DashCam User Manual - images-na.ssl-images-amazon.com · DashCam User Manual MODEL: S6G Camera Requirements Class 10 or higher Micro SD/SDHC memory card. Supported memory sizes range

DashCam User Manual

MODEL: S6G

Camera Requirements Class 10 or higher Micro SD/SDHC memory card. Supported memory sizes range from 8GB to 256GB (not

included).

Card Recommendations

Kingston Canvas Go! Micro SD SanDisk High Endurance Micro SD NOTE: Please don't use SanDisk Ultracards with our cameras.

I.Product Overview

This product is a smart HD vehicle travelling video recorder with Wi-Fi and remote control. It

supports FHD 1080P camera shooting and has a clear night view effect. It is mainly used for

car-borne video recording. Please read this manual carefully prior to use and keep it properly. We

hope this product can satisfy your need and serve you for long!

II. Product Structure and Description

1、Micro SD card slot 2、Reset key 3、USB port

4、Indicator lights（Blue/Red） 5、POWER/Sound Key 6、FUNC key

7、Remote control

POWER /Sound key: In power off mode, press and hold it for 3 seconds to turn on the unit, press and hold it again for 3 seconds to turn off the unit; in recording mode, press it to turn off sound recording, and press it again to turn on sound recording FUNC key: In power on mode,press it to start video recording and press it again to pause video recording; in power on mode,press and hold it for 5 seconds to restore the factory settings, and the blue light flashes quickly in this process. Indicator lights: Blue light is system indicator, which turns on in standby mode and flashes in video recording mode. Red light is sound recording indicator, which turns on during sound recording and turns off when sound recording stops. Reset key: Press it to restore the factory settings. USB port: Connect to the power supply to charge the machine. Also connect to the computer via the micro-USB computer cable . Remote control: In video recording mode, press the remote control to capture a picture and a video(15 seconds).

III.Product Features Built-in Wi-Fi: Connecting your smart phone to the OSBOO S6G using its built-in Wi-Fi function allows you

to save recordings to your device. This makes it easier than ever to share footage from your trips, no

matter where you are. Recording: Insert the Micro SD card before use. Then the device will start the video automatically when it is connect the power supply, and the blue light will flicker. Press the POWER key to stop the video, and the blue light will stop flicker. Video playback: you can play back videos and photos in mobile APP. Gravity sensor: The unit integrates built-in acceleration sensor; if a serious collision occurs, the recorder will lock the current video when the accident occurs, and the locked image won’t be overwritten. Loop recording: This product allows loop recording and avoids frame lost. Three minutes for each video file. GPS positioning: GPS automatic positioning after the Dash Cam starts recording. when you hear the sound of “Didi”, GPS positioning succeeds. Micro SD card format: Connect mobile APP to DashCam. Open the APP and enter the real-time

video interface, then click which on the top right corner. Select“Format” to format the

Micro SD card.

IV.APP Operation Guide

Step 1: Install the mobile terminal APP

Scan the QR code with your mobile phone to install APP “Road Cam”.

Also You can download the iOS version of the “RoadCam” APP from APP Store, and download the

Android version of“RoadCam” APP from Google Play.

Step 2: Connect to Wi-Fi

1. Turn on the Dash Cam and start video;(Insert the Micro SD card before use)

2. Open the “Road Cam”APP ;（As shown in Figure 1）

3. Click the“Connect other device”into “Wi-Fi” page, and select “DashCam_XXX”. Default

password: 12345678; (As shown in Figure 2）

4.Click “ADD”to connect the device, then run the “Road Cam” APP. (As shown in Figure 3）

Figure 1 Figure 2 Figure 3 Step 3: Sharing video or photo

1. If you want to share videos and photos, please register and login first.

2. Click “recorded video”in the real-time video interface, then select video from the

“Loop”and “Emergency” which you need to share, press and hold the video, click on the

“Download”icon in the lower left corner. (As shown in Figure 4）

3.You can view the videos or photos you downloaded in the APP’S album. (As shown in Figure

5）

4.Go to the “album”and choose the video which you want to share, click the“Clip”to clip

the video. then click “clip select clip”to finish clip. then click the “next step”in the upper

right corner to share with third-party platforms. (As shown in Figure 6）

5.Go to the “album” and choose the photo which you want to share, click the “share”in the

upper right corner to share with third-party platforms.

Figure 4 Figure 5 Figure 6

Step 3: View the GPS trajectory

1.Click “recorded video”in the real-time video interface, then select video from the

“Loop”and “Emergency” which you need to view the GPS trajectory, press and hold the

video, click on the “Download”icon in the lower left corner.

2.TO choose the video which you just downloaded in the APP’S album.

3.Click the “GPS”icon and you can see the video trajectory.

Remark: 1. The above instructions are based on Android mobile phones, If you are an iPhone user, please find the “DashCam_XXX” in the Wi-Fi settings of iPhone to connect.(Default password: 12345678) Then open the “RoadCam” APP and click camera icon to use it after successful connection. The operating method is basically the same as Android phone.

1. Clip videos before sharing .

2. Download the video before viewing the GPS trajectory.

V.Installation Guide 1.Turn off the engine of the vehicle. 2.Insert the Micro SD (TF) card into the Micro SD (TF) slot of the DashCam. 3.Fix the DashCam on the front windshield of the vehicle with a bracket. 4.Insert the car charger into the car cigarette lighter.

5.Connect the Dash Cam to the car charger with a USB extension cable. [Note] In wiring, lay the USB extension cable along the edge of the windshield of the vehicle as shown in the figure:

6.Adjust the position of the lens and ensure that the lens is parallel to the ground. 7.Start the engine to check if the device is installed correctly. [Note] After the device is installed correctly, the video indicator light (blue) will be on. And the device will be started and enter the video recording state, and the video indicator light will flicker in blue.

VI. Specifications

Product Brand OSBOO

Product Name Dash Cam

Product Model S6G

DSP Novatek NT96658

Video Resolution 1920×1080P,30FPS

Image Sensor Sony Exmor IMX323

Camera Lens 140 degree ultra wide angle lens and WDR

GPS Synchronous track

Wi-Fi APP Connect to mobile APP

Remote control Capture pictures and video

Storage Micro SD Card, Class 10, from 8GB to 256GB (not included)

Languages English/Portuguese/Chinese/Japanese/Russia/Ukrainian/Thai

Power Pupply 5V, 1.5A

Battery Capacity 170mAh

Temperature Resistance 5°(F) to 160°(F) storage temperature

VII. Caution

1.Use the dedicated power adaptor prepared by our company, for using an unqualified adaptor may be harmful to the product, or even burn the product. 2.Do not use the product in a humid and high temperature environment. 3.Keep the lens clean lest the video recording effect be affected. 4.To safeguard your lawful rights and interests, do not dismantle the product without authorization. 5.Abide by the laws of the country where the user is, and do not use the product for any illegal usage, or the consequence shall be borne by the user.

VIII. Troubleshooting

Scenes Fault Reason/Solution

During

Installation

Bracket falls off

easily

Remove the dust-proof film on the bracket before installation

and keep the glass in the adsorption position clean

Image is blurred

The front windshield has a reflective effect. Please adjust the

tilt angle of the recorder according to the mounting position of

the bracket

Daytime and

night effects vary

widely

The transmittance of commonly used front windshield

insulation film ranges from 68% to 80%, which will affect the

video effect in daytime and night

The recorder is

often powered

off

Please adjust the rotation angle of the charger according to the

car model, and avoid the position of loose structure

During

Boot

Unable to start Check if the car charger indicator is on; if not, please re-plug

the charger and press the Reset key to reboot

Press the Reset key to reboot

Replace the micro SD memory card (Class 10 Micro SD memory

card recommended)

Recording

video

Video recording

isn’t

automatically

started at boot

Check if there is a Micro SD memory card inserted

Re-plug the Micro SD memory card after power off

Format or replace the Micro SD memory card

Video recording

is aborted

Press the FUNC key to start the recording manually

Format the Micro SD memory card

Replace the Micro SD memory card (Class10 Micro SD memory

card recommended)

There is no sound

in the video

Check if it is in silent mode (whether the red LED is on)

In video recording mode, press the POWER key to turn on or

off the sound recording function

Video is blurred Check if the lens protection film is removed

Check if the windshield or recorder lens is dirty

Recording time is

wrong

The recorder time is automatically updated when it is

connected to the mobile phone

Remote control is

invalid Replace the battery of the remote control

Connecting

to PC

Can’t find an

external storage

device

Replace the USB computer cable or use other USB interface

Wi-Fi

connecting

The mobile

phone can’t

connect to the

DashCam

Check if there is a micro SD memory card inserted or replaced

Make sure Wi-Fi is turned on

Force to close and re-run the APP

Recorded video

can’t be played

on the mobile

phone

It may be related to the player or mobile phone system; it is

recommended to use the computer to read the Micro SD

memory card and play video

Connection

waiting time is

too long

If there are too many Wi-Fi signals in the surrounding

environment, the connection may fail due to inter-signal

interference. It is recommended to use the DashCam in the

environment with less Wi-Fi interference

The mobile phone may be busy; it is recommended to close

other APPs or restart the phone

Forget the APP

connection

password

Press and hold the FUNC key for 5 seconds to restore the

factory settings and restore the initial password

※Thank you for your purchase! Hope this device can give you the best surprise! Your satisfaction

is our biggest wish! Any good ideas, please contact our online store. Thank you!