The Single Platform For Indian Plastics News & Business (M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]http://www.polymerbazar.webs.com To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price Revision, Send JOIN SAMYAK to 9219592195 Web site:www.polymerbazar.webs.com We are also available on twitter:www.twitter.com/polymerbazar POLYMERBAZAR: Daily Mail Alert (21/7/2010, Wednesday) Sr.No. Last Domestic Price Revision W.E.F. 15/7/2010 Polymers Up /Down Revision (RS/.KG) 1 Poly Propylene No Change TQ No Change MA/RAFFIA No Change 2 Poly Ethylene All other H.D.P.E DOWN Rs.1/kG H.D.P.E injection DOWN Rs.2/kG H.D.P.E. film DOWN Rs.1/kG L.L.D.P.E. DOWN Rs.2.5/kG L.D.P.E DOWN Re.1/kG H.M. Film DOWN Rs.1/kG 3 Poly Vinyl Chloride NO Change
14
Embed
Daily Polymer Rate (International & Domestic) Dt 21/7/2010
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The Single Platform For Indian Plastics News & Business
terephthalate) $ From $ To Port Import Duty,(1 $=Rs.47)* Report $
P.E.T $ 1250 to $ 1260 Stable CFR China Rs. 75263 To 75841 -25
Note:
1.) Care has been taken for Polymer rate & accuracy part is concerned. This rate gives a general idea & over View of International Rate of diff.polymers.There are chances of having rate difference depending upon qty.,port,origin & payment terms.
The Single Platform For Indian Plastics News & Business
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
2.) Data given here above has been collected from reliable sources & published in good faith only.We don’t take any responsibility for the decision taken basis on any part of this report.
3.) Calculation of imposed duty in respective polymer has been taken in general, pl. consider Anti-dumping duty to any sp. polymer, port or make if it is applicable.
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
1001 Normal 75.5 74.5 77 76.5 75.75 76 77.5
HM film
Titan Normal 66.5 65.5 68 67.5 66.75 67 68.5
SABIC Normal 67.25 66.25 68.8 68.25 67.5 67.75 69.25
MOBIL Normal 68 67 69.5 69 68.25 68.5 70
MHPC Normal 67.5 66.5 69 68.5 67.75 68 69.5
LDPE –lamination
HANWAH Normal 98 97 99.5 99 98.25 98.5 100
TITAN Normal 99 98 101 100 99.25 99.5 101
Market News (World wide):
battenfeld-sincinnati submit a twin-screw extruders with parallel screws Wed 21 July 2010 | Topic: Hardware
The exhibition "K", which will take place this year, the company battenfeld-sincinnati (Bad Oynhauzen / Vienna) will introduce a novelty - a new series of twin-screw extruder with parallel screws. This is the first joint development of new unit Construction, formed through the merger of Battenfeld Extrusionstechnik and Cincinnati Extrusion. By combining the experience the developers managed to create a generation of extruders, optimized for the processing of PVC, which differs significantly increase productivity while increasing the efficiency of energy use. Thanks to technological length 34D twin-screw extruder new battenfeld-sincinnati parallel moving in the opposite direction augers, demonstrates impressive performance. Four models with screw diameters from 78 to 135 mm in the production of PVC profiles cover a capacity range from 100 to 1000 kg / h, compared with earlier versions of both producers meet growth by almost 25%. Increased productivity helps as part of the elongation process and the application of new chetyrehvalnogo reducer. The most powerful at the moment the drive in conjunction with an AC motor provides high torque and better performance. U-shaped structure contributes to the drive unit is mounted very compactly, so, despite the lengthening of the technological part, the extruder size is not increased. Other advantages of the new-generation twin-screw extruders are not maintenance-free, self-adjusting temperature control system of screws, as well as insulated elements of the cylinder, providing energy savings. Universal basic screw geometry, due to lengthening of the technological part, has a longer zone of heating, which provides a very gentle processing of material. Twin screw extruders are fitted with dosing, thermally isolated from the hopper, so additional water cooling is not required. To ensure the maximum possible lifetime of the technological part augers are molybdenum coating, and the cylinder nitrate. Finally, the extruder is easy to manage thanks to the use increased to 19-inch touch panel.
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Today's Available Material:
PP: Raffia, H 100 EY, H 110 MA: Ready SRM 100 NC, MI 3530: Stock nil, next lot is expected soon SRN 20 NC: Stock nil, next lot is expected in short time. HPL PP=1110 Inj. moulding: Ready HDPE: ---- Inj. mldg: Gail I50A180, HPL 5818, M60200: Ready Blow mldg.: Gail B 52: Ready HM-HDPE: Imported MHPC, Gail F 55, HM 5400, Libya (Imported): Ready LLDPE: ----- Film: F19010: Ready Roto: Material is ready. inj. mldg; M26500: Ready Imported LL: Ready LDPE: ---- General Purpose: 24 FS 040:Ready. Inj.mldg:16 MA 400: Ready Lamination: LA 1070, Titan 801YY, Hanwah: 955: Ready (We offer material available with us at the time of mailing this list, grade availability & qty. may vary depending upon time to time. Pl. confirms your requirement at the earliest, as We will serve till mat. is available with us)
The Single Platform For Indian Plastics News & Business