Product data sheet TAISON Product Codes Material and Finish LED Characteristics Electrical Input Ÿ Injection moulded polycarbonate TETWI300E LED chip type Life expectancy Board lumens Rated input voltage Rated input frequency Charging time Weight KG Dimensions LED 1.5 kg TETWI300E Emergency Range / Twinsopt Ÿ LED indicator light and push button test switch. IP 65 LED warranty on-site 2 RoHS COMPLIANT 3 Hrs 296 75 272 Rated power Taison Lighting, The Focus Centre, Ingleby Road, Bradford, BD7 2AT Tel: 01274 521550 www.taisonlighting.com This product specification contains data based on typical performance at nominal power. Actual values stated may depend on the drive OR ballast and its application. Data is compiled by performing tests carried out in a controlled environment and is a representation of relative performance at the relevant nominal voltage. Actual performance figures can vary depending on operating conditions. NOTE: Data is subject to change without any prior notice. 20,000 hrs 300lm 6W ~230-240V AC 50-60Hz 24 hrs (initial charge 36 hrs) 300lm 6W Battery charging current 150~180mA 400~600mA Battery discharging current SMD Operation temperature -20 to +45°C No. of LED 30 Ÿ Suitable for wall mounting. Ÿ Emergency operation time > 3h