMM
MS 140:1987 Specification for insulated flexible cords and cables (1st revision)
136
ST
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
Generation, Transmissio
n and Distribution
of Energy
Electricity Supply Act 1990 [Act 447]
Electricity Supply (Electrical Product And
Appliance Safety) Regulations 2008
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
*Refer no. 95
Specification for 13A plugs, socket-outlets, adaptors and connection units: Part 1: Specification for rewirable and non-rewirable 13A plugs (1st revision)
En. Mohamad Nazir OsmanEmel:[email protected]: 03-86888247Faks: 03-86881005
*Refer no. 128
MS IEC 60364-1:2007
Low-Voltage Electrical Installations: Part 1: Fundamental Principles, Assessment of General Characteristics, Definitions (2nd revision)
Low-Voltage Electrical Installations: Part 4-41: Protection for Safety - Protection Against Electrical Shock
MS IEC 60364-7:Section 703:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 703: Locations Containing Sauna Heaters
Confirmed: 2002
MS IEC 60364-7-712:2007
Electrical Installations of Buildings: Part 7-712: Requirements for Special Installations or Locations - Solar Photovoltaic (PV) Power Supply Systems
MS IEC 60364-7-708:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 708: Electrical Installations in Caravan Parks and Caravans
MS IEC 60364-5-55:2003
Electrical Installations of Buildings: Part 5: Selection and Erection of Electrical Equipment: Chapter 55: Other Equipment: Section 551: Low Voltage Generating Sets
MS IEC 60364-7-705:1996
Electrical installations of Buildings: Part 7: Requirements for Special Installations or Locations-Section 705: Electrical Installations of Agricultural and Horticultural Premises
Confirmed: 2002
MS IEC 60364-7-706:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 706: Restrictive Conducting Locations
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-7-702:2003
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 702: Swimming Pools and Other Basins
5-55:2003Electrical Installations of Buildings: Part 5-55: Selection and Erection of Electrical Equipment-Other Equipment
MS IEC 60364-5-52:2003
Electrical Installations of Buildings: Part 5-52: Selection and Erection of Electrical Equipment-Wiring Systems
MS IEC 60364-4-43:2003
Electrical Installations of Buildings: Part 4-43: Protection for Safety - Protection Against Overcurrent
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-7-709:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 709: Marinas and Pleasure Craft
Confirmed: 2002
MS IEC 60364-7-707:1996
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 707: Earthing Requirements for the Installations of Data Processing Equipment
Confirmed: 2002
MS IEC 60364-7-704:2003
Electrical Installations of Buildings: Part 7: Requirements for Special Installations or Locations: Section 704: Construction and Demolition Site Installations
ST(lP/KKE) 16/1 (3)
MS IEC 60364-5-53:2003
Electrical Installations of Buildings: Part 5-53: Selection and Erection of Electrical Equipment-Isolation, Switching and Control
MS IEC 60364-4-42:2003
Electrical Installations of Buildings: Part 4-42: Protection for Safety-Protection Against Thermal Effects
MS IEC 60364-6-61:2003
Electrical Installations of Buildings: Part 6-61: Verification-Initial Verification
ST(lP/KKE) 16/1 (3)
ST(lP) PE/11/2/1( )
MS IEC 60364-5-54:2004
Electrical Installations of Buildings: Part 5-54: Selection and Erection of Electrical Equipment-Earthing Arrangements, Protective Conductors and Protective Bonding Conductors
MS IEC 60364-4-44:2007
Electrical Installations of Buildings: Part 4-44: Protection for Safety-Protection Against Voltage Disturbances and Electromagnetic Disturbances
MS IEC 60364-5-51:2007
Electrical Installation of Buildings: Part 5-51: Selection and Erection of Electrical Equipment-Common Rules (2nd revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
E
156
ST
1-Sep-11
157
158
159
160
161 Luminaires: Part 1: General requirements and test BOMBA
163 MS ISO 4344:2004 Steel wire ropes for lifts - Minimum requirements
164 MS 1968:2007
MITI
165 MS 1919:2006
166 MS ISO 2408:2004
167 MS 971:1985 KPDNKK
168 MS 2021-1:2006
DOSH169 MS 1803:2008 CRANES - SAFETY - TOWER CRANES
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Mechanical Engineering
Akta Lembaga Pembangunan Industri Pembinaan Malaysia
(Pindaan)2011
Tuan Haji Razuki Hj. IbrahimEmel: [email protected]: 03-26170348Fax 03-40451808
Customs Act 1967 [Act 235] Customs
(Prohibition of Imports) Order 2008 Incorporating latest amendment [P.U.(A) 34/2010]
Buku Tatacara Mengimport Produk Bahan Binaan CIDB (Website CIDB)
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions En. Farid Mohd Sahat
Fire Extinguishing Installations and Equipments: Part 1: Hydrant System, Hose Reel and Foam Inlets
*Refer no. 220
MS 1489: Part 1: 1999
Replaced by MS 1489: Part 1: 1999
Fixed Firefighting System-Automatic Sprinkler System-Design, Installation and Maintenance
Carbon Dioxide Extingushing Systems: Design and Installation
Code Of Practice For Fire Precautions in the Design Of Buildings-Smoke Control in Protected Escape Routes Using Pressurization
Smoke Control System using Natural (Displacement) or Powered (Extraction) Ventilation
MS 1176: Part 5:1990
Specification for Compenents of Automatic Fire Detection System: Part 5: Heat Sensitive Detectors-Point Detectors Containing a Static Element
MS 1176: Part 7:1991
Specification for Compenents of Automatic Fire Detection System: Part 7: Specification for Point-Type Smoke Detectors Using Scattered Light, Transmitted Light or Ionization
MS 1176: Part 8: 1991
Specification for Compenents of Automatic Fire Detection System: Part 8: Specification for High Temperature Heat Detectors
MS 1176: Part 9: 1993
Specification for Compenents of Automatic Fire Detection System: Part 9: Methods of Test of Sensitivity to Fire
MS 1471: Part 3: 1999
Vocabulary on Fire Protection: Part 3: Fire Detection and Alarm
MS 1471:Part 6: 1999
Vocabulary on Fire Protection: Part 6: Evacuation and Means of Escape
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
P
231 MS 1238:2009
MITI
232
233 MS 1494:2000
234 MS 1495:2000
2009
235 MS 1496:2000
236 MS 1795:2005 Steels for cold heading and cold extruding - Specification
237 MS 1945:2006 Free cutting steels
238
239 Rolled carbon steel for cold-finished steel bars
240
241 Carbon steels for machine structural use
242 Cold finished carbon and alloy steel bars
243
244
245 Cold-reduced carbon steel sheet of structural quality
246 Cold-reduced carbon steel sheet for vitreous enamelling
247
248
249
250
251
252
253
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
Metallic Materials and Semi-finished Products
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
Specification for galvanized steel wire for aluminium conductors, steel-reinforced
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables: Part 2: Submarine Cables (1st revision)
Specification for billets for hot rolled non-alloyed steel bars and rods
Specification for blooms for hot rolled non-alloyed structural steel sections
Specification for beam blanks for hot rolled non-alloyed structural steel sections
MS 2240: Part 2:2009
Stainless steels for general purposes: Part 2: Semi-finished products, bars, rods and sections
MS 2245:2009 (P)
MS 2246:2009 (P)
Specification for deformed and plain carbon-Steel bars for concrete reinforcement
MS 2247:2009 (P)
MS 2259:2009 (P)
MS ISO 3574:2009 (P)
Cold-reduced carbon steel sheet of commercial and drawing qualities
MS ISO 4960:2009 (P)
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
MS ISO 4997:2009 (P)
MS ISO 5001:2009 (P)
MS ISO 5002:2009 (P)
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
MS ISO 6932:2009 (P)
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
MS ISO 13887:2009 (P)
Cold-reduced steel sheet of higher yield strength with improved formability
MS ISO 14590:2009 (P)
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
MS ISO 16120: Part 1: 2008
Non-alloy steel wire rod for conversion to wire: Part 1: General requirements (1st revision)
MS ISO 16120: Part 2: 2008
Non-alloy steel wire rod for conversion to wire: Part 2: Specific requirements for general purpose wire rod (1st revision)
MS ISO 16120: Part 3: 2008
Non-alloy steel wire rod for conversion to wire: Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel wire rod (1st revision)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012
ISC Name of ActCurrent Malaysian Standards (MS)
RemarkRegulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
Date of Enforcem
ent
P 2009
254
MITI
255 Bead wire
256
257
258
259
260
261
262 MS 146:2006
CIDB
263 MS 1196:2004
264 MS 1092 : 1987 SPECIFICATION FOR LOW CARBON STEEL WIRE RODS
265 MS 1093 : 1987 SPECIFICATION FOR HIGH CARBON STEEL WIRE RODS
266MS 1137:2009
267PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE
268PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS
269
270
271
272MS 144:2006
273MS 145:2006
274
MS 1705:2003
MITI275 MS 1721 :2003 Structural steels - plates, wide flats and wide strips276 MS 1768:2004 Hot-rolled carbon steel strip for pipes and tubes277
Metallic Materials and Semi-finished Products
Customs Act 1967 [Act 235]
Customs (Prohibition of Imports)
Order 2008 Incorporating latest amendment [P.U.(A)
34/2010]
MS ISO 16120: Part 4: 2008
Non-alloy steel wire rod for conversion to wire: Part 4: Specific requirements for wire rod for special applications
Hot rolled products of structural steels: Part 1: General technical delivery conditions
MS EN 10025: Part 2:2009 (P):2011
Hot rolled products of structural steels: Part 2: Technical delivery conditions for non-alloy structural steels
MS EN 10025: Part 3:2009 (P):2011
Hot rolled products of structural steels: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
MS EN 10025: Part 4:2009 (P) :2011
Hot rolled products of structural steels: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
MS EN 10025: Part 5:2009 (P) :2011
Hot rolled products of structural steels: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
MS EN 10025: Part 6:2009 (P):2011
Hot rolled products of structural steels: Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Akta Lembaga Pembangunan Industri Pembinaan Malaysia
(Pindaan)2011
Hot rolled steel bars for the reinforcement of concrete - Specification (3rd revision)
Luminaires: Part 2-8: Particular requirements handlamps (1st revision)Ir. Amir HassanEmel:[email protected]: 03-88708605Faks: 03-88888652
MS IEC 60335-2-12:2003
Household and similar electrical appliances - Safety: Part 2-12 : Particular requirements for warming plates and similar appliances
MS IEC 60335-2-15:2004
Household and similar electrical appliances - Safety: Part 2-15: Particular requirements for appliances or heating liquids
MS IEC 60335-2-13:2006
Household and similar electrical appliances - Safety: Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
MS IEC 60335-2-9:2006
Household and similar electrical appliances - Safety: Part 2-9: Particular requirements for grills, toasters, and similar portable cooking appliances
MS IEC 60335-2-36:2003
Household and similar electrical appliances - Safety: Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
MS IEC 60335-2-3:2006
Household and similar electrical appliances - Safety: Part 2-3: Particulars requirements for electric iron
MS IEC 60335-2-8:2002
Safety of household and similar electrical appliances - Safety: Part 2-8 : Particular requirements for shavers, hair clippers and similar appliances
MS IEC 60335-2-14:2003
Household and similar electrical appliances – Safety: Part 2-14: Particular requirements for kitchen machines (1st revision)
MS IEC 60335-2-73:1996
Household and similar electrical appliances - Safety: Part 2-73: Particular requirements forfixed immersion heaters
MS IEC 60335-2-74:2010
Household and similar electrical appliances - Safety: Part 2-74 : Particular requirements for portable immersion heaters
Household and similar electrical appliances - Safety: Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
MS IEC 60335-2-25:2007
Household and similar electrical appliances - Safety: Part 2-25: Particular requirements for microwave ovens
Safety of household and similar electrical appliances : Part 2 : Particular requirements for fans
MS 1597-2-80:2007
Household and similar electrical appliances - Safety: Part 2-80: Particular requirements for fans (2nd revision)
MS IEC 60335-2-31:2003
Household and similar electrical appliances - Safety: Part 2-31: Particular requirements for range hoods
MS IEC 60335-2-98:2003
Household and similar electrical appliances - Safety: Part 2-98: Particular requirements for humidifiers
MS IEC 60335-2-4:2007
Household and similar electrical appliances - Safety: Part 2-4: Particular requirements for spin extractors
MS IEC 60335-2-7:2007
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES (FIRST REVISION) (IEC 60335-2-7:2006, IDT)
MS IEC 60335-2-11:2003
Household and similar electrical appliances - Safety: Part 2-11: Particular requirements for tumble dryers (1st revision)
MS IEC 60335-2-43:2007
Household and similar electric appliances - Safety: Part 2-43: Particular requirements for cloths dryers and towel rails
MS IEC 60335-2-24:2002
Safety of household and similar electrical appliances: Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
MS IEC 60598-2-20:2005
MS IEC 60745-1:2010
MS IEC 60745-2-5:2010
Hand-held motor-operated electric tools-Safety: Part 2-5: Particular requirements for circular saws
MS IEC 60745-2-1:2011
Hand-held motor-operated electric tools - Safety: Part 2-1: Particular requirements for drills and impact drills
MS IEC 60745-2-3:2010
Safety of handheld motor-operated electric tools: Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
MS IEC 60745-B3452-4:2011
Hand-held motor-operated electric tools - Safety: Part 2-4: Particular requirements for sanders and polishers other than disk type
MS IEC 60745-2-7:2005
Safety of handheld motor-operated electric tools: Part 2-7: Particular requirements for spray guns for non-flammable liquids
MS IEC 60745-2-11:2005
Hand-held motor-operated electric tools -Safety: Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
LIST OF MANDATORY STANDARDS AS OF 10 FEB 2012ISC Name of Act Current Malaysian Standards (MS) Remark Regulator
No. MS No. Title of MS Agency Contact details
Regulation / By-Laws
Directive/ Circulars/ Guideline
S 333 ST
334
335
336
337 AMD.1: 2005
ST (IP/KKE) 16/2/1(11) 338 MS 62115:2008 Electric Toys Safety
339 MS 619-2-22:2005 KPDNKK
Arahan Tetap Bomba Luminaires: Part 1: General requirements and test BOMBA
340 MS 60335-2-6:1999 ST
341
Lamp controlgear: Part 2-8: Particular requirements for ballast for fluorescent lamps
MS 141-2:1993
342 Information technology equipment – Safety: Part 1: General equipment
U 343 MS 1875:2006 Penentuan untuk Isi Kacang Tanah Mentah 1
Hand-held motor-operated electric tools -Safety: Part 2-17: Particular requirements for routers and trimmers
MS IEC 60335-2-79:2007
Household and similar electrical appliances - Safety: Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
MS IEC 60335-2-45:2003
Household and similar electrical appliances - Safety: Part 2-45: Particular requirements for portable heating tools and similar appliances (1st revision)
MS IEC 60335-2-76:2007
Household and similar electrical appliances - safety: Part 2-76: Particular requirements for electric fence energizers
Electricity Supply Act 1990 [Act 447]
Electricity Supply (Electrical Product And Appliance Safety) Regulations 2008
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES (SECOND REVISION)