This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Dismantling Joints • Service Saddles • Large Tolerance Saddle • Clamp Tee
Repair Clamp • Duc�le Cast Iron Fi�ngs • Push On Type Fi�ngs
Flanged Pipe Fi�ngs • Tapping Sleeves
About Dalian Xishun Foundry A Professional Factory since 2002
Dalian XishunFoundry Co., ltd. is located in Liaoning, Dalian which is famous for its interna�onal
port and abundant iron ore, coke, steel and other industrial raw materials. Our factory was
established in 2002, and we are a professional manufacturer of duc�le iron products. We have
the independent right of import and export.
With rich resources of pig irons, coke, steel and other industrial raw materials, we are one of the leading manufacturers of Ductile iron pipes, Ductile Iron Pipe Fittings, Flange Adaptors, Couplings, Dismantling Joints, Valves, Manhole Covers, Steel Flanges, Carbon steel pipe fittings, malleable iron pipe fittings, Rubber O rings, Fasteners. Pumps, Motor Shells and other Castings and Forgings according to different standards such as ISO2531, EN545, EN14525, ISO4422, ISO7005, DIN3352, BS5163, DIN3202, BS2494, BS4504, EN124 and other relevant ISO, EN, BS, DIN, ANSI, AWWA standards.
Expor�ng to More Than 25 Countries
Our products are widely used in pipeline systems for drinkable water, sewage, oil, gas, chemical
plants and so on, and they have been widely exported to Europe, the Middle East, Southeast Asia,
Africa, and La�n and South America. Till now, we have been expor�ng our products to more than
50 countries all over the world, and they are well accepted by the customers, which help us to
build a good reputa�on both in China and abroad.
Cooperate with Us Today
We always believe that prosperity due to integrity and capacity. We’d like to cooperate with
friends from all around the world to make a win‐win situa�on and be�er future.
Ductile Iron Fittings For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000
Service Saddles For DI,Steel,uPVC,CI,AC,GRP Pipe ISO2531:2000/BSEN545:2000
MATERIAL
BODY:DUCTILE CAST IRON OR CAST BRONZE 85-5-5%
STRAPS & NUTS:MILD STEEL,ZINC PLATED OR STAINLESS S TEEL NO304
GASKET:NEOPRENE OR EPDM,50-55SHORE,RESISTANT TO OIL ,ACID,NATURAL GAS
AT TEMPERATURE UP TO225 0F
COATONG
STANDARD COATING:RED OXIDE PRIMER,OR TAR EPOXY
HOT DIP GALVANIZED,FUSION-BONDED EPOXY AND RILSAN N YLON II COATING ALSO AVAILABLE.
FEATURES TECHNICAL DATA
·WI DE RANGE OF FIT
---CJM SERVICE &
WATER WORKS SADDLES ARE
DESIGNED FOR USE ON AC PIPE,
CAST CR DUCTILE IRON PIPE OR STEEL PIPE
· DOUBLE OR SINGLE STRAP CONSTRUCTION.
· STRAPS HAVE COLD ROLLED
THREADS FOR EXTRA STRENGTH
AND DURABILITY.
· WIDE RANGE OF TAP SIZES
---SADDLES ARE AVAILABLE
WITH 1/2〞THRU 2 〞IPT AND
BSPT OR CORPORATION TAP
SIZES.
· LIGHT WEIGHT/LOW COST
---SADDLES ARE RUGGEDLY
CONSTRUCTED OF HIGH GRADE
DUCTILE IRON OR BRONZE FOR
STRENGTH AND LASTING PERFORMANCE.
THIS CONSTRUCTION SAAURES LIGHT
WEIGHT HANDL ING FOR EASY,
LOW COST INSTALLATION.
· OREN SLOT ON ONE SIDE FOR
FAST,EASY INSTALLATION.
· MASSIVE O-RING PROVIDES PRIMARY SEAL-A
TIME-PROVEN DESIGN.
· SELF-SEALING HYDRO-DYNAMIC LIP.
---HIGH PRESSURE,WATER HAMMER
AND PRESSURE SURGES TIGHTEN
THE SEAL.
W.P PIPE
DN
PIPE O.D
RANGE
APPROX WEIGHT
(kg) DUCTILE (bar) BRONZE (bar)
mm mm SINGLE
STRAP
DOUBLE
STRAP
SINGLE
STRAP
DOUBLE
STRAP
SINGLE
STRAP
DOUBLE
STRAP
32 41-45 1.80 2.49 16 25 10 16
40 46-51 1.83 2.56 16 25 10 16
50 57-64 2.10 2.95 16 25 10 16
65 66-83 2.35 4.38 16 25 10 16
80 82-89 2.50 5.25 16 25 10 16
80 94-104 2.98 6.38 16 25 10 16
100 112-124 4.0 6.70 16 25 10 16
100 125-134 4.45 6.83 16 25 10 16
125 138-146 4.75 7.50 16 25 10 16
150 164-172 4.88 7.73 16 25 10 16
150 174-185 5.0 8.0 16 25 10 16
200 215-226 5.25 8.85 16 25 10 16
200 230-245 5.88 9.50 16 25 10 16
250 165-280 8.40 11.0 16 25 10 16
250 282-300 8.70 12.50 16 25 10 16
300 315-337 9.88 13.05 16 25 10 16
300 343-362 10.25 13.43 16 25 10 16
Large Tolerance Saddle ISO2531:2000/BSEN545:2000
Material:
1. Body: GGG40, coated with Rilsan
Nylon 11 blue color with 250 micrometer up.
2. Gasket: NBR
3. Assembling with 4 stud bolts, nuts and washers with AISI 304 material.
DN D D1 H L L1
63 3/4 38 57 124 100
63 1" 38 57 124 100
63 1 1/4" 40 62 124 100
63 1 1/2" 40 62 124 100
63 2" 40 68 124 100
75 3/4 40 63 135 110
75 1" 40 63 135 110
75 1 1/4" 40 68 135 110
75 1 1/2" 40 68 135 110
75 2" 40 73 135 110
90 3/4 40 71 150 110
90 1" 40 71 150 110
90 1 1/4” 40 75 150 110
90 1 1/2" 40 75 150 110
90 2" 50 80 150 110
110 3/4 40 71 170 120
110 1" 40 71 170 120
110 1 1/4" 40 85 170 120
110 1 1/2" 50 85 170 120
110 2" 50 90 170 120
125 1" 40 87 192 120
125 1 1/4" 40 93 192 120
125 1 1/2" 50 93 192 120
125 2" 50 98 192 120
140 1" 40 96 208 120
140 1 1/4" 40 100 208 120
140 1 1/2" 50 100 208 120
140 2" 50 106 208 120
160 1" 40 106 230 120
160 1 1/4" 40 111 230 120
160 1 1/2" 50 111 230 120
160 2" 50 116 230 120
200 1" 40 132 282 120
200 1 1/4" 40 132 282 120
200 1 1/2" 50 137 282 120
200 2" 50 137 282 120
Clamp Tee (PN10/16) For DFor DFor DFor D....IIII.... P PP Pipeiippeeipe ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000ISO2531:2000/BSEN545:2000
Material: Working pressure:
EN-GJS500 or QT 420-10 or ASTM A536 65-45-12or GGG50 Pressure test 350 psi(24 bar), working pressure 230 psi(16 bar).
Gasket: Bolts and nuts:
NBR suitable for natural gas usage, EPDM for potable water Bolts with nut and washer. Bolts BS EN20898-1: 1992 Grade 4.8
PRESSURE SIZE
(DN )
FLANGE
DRILLING(DN)
PIPE OD
RANGE(mm) PN 10/16
BOLT SIZE
(mm)
BOLT
QUANTITY
L
(mm)
H
(mm)
C
(mm)
80 80 95-98 PN 10/16 M16�65 4 220 165 160
100 80 115-118 PN 10 /16 M16�65 4 220 175 180
100 100 115-118 PN 10/16 M16�65 4 240 180 180
150 80 167-170 PN 10 /16 M20�70 6 220 205 240
150 100 167-170 PN 10/16 M20�70 6 240 210 240
150 150 167-170 PN 10/16 M20�70 6 290 220 240
200 80 219-222 PN 10/16 M20�70 6 220 235 290
200 100 219-222 PN 10/16 M20�70 6 240 240 290
200 150 219-222 PN 10/16 M20�70 6 290 250 290
200 200 219-222 PN 10/16 M20�70 6 340 260 290
250 80 270-274 PN 10/16 M24�85 8 220 270 350
250 100 270-274 PN 10/16 M24�85 8 240 270 350
250 150 270-274 PN 10/16 M24�85 8 290 290 350
250 200 270-274 PN 10/16 M24�85 8 340 290 350
250 250 270-274 PN 10/16 M24�85 8 390 300 350
300 80 322-326 PN 10 /16 M24�85 8 220 300 400
300 100 322-326 PN 10/16 M24�85 8 240 300 400
300 150 322-326 PN 10/16 M24�85 8 290 320 400
300 200 322-326 PN 10/16 M24�85 8 340 320 400
300 250 322-326 PN 10/16 M24�85 8 390 330 400
300 300 322-326 PN 10/16 M24�85 8 440 340 400
Repair Clamp
Material:
1.Bend
Stainless steel AISI 304
2.Body
GGG40,EN-GJS.400-15UNI EN 1563
This kind of clamp are used to quick repair the leaked pipes.
Lt is consist of onestainless bend,one set of bolt,two special
Casting parts,and one sheet of NBR gasket, the cast body
Can be Rilsan 11 Nylon coating or Hot dip Galvanized.
The size range are from DN15 to DN200.
DN (mm) DN Range L (mm) Weight(kg)
80 3" 88-110 200 7.0
100 4" 100-120 200 7.0
100 4" 108-128 200 7.5
100 4" 114-137 200 7.5
125 5" 138-160 200 8.0
150 6" 160-182 200 8.0
200 8" 195-217 200 8.5
200 8" 216-238 200 9.0
200 8" 229-249 200 9.0
250 10" 240-262 200 9.5
250 10" 250-273 200 9.5
200 8" 229-249 300 13.5
250 10" 240-262 300 14.0
250 10" 262-284 300 14.0
250 10" 273-296 300 14.0
300 12" 295-315 300 14.0
300 12" 324-346 300 16.0
350 14" 346-368 300 16.0
350 14" 365-387 300 17.0
400 16" 410-432 300 17.0
Size Inch Range U.Wgt
DN15 1/2 21-25 0.24
DN20 3/4 26-30 0.25
DN25 1 33-37 0.27
DN32 11/4 42-45 0.38
DN40 11/2 48-51 0.39
DN40 11/2 50-54 0.39
DN50 2 60-64 0.49
DN65 21/2 69-73 0.50
DN65 21/2 71-76 0.50
DN80 3 87-93 0.51
DN80 3 94-100 0.52
DN80 3 99-104 0.65
DN100 4" 105-111 0.65
DN100 4" 112-117 0.66
DN100 4" 120-126 0.66
DN100 4" 126-131 0.66
DN125 5" 131-136 0.69
DN125 5" 139-145 0.72
DN125 5" 149-155 0.72
DN150 6" 156-162 0.74
DN150 6" 167-173 0.76
DN175 7" 173-179 0.76
DN200 8" 217-223 0.80
DN200 8" 223-229 0.82
D u c t i l e C a s t I r o n F i t t i n g s For uPVC Pipes DIN 8061/8062
Mob:15205799916, 13606566995
Push On Type Fittings
For uPVC Pipes DIN 8061/8062
Push On Type Fittings For uPVC Pipes DIN 8061/8062