P-HG-50211-28-DS Rev 01 Pump Technical Data Sheet for Misc. Horizontal Pumps Sl No. Description ACW Booster Pump 1.00 GENERAL 1.01 Designation ACW Booster Pump 1.02 Type of Pump Horizontal centrifugal 1.03 Service Clarified Water 1.04 Pump Duty Continuous 1.05 Pumps to be designed for parallel operation Yes 1.06 Pump Manufacturer WPIL LIMITED 1.07 Model / Size WP MF 200/320 2.00 TECHNICAL PARAMETERS 2.01 Performance standard HIS 2.02 Nos. of Pumps required Eighteen (18) 2.03 Nos. of Pumps working Twelve (12) 2.04 Nos. of Pumps standby Six (6) 2.05 Liquid handled Clarified Water 2.06 Design Liquid Temperature 35ºC 2.07 Suction Lift or Suction Head Flooded suction 2.08 Rated Flow in M 3 /Hr 550
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
P-HG-50211-28-DS Rev 01
Pump Technical Data Sheet for Misc. Horizontal Pumps
Sl No. Description ACW Booster Pump
1.00 GENERAL
1.01 Designation ACW Booster Pump
1.02 Type of Pump Horizontal centrifugal
1.03 Service Clarified Water
1.04 Pump Duty Continuous
1.05 Pumps to be designed for parallel operation
Yes
1.06 Pump Manufacturer WPIL LIMITED
1.07 Model / Size WP MF 200/320
2.00 TECHNICAL PARAMETERS
2.01 Performance standard HIS
2.02 Nos. of Pumps required Eighteen (18)
2.03 Nos. of Pumps working Twelve (12)
2.04 Nos. of Pumps standby Six (6)
2.05 Liquid handled Clarified Water
2.06 Design Liquid Temperature 35ºC
2.07 Suction Lift or Suction Head Flooded suction
2.08 Rated Flow in M3/Hr 550
P-HG-50211-28-DS Rev 01
Sl No. Description ACW Booster Pump
2.09 Pump Total Dynamic Head, MWC 13
2.10 Losses in Pump in MWC NIL
2.11 Pump Shut-off head in MWC (Prefer upto 140% of pump operating
head)
21
2.12 Range of operation of the pump _30 % to __125 % of rated capacity
2.13 Rated speed in rpm 1474
2.14 NPSHR in MWC (at suction flange
inlet)
3.8
2.15 Nos. of Stages 1
2.16 Pump overall efficiency at Duty point in %
80.00 %
2.17 Rotation viewed from coupling end CW
2.18 Suction specific speed 10493
3.00 POWER CONSUMPTION
3.01 Guaranteed pump shaft input power at rated condition, KW
24.35
3.02 Maximum pump input power at shut-off head
22
3.03 Motor kW rating 30
4.00 DESIGN AND CONSTRUCTION
FEATURES
4.01 Max. Impeller Diameter in mm 340 MM
4.02 Suction nozzle size and rating 250 mm
P-HG-50211-28-DS Rev 01
Sl No. Description ACW Booster Pump
4.03 Discharge nozzle size and rating 200 mm
4.04 Type of Pump casing BACK PULL OUT
4 13 Shaft sealing arrangement sealing liquid
Gland packing
4.14 Near Field Noise Level 85dBA
5.00 MATERIALOFCONSTRUCTION
5.01 Casing 2 % Ni-Cl to IS 210 FG 260
5.02 Impeller Stainless steel ASTM -A-351-CF8M.
5.03 Shaft Stainless steel, SS 410
5.04 Shaft sleeve 316 Stainless steel
5.05 Base Plate MS FAB.
6.00 INSPECTION AND TESTING
6.01 Material Test
6.02 Hydrostatic test pressure (bar)(1.5 times SOH
6
6.03 Duration of test in minutes 15 min
6.04 Vibration HIS
7.00 PERFORMANCE TEST
7.01 Performance Testing standard HIS
7.02 NPSH R test NO
7.03 Dynamic balancing test Yes
P-HG-50211-28-DS Rev 01
Sl No. Description ACW Booster Pump
8.00
DRIVE MOTOR
8.01 Type Induction Motor 415 V, 3 Phase, 50 HZ, TEFC
8.02 RPM 1474
9.00 WEIGHT DATA
9.01 Approximate weight of the pump in Kg 290 kg
9.02 Approximate weight of the motor in Kg
365 kg
P-HG-50191-93-DS Rev 01
Pump Technical Data Sheet for Misc. Horizontal Pumps
Sl No. Description Boiler Fill Pump
1.00 GENERAL
1.01 Designation Boiler Fill Pump
1.02 Type of Pump Horizontal centrifugal
1.03 Service DM water (Chemical dosed for PH correction)
1.04 Pump Duty Intermittent
1.05 Pumps to be designed for parallel operation
Yes
1.06 Pump Manufacturer WPIL LIMITED
1.07 Model / Size WP 65/320
2.00 TECHNICAL PARAMETERS
2.01 Performance standard HIS
2.02 Nos. of Pumps required Three (3)
2.03 Nos. of Pumps working Two (2)
2.04 Nos. of Pumps standby One (1)
2.05 Liquid handled DM water(Chemical dosed for PH correction)
2.06 Design Liquid Temperature 35ºC
2.07 Suction Lift or Suction Head Flooded suction
2.08 Rated Flow in M3/Hr 100
P-HG-50191-93-DS Rev 01
Sl No. Description Boiler Fill Pump
2.09 Pump Total Dynamic Head, MWC 101
2.10 Losses in Pump in MWC NIL
2.11 Pump Shut-off head in MWC (Prefer upto 140% of pump operating
head)
120
2.12 Range of operation of the pump _30 % to __125 % of ratedd capacity
2.13 Rated speed in rpm 2960
2.14 NPSHR in MWC (at suction flange
inlet)
4
2.15 Nos. of Stages 1
2.16 Pump overall efficiency at Duty point in %
64.00%
2.17 Rotation viewed from coupling end CW
2.18 Suction specific speed 8827.03
3.00 POWER CONSUMPTION
3.01 Guaranteed pump shaft input power at rated condition, KW
42.98
3.02 Maximum pump input power at shut-off head
23
3.03 Motor kW rating 55
4.00 DESIGN AND CONSTRUCTION
FEATURES
4.01 Max. Impeller Diameter in mm 329 MM
4.02 Suction nozzle size and rating 100 mm
P-HG-50191-93-DS Rev 01
Sl No. Description Boiler Fill Pump
4.03 Discharge nozzle size and rating 65 mm
4.04 Type of Pump casing BACK PULL OUT
4 13 Shaft sealing arrangement sealing liquid
Gland packing
4.14 Near Field Noise Level 85dBA
5.00 MATERIALOFCONSTRUCTION
5.01 Casing SS ASTM - A-351-CF8M.
5.02 Impeller Stainless steel ASTM -A-351-CF8M.
5.03 Shaft Stainless steel, SS 410
5.04 Shaft sleeve 316 Stainless steel
5.05 Base Plate MS FAB.
6.00 INSPECTION AND TESTING
6.01 Material Test
6.02 Hydrostatic test pressure (bar)(1.5 times SOH
18
6.03 Duration of test in minutes 15 min
6.04 Vibration HIS
7.00 PERFORMANCE TEST
7.01 Performance Testing standard HIS
7.02 NPSH R test NO
7.03 Dynamic balancing test Yes
P-HG-50191-93-DS Rev 01
Sl No. Description Boiler Fill Pump
8.00
DRIVE MOTOR
8.01 Type Induction Motor 415 V, 3 Phase, 50 HZ, TEFC
8.02 RPM 2960
9.00 WEIGHT DATA
9.01 Approximate weight of the pump in Kg 170 kg
9.02 Approximate weight of the motor in Kg
515 kg
P-HG-50236-38-DS Rev 01
Pump Technical Data Sheet for Misc. Horizontal Pumps
Sl No. Description CT Make up Pumps
1.00 GENERAL
1.01 Designation CT Make up Pumps
1.02 Type of Pump Horizontal centrifugal
1.03 Service Clarified Water
1.04 Pump Duty Continuous
1.05 Pumps to be designed for parallel operation
Yes
1.06 Pump Manufacturer WPIL LIMITED
1.07 Model / Size 14MN16A
2.00 TECHNICAL PARAMETERS
2.01 Performance standard HIS
2.02 Nos. of Pumps required Three (3)
2.03 Nos. of Pumps working Two (2)
2.04 Nos. of Pumps standby One (1)
2.05 Liquid handled Clarified Water
2.06 Design Liquid Temperature 35ºC
2.07 Suction Lift or Suction Head Flooded suction
2.08 Rated Flow in M3/Hr 1700
P-HG-50236-38-DS Rev 01
Sl No. Description CT Make up Pumps
2.09 Pump Total Dynamic Head, MWC 23
2.10 Losses in Pump in MWC NIL
2.11 Pump Shut-off head in MWC (Prefer upto 140% of pump operating
head)
34.56
2.12 Range of operation of the pump _30 % to __125 % of rated capacity
2.13 Rated speed in rpm 1486
2.14 NPSHR in MWC (at suction flange
inlet)
9.2
2.15 Nos. of Stages 1
2.16 Pump overall efficiency at Duty point in %
81.00 %
2.17 Rotation viewed from coupling end CCW
2.18 Suction specific speed 9945
3.00 POWER CONSUMPTION
3.01 Guaranteed pump shaft input power at rated condition, KW
131.46
3.02 Maximum pump input power at shut-off head
37.3
3.03 Motor kW rating 150
4.00 DESIGN AND CONSTRUCTION
FEATURES
4.01 Max. Impeller Diameter in mm 406.4 MM
4.02 Suction nozzle size and rating 350 mm
P-HG-50236-38-DS Rev 01
Sl No. Description CT Make up Pumps
4.03 Discharge nozzle size and rating 350 mm
4.04 Type of Pump casing Radially Split End Suction
4 13 Shaft sealing arrangement sealing liquid
Gland packing
4.14 Near Field Noise Level 85dBA
5.00 MATERIALOFCONSTRUCTION
5.01 Casing 2 % Ni-Cl to IS 210 FG 260
5.02 Impeller Stainless steel ASTM -A-351-CF8M.
5.03 Shaft Stainless steel, SS 410
5.04 Shaft sleeve 316 Stainless steel
5.05 Base Plate MS FAB.
6.00 INSPECTION AND TESTING
6.01 Material Test
6.02 Hydrostatic test pressure (bar)(1.5 times SOH
6
6.03 Duration of test in minutes 15 min
6.04 Vibration HIS
7.00 PERFORMANCE TEST
7.01 Performance Testing standard HIS
7.02 NPSH R test NO
7.03 Dynamic balancing test Yes
P-HG-50236-38-DS Rev 01
Sl No. Description CT Make up Pumps
8.00
DRIVE MOTOR
8.01 Type Induction Motor 415 V, 3 Phase, 50 HZ, TEFC
8.02 RPM 1486
9.00 WEIGHT DATA
9.01 Approximate weight of the pump in Kg 1400 kg
9.02 Approximate weight of the motor in Kg
1260 kg
P-HG-50199-210-DS Rev 01
Pump Technical Data Sheet for Misc. Horizontal Pumps