Page 1 DANTESHWARI MAIYA SAHAKARI SHAKKAR KARKHANA MARYADIT, BALOD (CHHATTISHGARH) Sr. Description/Specification of material Make Unit Temperature Gauge, 1 WAREE 2 nos Thermostatic 2 WAREE 4 nos Thermostatic 3 WAREE 4 nos Thermostatic 4 WAREE 4 Nos Thermostatic Pressure Gauge, 5 Range- 0 to 100Kg/cm2,Threaded 1/2" NPT(M), with IBR, Dial size-250mm GENERAL 8 nos WAREE 6 Range- 0 to 7Kg/cm2,Threaded 1/2" NPT(M), with IBR, Dial size-250mm GENERAL 8 nos WAREE Tiwac 7 Range- 0 to 15Kg/cm2,Threaded 1/2" NPT(M), Dial size - 6" dia GENERAL 4 nos WAREE Tiwac 8 Range- 0 to 10Kg/cm2,Threaded 1/2" NPT(M), Dial size - 6" dia GENERAL 4 nos WAREE Tiwac 9 Range- 0 to 7Kg/cm2,Threaded 3/8" NPT(M), Dial size - 4" dia GENERAL 4 nos WAREE Tiwac 10 Range - 0 to 7 kg/cm2, 3/4" NPT(M)connector, dial size - 4" dia. GENERAL 10 nos WAREE Tiwac 11 Range - 0 to 7 kg/cm2, 1/2" NPT(M)connector, dial size - 4" dia. GENERAL 6 nos WAREE 12 ISI 4 Qty.Req. Cost in Unit (In Rs.) Total cost including all duties (In Rs.) Ramraks Instrumentation (Authorised dealer/Manufacturer/Supplier) Range - 0 to 600ºC, ½" NPT male connector, 200mm insertion length Dial size - 4" dia Pionior Range - 0 to 100ºC, ½" NPT female connector, 90mm insertion length Dial size - 4" dia Pionior Range -0 to 300ºC , ½" NPT female connector, 90mm insertion length Dial size - 4" dia Pionior Range - 0 to 150ºC , 1/2" NPT female connector, 120mm insertion length Dial size -110mm dia. Pionior Tiwac Tiwac 1/2 inch glass tube length 2 mtrs pcs
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Butterfly Valve with position monitoring unit, Size- 125mm, Double acting shaft rotation CCW, Model- D1WP. Deltorq
Butterfly Valve Size- DN150/50 Psi with position monitoring unit, Actuator Size- 85 mm, Double acting shaft rotation CCW. ¼” air supply.
Auto manual station, pannel mount electornic 4 digit display with zero & span adjustment, 230 V AC, no. of I/p - 1, no. of o/p - 1, I/p - 4 to 20mA, O/p - 4 to 20mA, Cut out size - (68 x 68) mm.
Universal Calibrator (mA & mV source) Complete set
Online pH Analyzer (for Boiler water) with sensor and built-in digital display with auto calibration,Range 0 to 14pH, field mount
Complete set
Online pH Analyzer (for Juice) with sensor and built-in digital display with auto calibration, Range 0 to 14pH, field mount
Complete set
Boiler Flue gas online CO2 analyzer with sensor, Range 0 to 20% CO2. analog output 4 to 20mA for 0 to 20% CO2, 230V AC 50HZ, Field mout sensor unit and pannel mount display unit.
Complete set
mtrs
mtrs
Page 3
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
35 M.S. Nipple size 1/2" ISI 10 nos
36 M.S. Nipple size 3/8" ISI 10 nos
37 M.S. Reducer 1/2" to 3/8" ISI 10 nos
38 M.S. Reducer 3/8" to 1/2" ISI 10 nos
39 M.S. Reducer 1" to 1/2" ISI 10 nos
40 CE Standard Company 1 Complete set
41 CE Standard Company 1 Complete set
42 DIGITAL PID CONTROLLER model - PID 5030 MASIBUS 1 set
43 Large Display Indicator, Model - 405-4IN MASIBUS 1 set
44 CE Standard Company 1 set
Sr. Make Unit
1
GM/SS wheel screwed end valve 40mm (I S -778)
20 NoPURI
2
GM/SS wheel screwed end valve 25mm(IS-778)
20 NoPURI
3
GM/SS wheel screwed end valve 20mm
20 NoPURI
4 CI GLOBE VALVE 20MM 2 Nos.
5 5 Nos.Leader
6 5 Nos.Leader
Auto Cane Feeding Control (ACFC) System for Mill with SCADA (including instalation and commissioning)
Auto Cane Feeding Control (ACFC) System for Mill without SCADA (including instalation and commissioning)
Temperature Selector Switch suitable for Thermocouple k type, 32 positions (suitable for 16 thermocouple connections) Panel Mount.
MECHANICAL Qty.Req.Cost in Unit (In Rs.)
Total cost including all duties (In Rs.)
Ramraks
Pelican
ElemsPelican
ElemsPelican
Elems
Elems
C.I. Sluice valve non rising 50 mm having SS spindle & SS working parts flange to flange distance 215mm, no. of holes 4 , PCD 125mm.IS 780
pelicon
PuriElems
C.I. Sluice valve non rising 65 mm having SS spindle & SS working parts flange to flange distance 230mm, no. of holes 4 , PCD 145mm.IS 780
pelicon
PuriElems
Page 4
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
7 5 Nos.Leader
8 2 Nos.Leader
9 2 Nos.Leader
10 1 NoLeader
11 2 Nos.Leader
12 3 Nos.Leader
13 6 Nos.Leader
14 C.I. Cock valve 2" PURI 2 Nos.
15 G.M. cock valve 1/2" screwed end PURI 6 Nos.
16 Butterfly valve 100mm PURI 1 No.
17 Butterfly valve 50 mm PURI 1 No.
18 Butterfly valve 80 mm PURI 1 No.
19 G.M./SS drain valve 25 mm screw end PURI 10 Nos.
20 PURI 4 Nos.
21PURI
2 Nos.
22PURI
2 Nos.
23PURI
2 Nos.
24PURI
2 Nos.
25PURI
2 Nos.
C.I. Sluice valve non rising 80 mm having SS spindle & SS working parts flange to flange distance 230mm, no. of holes 4 , PCD 145mm.IS 780
pelicon
PuriElems
C.I. Sluice valve non rising 100 mm having SS spindle & SS working parts flange to flange distance 255mm, no. of holes 8 , PCD 180mm.IS 780
pelicon
PuriElems
C.I. Sluice valve non rising 125 mm having SS spindle & SS working parts flange to flange distance 265mm, no. of holes 8 , PCD 210mm.IS 780
pelicon
PuriElems
C.I. Sluice valve non rising 150 mm having SS spindle & SS working parts flange to flange distance 280mm, no. of holes 8 , PCD 140mm.IS 780
pelicon
PuriElems
C.I. Sluice valve rising spindle 150 mm, flange to flange distance 280mm, no. of holes 8, PCD 150mm.IS 780
pelicon
PuriElems
C.I. Sluice valve rising spindle 65 mm, Flange to flange distance 230mm, no. of holes 4, PCD 145mm.IS 780
pelicon
PuriElems
C.I. Sluice valve rising spindle 100 mm Flange to flange distance 250mm, no. of holes 8, PCD 190mm.IS 780
pelicon
PuriElems
G.M./SS gate valve flanged end 50mm heavy duty
CI Right angle valve rubber sheeted 125 mmPelicon
CI Right angle valve rubber sheeted 50 mmPelicon
CI Right angle valve rubber sheeted 100 mmPelicon
C.I. Non return valve 2", flange to flange distance 200mm, no. of holes 4 , PCD 125mm.IS 780 Pelicon
C.I. Non return valve 65 mm, flange to flange distance 215mm, no. of holes 4 , PCD 140mm.IS 780
Page 5
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks25 2 Nos.
26PURI
2 Nos.
27PURI
2 Nos.
28PURI
2 Nos.
29PURI
4 Nos.
30 Pelican 4 Nos.
31 GM Globe valve15mm (IS-778) Screw end ISI 30 Nos.
32 GM Globe valve25mm (IS-778) Screw end ISI 5 NOS
Heavy dutyDouble Row spherical roller bearing 23148CCKW33
Page 12
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
105 Ball Bearing 6410 ZZ
SKF
5 nosAEC
FAG
NBC
106 Tapper Roller Bearing 32212 ACE
SKF
2 nosAEC
FAG
NBC
107 Tapper Roller Bearing 32311
SKF
2 nosAEC
FAG
NBC
108 Tapper Roller Bearing 32307/Q
SKF
2 nosAEC
FAG
NBC
109
SKF
1 noAEC
FAG
NBC
110 bearing 21310 E
SKF
10 nosAEC
FAG
NBC
111 Roller bearing 22222 CCK W33
SKF
10 nosAEC
FAG
NBC
112 Tapper Roller Bearing 32308
SKF
2 nosAEC
FAG
NBC
113 Plumber block SM 519
SKF
2 nosAEC
FAG
NBC
114 Plumber block P 210
SKF
2 nosAEC
FAG
NBC
115 Plumber block 3148 TS1548 O Ring 4x750
SKF
2 nosAEC
FAG
Self alinging Double row spherical roller bearing 22228CC K /W33
Page 13
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
115 Plumber block 3148 TS1548 O Ring 4x750
NBC
2 nos
116 Plumber block T 210 (NTN)
SKF
2 nosAEC
FAG
NBC
117
SKF
2 nosAEC
FAG
NBC
118 Plumber block SN 528
SKF
2 nosAEC
FAG
NBC
119 Plumber block SN 511
SKF
4 nosAEC
FAG
NBC
120 Plumber block SN 516
SKF
2 nosAEC
FAG
NBC
121 Plumber block SN 512
SKF
2 nosAEC
FAG
NBC
122 CS housing for Bearing no. 22230 ckw33
SKF
2 nosAEC
FAG
NBC
123 Roller bearing 22222CKC3AEC
2 nosZKL
124 Bearing 6308ZSKF
5 nosAEC
FAG
125 Bearing NU 308SKF
2 nosAEC
FAG
126 Bearing 23120SKF
1 noAEC
FAG
127 Bearing 6307SKF
1 noAEC
C I Plumber block SN522 withgrease nipple andfelt seal locating ring FRB 13.5/200
Page 14
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks127 Bearing 6307
FAG
1 no
128 Bearing 32212SKF
2 nosAEC
FAG
129 Bearing 6409Z
SKF
3 nosAEC
FAG
130 Bearing 7307
SKF
4 nosAEC
FAG
131 Bearing 30207
SKF
5 nosAEC
FAG
132 Bearing 30305
SKF
2 nosAEC
FAG
133 Bearing 30206
SKF
2 nosAEC
FAG
134 Bearing 23128K
SKF
4 nosAEC
FAG
135 Bearing 32215
SKF
10 nosAEC
FAG
136 Ball bearing 6204
SKF
6 NosAEC
FAG
NBC
137 Ball bearing 6218
SKF
6 NosAEC
FAG
NBC
138 Ball bearing 6314
SKF
6 NosAEC
FAG
NBC
139 Ball bearing 6318
SKF
6 NosAEC
FAG
Page 15
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
139 Ball bearing 6318
NBC
6 Nos
140 Ball bearing 6319
SKF
6 NosAEC
FAG
NBC
141 Ball bearing 6322
SKF
6 NosAEC
FAG
NBC
142
SKF
6 NosAEC
FAG
NBC
143 Bearing NU209
SKF
6 NosAEC
FAG
NBC
D. Nut and Bolts
M.S.Nut & Bolts (full Threads)straigth-4.6
144 Size 10x35 mmGKW
3 kgsANY ISI
145 Size 10x40 mmGKW
5 kgsANY ISI
146 Size 10x50 mmGKW
10 kgsANY ISI
147 Size 12x40 mm half thread with Nylock NutGKW
100 kgsANY ISI
148 Size 12x75 mmGKW
10 kgsANY ISI
149 size 12x100mmGKW
5 kgsANY ISI
150 size 12x150mmGKW
5 kgsANY ISI
151 nyloc nut 20mmGKW
40 NosANY ISI
152 size 8x40mmGKW
1 kgANY ISI
153 Size 10x100mmGKW
3 kgsANY ISI
154 Size 8x100 mmGKW
1 kgANY ISI
Plumber bearing SN 522with grease nipple and felt seal locating ring FRB -13.5/200
Page 16
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
155 Size 8x30 mmGKW
1 kgANY ISI
156 Size 8x35 mmGKW
2 kgsANY ISI
157 Size 8x40 mmGKW
2 kgsANY ISI
158 Size 16x50 mmGKW
50 kgsANY ISI
159 Size 16x60mmGKW
50 kgsANY ISI
160 Size 16x75 mmGKW
80 kgsANY ISI
161 Size 16x65 mmGKW
10 kgsANY ISI
162 Size 16x100 mmGKW
2 kgsANY ISI
163 Size 16x150 mmGKW
5 kgsANY ISI
164 Size 3x15 mmGKW
1 kgANY ISI
165 Size 6x20 mm GKW
2 kgsANY ISI
166 Size 6x24 mm GKW
2 kgsANY ISI
167 Size 20x60mm Half threadGKW
50 kgsANY ISI
168 Size 20x75 mm Half threadGKW
50 kgsANY ISI
169 Size 20x85 mm Half threadGKW
30 kgsANY ISI
170 Size 20x150mmGKW
25 kgsANY ISI
171 Size 20x90 mm GKW
20 kgsANY ISI
172 Nyloc Nut 12 mmGKW
6000 NosANY ISI
173 Nyloc Nut M 24 x 1.5 mm pitchGKW
10 NosANY ISI
174 Nyloc Nut M 16mmGKW
150 NosANY ISI
175 stud 12 x 50 mm GKW
75 nosANY ISI
Page 17
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
176 stud 1/2"x 150 mm GKW
50 nosANY ISI
177 SS stud 5/8 inch 11 TPI ,Length 62mmGKW
100 nosANY ISI
178 Stud 12x100 mmGKW
20 nosANY ISI
179 Stud 10x50 mmGKW
50 nosANY ISI
180 stud 16 x 125 mm GKW
100 nosANY ISI
181 stud 8 x 50 mmGKW
25 nosANY ISI
182 stud 8 x 75 mmGKW
25 nosANY ISI
183 stud 8 x 100mmGKW
50 nosANY ISI
184 stud 16x50 mm GKW
20 nosANY ISI
185 Nyloc Nut M 22 x 1.5 mm pitchGKW
30 nosANY ISI
186 MSStud M18X60 MMGKW
50 nosANY ISI
187 stud M 16X100 MMGKW
20 nosANY ISI
188 MS Nut Bolt 10X75 MMGKW
5 kgsANY ISI
189 MS Nut Bolt 12X30 MMGKW
10 kgsANY ISI
190 MS Nut Bolt 16X125 MMGKW
10 kgsANY ISI
191 MS Nut Bolt 8X50 MMGKW
1 kgANY ISI
192 MS Nut Bolt 8X75 MMGKW
1 kgANY ISI
193 MS Nut Bolt 20X100 MMGKW
10 kgsANY ISI
S.S.Allenkey bolt
194 Size 12x40 mm ANY ISI 15 nos
195 Size 12x50 mm ANY ISI 50 nos
196 Size 6x25 mm ANY ISI 10 nos
Page 18
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
197 Size 10x50 mm ANY ISI 10 nos
198 Size 20x50mm ANY ISI 5 nos
199 Size 12x30 mm ANY ISI 20 nos
200 Size 12x40mm ANY ISI 20 nos
201 M.S. washer 1", 2", 1/2", 3/8", 5/8", 3/4" ANY ISI kg
202 M.S. washer 25mm , Thickness 1mm ANY ISI 10 kg
203 M.S. washer 28 mm , Thickness 1mm ANY ISI 10 kg
204 ANY ISI 1 kg
205 M.S. Spring washer 6mm ANY ISI 2 kg
206 M.S. Spring washer 8mm ANY ISI 2 kg207 M.S. Spring washer 10mm do 3 kg
208 M.S. Spring washer 12mm do 4 kg
209 M.S. Spring washer 16mm do 1 kg
210 Counter shunk bolt 10x35 d0 25 nos
211 M.S. Spring washer 20mm do 1 kg
212 MS Counter shunk bolt 10x20 do 25 kg
213 Chain 3/8'' do 20 mtrs214 Counter shunk bolt 5/8'' x3'' do 25 nos
215 S.S.Bolt 18x50mm Pitch 2.5mm Full thread do 60 nos
216 S.S.Bolt 1/4"x3/8" BSW Threads do 2 kg
E. M.S. Plates, M.S. Angle and M.S. Channel
MS Plate 5mm TATA/ SAIL /JINDAL 500 KG
217 M.S.Plate 3mm Size 1.2mx6 mTATA
200 kgSAIL
JINDAL
218 M.S. Plate 10mm Size 1.2mx6 mTATA
1000 kgSAIL
JINDAL
219 M.S. Plate 16mm Size 1.2mx6 mTATA
1000 kgSAIL
JINDAL
220 M.S. Plate 12mm Size 1.2mx6 m
TATA
1000 kgSAIL
JINDAL
221 MS Plate 6mm Size 1,5 m x6mTATA
1000 kgSAIL
JINDAL
222 M.S. Angle 50x50x6 mmTATA
100 kg
2 (each)
M.S. washer 1.5"
Page 19
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
222 M.S. Angle 50x50x6 mm SAIL 100 kgJINDAL
223 M.S. Angle 65x65x8 mmTATA
200 kgSAIL
JINDAL
224 M.S. Angle 75x75x6 mmTATA
200 kgSAIL
JINDAL
225 M.S. Channel 65x125mmTATA
1000 kgSAIL
JINDAL
226 M.S. Channel 65X150TATA
500 kgSAIL
JINDAL
227 M.S. Channel 50x100 mmTATA
200 kgSAIL
JINDAL
228 M.S. Channel 75x150 mmTATA
500 kgSAIL
JINDAL
229 M.S. channel 75x200mmTATA
500 kgSAIL
JINDAL
230 MS Flat size 50mm x 6mm
TATA
200 kgSAIL
JINDAL
231 MS Flat size 65mm x 8mm
TATA
100 kgSAIL
JINDAL
232 MS Flat size 35mm x 8mm
TATA
300 kgSAIL
JINDAL
233 MS Flat size 75mm x 8 mm
TATA
100 kgSAIL
JINDAL
234 MS Flat size 30mm x 3 mm
TATA
100 kgSAIL
JINDAL
235 MS Plate 50 mm thick TATA
200 kgSAIL
Page 20
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks235 MS Plate 50 mm thick
JINDAL
200 kg
236 MS Plate 32 mm thick TATA
200 kgSAIL
JINDAL
237 Chequred plate 7mmTATA
2000 kgSAIL
JINDAL
F. M.S. Pipes & Bends( IS-1239 'C' Class Heavy Duty )
238 M.S. Pipe C Class 20mmTATA
24 mtrsJINDAL
239 M.S. Pipe C Class 25mmTATA
30 mtrsJINDAL
240 M.S. Pipe C Class 40mmTATA
20 mtrsJINDAL
241 M.S. Pipe C Class 65mmTATA
30 mtrsJINDAL
242 M.S. Pipe C Class 80mmTATA
30 mtrsJINDAL
243 M.S. Pipe C Class 100mmTATA
30 mtrsJINDAL
244 M.S. Pipe C Class 125mmTATA
30 mtrsJINDAL
245 M.S. Pipe C Class 300mmTATA
42 mtrsJINDAL
246 M.S. Pipe C Class 200mmTATA
18 mtrsJINDAL
247 M.S. Pipe C Class 250mmTATA
6 mtrsJINDAL
248 M.S. Pipe C Class 150mmTATA
36 mtrsJINDAL
249 SS pipe size 50mmTATA
24 mtrsJINDAL
250 SS pipe size 150mmTATA
18 mtrsJINDAL
251 SS pipe size 100mmTATA
24 mtrsJINDAL
252 seamless pipe 4"TATA
60 mtrsJINDAL
253 seamless pipe 3"TATA
30 mtrsJINDAL
Page 21
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
254 seamless pipe 2.5"TATA
30 mtrsJINDAL
255 seamless pipe 2"TATA
12 mtrsJINDAL
256 seamless pipe 1.5"TATA
12 mtrsJINDAL
257 ANY ISI 10 Nos
258 M.S. Short Bend C Class 2" ANY ISI 10 Nos
259 M.S. Short Bend C Class 3" ANY ISI 10 Nos260 M.S. Short Bend C Class 4" ANY ISI 10 Nos
261 M.S. Short Bend C Class 5" ANY ISI 10 Nos
262 M.S. Short Bend C Class 6" ANY ISI 5 Nos
263 M.S. Bend 250mm C class ANY ISI 6 nos
264 M.S. Bend 300mm C class ANY ISI 12 nos
265 Long bend 6'', ANY ISI 2 nos
266 M.S. Flange 2" ANY ISI 20 Nos267 M.S. Flange 3" ANY ISI 20 Nos
268 M.S. Flange 2½" ANY ISI 20 Nos
269 M.S. Flange 4" ANY ISI 20 Nos
270 M.S. Flange 5" ANY ISI 10 Nos
271 M.S. Flange 6" ANY ISI 10 Nos
272 M.S. Flange 8" ANY ISI 10 Nos
273 SS Flange size 50mm ANY ISI 20 Nos274 SS Flange size 150mm ANY ISI 10 Nos
275 M.S.Round bar 50mm ANY ISI 50 kgs
276 M.S.Round bar 12mm ANY ISI 50 kgs
277 M.S.Round bar 65mm ANY ISI 50 kgs
278 M.S.Round bar 32mm ANY ISI 50 kgs
279 MS Square bar 12mmx12mm ANY ISI 100 kgs
280 EN8 Square bar 50mm ANY ISI 50 kgs281 EN8 Square bar 20mm ANY ISI 50 kgs
282 EN8 Square bar 16mm ANY ISI 50 kgs
283 EN8 Square bar 12mm ANY ISI 50 kgs
284 EN8 Square bar 25mm ANY ISI 100 kgs
285 6" size seem less pipe schedule 80 Non IBR wall thickness 12 mm TATA 18 mtrs
286 ISI 4 Nos.
287 ISI 4 Nos
M.S. Short Bend C Class 1½"
C.I. Cross 6" Heavy duty flange to flange distance 500 mm, No of hole 8, PCD 240mm, wall THK 12mm Flange end.
C.I. Tee 6" Heavy duty flange to flange distance 500mm No of hole 8, PCD 240mm, Wall THK 12 mm Flange end.
Page 22
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
C.I.Pipe Size-6'' Flange end Flange PCD-240mm,no. of hole- 8
288C.I.Pipe Size-6'',Flange to flnage length-2000mm
3 Nos
289C.I.Pipe Size-6'',Flange to flnage length-610mm
3 Nos
290C.I.Pipe Size-6'',Flange to flnage length-200mm
2 Nos
291C.I.Pipe Size-6'',Flange to flnage length-305mm
3 Nos
292C.I.Pipe Size-6'',Flange to flnage length-840mm
3 Nos
288 ISI 4 Nos
289 FRP Sparger For 6'' pipe ISI 2 Nos
290 ISI 72 Nos
291 ISI 1 No
292 NHEC 1 No
G. Rubber Items
293 Rubber cord, size - 19 x 14 mm,( as per sample) Neoprene 50 mtrs
294 do 10 Nos.
295 Clarifier scrapper rubber sheet size - 710 x 150 x 20 mm do 25 Nos
296 Clarifierscrapper rubber sheet size - 900x150x20 mm do 20 nos
297 do 10 nos
298 Hose pipe clamp ID-2",OD-3" do 20 nos
299 Rubber sheet for telescopic valve (as per sample) do 10 nos
300 Clarifier mainhole rubber cord (As per sample) do 10 Mtrs
FRP Cross 6" dia with flange flange to flange distance 500mm No of hole 8PCD240mm
G.M. Bush for hammer Size -60mm ODX50.3mm IDx49mm long As per enclosed drg. No. A3-M-39309
S.S. Screen of DSM Screen( Size-2100 mm Widthx1600mm Length,Gap-0.7mm,Slope-45 )
S.S. Basket With supporting Liner for NK1100 NHEC Make countinious centrifugal Machine
All rubber items should be Neoprene rubber with temperture resist up to 250º C.
Double beat valve rubber sheet OD- 176mm, ID-105 mm, Thickness - 10 mm (As per sample)
Hose Pipe 1/4" Heavy duty wire Coated SAE -100R6 W.P.-28bar lenth 1000mm for continuous centrifugal machine
Page 23
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
301 do 1 no
302 do 1 no
303 do 1 no
304 do 5 nos
305 do 5 nos
306 condensate receiver sight glass strip small as per sample do 20 nos
307 Pan & Evap. Light & sight glass Size Ø 200x20mm strip, as per sample do 30 nos
308 do 10 nos
309 do 10 nos
310 Clarifier Rubber mud seal (as per sample) do 20 mtrs
311 Rubber mud scrapper for Vacuum filter, Size 10 M x 150 mm X 20 mm do 1 length
312 do 10 nos
313 do 13 nos
314 Rubber sheet for diaphragm valve 150mm do 15 Nos
315 Railway Pattern Hose Pipe Dia-2''x 18'' length do 8 Nos
Rubber Oil Seal
316 Size 50x80x10 mmFENNER
10 Nos.DUNLOP
317 Size 3275 - 3000 - 0375 TCK 2250 SCFENNER
10 Nos.DUNLOP
318 Size 0781 - 1250 - 0250 TCK 32T2 SCFENNER
10 Nos.DUNLOP
319 Size 0937 - 1375 - 0250 TCK 3273 SCFENNER
10 Nos.DUNLOP
320 Size 3540 - 2500 - 0500 370 SCFENNER
10 Nos.DUNLOP
321 Size 762-9502-952-3284FENNER
10 Nos.DUNLOP
Rubber sheet for exhaust steam right angle valve IBR, OD-700mm, ID-500mm,Thickness- (50 x 25 + 50 x 10)mm as per sample
1st body vapour valve rubber strip, OD - 690 mm, ID - 640 mm THK - (3 x 8 + 15 x 25 + 7 x 5 )mm, As per sample
Pan exhaust valve rubber strip OD - 560 mm, ID - 450 mm, THK - (50 x 25 + 50 x 10)mm, As per sample
Rubber sheet for Pan right angle valve Size OD - 450mm, ID - 250mm ,Thichness - 25mm outer 50 mm width step tichness 12.5mm( as per sample)
Rubber sheet for Quad right angle valve OD - 530mm, ID - 490mm , Thickness - 25mm Three steps ( as per sample )
Sulpher burner sight glass rubber Size Ø 120x12mm for max. Temp resist up to 500°C
Fluid Coupling rubber star ID- 78mm, OD-95 mm & width - 34.5 mm(as per sample)
pan vapour valve rubber strip OD 440mm, ID 400mm thickness (3x8 +10x16 + 7x5) mm (as per sample)
Juice heater vapour valve rubber strip OD 335mm, ID 295mm, thickness (3x8 + 10x16 + 7x5) (as per sample)
Page 24
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
322 Size 88.9-114.8-1217-3299FENNER
10 Nos.DUNLOP
323 size 35x54x10mmFENNER
2 nos.DUNLOP
324 size 35x52x10mmFENNER
10 nos.DUNLOP
325 size 34.93x 47.62x 7.93 mmFENNER
20 nos.DUNLOP
326 size - SC 097x1875x0260mmFENNER
20 nos.DUNLOP
327 Rubber Stator For Screw Pump Size 6" Model PSL-216-20AABN RISANSI 5 Nos.
328 Rubber Stator For Screw Pump Size 4" Model PSL-212-14AABN RISANSI 5 Nos.
329 Rubber star 95x 80x30 mm Any ISI 10 Nos.
330 Rubber seat for double beat valve size 160x20x15mm Any ISI 10 Nos.
331 Rubber Bush OD 20 mmx ID 9 mm x Length 18 mm Any ISI 100 Nos.
332 Rubber Bush Outer Dia 25 mmx Middle dia 30mm x ID 12 mm x Length 35 mm Any ISI 10 nos.
333 Rubber Bush OD 25mm x ID 12mm x THK 16mm Any ISI 50 nos
334 Rubber star for star coupling fro IRC (as per sample) Any ISI 12 nos
335 Rubber star L 95 Any ISI 10 nos
336 Rubber star L 70 Any ISI 4 nos.
337 Rubber star L 110 Any ISI 10 nos.
338 Rubber Plug for Tube Size - ID 42mm, OD 45mm Any ISI 50 Nos
339 Rubber Plug for tube size ID=86.4, OD=90,Thickness=1.6 mm Any ISI 50 Nos
340 Any ISI 1 No
341 Rubber Oil Seal 50-70-10FENNER
20 Nos.DUNLOP
342 Rubber Oil Seal 40-55-7FENNER
10 Nos.DUNLOP
343 Rubber Oil Seal 45-70-10FENNER
2 Nos.DUNLOP
344 Rubber Oil Seal 55-80-10FENNER
10 Nos.DUNLOP
345 Rubber Oil Seal 45-80--10FENNER
2 Nos.DUNLOP
346 Rubber Oil Seal 50-80-8FENNER
2 Nos.DUNLOP
Rubber Hose pipe wire coated heavy duty 3/4 inch Ø size x 100 meter Length suitable for 100°c and pressure 7 kg/cm²
Page 25
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
347 Rubber Oil Seal 30-40-7FENNER
1 NoDUNLOP
348 Rubber Oil Seal 58-80-10FENNER
6 Nos.DUNLOP
349 Rubber Oil Seal 40-52-7
FENNER
1 No.DUNLOP
350 Rubber Oil Seal 55-80-10FENNER
6 Nos.DUNLOP
351 Rubber Oil Seal 55-70-8FENNER
10 Nos.DUNLOP
352 Rubber Oil Seal 70-90-10FENNER
2 Nos.DUNLOP
353 Rubber Oil Seal 45-70-08FENNER
2 Nos.DUNLOP
354 Rubber Oil Seal 100-120-12FENNER
1 No.DUNLOP
355 Rubber Oil Seal 60-75-10FENNER
5 Nos.DUNLOP
356 Rubber Oil Seal 250-354-50FENNER
20 Nos.DUNLOP
357 Rubber Oil Seal 225-300-37FENNER
12 Nos.DUNLOP
358 Rubber Oil Seal 25-35-7FENNER
5 Nos.DUNLOP
359 Rubber Oil Seal 40-55-08FENNER
5 Nos.DUNLOP
360 Rubber Oil Seal 50-65-10FENNER
5 Nos.DUNLOP
361 Rubber Oil Seal 2250-3000-0375 TCK 3275FENNER
15 Nos.DUNLOP
362 Rubber Oil Seal 88.9 x 114.3 x 12.7 (3295)FENNER
15 nosDUNLOP
363 Rubber Oil Seal 76.2 x 95.25 x 9.52 (3284)FENNER
15 nosDUNLOP
Page 26
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
364 V Belt Size B - 70FENNER
10 nosDUNLOP
365 V Belt Size C - 128FENNER
5 Nos.DUNLOP
366 V Belt Size C - 150FENNER
5 Nos.DUNLOP
367 V Belt Size B- 56FENNER
2 Nos.DUNLOP
368 V Belt Size B- 67FENNER
2 Nos.DUNLOP
369 V Belt Size B- 36FENNER
1 No.DUNLOP
370 V Belt Size B- 62FENNER
10 Nos.DUNLOP
371 V Belt Size A 78FENNER
1 No.DUNLOP
372 V Belt Size A 45FENNER
4 Nos.DUNLOP
373 V Belt Size B 82FENNER
1 No.DUNLOP
374 V Belt Size B 90FENNER
3 Nos.DUNLOP
375 V Seal Size 140x120x8 ( As per sample )FENNER
15 Nos.DUNLOP
376 V Belt Size B 40FENNER
1 No.DUNLOP
I Rubber Tyre For Coupling
377 Size PH 140 FENNER
10 Nos.HITECH
378 Size PH 278FENNER
1 No.HITECH
379 size PH 220FENNER
15 nos.HITECH
380 size PH 106FENNER
3 nos.HITECH
381 Size HPT 190FENNER
2 Nos.HITECH
382 Size EF 60 (without hole)FENNER
2 Nos.
Page 27
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
382 Size EF 60 (without hole)HITECH
2 Nos.
383 Size HPT 160FENNER
1 No.HITECH
384 Size HPT 126FENNER
15 Nos.HITECH
385 Size HPT 272FENNER
1 No.HITECH
386 Size HPT 178FENNER
2 Nos.HITECH
387 Size TC/Q 013 (without hole)FENNER
1 No.HITECH
C I Complete coupling for 388 Size PH 140 Any ISI 2 Nos
389 Size PH 278 Any ISI 1 No390 size PH 220 Any ISI 2 Nos
391 size PH 106 Any ISI 2 Nos
392 Size HPT 190 Any ISI 2 Nos
393 Size EF 60 (without hole) Any ISI 2 Nos
394 Size HPT 160 Any ISI 2 Nos
395 Size HPT 126 Any ISI 2 Nos
396 Size HPT 272 Any ISI 2 Nos397 Size PH 86 Any ISI 2 Nos
398 Size HPT 178 Any ISI 2 Nos
399 Size TC/Q 013 (without hole) Any ISI 2 Nos
400 CI Coupling Pin bush type 6'' Any ISI 5 Nos
401 CI Coupling Pin bush type 8'' Any ISI 5 Nos
402 CI Coupling Pin bush type 10'' Any ISI 5 Nosj. Tools & Tackles
403 Center Punch Taparia 2 Nos.
404 Pipe wrinch 12" & 18" Taparia Nos.
405 Spanner 7/8" (De ) Taparia 2 Nos.
406 Spanner 7/8" (Ring ) Taparia 2 Nos.
407 Spanner 36x41(De) Taparia 2 Nos.
408 Spanner 36x41 (Ring) Taparia 2 Nos.
409 Tin Cutter 18" Taparia 1 No.
410 Sissor 8" Taparia 2 Nos.411 De - Spanner complete set Taparia 2 sets
412 Ring - Spanner complete set Taparia 2 sets
413 Adjustable wrench 16" Taparia 2 Nos.
2 nos (each)
Page 28
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
414 Adjustable wrench 12" Taparia 2 Nos.
415 Box spanner set with rachel Taparia 1 set
416 Grease gun prima make 2 Nos.
417 wire brush 4" for job cleaning (Foundary Brush ) good quality 10 Nos.418 Filler gauge 6" long Taparia 1 No
419 Bench grinder grinding wheel 12"(Rough & Smooth) Any ISI 2 each Nos
420 Gas cutting torch Esab 2 Nos
421 Grinding wheel smooth OD- 12", ID- 1", THK - 1" Any ISI 1 no
422 Bosch 1 set
423 Any ISI 2 nos
424 Idler sprocket for RBC no of teeth -14, pitch 150mm, ( IS2708 G3 ) Any ISI 4 nos
425 EN 9 Shaft 80mm dia, 1600mm length Any ISI 4 nos
426 EN 9 Shaft 170mm dia, 3225mm length Any ISI 1 no
427 Shaft EN8 for sprocket size 100mm Dia, length 2000mm (IRC) Any ISI 2 nos
428 ISI 1 set
429 ISI 1 set
430 ISI 4 nos
431 IS starndard 24 nos
432 ISI 8 set
433 Rubber o Ring(240x7)(as per sample for hydrulic cap) ISI 8 Set
23 mm Heavy Duty High Torque Drill, 280/640 rpm,Model-GBM 23-2, Part no-0 601 121 103
Crown Pinion Matterial CS - 2708 Gr - III, O.D. - 730mm, bore- 320H7 ,Width 300mm all over machined As per drawing no. A2M37135
Mill roller shaft for 24" x 48", FS 40C8 IS1570 Normalized length of shaft 3048mm, OD of shaft at shell portion 350mm, net wt. of shaft 1968 kg complete with shrunk fitted CI coarse grain shell 660 OD x 1220mm length (as per drawing no. A2-M-
36977) with grooving detail Pitch-40mm,Angle- 45degree ,depth- 40mm
Mill roller shaft for 24" x 48", FS 40C8 IS1570 Normalized length of shaft 3048mm, OD of shaft at shell portion 350mm, net wt. of shaft 1968 kg complete with shrunk fitted CI coarse grain shell 660 OD x 1220mm length (as per drawing no. A2-M-
36977) with grooving detail Pitch-25mm, Angle 45degree, depth- 23mm
GM bush for mill bottom bearing (Feed and discharge housing) material GM IS=318 grade II, weight 31 kg (as per drawing no A2-M-36958)
Knife for Leveler Blank size - 505 x 170 x 20 THK, Material IS:2062(St 42-S), Net wt. 10.17 Kgs, Drawing No. A3-M-37136
Canvas reinforced chevron type rubber bucket for mill hydraulic cap size- ID 210mm, OD 240mm,Thk.-60 mm complete set in five pieces assembly
as per sample.
Page 29
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
434 PVC Fan OD-22 Inch No of blade -7 bore size 1 inch for shaft(For blower) ISI 3 Nos
CI pully for continuous machine NK 1100 C section (for rubber V belt C 150) No. of groove= 8, pully, dia 10" ( As per sample and weigt wise with machining)
High flow pump model -psl 216 20AANN head -30 metre cap -25 m3/hr pump rpm 480 size 6:"
High flow pump model -psl 21214AABN head -30 metre cap -10 m3/hr pump rpm 480 size 4"
2 tubes (each)
Page 35
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
589 Emery tape 80No
norton
5 roll Nos.
590 Emery tape 100No Century 5 roll Nos.
norton
591 Emery tape 120No Century 5roll nos
norton
592 Oil paper ISI 100 nos
593 Namda (Felt) 10 mm 1mtrx1mtr ISI 1 sheet No.
594 Namda(Felt) 12 mm 1mtrx1mtr ISI 1 sheet No.
595 Red lead ISI 5 Nos.
596 White lead ISI 5 kg597 Grinding Paste rough Any ISI 250 gm kg598 Grinding Paste medium IOL make 250 gm kg
599 Grinding Paste Smooth IOL make 250 gm kg
600 Brass Farrul size 6 mm, 8 mm, 10 mm Any ISI kg
601 Copper cable for welding 95 mm2 Esseb 100 mtr
602 Oxygen regulator Any ISI 2 nos
603 Commercial LPG regulator Any ISI 2 Nos.
604 Gas cutting nozzles 1/32" ,1/16" ,1/8" Any ISI 4 each Nos.
605 Split pin (6.3x35mm Full length 55 mm) heavy duty Any ISI 7000 Nos.
606 Split pin (4x25mm) Any ISI 400 nos607 split pin (3x30mm) Any ISI 50 nos
608 Esseb Mtrs
609 Grinder wheel, for AG 4 Grinder Bosch 10 No
610 Grinder wheel, for AG 7 Grinder Bosch 10 no
611 Break Liner (8 X 102)mm ISI 3 no
612 Break Liner (8 X 72)mm Any ISI 2 mtr
613 Alumunium Rivit 8 x 25 mm ISI 50 Nos
614 Alumunium Rivit 8 x 30 mm ISI 150 Nos
615 Lock Tight 406 ISI 5 tube kg
616 U Clamp with nut size 3/4" ISI 10 nos nos
617 U-clamp for wire rope 12mm, 16mm, 20mm, 25mm ISI nos
Rubber hose for gas cutting, 8mm, IS 447188, working presser 255 psi. Red & Blue
100 mtr (each)
12 nos each
Page 36
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
L. Casting Materials621 ( G.M. Hollow Bush)
622 Size 4" ODx1" ID x 12" Length ISI 2 no
623 Size 3" ODx1" ID x 12" Length ISI 2 no624 Size 6" ODx2.5" ID x 10" Length ISI 1 no
G.M. Solid rod625 Size 3" ODx10" Length ISI 1 no
626 Size 2" ODx10" Length ISI 1 no
627 Size 1" ODx10" Length ISI 1 no628 Rectangular rod 60mm x 50mm x 300mm ISI 2 nos629 GM Round bar OD 190mm, ID 130mm, length 12 inch ISI 1 no630 GM Round bar OD 80 mm length 12 inch ISI 2 no
631 ISI 2 kg each
632 Brass sheet 1mm thick, 1mtr x 1mtr ISI 1 no
633 Brass Rod Size 40mmØx600mm ISI 1 no
634 Brass Rod Size 25mmØx600mm ISI 1 no
635 Brass Rod Size 100mmx600mm ISI 1 no
636 Copper tube1/4inch ISI 3 mtr
637 En 8 round bar 40 mm ISI 1 no
638 En 8 round bar 50 mm ISI 1 no
639 En 8 round bar80mm ISI 1 no
640 ISI 20 no
641 Square bar EN 8 for making key 5/8" 1/2" 1" ISI 1
642 Square bar EN 8 for making key 15mm ISI 1 mtr
643 Square bar EN 8 for making key 20mm ISI 1 mtr
644 MS round bar 40mm ISI 2 mtr
645 MS round bar 30mm ISI 2 mtr
646 Sprocket for cane carrier, no of teeth 14, pitch 150mm, OD -715mm ISI 1 nos
En 8 bolt with nut Total length 750mm, Conical head, Dia 46mm to 25mm, Height from top to bottom of conical shape is 30mm. After that Dia 1'' Length 680mm with
Transparent type Drum Level Gauge for Boiler with complete fitting. Hydraulic test pressure 154 kg/cm2, IBR, Isolation Valve - Auto ball check Needle valve Drain Valve – Needle valve, 25Nb flanged end.
Page 38
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
663 Forbes Marshall 1 no
664 MINIMAX 1 no
Spiral Joint Suitable for 70 kg/Cm
ISI(TESTED)
665 25 18 4 do 4 Nos
666 129 109 4do
4 Nos
667 35 25 4do
20 nos
66835 23 4
do12 nos
669 78 65 5 do 4 Nos
670 48 40 4 do 2 Nos
671 38 25 4 do 15 Nos
672 38 28 4 do 10 Nos
673 40 17 4 do 20 Nos
674 130 85 5 do 2 Nos
675 87 37 5 do 2 Nos
676 110 85 5 do 2 Nos
677 90 50 5 with collar F.G.ASME (IR & OR) do 6 Nos
678 310 285 4 do 2 Nos
679 290 250 4 do 2 Nos
680 268 222 4 do 2 Nos
681 260 240 5 do 6 Nos
682 235 200 4 do 2 Nos
CBD Valve,Type-Right angle needle, End connection size-25Nb, End connection type-flanged, working pressure-77Bar, Hydraulic test pressure-154kg/cm², Working temp-sturation, IBR certified .
LP Dosing pump for boiler cap - 0 to20 LPH Pressure - 0 to3 kg/cm2 Plunger type
OD (mm) ID (mm) Thickness(mm)
Page 39
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
683 235 192 4 do 2 Nos
684 202 176 4 do 2 Nos
685 140 120 5 do 6 Nos
686 40 30 4 do 30 Nos
687 70 50 4 do 20 Nos
688 50 40 4 do 20 Nos
689 120 80 5 do 10 Nos
690 158 102 5 do 5 Nos
691 190 145 5 do 3 Nos
692 92 50 5 do 2 Nos
693 84 47 5 do 2 Nos
694 102 50 3 do 5 Nos
695 48 45 5 do 20 Nos
696 48 38 5 do 2 Nos
697 160x120x5 do 10 nos
698 (520x410x420x305x5) mm - Spiral joint for main hole do 4 Nos
699 150x125x4 do 5 Nos
700 62x25x5 do 5 Nos
701 158x90x5 do 6 nos
702 110x81x4 do 5 Nos
703 350X195X5 do 5 nos
704 34X22X4 do 2 nos
705 38X17X5 do 20 nos
706 75x54x4 do 5 nos
Dry Asbestos Rope(cotton)
707 3.0 mm Champion 5 kg
708 6.0 mm do 5 kg
709 10.0 mm do 10 kg
710 12.0 mm do 10 kg
Non Metalic Joint Sheet Style 20
711 3 mm Champion 500 kg
712 2mm Champion 50 kg
713 1mm style 54 Champin 50 kg
Non Metalic Graphited gland packing
Page 40
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
714 6.0 mm Champion 5 kg
715 8.0 mm do 5 kg
716 10.0 mm do 20 kg
717 12.0 mm do 20 kg
Metalic Gland packing Champion Style 1916
718 6.0 mm Champion 2 kg
719 8.0 mm do 5 kg
720 10.0 mm do 5 kg
721 12.0 mm do 5 kg
722 Metalic joint sheet, 3mm, style 54 (ss wired inside for boiler and turbine) Champion 100 kg
723 3.0 mm Champion 2 kg
724 5.0 mm do 2 kg
725 6.0 mm do 2 kg
726 8.0 mm do 2 kg
727 10.0 mm do 2 kg
728 12.0 mm do 2 kg
729 Rubber joint 3 mm and 6 mm suitable for 150 'C Any ISI 25 kg
730 Half Thread bolt with nut size 16x75 mm Any ISI 150 Nos731 Half Thread bolt with nut size 16x140 mm Any ISI 25 kg
732 HT Nut & Bolt with washer 16×90mm (Half thread) Any ISI 150 nos
733 HT Nut & Bolt with washer 10×40mm Any ISI 100 nos
734 Square head bolt with nut size 24x250 mm Any ISI 6 nos
735 Bolt with nut size 20x100 mm Any ISI 10 nos
736 Bolt with nut size 1/2"x3" Any ISI 25 nos
737 Bolt with nut size 5/8"x4" Any ISI 10 nos
738 Stud with nut size 5/8"x2.5" Any ISI 10 nos
739 Stud with nut size 1/2"x3" Any ISI 10 nos
740 Stud with nut size 16x100 mm Any ISI 10 nos
741 Stud with nut size 18x135 mm (18.9) Any ISI 25 nos
742 Stud with nut size 24x130 mm (18.9) Any ISI 26 nos
743 Stud with nut size 12x100 mm (8.9) Any ISI 25 nos
744 Stud with nut size 22x155 mm (18.9) Any ISI 27 nos
745 Coupling nut bolt dia 19 mm thread size 16 mm length 91 mm Any ISI 50 nos
746 Coupling bolt 12x75 Any ISI 10 nos
747 Coupling nut bolt dia 10 mm thread size 28 mm length 80 mm Any ISI 25 nos
748 Coupling nut bolt dia 19 mm thread size 16 mm length 98 mm Any ISI 30 nos
High Pressure Metalic Graphite packing suitable for 55kg/Cm2, working pressure and 82.5 kg/Cm, Hy. test pr.Working temperature 500 'C
Page 41
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
749 HT bolt & nut 6 x 25 mm Any ISI 50 nos
750 HT bolt & nut 8 x 25 mm Any ISI 50 nos
751 HT bolt & nut 16 x 40 mm Any ISI 200 nos
752 HT bolt & nut 8 x 40 mm Any ISI 50 nos
753 HT bolt & nut 12 x 40 mm Any ISI 50 nos
754 HT bolt & nut 16 x 75 mm (half thread) Any ISI 150 nos
755 HT bolt & nut 18 x 50 mm Any ISI 20 nos
756 HT bolt & nut 16 x 90 mm Any ISI 150 nos
757 HT bolt & nut 16 x 50 mm Any ISI 50 nos
758 HT bolt & nut 6 x 30 mm Any ISI 50 nos
759 HT bolt & nut 8 x 30 mm Any ISI 50 nos
760 HT bolt and nut 12x60 mm Any ISI 50 nos
761 HT bolt and nut 12x50 mm Any ISI 250 nos762 HT bolt and nut 16x140 mm Any ISI 25 nos
763 HT bolt and nut 10X50 mm Any ISI 50 nos
764 HT bolt and nut 18x140 mm Any ISI 5 nos
765 HT bolt and nut 8x30 mm Any ISI 20 nos
766 HT bolt and nut 20x150mm Any ISI 50 nos
767 HT bolt and nut 10x25mm Any ISI 10 nos
768 HT bolt and nut 10x75mm Any ISI 50 nos
769 HT bolt and nut 10x35mm Any ISI 300 nos
770 HT bolt and nut 16x120mm Any ISI 10 nos
771 HT bolt and nut 24x150mm Any ISI 10 nos
772 HT bolt and nut 22x150mm Any ISI 15 nos
773 HT bolt and nut 10x20mm Any ISI 300 Nos
778HT bolt and nut 20x90 mm half thread 10.9 Any ISI
100 nosGKW
779 Any ISI50 nos
780 Wooden Strip Size 75mmx880mmxthick 15mm Teak wood 100 nos
Inter Rack Carrier Chain Spares: (Drawing no. A2-M-35862)868 Side Plate for pin Round holes 200 nos869 Side Plate for pin Slotted holes 200 nos870 Side Plate for bush holes (Slotted) 200 nos871 Pin 200 nos872 Bush 200 nos873 Roller 200 nos874 Attachment Link 200 nos875 Inter Rack Carrier Chain (complet) (Drawing no. A2-M-35862) 200 meter
876 Side Plate for pin Round holes 200 nos877 Side Plate for pin Slotted holes 200 nos878 Side Plate for bush holes (Slotted) 200 nos879 Pin 200 nos880 Bush 500 nos
PVC Pipe blind cap, size - 6" (as per sample) for spray engineering cooling system.
10mtr each
Massecuit sampling key /cock for checking of massecuit er sample ( as per sample )
883 Side Plate for pin Round holes 200 nos884 Side Plate for pin Slotted holes 200 nos885 Side Plate for bush holes (Slotted) 200 nos886 Pin 200 nos887 Bush 200 nos888 Roller 200 nos
889 200 nos
890 200 mtrs
891 2 nos
892 2 set893 Fire wood for boiler dia-6-12 inch dia and iengh 3ft to 6ft stright 100 ton
894 HSS Power hexa blade size450mmx32mmx1.6mm( blade no 6 ) mirinda 2 nos
Oil Lubricator model-LUBE D (MICRO PRECISSION) spares
895 Plunger micro precsion 50 Nos
896 Banjo micro precsion 10 Nos
897 Banjo bolt micro precsion 100 Nos
898 Ferrule 3/8inch micro precsion 100 Nos
899 Rising drop type flow indicator micro precsion 4 Nos
903 Piston adusting screw (priming rod) micro precsion 10 Nos
904 Piston adusting Nut micro precsion 25 Nos
905 Glass tube accylic micro precsion 10 Nos
906 Glass tube micro precsion 100 Nos
M S Slat for Cane carrier (DRW no. A2-M-36986) Length 1200mm width -187mm thickness-6mm 8nos hole for bolt size 12mmdia Slat IS: 8236Inter rack carrier chain complete assembled (Drawing no. A2-M-17455)2 nos. of Sprockets with shaft for inter rack carrier no. of teeth 14, pitch 150mm, Shaft Dia 100 x 1880 mm long, Sprocket center to center 1400 mm suitable for 35 mm width chain roller Dia 75mm (Sprockets one side fix and one side free with 4 nos of ribs)2 nos. of Sprockets with Idler Shaft for RBC, no. of teeth 14, pitch 150mm, Shaft Dia 80 x 1600 mm long, Sprocket center to center 1104 mm suitable for 35 mm width chain roller Dia 75mm (Sprockets both side fix without ribs)
Page 47
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
907Guide wire micro precsion 10
Nos
908 Filter micro precsion 5 Nos
909 Delevary pipe micro precsion 100 Nos
910 STF Bottom bolt micro precsion 10 Nos
911 End flange micro precsion 5 Nos
912 Middle flange micro precsion 5 Nos
913SFT top micro precsion 10
Nos
914 SFT bottom micro precsion 10 Nos
915 SFT bottom Bolt micro precsion 100 Nos
916 SFT Top Bolt micro precsion 50 Nos
917 Banjo nut micro precsion 10 Nos
918 I Nut micro precsion 50 Nos919 Barrel micro precsion 50.0 Nos
PAINTS920 Shalimar 140 Ltrs
Asian
Berger
921Heat Resistance Chimney Black,Temp. resistance upto 500º C.
TEFC Squirrel cage three phase AC induction flange mountate motor, KW/HP-3.7/5, RPM-1440, Frame-ND112M, V-415±10%,Hz-50±5%,A-8, Duty-S1, Ins.Cl-F, Eff-85%. With long shaft for manual Operation,
100 DOL starter for 5 HP motor,Type- MK1,RELAY(9-14A) L&T 2 nos
101LED type indicating lamp, 24V, DC, ESBE (Amber & red color)
TeknicNos
HARDWARER ITEMS
102Cadmium plated full threaded Nuts and Bolts with Flat washer and spring washer
103 Size-2mm×4mm ISI 100 Nos
104 Size-2mm×6mm ISI 100 Nos
105 Size-2mm×8mm ISI 100 Nos
106 Size-3mm×6mm ISI 100 Nos
107 Size-3mm×8mm ISI 100 Nos
108 Size-3mm×12mm ISI 100 Nos
109 Size-3mm×25mm ISI 100 Nos
110 Size-4mm×12mm ISI 100 Nos
111 Size-4mm×25mm ISI 100 Nos
112 Size-4mm×40mm ISI 100 Nos
113 Size-4mm×60mm ISI 100 Nos
114 Size-5mm×20mm ISI 100 Nos
115 Size-5mm×30mm ISI 100 Nos
116 Size-5mm×60mm ISI 100 Nos
TEFC Squirrel cage three phase AC induction flange mountate motor, KW/HP-2.2/3, RPM-1425, Frame-ND100L, V-415±10%,Hz-50±5%, A-4.6, Duty-S1, Ins.Cl-F, Eff-85%. With long shaft for manual Operation,
TEFC Squirrel cage three phase AC induction motor, KW/HP-18.5/25, RPM-975, Frame-200L, V-415±10%,Hz-50±5%, A-36, Duty-S4, Ins.Cl-F, Eff-2
262 Cu flexible pvc wire single core multistraind 1.5sqmm, 660V do 180 Mtrs
263 Cu flexible pvc wire single core multistraind 2.5sqmm, 660V do 180 Mtrs
Fork hook terminal end, for solder less crimping, Cu/Al, 0.75mm²
Fork hook terminal end, for solder less crimping, Cu/Al, 1.5mm²
Fork hook terminal end, for solder less crimping, Cu/Al, 2.5mm²
Fork hook terminal end, for solder less crimping, Cu/Al, 4.00mm²Fork hook terminal end, for solder less crimping, Cu/Al, 6.00mm²
Page 60
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
264 Cu single core multistraind cable 16sqmm, 660V do 10 Mtrs
265 Cu single core multistraind cable 25sqmm, 660V do 10 Mtrs
266 Cu single core multistraind cable 70sqmm, 660V do 10 Mtrs
267 55 KW,SIEMENS MAKE ISI 2 NOS
TURBINE-ALTERNATER SPARE268 Forward diode,BHD N31B 16 7J for alternater BHEL 1 No
269 Reverse diode,BHD N30B 16 8H for alternater BHEL 1 No
Carbon brushes for(length x Breadth x Thickness)270 Mill DC drive motor(225KW) size- 50 x32x16mm,two wire Grade-EG224 OEM 24 Nos
271 Batch DC drive motor(135KW) size- 38 x25x12 mm,two wire Grade-EG224 ISI 24 Nos
272 Fibrizer slip ring motor(450KW) size-45×40×20mm, BE22 Z1 ISI 12 Nos
273 Injection slipring motor(75KW) size-40×20×18mm, BE22 Z2 ISI 12 nos
Carbon brushe Holders(Brass/copper) for
274For Mill DC drive motor(225KW)( Carbon Brush size- 32x16mm),Motor Make-IE
ISI24 nos
275 ISI12 Nos
276 ISI2 Nos
Slip Ring277 For Motor(Make-CG) 450KW, 737rpm, frame- KMR4505,Duty-S1 ISI 1 No278 For Motor(Make-CG) 75KW, 1460rpm, frame- CW250S,Duty-S1 ISI 1 No
ACB AND ITS SPARES279 Under Voltage Release Coil(Instantaneous),50Hz,208-240V,3WT9853-1JK00 SIEMENS 2 Nos
280Under Voltage Release Coil(Instantaneous),50Hz,380-415V,3WT9853-1JM00
SIEMENS 4Nos
281 SIEMENS
3
Nos282 External Current Transformer for 3WT ACB,800A,type-3WT98 43-1CE00 SIEMENS 3 Nos283 External Current Transformer for 3WT ACB,1000A,type-3WT98 43-1CF00 SIEMENS 3 Nos284 External Current Transformer for 3WT ACB,1250A,type-3WT98 43-1CG00 SIEMENS 3 Nos285 External Current Transformer for 3WT ACB,1250A,type-3WT98 43-1CH00 SIEMENS 3 Nos
SPARE FOR DC DRIVE MILL
SPARE FOR CENTRIFUGAL MACHINE
286 Mitsubishi make PLC type F×2N with program Mitsubishi 1 No
287 JAYASHREE/ISI6
No
Batch DC drive motor(135KW) As per sample(Carbon brush size- 25x12 mm),Motor Make-SIMO
For Slipring Induction motor,Type-MP13M663,KW-5.5,RPM-895,DUTY-S4,415V,50 Hz,MAKE-BBL
FRONT COVER WITH ON/OFF SWITCH FOR ACB, 800/1000/1250/1600 AMPS,3WT8, Ue-500V,50/60Hz,Icu-66KA, Ics-66KA,Icw/1S-50KA, Uimp-8KV
Inductive Proximity Switch,IPS D3 OD NO,10-30V DC ,NO PNP 200mA,DIA-APPROX-27MM
Page 61
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
SPARE CC VFD Panel
SPARE for Turbine and Auxiliary (Authorised dealer)
289IBR Forged Steel Glove Valve,20 NB Socket weld,size-3/4'',class-800 2 Nos
290IBR Forged Steel Glove Valve,Socket weld,size-1'',class-800 2 Nos
2914 Nos
292 Taparia
1 Nos
Spare of Belliss Make HES 14 TYPE,3MW,T.A, Set No-BM/4808/B
1 Steam End & Exhaust End bearing 1
2 Main & Reverse Thrust Pad Assembly Complete do 1 Set
3 Oil Seal do 1 Set
4 Thrust & Journal Bearing for Vertical Drive for Governor & Oil pump do 1 Set
5 Thrust & Journal Bearing for Lay Shaft assembly do 1 Set
6 Bush for Pilot Valve spindle do 1 Set
7 Guide Bush for Control Valve spindle do 1 No
8 ‘O’ ring for CSEV assembly do 2 No
9 do 1 Nos
10 Set of Oil Baffle for Steam End & Exhaust End Bearing do 1 No
11 Baffle segment for Diaphragm do 1 Set
12 Baffle segment for Steam & Exhaust End gland do 1 Set
13 Leaf spring for baffle segment do 20 Set
14 Over speed trip ring assembly complete do 1 Nos
15 Pilot Valve with inner sleeve do 1 Set
16 Coupling assembly complete for main oil pump do 1 Set
17 H.S. Coupling Element do 1 Set
18 H.S. Coupling Fastener do 1 Set
19 Set of bushes(long bush, short bush, guide bush, split bush do 1 Set
20 Flat Round head screw for locking steam gland labyrinth holder for top casing do 1 Set
Fouress Engg India ltd/Forbes Marshall
Fouress Engg India ltd/Forbes Marshall
Fouress Engg India ltd/Forbes Marshall
Filter Element for DUPLEX BASKET FILTER,Max design Pressure-7kg/cm², Hydraulic Test Pressure-10.5 kg/cm²,Fluid Handler-ISO VG 68,Max Flow Rate-500 Ltrs/Min,Degree of Filtration-50 Micron,Connection- 80 NB
ABB/ Powerforma Make DC mill panel (DCS 800-SO2-820-5) - 4 nos Batch type C/F machine's panel (DCS 800-SO2-520-5) - 2 nos
AVR cum excitation control panel Generator - rating 3000KW, 415V, 50HZ, 3Phase,Excitation voltage - 150V DC, Current - 5A DC, (AVR Panel -2 nos,Excitation control panel-1 no.) Make - SANELEC Excitation system pvt. Ltd.
9 Dynamic Balancing of Fibrizer, ID, FD, SA fan & continuous machine OEM/Autherised Dealer 11 sets
10 Air compressor (Centrifugal station) Make- Kirloskar ltd. (Model: EH-100M) OEM/Autherised Dealer 1 set
11 OEM/Autherised Dealer 3 set
12 OEM/Autherised Dealer 3 set
13 Air Drier, GEM Pvt. ltd. HLN series. OEM/Autherised Dealer 2 set
14 OEM/Autherised Dealer 2 set
15 Centrifuge/ Filtration of Turbine oil (Servo prime 68T) OEM/Autherised Dealer nos
16 1
17 OEM 4 No
18 1 Nos
19
2
No
20 5Nos.
21 Servicing of Air Compressor EH 100m, 7kg/cm2 press. 1 No
NHEC, Pune make, Batch(Model-NG 1250) - 2 nos and continuous (Model-NK1100) type C/F machine - 5 nos
Compressor (Clarification House) Make- Kay International Ltd., Capacity - 300 m3/hr, Pressure - 1 kg/cm2.
Two stage industrial Air compressor (Boiler & PRD) - 3 nos Ingersoll Rand ltd. (Model - 2545)
Stitching machine servicing and spare parts. Make - Stitchwell Machine CompanyModel No. ST-1000/80000 DX, Make- Stitchwell
2500 (Approx)
Repairing of commutator of DC motors(type-Z4-280-31-Y2 V1,Standard-JB/T6316-1992,KW-135,V-400,A-383,RPM-600/1400,IC-06,EXCIT-220V,14A,INS CL-F,DUTY-S1,COMMUTATOR No-609010,MAKE-SIMO
OEM/Autherised Dealer Ltrs.
Direct Current Motor,Frame-ILFC280L,Output-225KW,Speed-1000/1100RPM,Armature-460V,526A,Field-220V,9.6/7.5A,duty-S1,Ins. Cl-F,Winding-Shunt,IP-23,IC-06(M/C No-20080034-01/02/03/04,Make-Integrated Electric,Co Pvt Ltd
Vacuum Filter,size-8Feet x 16 Feet,Simplex Make Complete removal of SS linar hydrolic testing of drum & accessories, High flow Valves , Vaccum aqualizing valves setting.
Servicing of Mill lubricating oil pump 18 points,Model-LUBE-D Make MICRO PRECISION
OEM/Autherised Dealer
Kirloskar Brother Ltd
Page 64
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
22 NHEC 7 Nos.
23 Key international 3 Nos.
24 Servicing of Boiler Air Compressor, 7kg/cm2 press. 2 Nos.
25 Servicing of PRD Station Model No. -2475, 7kg/cm2 press. 1 No
1
Fabrication works
Autherised contracter
2''
3''
4''
5''
6''
8''
10''
12''
2 Dismentalling, Errection & Fitting Rate of Bend & Tee Autherised contracter
2''3''4''5''6''8''
10''12''
3 Patching Work Rate per Square feet
4
2''
3''
4''
5''
6''
8''
10''
12''
5
2''
3''
4''
5''
6''
8''
10''
Servicing of Continuos & Batch type Centrifugal maachines
Servicing of Air Compressor for Sulphur Furnace , 1kg/cm2 press.
Kirloskar Brother Ltd
Ingersoll rand
Dismentalling, Errection & Fitting Rate of pipe rate per inch dia and per feet length.
Autherised contracter
Dismentalling, Errection & Fitting of flange,(Rate per dia) Autherised contracter
Dismentalling & Fitting of Valve Autherised contracter
Page 65
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
5
12''
6
7(a)
(b)
(c)
(d)
(e) Autherised contracter
(f) Autherised contracter
Dismentalling & Fitting of Valve Autherised contracter
Vapour pipe/ Unloader/ RBC strengthening with Channel, angle, chequired plate Rate per Ton / lump sum Autherised contracter
Fabrication and shaft machining work of new ID Fan for 40 Ton Boiler Capacity. Fan Dia - 2295mm, Involute Vane -18No.Shaft Bloom Size- EN 8 ( Size 160mmDiax3500mm long ) Machining of Hub , Bearings & Coupling Sizes with key ways. Hub - Cast steel IS -2708 Gr.- III A, Fabricated Plate thickness- 4 to10mm ( Fabrication & Machining work as per sample)with hard facing and balancing.( Job work as per Instructed by CE and Boiler Engineer) Flue gas inlet fab. new cone with 5mm thickness plate with 8mm thick two Flanges.( Job -fabrication,erection,commisioning,allighnment & trial work as per Instructed by CE and Boiler Engineer)
Airochem / Manufacturer
( Backward Type)
Fabrication and balancing of above old ID fan( without existing shaft and Hub). Flue gas inlet fab. new cone with 5mm thickness plate with 8mm thick two Flanges.( Job -fabrication,erection,commisioning,allighnment & trial work as per Instructed by CE and Boiler Engineer). ( Fabrication & Machining work as per sample)
Airochem Design/ Manufacture
40 Ton/hr Boiler tube thickness testing at site ( Job work as per Instructed by CE and Boiler Engineer). ( Fabrication & Machining work as per sample)
Autherised contracter
Erection & Commisionig & trial of fabricated work with KSB Boiler feed pump including suction/delivery pipe line work approved by Boiler Inspector.( Job work as per Instructed by CE and Boiler Engineer). ( Fabrication & Machining work as per sample)
Autherised contracter
IBR pipe line valve and other IBR welding work with Size 1/2'' to 6''Dia.( Job work as per Instructed by CE and Boiler Engineer)
Beam of boiler giving vibration during start up boiler at place of Super heater header. ( Job work as per Instructed by CE and Boiler Engineer)
Page 66
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
8
9 Autherised contracter1 No
10Repairing of old ID Fan Impeller ( As per sample ) OD- 2295mm, Width - 475mm 1 No
11 Autherised contracter1 No
12 Ultrasonic thickness test of fibrizer shaft ,mill shaft, centrifugal machine shaft. Autherised contracter2 Nos
Electrical Works
13High masts Lighting(with complete Instalation,commissioning and Testing) 24 Nos
14
15 Make Unit
16 Earthing Pit works(as per IS 3043) 1 no
17 Rebinding of motors ( Per Motor rate )
18 1HP to 5HP (With winding scrap)
19 1HP to 5HP (Without winding scrap)
20 5HP to 10 HP (With winding scrap)
21 5HP to 10 HP (Without winding scrap)
22 10 HP to 15 HP(With winding scrap)
23 10 HP to 15 HP(Without winding scrap)
NOTE- Rate Quated before site Engineer Discussion about job detail. ( Above (a),(b), (c) (d) (e) (f) ) Having 5 years experience in boiler work Autherised contracter
Dismentalling, Errection ,Fabrication work of platform per square MeterAutherised contracter
New Cone OD1 - 1820mm Bottom OD 1330mm , Hight - 770mm ,Fabricated by MS Plate 8mm thickness. Both side flange.( As per sample )
Autherised contracter
Dismentalling,Errection & fitting of side plate of Sugar Grader (With four decks,Cap-15T/Hr),Three Star Make
Electricfication(Wiring) work of Store Building and Colony Quarters (6A point) ( latest Indian Electricity Act)
Electricfication(Wiring) work of Store and Colony Quarters (16A point) ( latest Indian Electricity Act)
QuantityRequired
kirloskar/Triveni
kirloskar/Triveni
Autherised Contractor
Page 67
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
24 15 HP to 20 HP(With winding scrap)
25 15 HP to 20 HP(Without winding scrap)
26 20 HP to 25 HP(With winding scrap)
27 20 HP to 25 HP(Without winding scrap)
28 25 HP to 30 HP(With winding scrap)
29 25HP to 30 HP(Without winding scrap)
30 30 HP to 35 HP(With winding scrap)
31 30 HP to 35 HP(Without winding scrap)
32 35 HP to 40 HP(With winding scrap)
33 35 HP to 40 HP(Without winding scrap)
34 40 HP to 45 HP(With winding scrap)
35 40 HP to 45 HP(Without winding scrap)
To Repair ( Copper Rewinding)
1 MAHARAJA
2 AG-4 Grinder 2
3 AG-7 Grinder 2 Nos
4 Ceiling Fan (Volt-220-240V,AC-50hz,1phase, sweep-900mm) KHAITAN 1 Nos
5 Weight Machine 2 No
6 Cooler motor size 450mm(18''),380mm(15''),RPM-1400,Volt-220-230 VIJETA SUPER 1 Nos
7 Blower (6/3,6/12,11/5) 2 No
8 Motor - 5HP 2 Nos
9 Motor - 7.5HP 2 Nos
10 Motor - 10HP 2 Nos
Installation & commissioning of Turbo Feed Pump for Boiler
Description of Materials Make Unit
1ABB/ AMTECH/ BBL 1 Set
Installation & commissioning of ACVFD for Boiler ID Fan
1 1 set
Autherised Contractor
Sr. No.
Padastel Fan (RPM-2800,Volt-220-230,W-12, Sweep-20'')
Sr. No.
QuantityRequired
Turbo feed pump for Boiler suitable for capacity 25m3/hr, head 675 metre, working pressure -45 kg/cm2
COMPLETE ERRECTION AND COMMISSIONING of ACVFD DRIVE MODULE WITH CONTROL PANELS FOR ID Fan Application(for Motor-3 Phase Slipring Induction Motor of CG make,frame-NDW400L,KW-251,HP-337,A-498 ,RPM-740,,DUTY-S1,INS CL-F,RV/RA-510/300(with all material with power cables)
Page 68
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
Mfg. Department
PROCESS & CLEANING MATERIALS. (AUTHORISED DEALER / MANUFACTURER)
1
Micro screen
4 nos.
Any ISI
2
Micro screen
8 nos.
Any ISI
3
Micro screen
4 nos.
Any ISI
4
Micro screen
2 nos.
Any ISI
5
Micro screen
2 nos.
Any ISI
6 Any ISI 10 nos.
7 Turk head steel wire brush size 55.0 mm for Boiler Air heater Tube Any ISI 50 nos.
Nickel chrome screen size - 0.06 x 2.20 x 0.31, NHEC make NK 1100 machines.
Goyal Screen
Gurudev Engg.
Amson Industries
Nickel chrome screen size - 0.09 x 2.30 x 0.29, NHEC make NK 1100 machines.
Goyal Screen
Gurudev Engg.
Amson Industries
Brass linner (working face) for NHEC make NG-1250 model machine basket flat bottom & size 38” x 54”, capacity 1250 kg/charge.
Goyal Screen
Gurudev Engg.
Amson Industries
Brass screen 6 mesh for NHEC make NG-1250 model machine basket flat bottom & size 38” x 54”, capacity 1250 kg/charge.
Goyal Screen
Gurudev Engg.
Amson Industries
Brass screen 4 mesh for NHEC make NG-1250 model machine basket flat bottom & size 38” x 54”, capacity 1250 kg/charge.
Goyal Screen
Gurudev Engg.
Amson Industries
Extra heavy duty flexible shaft having 16 mm dia of inner core and 32 mm OD of casing, Thread type socket length 10 meter with attached hand
piece.
Page 69
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
8 Any ISI 50 nos.
9 -do- 100 nos.
10 Tube cleaning Cutter, size 42.0 mm “Suitable for 42mm ID (S.S. tube). -do- 150 nos
11 Tube cleaning Cutter size 87.0mm “Suitable for 87.0 mm ID (S.S. tube). -do- 20 nos
12 -do- 20 nos
13 Authorized dealer 4 Nos
14 -do- 20 nos
15 -do- 10 nos
16 -do- 20 nos
17 -do- 20 nos
18 50 nos
19 50 nos
20 1 set
21 -do- 20 nos
22 -do- 20 nos
23 Any ISI 2
Turk head steel wire brush size 42.5 mm “Suitable for 42mm ID (S.S. tube).
Turk head steel wire brush size 87.0mm “Suitable for 87.0 mm ID (S.S. tube).
Boring tool head cutter used for opening up badly chocked up tubes suitable for 42mm ID (S.S. tube).
Extra heavy duty flexible shaft having 16 mm dia of inner core and 32 mm OD of casing, thread type socket length 15 meter with attached hand piece.
Hand piece for Thread type socket extra heavy duty flexible shaft having 16 mm dia inner core & 32 mm OD of outer casing.
Spring Guard for Thread type socket extra heavy duty flexible shaft having 16 mm dia inner core & 32 mm OD of outer casing.
Motor socket for Thread type socket extra heavy duty flexible shaft having 16 mm dia inner core & 32 mm OD of outer casing..
Core socket for Thread type socket extra heavy duty flexible shaft having 16 mm dia inner core & 32 mm OD of outer casing.
Wire brush unikleen no -40 9x16 row 1.25 inch long wire thickness 28swg
uniflex
Feroflex
Wire brush unikleen no-70 4x11 row 1.25 inch long wire thickness 28swguniflax
Feroflex
Conveyor chain complete for Stitchwell Machine Company make Model No. ST-1000/80000 DX
Stithchwell
Niddle GB - 250 for Stitchwell Machine Company make Model No. ST-1000/80000 DX
Niddle for Revo make hand Stitching Machine Model No. DAD.
8 mesh, S.S. wire netting, Size - 2.0 x 4.5 mtrs. , 316 grade non megnetic. Pc
Page 70
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
24 10mesh, S.S. wire netting, Size - 2.0 x 4.5 mtrs. 316 grade non megnetic. Any ISI 2 Pc
25 12mesh, S.S. wire netting, Size - 2.0 x 4.5 mtrs. 316 grade non megnetic. Any ISI 2 Pc
26 14 mesh, S.S. wire netting, Size - 2.0 x 4.5 mtrs. 316 grade non megnetic. Any ISI 2 Pc
27 20 mesh, S.S. wire netting, Size - 2.0 x 4.5 mtrs. 316 grade non megnetic. Any ISI 2 Pc
28 Any ISI 2 Pc
29 Spray Engineering 20 nos
30 Spray Engineering 20 nos
31 Any ISI 20 nos
32 Any ISI 20 nos
33 Any ISI 4 set
34 Zig-zag wire for Vacuum Filter 8'x16' Any ISI 50 Nos
35 Brass Spray water Nozzels( Denco Type ) for vacuum filter 8'x16' Any ISI 50 Nos.
36 Brass Spray water Nozzels( Monark Type ) for vacuum filter 8'x16' Any ISI 50 Nos
37 Any ISI 2 set
S.S.TUBES
38Manfacturer
50 NosAuthorized dealer
60 mesh, S.S. screen for lime vibroscreen, 50" dia. 316 grade non megnetic.
Thermo Plastic Spray Nozzle With Rubber Ring for Evap./Pan Condenser of Spary Engineering Device.(As per Sample)
Thermo Plastic Jet Nozzle for Evap./Pan Condenser of Spary Engineering Device. (As per Sample)
Brass Nozzle for contineous centrifugal machine model no NK - 1100 of NHEC, Pune Make. (As per Sample)
Brass Nozzle for Batch type centrifugal machine model no. NG - 1250 of NHEC, Pune make. (As per Sample)
Spray water complete set for contineous centrifugal machine model no NK - 1100 of NHEC, Pune Make. (As per Sample)
Spray water complete set for Batch type centrifugal machine model no. NG - 1250 of NHEC, Pune make. (As per Sample)
S.S.Tube Length - 2005 mm, OD 45 mm & Thickness 1.5 mm ( IS-13316-1992 )
Page 71
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
39Manfacturer
100 NosAuthorized dealer
40Manfacturer
50 NosAuthorized dealer
41Manfacturer
100 NosAuthorized dealer
42
Katni
Manfacturer200 M.T.
Authorized dealer
43
HP
60 M.T.IOC
Authorized dealer
44
Excel / Authorised dealer
1000 kgsGACL / Authorised dealer
Punjab / Authorised dealer
Ballarpur/Authorised dealer
45 Aligen/ALPHOS - 85Any ISI
500 kgsDurochem
46 Subec C Bioculture for ETPSudarsan
600 kgs.Authorized dealer
47 Micronutrients ( Nutralisation chemical for E.T.P.)
Varuna
1000 kgs.Any ISI
Bioenzym
48 Ballarpur 300 kgs.
49 Formaldehyde (Formaline), 40 % pure minium.Nuchem
250 kgsBallarpur
50 Hydrogen peroxideNPL
250 kgs
S.S.Tube Length - 4055 mm, OD 45 mm & Thickness 1.5 mm ( IS-13316-1992 )
S.S.Tube Length - 4505 mm, OD 45 mm & Thickness 1.5 mm ( IS-13316-1992 )
S.S.Tube Length - 755 mm, OD 90 mm & Thickness 1.5 mm ( IS-13316-1992 )
Burnt Lime of active available CaO content minium 80%, Silica free, Packed with polythene bag.
Bright yellow Sulphur in granular form, Moist max. 1%, 99.9% pure and free from dust & Arsenic, Ash 0.05%.
Phosphoric Acid, Available P2O5 content 62%, Sp.gr. 1.69, Strength 85 % ( H3PO4) As per ISI 10508-1983
Isopropyle Alcohol based sugar Seed slurry of grain size 5-9 micron in 5 kg pack.
High Resilution Digital Polarimeter Range ±230 degs Z, Displace - 1 line by 16 characters back lit LCD display., Resulation/ accuracy ±0.05 degree Z, Response time - 5 degrees / second, Light source - tungsten-halogen lamp, Wave length - 882 nm, Measuring tubes up to 200/400 mm in leangth.
Page 75
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
95Qualigen
100 Gms.merk
96Qualigen
50 Gms.merk
97Qualigen
5 Ltr.merk
98 Amonium Buffer SolutionQualigen
2 Ltr.merk
99 Levoline Qualigen
2 Ltr.merk
100 Con. HCL, Sp.gr. 1.18 Standard ISI 20 ltrs
101 Con. H2SO4, Sp. Gr. 1.84 Standard ISI 20 ltrs
102
Loba chem.
20 kg Qualigen
Merk
103 Absulute Alcohol 99.9 % pure (500 ml Bottle) Standard ISI 10 Nos.
104 Universal pH Indicator Solution, 500 ml BottleQualigen
4 Nos.merk
105 Fehling's Solution "A"Qualigen
500 mlsmerk
106 Fehling's Solution "B"Qualigen
500 mlsmerk
107 Ammonium Hydrate Powder, LRQualigen
500 Gmsmerk
108 Sodium acetate powder, LRQualigen
500 Gmsmerk
109 Buffer Tablets pH 4.0Qualigen
2 pktsmerk
110 Buffer Tablets pH 7.0Qualigen
2 pktsmerk
111 Penciline Injection,Impluse40 Lac Qualigen
20 Nos.
Eriochrome Black T ( C20H12N3NaO7S )
Bromothymal Blue Indicator GR( C27H28Br2O5S)
Acetic acid glacial CH3COOH
Lead Acetate Basic Anhydrous (Lead sub accetate extra pure) (CH3COO)2 Pb.Pb(OH)
Page 76
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
111 Penciline Injection,Impluse40 Lac merk
20 Nos.
112 Platinum Dish Standard ISI 2 Nos.113 Digital flow meter, Cap. 30 T/hr ( For Final Molasses) Standard ISI 1 No.114 Sugar Mosture Analyser Digital Type Standard ISI 1 No.
115Toshiwal 1 NoElico
116 Pan sample checking Glass size- 50 mm x 75 mm x 5 mm Plain glass Standard ISI 20 Nos
117 Electronic Weighing Scale( For Laboratory Use ) Cap.-10 Kg Max. ISI Mark 1 Nos.
118 ISI Mark 1 Nos.
119 Electronic digital Analytical Weight Box ( 100g-1.0 Mg ) complete Set ISI Mark 1 Nos.
120 Digital Thermo Meter ISI Mark 1 Nos.
121 Digital hydro Meter ISI Mark 1 Nos.
122 Rain Fall Water Measurement Unit ( Rain Gauge ) ISI Mark 1 Nos.
PACKING MATERIALS123 Only Manufacturer 1,25,000 Nos.124 Only Manufacturer 1,000 nos
125 ISI mark 1000 nos
126 ISI mark 1000 nos
127 ISI mark 1000 nos
128 ISI mark 1000 bdls.
129 High-Efficiency Flooring (HEF) colour Black, Thickness 1.1 mm Standard ISI 70x30 Sq.M
pH meter( Digital ) with combined electrode. pH range 0-14 temperature 20-80° C. (Portable)
Electronic Compact Scale( For Laboratory Use ) SF-400 C, Cap- 300g X 0.01g
Printed HD PPE bags for filling 50 kg sugar of 11 x 11 mesh, size 59 cm x 90 cm with inner linner of 200 gauge size 61 cm x 94 cm weight not less than 160 gm±5 gm ( 100 gms Bag & 60 gms of inner linner) white colour. Inner linner of 200 gauge size 61 cm x 94 cm weight not less than 60 gms.
Printed white polythene peckets for filling sugar, Capacity 5 kg of 200 gauge.
Printed white polythene peckets for filling sugar, Capacity 2 kg of 200 gauge.
Printed white polythene peckets for filling sugar, Capacity 1 kg of 200 gauge.
Three play cotton stitching thread of stitching PP bag and length 1000 mtr per cone.
Page 77
Sr.Description/Specification of material
Make UnitQty.Req.Cost in Unit (In
Rs.)
Total cost including all
duties (In Rs.)Ramraks
129 High-Efficiency Flooring (HEF) colour Black, Thickness 1.1 mm Standard ISI 70x30 Sq.M
130 Avery India make 1 no
131 White Polythene, size 12 x 30 mtrs ISI Mark 6 nos
132 Black Pollythene, size 12 x 30 mtrs ISI Mark 6 nos
133FENNER
1 no
DUNLOP
134Dextron (Enzym) Varuna 1000 ltrs
Any ISI
135 Sight glass ( Size-120mm dia x 12 mm Thk.) for max. Temp 500°C ISI Mark 20 nos.
Electronic sugar Weighing Scale, Capacity 0-100 Kg ( Note_ commissioning,trial and one season service guarantee should be under your scope
High Pressure Rubber hose pipe size-1" dia x 100 M Length ,W.P./Bar 100 psi
Sr. Description/Specification of material Make Qty.Req. Unit Ramraks
1
De-shelling & re-shelling of old rollers size 660mm dia x 1220mm long
2 1 set
3 4 nos
4CI Top roller scrapper, net weight-91.50 kg
4 nos
5CI discharge roller scrapper, net weight-87.94 kg 4 nos
6 2 nos
7 1 set
Cost in Unit (In Rs.)
Total cost including all duties (In Rs.)
ISO certified
1. Convensonal rollers 2. Lotus roller
5 nos 1 no (Total 6nos)
nos
Materila details: The roller shell is of coarse grain cast iron having heardness 180-210BHN. The composition of the shell material shall conform to IS: and shall be : Total carbon - 3.2 to 3.6%, Manganese- 2.2 to 3.2%, Silicon- 1.2 to 2.2%, Phosphorus- 0.5%, Sulphure - 0.15% The cast iron shell is hot shrunk on forged steel shaft of 40C8 quality conforming is IS: 1570 or equivalent having minimum tensile strength of 58 kg/mm2. Hydrolically operated Grab for replacemant of existing mechanical grab of 5T capacity cane unloader: Capacity suitable for 5T cane unloader, Hydrolic power pack- 15HP motor, 1440rpm, 3 phase with sturdy heavy duty hydrolic cylinders. Unladen weight of grab 2500 kg, Optimum operation- 45 cycles per hour, Oil tank capacity 200ltrs.
ISO certified
Trash plate for 24x48 inches mill(1st,2nd,3rd,4th) Material -CS IS 1030, net weight-90kg(as per drawing) ISO
certified
ISO certified
ISO certified
C.S crown pinion , 16 teeth, OD-730mm, PCD-620mm, BORE-320mm, face width-300mm,Material-CS.Is 2708,NET WEIGHT-450KG (as per drawing no.A2-M-37135)
ISO certified
ID Fan 250KW, 415 VAC motor. RPM- 740, Drive current - 580A with ACVFD Control panel
ABB / ISO
certified
8 1 setTransparent type Drum Level Gauge for Boiler with complete fitting. Hydraulic test pressure 154 kg/cm2, IBR, Isolation Valve - Auto ball check Needle valve, Drain Valve – Needle valve, 25Nb flanged end.
0
Servicing/AMC of Machinaries and Equipments of Plants
Sr. No. Description of Materials Make Unit Approx value(RS) Remarks
1 OEM/Autherised Dealer 1 Set 300000
2 OEM/Autherised Dealer 1 Set
3 OEM/Autherised Dealer 1 Set
4 OEM/Autherised Dealer 2 sets 200000
5 Automation of DG set synchronization control panel (Modification work) OEM/Autherised Dealer 1 set 200000
6 OEM/Autherised Dealer 6 sets 120000
7 OEM/Autherised Dealer 3 sets 50000
8 OEM/Autherised Dealer 1 sets 100000
9 OEM/Autherised Dealer 7 sets 150000
10 Dynamic Balancing of Fibrizer, ID, FD, SA fan & continuous machine OEM/Autherised Dealer 11 set 100000
11 OEM/Autherised Dealer 1 set 25000
12 OEM/Autherised Dealer 3 sets 20000
13 OEM/Autherised Dealer 1 set 70000
14 OEM/Autherised Dealer 1 set 0
15 OEM/Autherised Dealer 3 set 20000
16 OEM/Autherised Dealer 2 set 0
QuantityRequired
Power Turbine Belliss Make HES 14 TYPE,3MW,T.A, Set No-BM/4808/B
Calibration of 3 MW TA set's Governor,model-UG-8,Make-Woodwards
DG set Make- GREAVES, (Type - TBD 2V12 MK.11, 320 KVA - 2 no)(AMC)
ABB/ Powerforma Make DC mill panel (DCS 800-SO2-820-5) - 4 nos Batch type C/F machine's panel (DCS 800-SO2-520-5) - 2 nos
AVR cum excitation control panel Generator - rating 3000KW, 415V, 50HZ, 3Phase,Excitation voltage - 150V DC, Current - 5A DC, (AVR Panel -2 nos,Excitation control panel-1 no.) Make - SANELEC Excitation system pvt. Ltd.T.G. control panel / ACB panels (Make- Contronics Switchgear Pvt. Ltd) (L&T ACB 3P 4000A- 2 nos, 1000A- 1no) ,SIEMENS 3P 1600A - 1no, 1250A - 2no, 1000A - 3no, 800A- 6nos) (Relay, Make AREVA - 10 nos)
NHEC, Pune make, Batch(Model-NG 1250) - 2 nos and continuous (Model-NK1100) type C/F machine - 5 nos
Air compressor (Centrifugal station) Make- Kirloskar ltd. (Model: EH-100M)
Compressor (Clarification House) Make- Kay International Ltd., Capacity - 300 m3/hr, Pressure - 1 kg/cm2.
DM Plant, Cap. 10 m³/hr. Make- Aquatech System
ETP Operation contract capacity 500 m3/day. make- Sai Envaro, have to provide polution clearance certificate from CECB, C.G.
Two stage industrial Air compressor (Boiler & PRD) - 3 nos Ingersoll Rand ltd. (Model - 2545)
Air Drier, GEM Pvt. ltd. HLN series.
17 OEM/Autherised Dealer 2 nos 0
18 Centrifuge/ Filtration of Turbine oil (Servo prime 68T) OEM/Autherised Dealer Ltrs. 100000
19 OEM/Autherised Dealer 2 No 40000
20 OEM/Autherised Dealer 4 Nos 70000
21 OEM/Autherised Dealer 3 Nos 600000
22 OEM/Autherised Dealer 1 No 50000
23 OEM/Autherised Dealer 2 Nos. 0
24 OEM/Autherised Dealer
4 Nos.
100000
25 OEM/Autherised Dealer4 Nos. 50000
26 OEM/Autherised Dealer1 set 70000
27 OEM/Autherised Dealer
Checking & Nitrogen Gas Filling in Bladder Accumulator of Mill House,Make
28 OEM/Autherised Dealer 5 no 0
Stitching machine servicing and spare parts. Make - Stitchwell Machine CompanyModel No. ST-1000/80000 DX, Make- Stitchwell
2500 (Approx)
DC motors(type-Z4-280-31-Y2 V1,Standard-JB/T6316-1992,KW-135,V-400,A-383,RPM-600/1400,IC-06,EXCIT-220V,14A,INS CL-F,DUTY-S1,COMMUTATOR No-609010,MAKE-SIMO
Direct Current Motor,Frame-ILFC280L,Output-225KW,Speed-1000/1100RPM,Armature-460V,526A,Field-220V,9.6/7.5A,duty-S1,Ins. Cl-F,Winding-Shunt,IP-23,IC-06(M/C No-20080034-01/02/03/04,Make-Integrated Electric,Co Pvt Ltd
CLARRIFIER'S Central shaft and Gate Valve servicing/repairing,make-Simplex
Water Ring Vacuum Pump,model No-PL-300, Type-A,Maximum Suction Capacity(with open Suction)-725m³/Hr,Maximum vacuum with Close suction-640MM of Hg,Sealing Water Required(At 30° C and at inlet Pressure of 1 Kg/cm²)-40 lit/min, Operating Speed 1250 RPM,Make-PPI Pumps Pvt. Ltd,Ahmedabad