MODEL: D7100-2 Series MODEL: D7500-2 Series STYLE FLAT D-RUNG EXTENSION LADDER LOAD CAPACITY Ofin ||*o Combined weight OUU IDSi ol user andmaterials. Extra Heavy Duty/Professional Use TYPE IA i\Wl lift' Yellow electrically non-conductive side rails External guides at top of base section securely interlock rails Heavy duty pulley with rope Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement Slip-resistant Traction-Tred® D-rungs ^ Rugged gravity spring locks operate smoothly Rope clamp ties rope to rung Durable rail shield and shoe bracket protects rail from damage SPECIFICATIONS - Mar-resistant molded end caps Pre-pierced holes for easy field installation of accessories Interlocking side rails Base and fly separate easily to use base section as single ladder Nylon coated internal guides on bottom of fly section increase • ease of operation Exclusive Alflo® rung joint means Twist-Proof 8 performance Model D7124-2 Shoe with slip-resistant pad and spur plate Model No. D7116-2* D7120-2 D7124-2 D7128-2 D7132-2 Total Length Sections 16' 20' 24' 28' 32' Maximum Working Length 13' 17' 21' 25' 29' Approx. Cu, Ft. Per Unit 7.0 8.7 10.3 12.0 13.7 Approx. Shipping Wt. Lbs. 41,0 49.0 58.0 66.0 79.0 t Note: D7116-2 is not equipped with rope and pulley DIMENSIONS Rails: Flange: Rungs: Fly Width: Base Width: 3-5/16" wide 1-3/16" wide 1-1/2" 16-1/8" outside rails 19" outside shoes STYLE FLAT D-RUNG EXTENSION LADDER Orange electrically non-conductive side rails Hi-strength nylon coated guides at top of base section reduce friction for ease of operation Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement Slip-resistant ——— Traction-Tred® D-rungs Rugged gravity spring locks operate smoothly Rope clamp ties rope to rung Durable rail shield and shoe bracket protects rail from damage —— SPECIFICATIONS Mar-resistant molded end caps; vinyl coated aluminum hoop end caps on 36' and 40' models Pre-pierced holes for easy field installation of accessories Single pulley system; double pulley system on 36' and 40' models Base and fly separate easily to use base section as single ladder Non-separable sections on 36' and 40' models Nylon coated internal guides on bottom of fly section increase ease of operation Exclusive Alflo* rung joint means Twist-Proof 9 performance Model D7520-2 Shoe with slip-resistant pad and spur plate Model No, D7516-2* D7520-2 D7524-2 D7528-2 D7532-2 D7536-2 D7540-2 Total Length Sections 16' 20' 24' 28' 32' 36' 40' Maximum Working Length 13' 17' 21' 25' 29' 32 1 35' Approx. Cu. Ft. Per Unit 7,9 9,8 11.6 13.5 15.4 23.8 26.7 Approx. Shipping Wt. Lbs. 45,0 53.0 62.0 70.0 81,0 114.0 128.0 t Note: D7516-2 is not equipped with rope and pulley DIMENSIONS Rails: Flange: Rungs: Fly Width: Base Width: 16' to 32' 3-1/2" wide 1-3/1 6" wide 1 -3/4" 16- 1/8" outside rails 20-1/4" outside shoes 36' and 40' 4" wide 1 -3/4" wide 1 -3/4" 1 6-3/4" outside rails 22" outside shoes 12
3
Embed
D7100-2 Series MODEL: D7500-2 Series FLAT D-RUNG … · Werner offers ladders made from fiberglass, aluminum and wood. Fiberglass Werner was the driving force behind the development
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MODEL: D7100-2 Series MODEL: D7500-2 SeriesSTYLE FLAT D-RUNG EXTENSION LADDER
LOAD CAPACITYOfin ||*o Combined weightOUU IDSi ol user and materials.Extra Heavy Duty/Professional UseTYPE IA
i \ W llift'
Yellow electricallynon-conductiveside rails External guides at top of
base section securelyinterlock rails
Heavy dutypulley with rope
Plate and rung assembly areriveted at four points to each siderail to allow for rung replacement
Slip-resistantTraction-Tred® D-rungs
^
Rugged gravity springlocks operate smoothly
Rope clamp tiesrope to rung
Durable rail shield and shoebracket protects rail fromdamage
Single pulley system;double pulleysystem on36' and 40'modelsBase and flyseparate easily touse base sectionas single ladderNon-separablesections on 36'and 40' modelsNylon coatedinternal guideson bottom of flysection increaseease of operation
Exclusive Alflo*rung jointmeansTwist-Proof9
performanceModelD7520-2
Shoe with slip-resistantpad and spur plate
Model No,D7516-2*D7520-2D7524-2D7528-2D7532-2D7536-2D7540-2
TotalLength
Sections16 '20'24'28'32'36'40'
MaximumWorkingLength
13 '17 '2 1 '25'29'321
35'
Approx.Cu. Ft.
Per Unit7,99,8
1 1 . 613.515.423.826.7
Approx.ShippingWt. Lbs.
45,053.062.070.081,0
1 1 4 . 0128.0
t Note: D7516-2 is not equipped with rope and pulley
All Type II, I and IA fiberglass, aluminum and wood ladders, ladder jacks andextension planks meet or exceed code. OSHA CODE applies to ladders used inthe workplace. Werner Ladder Co. recommends Type II or heavier duty ratedladders for these applications.
UNDERWRITERSLABORATORY CODE
SERIES COMPLY WITH U.L. STANDARDS AS NOTED:Aluminum Ladders...............................................................................................AII SeriesLadder Jacks.............,,,....,,..,.,.................,.,,,..,,..........,..................,,,,.,.,..............All SeriesAluminum Extension Planks...............................................................................All SeriesFiberglass Ladders................................................................,........NO U.L. STANDARDS
NOTE: No ANSI, OSHA or U.L Standards have been written for atticladders for overhead access.
SAFETY//SWIART•$^._S £ w
**MtAV*
All Werner fiberglass ladders have electricallynon-conductive rails. This is a great benefitfor those working near electricity. Fiberglassrails also maintain a smooth surface evenafter weathering,
Werner ladders areproudly made in U.S.A.
CORPORATE HEADQUARTERSWerner Ladder Co.93 Werner RoadGreenville, PA 16125-9499Tel. (724)588-8600 • FAX (724) 588-0315
How to Placean OrderCall our Customer Service Department at (724) 588-8600from 8:00 AM to 5:00 PM (EST), Monday through Fridayor FAX your order to (724) 588-0315.
Note: All Special Order items are designated with a double asterisk(Example: 7516-2**\"^ i
Table of ContentsSeries
Fiberglass Stepladders5900 / 5900S Series . . , , , . . , , , .P5900 Series (Platform Ladders) ...6002 Model (Step Stool) , , , . . . . . .6000 / 6000S Series . . . , . . , . . , ,T6000 Series (Twin Stepladders) .,,PT6000-4C Series (Stockr's Ladders8
Werner Co. - the world's leading manufacturefa.0f^..
Werner is a state-of-the-art fully integrated manufacturerand distributor of fiberglass, aluminum and wood climbingproducts, Control of every step of the manufacturing processensures quality and allows flexibility to serve the needsof our customers.
Standard of the IndustryWerner ladders are made to last, Our products are backedby over 50 years of product design, testing and evaluationexperience. We begin with the best quality raw materials andexpertly manufacture those materials into high-strength laddersdesigned to perform year after year. We convert raw materials,such as aluminum ingot and fiberglass ravings, into the siderails, rungs and other parts used to make ladders, stages,scaffolds and accessories,
All Werner ladders are designed and manufactured to thesame rigorous quality standards and with a common goal ofbuilding the safest climbing equipment possible. Our productsare designed and manufactured to meet or exceed OSHAand ANSI requirements,
Werner offers ladders made from fiberglass,aluminum and wood.
FiberglassWerner was the driving force behind the development offiberglass ladder products. Fiberglass ladders have becomethe leading choice for both consumers and professionals due totheir great value, appearance and suitability for a wide range ofapplications, Werner uses a proprietary process to manufacturefiberglass reinforced ladder rails, Glassravings and structural glass mat areimpregnated with a thermoset resin andthen pulled through a temperature-controlled die to create finished ladderrail, Fiberglass pultrusions are made innumerous colors, are electrically andthermally non-conductive and haveexcellent structural and weatheringproperties, Werner's equipment isdesigned in-house specifically forladder rail production to offer the bestquality and control,
>C
TechnologicallyAdvanced Material:Multiple layers of uni-directional glass rovingsand multi-directionalglass structural matcreate the strong, durableWerner fiberglass rail.