D3.2 Version: 1.0 Date: 2012-09-03 Author: VTT Dissemination status PU Document reference D3.2 Analysis of the existing methodologies supporting innovation and solution engineering Project acronym: SustainValue Project name: Sustainable value creation in manufacturing networks Call and Contract: FP7-NMP-2010-SMALL-4 Grant Agreement no.: 262931 Project duration: 01.04.2011 – 31.03.2014 (36 months) Co-ordinator VTT VTT Technical Research Centre of Finland (FI) Partners: POLIMI Politecnico di Milano (IT) UiS Center for Industrial asset management, University of Stavanger (NO) FIR Research Institute for Operations Management at RWTH Aachen University (DE) DIN DIN, The German Institute for Standardization (DE) FIDIA FIDIA (IT) Riversimple Riversimple LLP (UK) CLAAS CLAAS Selbstfahrende Erntemaschinen GmbH (DE) ELCON Elcon Solutions Oy (FI) UC University of Cambridge (UK) This project is supported by funding from the Nanosciences, Nanotechnologies, Materials and new Production Technologies Programme under the 7 th Research Framework Programme of the European Union.
58
Embed
D3.2 Analysis of the existing methodologies supporting ... · PDF fileAnalysis of the existing methodologies supporting innovation and solution ... D3.2 Analysis of the existing methodologies
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
D3.2
Version: 1.0
Date: 2012-09-03
Author: VTT
Dissemination status PU
Document reference D3.2
Analysis of the existing methodologies supporting
innovation and solution engineering
Project acronym: SustainValue
Project name: Sustainable value creation in manufacturing networks
0.1 2012-04-18 Pasi Valkokari Outline of deliverable
0.2 2012-06-12 Katri Valkokari Draft deliverable
0.3 2012-08-17 Pasi Valkokari Draft deliverable
0.4 2012-08-23 Pasi Valkokari Draft deliverable
1.0 2012-09-03 Pasi Valkokari Final
Quality control
Role Who Date
Project manager Teuvo Uusitalo 2012-09-04
Disclaimer
The content of the publication herein is the sole responsibility of the publishers and it does not
necessarily represent the views expressed by the European Commission or its services.
FP7-262931 SustainValue D3.2v1.0
Page 5 of 57
1 Executive summary
Existing methodologies supporting innovation (management) and solution engineering are collected
and checked against the developed requirements presented in D3.1. The result of this step is an
overview on which part of which existing methodology achieves which requirements regarding
sustainability. This overview is a basis for the creation of a new development methodology towards
life-cycle based products and services.
Since the business model aspects are covered in the work package 2 of the SustainValue project, this
report focuses on current innovation and solution engineering methodologies that are used in
manufacturing industry. They are studied from the following perspectives according to the life cycle
of a product:
business strategy development and innovation management
management of design, planning and development
management of manufacturing systems
management of distribution, logistics and services
management of usage
end- of- life cycle management
The study reveals that there are various methodologies that could be used in order to support
innovation and solution engineering within manufacturing industry during development activities.
All the presented methodologies are considering at least some of the elements of sustainable
development.
According to the gap analysis of the studied methodologies, strategic approach to sustainability is
needed, while the key challenge is to identify what is the company-specific sustainability recipe.
Furthermore, companies cannot comprehensively reach sustainability objectives alone in the
present networked manufacturing environment. Therefore it is important to consider sustainability
at a network level over product life cycles.
FP7-262931 SustainValue D3.2v1.0
Page 6 of 57
Terminology
Business architecture (D2.1)
The link between business strategy with the business processes, roles, behaviours and information’ (Wolfenden & Welch, 2000).
Business architecture is conceptualised to structure the responsibility over business activities prior to any further effort to structure individual aspects (processes, data, functions organization, etc.) (Versteeg & Bouwman, 2006).
Business ecosystem is the network of organizations – including suppliers, distributors, customers,
competitors, government agencies and so on – involved in the delivery of a specific product or
service through both competition and cooperation. The idea is that each business in the
“ecosystem” affects and is affected by the others, creating a constantly evolving relationship in
which each business must be flexible and adaptable in order to survive, as in a biological ecosystem
(D1.1).
Business model
It is a conceptual tool containing a set of objects, concepts and their relationships with the objective to express the business logic of a specific company or a company network. Therefore it has to be considered which concepts and relationships allow a simplified description and representation of what value is provided to customers, how this is done and with which financial consequences (Osterwalder et al., 2005). (D1.1)
Business model is the way in which a business chooses to create, deliver, capture and exchange value (D 2.1: working definition for SustainValue project).
(Carbon) footprint is an indicator of total greenhouse gas emissions caused by an entity. It is the
overall amount, expressed in terms of CO2 equivalents, of carbon dioxide and other greenhouse gas
(GHG) emissions associated with a product, using LCA methodology. A carbon footprint is only one
ecological footprint; other indicators include e.g. water footprint and services footprint.
Framework supports understanding and communication, and exploration of structure and relationship within a (business/industrial) system for a defined purpose (Shehabuddeen et al., 1999). D2.1.
Innovation: Innovation is a new idea that can be commercialized and is significantly better than an
earlier solution. The innovation can be related to products, services, technologies, business and
Innovation management: Innovation management is management of a process creating potential
for the emergence of innovations (e.g. Drejer, 2003; Boer & During, 2001).
Life cycle assessment (LCA): Compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle (EN ISO 14040, 2006).
Life cycle costing (LCC): Life cycle costing is the process of economic analyses to assess the total cost
of acquisition and ownership of a product. It can be applied to the whole life cycle of a product or
parts or combinations of different life cycle phases (IEC 60300 3-3, 2004). Life cycle profit is a
broader term than life cycle costing. In life cycle profit calculations the expected profits gathered
during the chosen life cycle phases are considered.
FP7-262931 SustainValue D3.2v1.0
Page 7 of 57
Method is a series of steps describing how to accomplish or approach some objectives (see D2.3).
Methodology: Framework clustering, evaluating and employing methods and tools (see D3.1).
Model supports the understanding of the dynamic interaction between the elements of a
(business/industrial) system (Shehabuddeen et al., 1999) (see D2.3).
Procedure: Specified way to carry out an activity or a process with a defined beginning and end
point (adapted from ISO 9001) (see D3.1).
Process is an approach to achieving a managerial objective, through the transformation of inputs
into outputs (Shehabuddeen et al., 1999) (see D2.3).
Product data management (PDM) PDM is an engineering discipline that includes different methods,
standards and tools to manage product data during the product’s entire life cycle (Crnkovic et. al.,
2003). See also Product life cycle management (PLM).
Product life cycle management (PLM) is the process of managing the entire life cycle of products;
from the design, production, support, and use to final disposal. From a technical and business
perspective, PLM is an integrated, IT supported, approach to the co-operative management of all
product related data along the various phases of the product life cycle (See Terzi et al., 2010).
Product – Service – System (PSS): A product service system can be defined as the result of
innovation strategy, shifting the business focus from designing and selling physical products only, to
selling a system of tangible products and intangible services which are jointly capable of fulfilling
specific customers’ needs (adapted from Manzini and Vezzoli, 2002).
Requirement: A requirement is a notation about the characteristics or the output of a PSS or a
solution, a process or the resources which are used in the processes (adapted from Van Husen 2007,
p. 32).
Service engineering: The systematic development and design of services employing interdisciplinary
models, methods and tools (cf. Bullinger & Schreiner, 2002) (see D3.1).
Service system: Service systems are dynamic configurations of people, technologies, organisations
and shared information that create and deliver value to customers, providers and other stakeholders
(White Paper of Service Science, 2007).
Solution: A solution is defined as combination of tangible products and intangible services to fulfil
customers’ needs. More broadly, a solution may be a product, a service, a new operating practice, a
new business model, etc., or a combination of any or all of these (see also definition of innovation).
Solution Engineering: Solution engineering uses systematic approaches, methods and tools to
develop a desired solution (draft definition for SustainValue project).
Stakeholder
Stakeholder is an individual or group that has an interest in any decision or activity of an organization (ISO2600, 2010) (D1.3).
FP7-262931 SustainValue D3.2v1.0
Page 8 of 57
The key stakeholders discussed in relation to sustainability, primarily, include workforce, environment, suppliers, community (consumers/citizens), governments, international organisations, non-government organisations (international and local) and the media (D2.1).
Sustainability is a state that requires that humans carry out their activities in a way that protects the functions of the earth's ecosystem as a whole (ISO 15392, 2008).
Sustainability has an economic, an environmental and a social dimension (ISO 15392, 2008).Corporate responsibility and triple bottom line (Elkington, 1997) address these as three pillars of sustainability (D2.1).
Sustainable manufacturing can be defined as the ability to smartly use natural resources for
manufacturing by creating products and solutions via a network of suppliers, partners and
collaborators that due to new technologies, regulatory measures and coherent social behaviour are
able to satisfy sustainability - economical, environmental and social objectives. Thus preserving the
environment, while continuing to improve the quality of human life and remaining financially viable
for the long term by returning adequate profits and growth (developed from Garetti and Taisch,
2011 and D1.3) (see D2.2).
Sustainable solution: A sustainable solution is defined as combination of tangible products and
intangible services to fulfil stakeholders’ needs that deliver sustainable value (environmental, social
and economic objectives) (see D3.1)
Sustainable manufacturing network is an organisational form which (i) targets to gain future
competitive edge to all participants through interaction and collaboration, and thereby (ii) is able to
balance the three key aspects of sustainability (environmental, economic and social aspects) (see
D1.1).
Tool
is a resource / mechanism that facilitates the practical implementation of transformations of inputs into outputs (i.e. process) at different steps of accomplishment (i.e. method) (see D2.3).
Tools are utilities supporting the execution of methods on a detailed level (Bullinger and Schreiner 2002, p. 72f.) (see D3.1).
Value network
Value network generates economic [environmental and social] value through complex
dynamic exchanges between one or more enterprises, customers, suppliers, strategic
partners and the community. These networks engage in more than just transactions around
goods, services, and revenue (Allee, 2000; see D2.2).
Value network consists of organizations (companies) co-operating with each other to benefit
all network members. In manufacturing industries lead producer and its suppliers and
customers form a typical value network (see D1.3).
Value network, i.e. a group of three or more organizations, should be connected in ways that
facilitate achievement of a common goal (Provan et al., 2007; see D4.1).
FP7-262931 SustainValue D3.2v1.0
Page 9 of 57
2 Introduction
The overall goal of the SustainValue project is to develop industrial models, solutions and
performance standards for new sustainable and more performing manufacturing and service
networks. According to the project’s original work description, key challenges that sustainable
manufacturing must respond to are:
economic challenges, by producing effectively and efficiently and creating new services
ensuring development and competitiveness through time
environmental challenges, by promoting minimal use of natural resources (in particular non-
renewable energy) and managing them in the best possible way while reducing
environmental impact
societal challenges, by promoting social development and improved quality of life through
renewed quality of wealth and jobs
2.1 The purpose of the deliverable D3.2
The purpose of this deliverable is to collect information on current methodologies of innovation
(management) and solution engineering, and to compare them against the requirements identified
in task 3.1 (presented in D3.1 Definition of requirements of the new solutions development
methodology). The deliverable aims not to compare the different methodologies with each other
since they all have many different viewpoints and are continuously evolving. In other words, the
deliverable targets to be a checklist about different life cycle management methodologies that are
already utilised in modern manufacturing networks and to analyse their potential with respect to
sustainability. In the following tasks of WP3 the relevant methods and tools will be further studied.
In D3.1 the requirements are separated into requirements for sustainable solutions (Table 2 in
Chapter 5.3 in D3.1) and into requirements which concern requirements of a solution or a product-
service system (Table 4 in Chapter 7.3 in D3.1). The requirements for sustainable solutions (summary
in Table 2 on p. 22) are the baseline for the analyses in this report, while the aim is to consider
sustainability requirements management over the borders of individual companies, i.e. at a value
network level1. The requirements concerning the development process of sustainable solutions are
considered in Chapter 4 of this report (design, planning and development phase).
Innovation and its management as well as solution are defined broadly within this report. Innovation
is a new idea that can be commercialized and is significantly better than an earlier solution.
Innovation can be related to products, services, technologies, business and organizational models,
operational processes, or operational methods (Paasi & Valkokari, 2010). Similarly, a solution may be
a product, a service, a new operating practice, a new business model, or a combination of any or all
of these. Furthermore, innovation management considers the management of a process creating
potential for the emergence of innovations (e.g. Drejer, 2003; Boer & During, 2001). This broad
1 This is based to SustainValue vision presented in D1.1: New forms of business models and value networks
together enable knowledge-based transformation of the manufacturing industry and improve all three
dimensions of sustainable value (economic, environmental, and social).
FP7-262931 SustainValue D3.2v1.0
Page 10 of 57
definition of innovation is in accordance with emerging practical literature of innovation. The focus
in practically oriented innovation research has shifted increasingly towards examining entire
companies from the perspective of innovation management (e.g. Tidd et al., 2005; Davila et al.,
2005; Apilo, 2010; Paasi & Valkokari, 2010) as opposed to earlier product development studies (e.g.
Ulrich & Eppinger, 2004; Cooper, 2000).
The broad definition of innovation requires also broad view to sustainable development and its clear
connection to business development. In other words, the SustainValue project aims to identify the
business opportunities and define new business modelling tools and methods that take into account
sustainability. In accordance with this several authors (for instance Maxwell & van der Vorst, 2003;
Jayal et al. 2010; Gunasekaran & Spalanzani, 2011) have suggested need for integrating sustainability
through the life cycle approach, although they have slightly different viewpoints of the phases.
These approaches are in accordance with the structure of this report and D3.1 which makes a
distinction between five stages: (1) design, planning and development, (2) manufacturing, (3)
distribution, logistics and services, (4) usage and (5) end-of-life cycle. In order to highlight the
importance of a strategic approach to sustainability, the five stages presented in D3.1 have been
complemented with business strategy development and innovation management phase (see Figure
1).
2.2 Sustainability challenges of manufacturing networks
In this report (D3.2.) existing methodologies supporting innovation and solution engineering are
studied based on a life cycle view presented in Figure 1. The life cycle description aims to combine
the aspects related to strategy development and issues related to the life cycle management of the
product and solutions that a manufacturing network is producing. For the sake of clarity the life-
cycle is presented as linear in Figure 1, although in practice the life cycle of one product is at least
partly circular.
Figure 1. Life cycle definition used as a baseline of the study.
In practise life cycle phases are intertwined to each other and thereby development methods as well
as requirements are also linked to each other. For instance, Aurich et al. (2007) have described the
product service system engineering process as Life Cycle Management (LCM) that includes two
product life cycles - manufacturers and customers (see D3.1.). In the present networked business
environment the challenge to manage sustainability requirements are even more complicated than
this. Thus, it is relevant to consider sustainability requirements management of the present
methodologies by taking into consideration the overlap between life cycle phases and value
network. While exploring the life cycle of a manufacturer’s particular solution, several life cycles of
different solutions could be identified that are influencing sustainability. Figure 2 aims to illustrate
this complexity in the manufacturing value networks.
FP7-262931 SustainValue D3.2v1.0
Page 11 of 57
Figure 2. Life cycles that are influencing the life cycle of manufacturer’s particular solution.
Strategic approach to sustainability is important in order to take into account the requirements of
customers and network partners. As a matter of fact, it is crucial that an actor is capable to identify
its position in the network. This makes it possible for the actor to recognize in what way it could have
an effect on sustainability of the manufacturing network and its solutions (see case example in
chapter 3.1.2).
Sustainable development must have a clear connection to several levels of organizational decision
making and performance management, e.g. starting from the strategy, to the portfolio management
and further to an individual new product development project. Similarly, business models are
considered as a link between the strategy and operational level (see Figure 2 in D1.1). Since the
business model aspects are the focus of the WP2, this report focuses on innovation management
and solution engineering methodologies used in manufacturing. In addition to the manufacturing
principles and relevant methods addressed in this report there are also several standards targeting
sustainability. These standards are studied in WP4. (see D4.1 for a summary). Furthermore, WP4
aims at the development of a governing framework for sustainability performance.
2.3 The structure of the deliverable
Figure 3 illustrates the structure of the report and how it is connected to life cycle view (Figure 1).
Individual methodologies are discussed in one chapter, although many of them consider several life
cycle phases.
FP7-262931 SustainValue D3.2v1.0
Page 12 of 57
Figure 3. The structure of report.
FP7-262931 SustainValue D3.2v1.0
Page 13 of 57
3 Business strategy development and innovation management
Current management paradigms emphasize innovativeness, flexibility and agility. To be successful in
an ever-changing networked business environment, companies must be proactive and innovative as
well as operationally efficient (Hamel, 2007; Gupta, 2010). In accordance with SustainValue vision
innovation management and business development are key elements in sustainability. The business
model aspects are dealt with in WP 2 in more detail.
In terms of future sustainable manufacturing industry and its competitive advantages, the current
manufacturing models which are based on the old paradigm of unlimited resources and unlimited
capacity for regeneration need to be updated (Garetti & Taisch, 2011). In present networked
environment another important viewpoint is strategic collaboration within all life cycle phases. The
companies must consider with whom to collaborate in order to gain the objectives and more
importantly how to ensure the commitment of the involved actors.
3.1 Strategic decisions, competitive edge and differentiation
Since Porter’s (1986) presentation of value chain activities external network positioning has been
perceived as key success factor in manufacturing industry. Porter observed that configuration and
coordination of a company’s (value chain) activities assist in ‘economies of scale, comparative
advantage (location of activity performed), cost advantage, differentiation, reinforcing brand
reputation and flexibility in responding to competitors’ (Porter 1986, p. 20-21). Later on, the
approach of “core competence” argues that firms which rely on the complementary competencies
of other firms and focus more intensively on their own areas of competence will perform better than
firms that are vertically integrated or incoherently diversified (Prahalad & Hamel, 1990). Similarly,
different network management and service business approaches highlight, that due to the growing
complexity of products (and services), firms must in certain instances depend on external resources
and capabilities.
Today, companies’ perceptions about sustainability are already changing. As in the past, company
representatives see the potential for supporting corporate reputation, but recently they have also
come to expect operational and growth-orientated benefits in cutting costs and pursuing
opportunities provided by new markets and products (Bonini, 2011). It has been even argued that
there is a currently growing market for sustainability and that companies are already using
sustainability to gain a position over competitors (Nidumolu et al., 20092). Thus, sustainability must
be aligned also to other strategic targets of an individual company as well as targets of its network
partners. If the customers are requiring sustainability and consider it critical, the companies must
respond to this requirement in order to continue to compete. Furthermore, to be on top, companies
must find new ways to implement sustainable development practices.
2 In their recent article “Why Sustainability Is Now the Key Driver of Innovation” Nidumolu et al. (2009) argue
that in future only companies that make sustainability a goal will achieve competitive advantage. They
describe a five-phase model for change process towards sustainability: 1) Viewing compliance as Opportunity,
2) Making Value Chains Sustainable, 3) Designing Sustainable Products and Services, 4) Developing New
Business Models and 5) Creating Next-Practice Platforms.
FP7-262931 SustainValue D3.2v1.0
Page 14 of 57
Many companies these days are advertising either “going green” or “green practices” in operations.
Still, companies have much ahead if it is to realise the opportunities presented by sustainable
production and business operations. Development towards sustainability can open new means for
differentiation, e.g. both operational and growth-orientated benefits and new business
opportunities that support manufacturers in finding their “blue ocean strategy” (concept originally
presented by Kim & Mauborge, 2005). Still, strategic considerations, e.g. why to develop sustainable
solutions, are required in order to gain these benefits.
3.1.1 Methods used in strategy development
As mentioned in the introduction business modelling process configured in WP2.33 is overlapping
with strategy development, because a business model provides a link between the strategy and
operations and enables exploitation of entrepreneurial opportunities (see Figure 2 in D1.1). Thus,
related to the business modelling process there are several existing methods, which can be utilised
also in strategy development. Such are for example: Scenario building SWOT, Tukker & Tischer
(2006) sustainability SWOT and (value) network or stakeholder analyses. These methods will not be
covered in this report.
As pointed out also in D2.3 most of these methods are typically used at a company level. SWOT
analysis, for instance, is frequently used for analysing the external (opportunities and threats) and
internal (strengths and weaknesses) environment of a company in order to support decision-making
processes. Thus, sustainability requirement management over life cycle phases requires network
level considerations.
3.1.2 Case example about sustainability and strategy
The case company operates as supplier of industrial products, which it integrates to a tailored
system solution to its B-to-B customers. Figure 4 presents its network position. In the upstream
direction there are large component and equipment suppliers, as well as network partners
participating in assembly, manufacturing or R&D. In downstream there are B-to-B customers and
end-users from several sectors. From the life cycle management point of view there are several life
cycles as presented also in Figure 4.
3For a summary see D2.3 titled: “Proposed design of new methods & tools, within the overall architecture”.
FP7-262931 SustainValue D3.2v1.0
Page 15 of 57
Figure 4. Network picture of case company (modified from the network picture presented as Figure
26 in D4.1).
Identifying the key players and their roles within different network dimensions is the first step in
order to develop sustainable solution within this value network. The case company stated that its
products are typically customized solutions for its B-to-B customers, who are project suppliers of
larger systems and integrate the solutions delivered by the case company to their own offerings to
end- users.
According to their business model as a project supplier, these B-to-B customers are usually not
responsible for the operational phase and related activities (e.g. maintenance) that add to the life
cycle costs. Thus, the sourcing price is an important decision factor for them. On the other hand, the
case company typically purchases components to its customized solutions from large component
and equipment suppliers. Although it cannot directly influence these suppliers and their
sustainability development targets, it can make – at least in some cases – its own purchasing
decision in accordance with its sustainability principles.
3.2 Innovation management and exploration of business opportunities
As already pointed out in Chapter 2 innovation management is strongly linked to new product
development, and thereby the innovation process (or funnel) is often presented as a linear process
starting from research phases. Nowadays, within networked and uncertain business environment
actors are more and more trying to find new ways to link market needs and drivers with available,
feasible and possible technology into specific and desired business opportunities (Phaal et al., 2004;
Paasi & Valkokari, 2010). Figure 5 presents this kind of a broader framework for the innovation
development. This report has a similar broader view to innovation and its management.
FP7-262931 SustainValue D3.2v1.0
Page 16 of 57
Figure 5. Innovation process model (developed in the INNORISK project).
Before an opportunity can be evolved into an innovation, one needs a strong ability to make
important strategic decisions, a capability to conceptualise the opportunity and to transform it into a
final product and, importantly, to manage risks related to commercialisation. A major challenge
related to success and sustainability of innovations concerns the question of timing so that the
market needs will be met at the moment of the innovation launch. Thus, business concept
development should be better linked to the fuzzy-front end of innovation management.
The development of new lines of business starts from the recognition of an opportunity. What
follows is more or less fuzzy, and therefore the front end of innovation process is often called the
fuzzy-front end. On the other hand, the front end is not uncontrollable. Managing (or co-ordinating)
the front end is the key for successful as well as sustainable innovation.
As presented in Figure 6 new concept development (NCD) within the fuzzy-front end of innovation
process consists of five elements: 1) opportunity identification, 2) opportunity analysis, 3) idea
generation and enrichment, 4) idea selection, and 5) concept definition (Koen et al., 2002). The NCD
engine starts with an idea for a new business opportunity, but it thereafter does not have to proceed
in the given order (Paasi & Valkokari, 2010).
FP7-262931 SustainValue D3.2v1.0
Page 17 of 57
Figure 6. New Concept Development (NCD) model (engine) with its five core elements (modified
from Koen et al.,2002, Presented in Paasi et al., 2007).
Foresight and market studies supplies input into the NCD engine. R&D is an interactive link to
research which may cover a large network of players. There are several critical decision making steps
within the process. Thus, early decision making and connection to sustainability also supports the
effective use of resources throughout the innovation process. Several methods can be utilised in
order to manage uncertainty within new concept development. Next chapter (3.2.1) considers the
most relevant methods.
3.2.1 Methods used in innovation management
Similarly to strategy development also innovation management methods are overlapping with tools
supporting business modelling process, which are dealt with in D2.3. Scenario analyses and PESTEL,
for instance, are shortly described. Forecasting, backcasting, roadmapping, sign posting, and
customer observation are examples of other methods which can be utilised also in innovation
management and business development.
The roadmap for future sustainable manufacturing business model development priorities
(presented in D1.1) was formed based on a visionary roadmapping process (Ahlqvist et al., 2010).
Figure 7 represents the main elements of visionary roadmapping (VTT Backpocket Roadmap used as
an example). Although science and technology foresight, including roadmaps, is typically used by
national governments to ‘support long-range planning for economic and social policy development’
(Calof et al., 2006), it can be utilised also to vision building. A road mapping process also helps to
facilitate collaboration and visioning among companies within industries, in the formation of joint
industry–government research programmes, and in many other venues.
FP7-262931 SustainValue D3.2v1.0
Page 18 of 57
Figure 7. The elements of visionary roadmapping (VTT Backpocket Roadmap).
Similarly to roadmapping also forecasting and backcasting methods are originally methods of future
studies, which have later on also adapted to vision building and strategy work at company and
industry levels. Forecasting and backcasting methods, although quite similar, differ from each other
based on the reasoning mechanism. A manager backcasts by identifying a desired future state and
then by considering which of several strategies in the present is most likely to bring that state about.
A manager forecasts by identifying several strategies in the present and then by considering the
different future states that each strategy is likely to cause (Ebert et al., 2009).
At a strategic initiative level signpost is one forecasting method for adaptive contingency planning
(Strong et al., 2007). The signposting process integrates several forecasting tools with business
opportunity recognition and it can therefore be suitable also for solving the challenging questions
about timing of innovations and preparing for unexpected. Figure 8 illustrates the signposting
process that explores the future by several different means.
Figure 8. Signposting process (modified from Strong et al., 2007).
FP7-262931 SustainValue D3.2v1.0
Page 19 of 57
Within the signposting process the point of view analysis targets to identify strategic initiatives that
are both significant and desirable. These analyses are closely connected to business architecture and
business model processing which are dealt with in WP2. Scenarios and technology landscapes are
used to explore the business opportunities generated by technology development. The target is to
further evaluate the vision areas. Based on these steps the relevant potential futures are covered
with candidate signposts and further analysed in order to identify that signal business model shifts
and generate technology bridges. (Strong et al., 2007)
3.3 Remarks concerning business strategy and innovation
management
This chapter consists of a summary of different business and innovation management practices and
their aspects regarding sustainability. The practices mainly focus on economic elements, e.g. on the
continuity of business and new business opportunities created by sustainable development.
The work in task 3.1 did not directly form requirements for business strategy or innovation
management. Still, the management paradigms are dealt with here in Chapter 3 because they form a
basis for sustainable development and must therefore be considered. Because companies must be
proactive and innovative as well as operationally efficient, several viewpoints regarding sustainable
development must be considered and linked to strategic decisions.
FP7-262931 SustainValue D3.2v1.0
Page 20 of 57
4 Management of design, planning and development phase
As pointed out also in D3.1 theories for systematic technical product development have existed for
decades and evolved into a great number of theories. In this chapter the most relevant
methodologies for management of the requirements listed in D3.1 (Table 2) are discussed. The
methodologies related to development overlap especially with the methodologies related to
manufacturing. They are discussed in Chapter 5.
4.1 Methodologies regarding design and planning
Most of product’s costs are determined during its design phase. Thus, approaches regarding design
and planning are important to sustainable development. However, sustainability of one product is
always a limited consideration, because products are typically connected to each other, e.g. their
production and use is a systemic phenomenon.
Approaches of systems engineering, new product development (including product portfolio
management), service development and “design for excellence”- approaches are covered here.
4.1.1 New product development (portfolio management)
Portfolio management is about project prioritisation and resource allocation to achieve new product
objectives for the company. It is a dynamic decision process where the list of active new products
(offerings) and R&D projects (utilisation of capital and human resources) is constantly revised.
Portfolio management asks questions like: Which new product projects, from the many
opportunities the company faces, will it fund? And which ones will receive top priority in order to
utilise company resources in the best way to operationalise the company's strategy?
Portfolio management is also about finding and maintaining the right balance between short-term
offerings and projects supporting current lines of business, and long-term offerings and projects that
create new business (Figure 9).
FP7-262931 SustainValue D3.2v1.0
Page 21 of 57
Strategic planning
Offering planningTechnology
scanningOpportunity
scanning
Portfolio Assessment
Portfolio
ReviewProj. Review process
Resource
Management
Competence
Development
Other
Demands
NP proj.
Portfolio Management
Technology Roadmaps Product Roadmaps
Market informationR&D information
Figure 9. Offering planning and portfolio management activities (adapted from Patterson, 2005).
Figure 9 aims to illustrate the hierarchical view of management related to new product development
projects and connections to strategic decision making. The target of the strategic co-ordination by
portfolio management is simply: Do the right development projects!
4.1.2 Management of a new product development project
One of the most referenced models for the management of the new product development projects
is the stage-gate model introduced by Cooper (2000). The model proposes that, product
development projects are evaluated on the desired gates based on strategically important criteria.
In the next deliverable D3.3, a development methodology will be developed based on the results of
D3.1 and D3.2. As a very common structure of different development methodologies “Stage-Gates”
have been used in many development methodologies. The stage-gate model will be used here too as
a basic conceptual model for the development methodology. This model subdivides the whole
development process into different “stages” with set quality controls, the “gates”, after each stage.
The stages resemble the different “proof of design activities” which have to be done in the
development process. In other words the gates serve as check points within the process to
guarantee the quality of each completed stage. (cf. Cooper, 2000, see also chapter 4.1.1)
Figure 10. Basic concept of modified stage-gate process.
FP7-262931 SustainValue D3.2v1.0
Page 22 of 57
A stage-gate model enables the management to synchronize activities throughout the whole life
cycle for a solution. This is important because methods regarding life cycle management can only be
used if certain aspects have been considered within the process of development. These elementary
aspects can be synchronized directly with the development stages of the stage-gate process and be
controlled by each appropriate gate.
Beside Cooper’s five basic key stages it is furthermore relevant to extend Cooper’s stage-gate
process to cover every step within a life cycle of a system. The steps and each fitting gate focus on
the development process of sustainable solution. Especially regarding the market phase and each
appropriate gate it is important that these gates as well serve the development process. Considering
sustainability within the development process it is important to investigate the market and to get
feedback of the customers or different stakeholders towards different topics e. g. regarding a
sustainable handling or a sustainable recycling of the products, to optimize the development
process. In general it is not necessary in the development process to create a total life cycle
management but important topics and criteria at the different stages of the life cycle e.g. the end of
life of a product should also be considered. Thus after the step of “launch”, for instance, it is
necessary to consider the life cycle phases of “implementation” and “market”. The final definition of
the stage-gate process for sustainable solutions will be done in deliverable D3.3. Here the focus lies
on the general idea and the basic and simple construction of the model which will be used further
on. However, literature research shows that plenty of engineering procedures are dealing with
different stages or gates. The number of stages and gates vary depending on the approach. In
general the literature research shows that following superior four phases imply all topics of the
procedure to realise a sustainable solution. The four main phases are shown in figure below (Figure
11).
Figure 11. Main phases and gates of sustainable stage-gate process.
FP7-262931 SustainValue D3.2v1.0
Page 23 of 57
It seems to be useful to integrate gates inbetween these main phases. When reaching the end of
one phase and starting the next phase some defined milestones must be fulfilled. As meantioned
above the detailed definition of milestones and the final number of gates will be concretized in D3.3.
However, to indicate which topics (requirements) must be dealt with during the development
process, the four main gates between the four general phases are used for this document D3.2.
According to the stage-gate model (Cooper et al., 2001, 2002); the gate assessment of the
development projects should be cover following four goals:
1. Value maximisation of the portfolio for certain resource expenditure. To fulfil this goal, an appropriate financial tool is developed, which includes risks and probability factors.
2. Ensuring the right mix of projects. To enable a company to be more certain that the set of development projects is balanced between chosen key parameters (e.g. risk vs. reward, cost vs. timing, strategic vs. benefit, etc.) various tools are to be developed.
3. Attaining a strategically aligned project portfolio. Considered here is whether the company's development projects or investments in them are consistent with the current business strategy.
4. Reaching the right number of development projects for the available resources of the company. Tools to match up this aim cover aspects of resource constraints, including the identification of requirements for competence development.
4.1.3 Systems Engineering
Systems Engineering is an interdisciplinary field of engineering focusing on how complex engineering
projects should be designed and managed over their life cycles. Issues such as logistics, the
coordination of different teams, and automatic control of machinery become more difficult when
dealing with large, complex projects. Systems engineering deals with work-processes and tools to
manage risks on such projects, and it overlaps with both technical and human-centred disciplines
such as control engineering, industrial engineering, organizational studies, and project management
(Haskins, 2007).
Although Systems Engineering deals with the system or product requirements in general, the
methodology can also be applied when product sustainability requirements are managed through
the product life cycle.
4.1.4 Service development and solution engineering
Service development requires new logic of value co-creation with several actors. In other words,
service development is strongly linked to network approaches. This has been highlighted especially
in the approach of service dominant logic (Evolving to a New Dominant Logic for Marketing (Vargo &
Lusch, 2004)). The most commonly cited dimensions of a service concept include (Hakanen &
Jaakkola, 2012):
the core content of the solution, the essence of the service that meets the customer need
the operations and processes needed to create the solution
the customer experience of the process
the outcome of the service, and its value to the customer
referred to as leagile. According to Martin Christopher, when companies have to decide what to be,
they have to look at the Customer Order Cycle (the time the customers are willing to wait) and the
lead time for getting supplies. If the supplier has a short lead time, lean production is possible. If the
COC is short, agile production is beneficial.
5.1.3 Sustainable and green manufacturing
Green manufacturing focuses on environmental issues whereas sustainable manufacturing highlights
innovativeness and even new business opportunities offered by sustainability (Jawir, 2008).
International Trade Administration (2007) defines Sustainable Manufacturing as follows: design and
manufacture of high quality/performance products with improved/enhanced functionality using
energy-efficient, toxic-free, hazardless, safe and secure technologies and manufacturing methods
utilizing optimal resources and energy by producing minimum wastes and emissions, and providing
maximum recovery, recyclability, reusability, remanufacturability, with redesign features, and all
aimed at enhanced societal benefits and economic impact. On the other hand, in SustainValue
project sustainable manufacturing is defined as the ability to smartly use natural resources for
manufacturing by creating products and solutions via a network of suppliers, partners and
collaborators that due to new technologies, regulatory measures and coherent social behaviour are
able to satisfy sustainability - economical, environmental and social objectives. Thus preserving the
environment, while continuing to improve the quality of human life and remaining financially viable
for the long term by returning adequate profits and growth (developed from Garetti & Taisch, 2011
and D1.3) (see D2.2). This definition of Sustain Value project aims to highlight the system thinking
and holistic view to sustainability, e.g. how value networks actors can create sustainability together.
Thus, the current methods typically consider sustainability and its management within one company
although the need for sustainable development within supply network has been identified as
pointed out also by the vision of the SustainValue project. For instance, organizational strategies in
“Sustainable green supply chain” contains following elements: innovativeness, outsourcing, re-
engineering, environment cautious servicing, closed loop systems (Sundarakani el al., 2010). In order
to find the best practices to all these elements, several disciplines have been governed in this report.
Thus, Supply Chain Management (SCM) has also been approached, for a very long time, as not
unifying but coordinating the operations of (a) independently managed entities (b) who seek to
maximize profits (only) individually. This point of view is a major obstacle to achieving sustainability
in supply chain operations. On the contrary, for sustainability, supply chains must be designed and
managed as an integrated system. (Jayal et al., 2010).
Furthermore, in D 4.1 it has been argued that the notion of supply chains is misleading as chains do
not take into account lateral interrelations. However, for sustainable manufacturing, we do need to
take these interrelations into account and thereby the concepts of (supply or) value networks should
be utilised. Furthermore, sustainable manufacturing network should be defined as an
organisational form which (i) targets to gain future competitive edge to all participants through
interaction and collaboration, and thereby (ii) is able to balance the three key aspects of
sustainability (environmental, economic and social aspects) (see D1.1).
FP7-262931 SustainValue D3.2v1.0
Page 33 of 57
5.2 Methodologies regarding ethical sourcing, trade and consumerism
In the last 10 years active discussions on social issues - like child labour, companies running
‘sweatshops’, workers’ rights and on indigenous people – have emerged corporate social
responsibility to corporate strategies. Concurrent division of work has, on the other hand,
emphasized sourcing and related ethical principles. “Ethical sourcing” means ensuring that the
products being sourced are created in safe facilities by workers who are treated well and paid fair
wages to work legal. The Ethical Sourcing module is also a voluntary supplement for SQF 1000 or SQF
2000 Certified Suppliers.
Also other concepts, like ethical trading, fair trade and ethical consumer highlight social issues and
global moral within decision making. Still, as the concepts aim to influence on decision making of
individuals they are connected also to product use phase (Chapter 7). On the other hand, due to
various political attributes it can be stated that they are connected also to the design and
development phase. The Ethical Trading Initiative is an alliance of companies, trade unions and
voluntary organisations, who work in partnership to improve the working lives of poor and
vulnerable people across the globe, whereas Ethical consumerism is a type of consumer activism
practiced through 'positive buying' in that ethical products are favoured, or 'moral boycott', that is
negative purchasing and company-based purchasing. Still, these concepts are often criticised from
their western-country- or brand owner origins, e.g. the programs reach only limited number of
producers or do not sufficiently consider long-term impacts to local environment in developing
countries.
5.3 Remarks concerning manufacturing and sourcing management
This chapter will include a table of different manufacturing engineering, sourcing, and maintenance
practices and their aspects regarding sustainability. All the principles have some overlapping
approaches to sustainability. First, different manufacturing principles have been evolved during
several decades – each of them highlights different aspects, like agility, flexibility, efficiency or
innovativeness of manufacturing operations. Thus, their connection to sustainability is strongly
linked to the economic dimension. Secondly, ethical sourcing and trading approaches focus on the
social dimension of sustainability.
In the following table (Table 3) the main contribution, in what sense known engineering approaches
cover the requirements presented in D3.1 is evaluated and summarized in following Table 3.
FP7-262931 SustainValue D3.2v1.0
Page 34 of 57
Table 3. Comparison of requirements for management of manufacturing systems (D3.1) and current
methodologies.
Requirements defined in D 3.1 Manufacturing
methodologies
Sourcing methodologies
Requirements concerning business relationships (X) X
Requirements concerning transparency of used
components and goods
X X
Requirements concerning the manufacturing of
the solution
X
Requirements concerning the value network (X) (X)
As can be realized based on the above table, current manufacturing engineering and management
approaches are typically focusing on activities and practices of focal companies, and thereby also the
sustainability development is driven by their objectives and boundary setting. The main challenge in
sustainable manufacturing system is, how to connect different [manufacturing and/or supply chain]
decisions on different hierarchical decision levels to each other, and to their sustainable impact
(Aronsson & Brodin, 2006). In that sense approaches dealing with network and life cycle aspects are
required. Especially, it is important to create network -level approaches which support actors to set
joint sustainability targets and ensure change from sub-optimization to system thinking (see also
D1.2 and D4.1).
FP7-262931 SustainValue D3.2v1.0
Page 35 of 57
6 Management of distribution, logistics and services
This chapter considers the sustainability aspects within present methodologies related to
distribution, logistics and services. The approaches related to new service development were already
discussed in chapter 4 as they have a clear link to new product development.
6.1 Distribution and logistics
Distribution and logistics are often presented as one step within the value (or supply) chain and
manufacturing phase. Recently, their importance has been highlighted, because customer
orientation has been growing also within manufacturing engineering approaches. On the other
hand, both in the inbound and the outbound logistics “green thinking” has been emphasized due to
its impact on environmental and energy footprints.
Similarly to manufacturing phase using supply and distribution chain scorecards to measure a
supplier’s sustainability is becoming widespread throughout the transport and logistics industry. Still,
also here the main challenge is to turn from sub-optimization to system thinking and co-
development of sustainability issues.
6.1.1 Green logistics and distribution
Logistics is the integrated management of all the activities required to move products through the
supply chain, from raw material to end products. Some examples of green logistics include: shipping
products together, rather than in smaller batches; using alternative fuel vehicles for manufacturing
and shipping; reducing overall packaging; utilizing raw products which are harvested in a sustainable
way; building facilities for manufacturing and storage which are environmentally friendly; and
promoting recycling and reuse programs. Similar means are identified also within green distribution.
The concept of reverse logistics has also been introduced within the discussion sustainability of
logistics industry. It stands for all operations related to the reuse of products and materials. Reverse
logistics stands the process of moving goods from their typical final destination for the purpose of
capturing value, or proper disposal. Remanufacturing and refurbishing activities also may be
included in the definition of reverse logistics and thereby it has a clear connection to the concepts of
3R’s and 6R’s discussed in the end of life cycle phase of the report (Chapter 8). Thus, there is also a
connection between reverse logistics and customer retention. Reverse logistics has become an
important component within service business development, aiming at retaining customers by
bundling even more coordination of a company's services data together to achieve greater efficiency
in its operations.
6.2 Service operations
The methods related to the development of new services are discussed in Chapter 4. Thus,
implementation of service operations and changes within manufacturing industry as well as
definition of service are shortly considered here.
Service involves a provider and a customer working together to create value. Accordingly, service
systems can be defined as dynamic configurations of people, technologies, organisations and shared
FP7-262931 SustainValue D3.2v1.0
Page 36 of 57
information that create and deliver value to customers, providers and other stakeholders5. Within
the manufacturing industry the trend of customers, lead producers (like original equipment
manufacturers and product companies) and their suppliers seems to be a forward transfer in their
value chains. This means that customers and lead producers outsource manufacturing (give up
earlier value chain phases) and their suppliers try to increase services (add later value chain phases
and give up some of the earlier). Suppliers provide not only raw materials and finished products, but
also transportation, energy, packaging, design and re-cycling services.
Transfer from product to service, or solution, orientation opens new possibilities to sustainable
development within manufacturing industry. While the service development requires new logic of
value co-creation with several actors (see Chapter 4.1.4) also sustainable development can therefore
be considered from the multilevel approach. Tukker and Tischner have even discussed whether
Product Service Systems are automatically more sustainable than “conventional” product based
solutions (D3.1).
6.3 Remarks concerning management of logistics, distribution and
services
This chapter includes a summary of different logistics, distribution and service engineering practices
and their aspects regarding sustainability. These are closely connected to manufacturing engineering
approaches presented in Chapter 5. All the approaches have some overlapping views to
sustainability.
First, green logistics has its main focus on environmental (and energy) efficiency. Secondly, service
development approaches emphasize typically economic aspects, like business development and
value co-creation between involved actors.
In the following table (Table 4) their main contribution, in what sense known engineering
approaches are supporting sustainable decision making is evaluated.
Table 4. Comparison of requirements for distribution, logistics, services (D3.1) and current methodologies.
Requirements defined in D 3.1 Distribution and logistics Services
Requirements concerning training (education) and
assistance
(X)
Requirements concerning suitable services
(monitoring, inspections, consultancy, ICT-
solutions etc.)
X
Requirements concerning delivery chain/networks X (X)
5 In 2007 the University of Cambridge Institute for Manufacturing (IfM) and International Business Machines
Corporation (IBM) organized a symposium on service science, management and engineering in Cambridge (UK) where leading experts in the field discussed the new discipline of service science. The symposium resulted in a discussion paper where (among other issues) the terminology of service business was defined. [Succeeding
Through Service Innovation: A Discussion Paper, University of Cambridge, Cambridge, available at:
The current distribution and logistics methodologies have the focus on one product and its
environmental and energy footprints. Thus, they are more operational than strategic approaches
and thereby the link to strategic decision making is typically missing, e.g. companies may calculate
and follow the environmental footprint of their products (or logistics) but they may not have
considered what they should do in order to change their customer’s thinking towards sustainability.
FP7-262931 SustainValue D3.2v1.0
Page 38 of 57
7 Management of usage phase
Requirements related to usage phase and its management differs in B-to-B and B-to-C markets.
Concerning B-to-C markets, incentives like ethical and fair trade6 have already been discussed
Chapter 5.2 and Birth of Blue (Werbach, 2008)7 highlights consumer expectations. This report
focuses mainly on B-to-B markets, where the life cycle approach challenge the network actors to
new kind of benefit and cost sharing. On the other hand, the D4S approach focuses already on
requirements of B-to-C markets.
All the requirements related to the usage phase should be considered already in the design and
planning phase, where most of product (and life cycle) costs are defined. Similarly, the requirements
of usage are also relevant within manufacturing phase regarding the usage of manufacturing
equipment and they are often considered also in manufacturing and maintenance methodologies.
The main challenge of the usage phase in B-to-B is related to cost and benefit sharing between the
actors (like customer, operator, and supplier), because the decisions made in one phase influence
and impact on sustainability and costs in other phases. For instance, in recent years suppliers have
developed their capabilities in order to operate as performance partners and offer knowledge
intensive life cycle services to their customers. Through this development suppliers have larger
responsibilities on life cycle – costs and sustainability impacts of produced products or their
components, and they may also have better possibilities to influence.
7.1 Quality, safety, health and environmental management
As pointed out in above chapters and illustrated in Figure 12 there are several management trends
with overlapping concepts evolving together. Each of these management trends have their own
traditions and their modern versions also include sustainability aspects; for instance safety
management is closely linked to social and environmental dimensions of sustainability, while
environmental management is clearly connected to the environmental dimension. Their focus is
typically on management practices of an individual company.
Spreading of quality management methods started from using statistical methods for quality control
for production8. Later on, a number of highly successful quality initiatives have been invented by the
Japanese (for example: Genichi Taguchi, QFD, Toyota Production System). Certification according to
6 Although Fair Trade is originally an agreement between the agricultural producer and the wholeseller, it is
typically utilised in order to improve the brand name and influence to consumers purchasing decisions and thus it can be considered also as B-to-C marketing concept. 7 According to Werbach: “People, who are part of the BLUE movement, aspire to make a difference through
the people and products that touch their lives. It encompasses green issues like protecting our last wild places and reducing our output of CO2, but it also includes personal concerns like saving money, losing weight, and spending time with friends and family.” 8 Quality management was first proposed in 1924, when Walter A. Shewhart made a major step in the
evolution towards by creating a method for quality control for production, using statistical methods. This became the foundation for his ongoing work on statistical quality control. During World War II Edwards Deming and Robert S. MacNamara among others applied statistical process control methods in the United States, thereby successfully improving quality in the manufacture of munitions and other strategically important products.
policies and guidelines, environmental auditing, life cycle assessment, the measurement of
environmental performance, and environmental reporting.
7.2 Maintenance during usage phase
Maintenance involves maintaining and securing the equipment and systems in, or restoring them to,
a state in which they can perform the required functions. The challenge for maintenance planning is
to identify appropriate objects and tasks for preventive maintenance and ensure that there are
adequate resources for the repair actions (Rosqvist et. al., 2009). In the literature, there are
presented several maintenance programme planning methodologies. In the following table
characteristics of standard Reliability Centered Maintenance (RCM), Business Centered
Maintenance, Waeyenberger & Pintelon approach and Value-Driven Maintenance methodologies
are presented.
Based on the information of the table (Table 5), it can be stated that the maintenance programme
planning methodologies do not directly handle sustainability issues. The RCM is a method for
establishing a preventive maintenance programme which will efficiently and effectively allow the
achievement of the required safety and availability levels of equipment and structures (IEC 60300-3-
11). Other three referenced maintenance planning methodologies are starting their objective setting
more from the strategic objectives of company that owns the manufacturing system. Therefore it
could be stated that if the manufacturing company has sustainability in its strategic agenda, it should
have an influence also to the objective setting and maintenance key performance indicators.
FP7-262931 SustainValue D3.2v1.0
Page 40 of 57
Table 5. Comparison of four maintenance program planning approaches (Rosqvist et al., 2009).
Maintenance planning approach
Basic steps Standard RCM Business-centred maintenance
Waeyenberger&Pintelon approach
Value-driven maintenance planning
What are the objectives?
Recognises the need to define the objectives of a maintenance programme. Gives a short generic listing of the objectives.
Corporate and production objectives steer the explicit formulation of a general maintenance objective for production units (equipment places).
Recognises different levels of objectives: asset management and maintenance objectives
Company, plant and maintenance objectives must be defined. Value tree representation.
How can we optimise what we are doing?
Appropriate information for setting a task frequency or interval is instructed to be obtained from one of more of the following: a) prior knowledge from other similar equipment b) manufacturer/supplier test data c) reliability data and predictions.
Maintenance workload is determined in co-operation with the production and the key to optimal maintenance is proper preventive maintenance scheduling. Means for this are presented. Preventive maintenance task selection at equipment level is not addressed.
Reference to literature on maintenance interval optimisation
Use of expert judgement based on experience feedback. Equipment location level. No synthesis of plant maintenance schedule.
What should be measured so that we know we are doing right?
Recognises the need to collect in-service failure history data. These data include failure times and dates, failure causes, maintenance times, etc., throughout the equipment operating life.
A broad range of measures related to maintenance productivity and effectiveness, and organisational efficiency
Reference to literature on performance measurement systems
Definition of Key Performance Indicators and Maintenance Performance Indicators. Expert panel to review reasons for possible deviations between goals and measured performance.
During recent years, the importance of the maintenance function has risen and there has been a lot
of discussion over the asset management aspects of the maintenance organisations. Asset
management aims to offer integrated and holistic view on planning, decision making and
implementation of activities concerning production assets including e.g. following elements
(Komonen et. al., 2012).
capacity
capabilities
overall equipment effectiveness
investments
FP7-262931 SustainValue D3.2v1.0
Page 41 of 57
maintenance
disposals
Economic analyses are very important in 'asset management'. The life cycle cost and profit
objectives and life cycle cost structure should have significant influence on the asset strategy and
strategic choices. Within the asset management framework a challenge to be met is how to sustain
or improve the life cycle profits of the original investment. Recently in asset management a business
oriented approach and sustainable asset solutions has been emphasized. Following three aspects are
emphasized and it is stated that (engineering) asset management is (Komonen et al., 2012)
maintenance and improvement of the profit-making capability of production assets
maintenance and optimization of the net asset value (physical assets), and
improvement of sustainability and safety of asset solutions
There are also other definitions for asset management. Mitchell (2002) says that 'asset management'
is ”a comprehensive, fully integrated, strategy, process, and culture directed at gaining greatest
lifetime effectiveness, value, profitability, and return from production and manufacturing equipment
assets”. In the publicly available specification PAS 55 asset management is defined as “the
systematic and coordinated activities and practices through which an organisation optimally
manages its assets and their associated performance, risks and expenditures over their life cycle for
the purpose of achieving its organisational strategic plan”.
Another approach of the most recent years, more technology driven, is referred under the name of
e-Maintenance. E-Maintenance is an emerging concept generally defined as “a maintenance
management concept whereby assets are monitored and managed over the Internet” (see Crespo &
Iung, 2006). Nevertheless, a lot of complementary definitions exist in which the principles of
collaboration, knowledge, intelligence are introduced. From a pragmatic point of view, and with the
aim of summarizing, we may say that e-Maintenance is “the set of maintenance processes that uses
the e-technologies to enable proactive decisions in a particular organization and in networks”
(definition partially derived from Levrat et al., 2008).
Levrat et al. (2008) envisioned the use of e-Maintenance as a concept, and a technology, not just for
improving proactive decisions in industrial plants, but also as relevant enabler to achieve sustainable
performances, especially for what concern environmental aspects (besides cost and efficiency).
Indeed, these authors state that “the paradigm of eco-efficiency is one of the main factors for
justifying a new way of thinking (e) -maintenance”. Nonetheless, this is more a vision for the next
future, rather than an existing fact. As a vision, then, it provides interesting open issues for research
advances, in the perspective fostered, for example, by Manufuture platform. Keeping in mind the
importance of the technology, as a lever for more sustainable manufacturing, Garetti and Taisch
(2011) underlines two special topics, attainable under the e-Maintenance vision, and relevant for re-
enforcing such approach: (i) the sustainable predictive maintenance of production equipment and
(ii) the mobile and remote maintenance.
Total Productive Maintenance (TPM) is a maintenance process developed for improving productivity
by making processes more reliable and less wasteful. The objective of TPM is to maintain the plant
or equipment in good condition without interfering with the daily process. To achieve this objective,
FP7-262931 SustainValue D3.2v1.0
Page 42 of 57
preventive and predictive maintenance is required. TPM has basically three goals - Zero Product
Defects, Zero Equipment Unplanned Failures and Zero Accidents (Venkatesh, 2007).
7.3 Performance management
In D 4.1 Performance Management is defined as the process of analysing performance-related
information (generated through performance measurement ), making decisions based on this
information, planning and implementing actions to improve or maintain the state of performance,
and feeding back information intended to improve the process of performance measurement.
Furthermore, in order to be able to generate the information that are necessary for informed
decision making, knowledge of influencing factors on performance as well as causal relations
between influencing factors and performance characteristics have to be known. Thus, organizational
performance is complex and can be affected by a host of different factors.
As pointed out in D4.1 in order to achieve consensus in the discussion of sustainability performance,
it is necessary to define the system boundaries the performance shall be based upon. In the context
of sustainability performance, three general approaches to system boundaries can be distinguished:
On the micro level, system boundaries would equal firm boundaries
On the macro level, life cycle can be considered the system boundary
On the meso level (between the micro and macro levels), the manufacturing network
consisting of several actors, e.g. customers, manufacturing companies, service providers and
suppliers, represents the system.
As already highlighted in the introduction, this report aims to consider sustainability requirement
management from both the meso and the macro levels. Targets must be in accordance with strategy
of actor (see Figure 14 in Chapter 9).
7.4 Remarks concerning usage phase
This chapter includes the summary of different practices regarding to management of usage and
their aspects regarding sustainability. These are connected to management of products end-of-life
presented in Chapter 8. All the approaches have some overlapping views to sustainability.
In the following table (Table 6) their main contribution, in what sense known management
methodologies of usage phase are supporting sustainable decision making, is evaluated.
FP7-262931 SustainValue D3.2v1.0
Page 43 of 57
Table 6. Comparison of requirements for usage phase (D3.1) and current methodologies.
Requirements defined in D3.1 QSHE Management Maintenance and Asset
management
Performance management
Requirements concerning consumption of energy, water, materials, air, land
X (X)
Requirements concerning emissions and waste
X (X)
Requirements concerning efficiency and intensity of usage, maintenance
X (X)
Requirement concerning the continuous improvement
X X (X)
Requirements concerning safety and health
X X (X)
FP7-262931 SustainValue D3.2v1.0
Page 44 of 57
8 End of life cycle management
This chapter considers the present methodologies regarding the end of life cycle management. Thus,
the concepts related to this phase (for instance 3R and 6R) emphasize the circular nature of life
cycles. In other words, through recycling, reuse or remanufacturing the end of life cycle of one
product may turn to the beginning of life cycle of another product.
8.1 Methodologies regarding end of life cycle
8.1.1 Reverse logistics
Reverse logistics stands for all operations related to the reuse of products and materials. It is "the
process of planning, implementing, and controlling the efficient, cost effective flow of raw materials,
in-process inventory, finished goods and related information from the point of consumption to the
point of origin for the purpose of recapturing value or proper disposal. More precisely, reverse
logistics is the process of moving goods from their typical final destination for the purpose of
capturing value, or proper disposal. Remanufacturing and refurbishing activities also may be
included in the definition of reverse logistics.” (Hawks, 2006)
8.1.2 From 3R’s to 6R’s
As illustrated in Figure 12 (in Chapter 5) the focus of green manufacturing was on 3R’s whereas later
on sustainable manufacturing highlights the approach of 6R’s.
The 3 R’s (Reduce, Reuse, Recycle) are described as starting point of sustainability implementation
programs. The principles are the following: 1) Reduction; purchasing and using only what is
necessary, 2) Reuse; find an alternative use extra materials and 3) Recycling; unused materials are
transformed into new products. The focus of 3R’s is clearly on environmental efficiency, although
implementation of main principles (3R’s) also can increase company’s profitability.
Later on, the 6R’s approach was introduced in order to have a broader and innovation-based
approach to product life cycle. Recover, Redesign and Remanufacture complemented the closed-
loop product life cycle system (see Figure 13).
FP7-262931 SustainValue D3.2v1.0
Page 45 of 57
Figure 13. Closed-loop product life cycle system in 6R approach (source: Jayal et al. (2010),
originally presented by Jaafar et al. (2007)).
8.2 Remarks concerning end of life cycle phase
This chapter includes a summary of practices regarding the management of the end of life phase and
their aspects regarding sustainability. These are closely connected to manufacturing engineering
approaches presented in Chapter 5 and to usage management considered in Chapter 7. All the
approaches have some views to sustainability.
First, reverse logistics focus on products end of life (post-use) phase as it defines the process of
moving goods from their typical final destination for the purpose of capturing value, or proper
disposal. On the other hand, both the 3R’s and 6R’s concepts have a broader view to sustainability,
while redesign, remanufacture, recover, reduce, reuse and recycle practices are gathered.
In the following table (Table 7) their main contribution, in what sense known end-of-life cycle
management methodologies are supporting sustainable decision making, is evaluated.
Table 7. Comparison of requirements for end-of- life cycle (D3.1) and current methodologies.
Requirements defined in D3.1 Reverse logistics 3R’s & 6R’s
Requirements concerning recyclability
and re-usage.
X X
FP7-262931 SustainValue D3.2v1.0
Page 46 of 57
Although, broader approaches (such as 3R& 6R) already exist, the network and strategic approaches
within them are still missing. In other words, although the concepts highlight the cyclic nature of
product life cycles they do not consider, how this could be realized at the network level or what
could be the new business opportunities related to these new operations regarding to recycling,
reusing, remanufacturing etc.
FP7-262931 SustainValue D3.2v1.0
Page 47 of 57
9 Gap analysis of existing development methodologies considering
sustainability
The previous chapters considered several methodologies related to industrial management in order
to collect information on how they could support innovation management and solution engineering
towards sustainable solutions within manufacturing networks. As pointed out several times these
management paradigms have overlapping concepts and are all the time evolving together. Although
there is a consensus on the importance of networks, most of the management methods still focus on
individual organisations.
This chapter first summarizes the identified gaps of existing methodologies and secondly presents: i)
how strategic approach to sustainability is required and ii) how the network governance model,
presented in the D1.2, could support sustainable development at the network level.
9.1 Summary of gap analysis
The requirements defined in the D3.1 formed the baseline for this report (summarized in Tables 2
and 4 in D3.1). The broad literature review of D3.1 emphasized that plenty of different requirements
could be identified. The spectrum of requirements is very broad so that consciously no detailed
structure of these requirements was introduced in D3.1.
In this report the requirements regarding each life cycle phase (summary in Table 2 on p. 22 in D3.1.)
were explored in chapters 4-8. As already pointed out in the introduction the aim was to form a
checklist of different methods and principles behind them. Still, the requirements concerning the
development process of sustainable solution were considered in more detail in Chapter 4 of this
report (design, planning and development phase).
Gaps of current methodologies are analysed based on tables (1 - 7) as follows:
methodologies in business strategy and innovation management; there are only few tools
that clearly link sustainable development to strategic decisions and innovations, e.g. how
sustainability can offer competitive advantage, differentiation and new business
opportunities
methodologies in design, planning and development; the existing tools focus typically on
how to ensure that strategic targets are considered during the new product (or service)
development work, rather than setting the strategy
methodologies in manufacturing systems development; the current approaches do not
cover network and life cycle aspects, although holistic thinking and integrated approaches
are required
methodologies in distribution, logistics and services; similarly to manufacturing approaches
the focus has been on individual company, while service thinking highlights that
collaboration with customers should be covered
FP7-262931 SustainValue D3.2v1.0
Page 48 of 57
methodologies in operation and maintenance phase; modern versions of management
methodologies within operation and maintenance phase include also sustainability aspects,
but once again the focus is on individual company
methodologies in end- of- life cycle; broader approaches (3R& 6R) already exist, still network
and strategic approaches within them are missing
The summary and gap analyses illustrate that several methods of innovation management and
solution engineering already exist, and they can be utilised also to sustainable development within
some dimensions. Still, holistic approaches for strategic thinking are required. The companies cannot
reach the sustainability targets alone. The new methods should support actors defining what
sustainability means within their industry and to business (models) of all involved actors.
Furthermore, companies should be able to position themselves within the value network in order to
recognize, how they can influence to other actors and drive the network-level change towards
sustainability. Thus, the present methods may support the requirement management also at the
network level, if the system boundaries are defined transparently and the strategic targets are
agreed on the network level.
9.2 Strategic approach to sustainability
As pointed out already in the introduction (see especially Figure 2) in the present networked
business environment the challenge to manage sustainability requirements is a complex challenge.
When exploring life cycle of manufacturer’s single solution, several life cycles of different solutions
could be identified that are influencing its sustainability. The gap analysis highlights that it is crucial
to integrate sustainability into companies’ as well as networks’ core strategies. Importance of
strategic connection is highlighted also by other authors, for instance Maxwell and van der Vorst
(2003). Still, the strategic connection is typically considered at the level of an individual company.
The network level strategic approach to sustainability is needed, while the key challenge is to
identify what are the company- as well as network-specific sustainability recipes and how to guide
the whole network towards sustainable development.
In the present networked economy the companies cannot reach sustainability objectives alone (See
figure 2 for reasoning). Thereby, it is important to consider sustainability at network level over
product life cycle. Figure 14 illustrates the importance of strategic approach and the connection
between main levels of sustainable co-development in broader context. In other words,
development can and should appear in any life cycle phase, although the method and tool
development work in WP3 focuses on development process of sustainable solutions.
FP7-262931 SustainValue D3.2v1.0
Page 49 of 57
Strategy of the sustainable
manufacturingnetwork
Shared objectivesand performanceindicators of the
network
Objectives of the network partner
Setting the objectives
Setting the objectives
Feedback information
Feedback information
Figure 14. Strategic approach to sustainable co-development.
First, the strategic importance of sustainability should be discussed at the manufacturing network
level. Secondly, based on network level strategy the shared objectives and performance indicators
should be set. Thirdly, the objectives of the network partners should be aligned with network level
objectives and furthermore also the feedback loops between the levels are important.
Furthermore, the work in WP4 provides more detailed framework for multi-objective performance
management. The performance framework developed and presented in D4.1 consists of three
interlinked principal components: network condit ions , structural e lements , and tr iple
bottom l ine assessment . The reason for this separation rests on the inherent challenges of
measuring and managing the various key issues, including intangibles, in complex environments.
Thus, the identified components have a clear link to strategic level approach presented in the above
figure (Figure 14). First, the network conditions go beyond strategy of sustainable manufacturing
network. Secondly, the shared objectives of sustainable manufacturing network are naturally based
on triple bottom line. And finally, the structural elements cover the most significant internal factors
impacting on sustainability performance, and they can be perceived in the objectives of network
actors.
9.3 Sustainable development at network level
D1.2 presented the SustainValue network governance model. It illustrates the sustainability
governance within a manufacturing network as a process to guide the activities of all involved actors
towards sustainable development and performance over product life cycle (Figure 15, originally
presented in D1.2 p. 43).
As pointed out in D1.2 the SustainValue governance model illustrates a process, which integrates i)
requirements and commitment of stakeholders within business ecosystem as well as ii) business
models and self-interest of manufacturing network companies. Thus, further development of this
governance model is required in order to consider the requirements identified in WP3, e.g. the
requirements for sustainable solution and its development process.
FP7-262931 SustainValue D3.2v1.0
Page 50 of 57
Figure 15. SustainValue governance model (adapted from D1.2).
There are three main tasks of sustainability governance; analysing, organising and developing (Figure
15). These three network level tasks are overlapping with company-level development.
FP7-262931 SustainValue D3.2v1.0
Page 51 of 57
10 Summary
Existing methodologies for innovation and solution engineering were collected and checked against
the requirements developed in task 3.1. The result of this step is an overview on which part of which
existing methodology achieves which requirements. This overview is a basis for the creation of the
new development methodology. Thus, the report aims to form a managerial checklist of the current
methods utilised through the product life cycle.
SustainValue work packages 1 – 4 have identified and discussed different areas from which
sustainability impacts and business opportunities emerge:
Work package 1 discusses sustainability gaps and stakeholder requirements, sustainability
governance in manufacturing networks, and a reference business model architecture for
sustainable manufacturing
Work package 2 analyses and discusses the creation of sustainable business models and
networks
Work package 3 discusses sustainable development in the manufacturing network through
product life cycle with a special focus on development of sustainable solutions
Work package 4 aims to develop a governing framework for sustainability including
sustainability guidelines, performance metrics and definition of a verification process
Between the work packages there are several interdependencies and during the further work the
strategic and operative development methods will be structured in a more detailed manner.
Existing methodologies could be used in order to support innovation management and solution
engineering within manufacturing industry – also from the sustainability perspective. All the
presented methodologies are considering at least some of elements of sustainable development
(see Tables 1 - 7). Based on the gap analyses, we summarize that the present methods: i) focus on an
individual company rather than a network and ii) consider operational issues more than strategic
thinking.
According to the gap analysis presented in chapter 9, system boundaries must be broadened from
an individual company to a value network level – and even to business ecosystem including also
other stakeholders. The new methods should support actors defining what sustainability means to
their solutions within their industry and to business (models) of all involved actors – both at value
network and ecosystem level.
The present methodologies support sustainable development at operational level, but the
descriptions on how to set strategic objectives are partly missing. In other words, baseline for
sustainable development should be the understanding that at what level the strategic choices
towards sustainability should be defined. This requires multilevel approach to sustainability, in order
to understand the self-interests of involved actors and ensure their commitment. Thus, some of the
present methods support the requirement management also at the network level, if the system
boundaries are defined transparently and the strategic targets are agreed on at the network level.
FP7-262931 SustainValue D3.2v1.0
Page 52 of 57
The further development of tools and methods to be conducted in SustainValue WP3 aims to
support the leap into sustainability by having as wide a perspective as it is resource wise possible to
have. In any case the focus of the work will be in the development process of sustainable solutions.
This process will cover the aspects concerning all the life cycle phases of the solution and consider
the required feedback loops between the life cycle phases.
FP7-262931 SustainValue D3.2v1.0
Page 53 of 57
References
Ahlqvist, T., Bäck, A., Heinonen, S. & Halonen, M. (2010). Road-mapping the societal transformation
potential of social media, Foresight, Vol. 12, No. 5, pp. 3–26.
Allee, V. (2000). Reconfiguring the Value Network, Journal of Business Strategy, vol. 21, no. 4, (July-Aug). Apilo, T. (2010). A model for corporate renewal. Requirements for innovation management. VTT
Publications 750. VTT Espoo.
Aronsson, H. & Brodin, M. (2006). The environmental impact of changing logistics structures,
International Journal of Logistics Management, Vol. 17 No. 3, pp. 394-415.
Aurich J., Schweitzer, E., Siener, M., Fuchs, C., Tenne, F. & Kirsten, U. (2007). Life Cycle Management
investiver PSS: Gestaltung und Realisierung investiver Produkt-Service Systeme, Werkstatttechnik
online 97(7/9), pp. 579-585.
Boer, H. & During, W. (2001). Innovation, what innovation? A comparison between product, process
and organizational innovation. International Journal of technology Management, Vol. 22, No. 1/2/3,
pp. 83–107.
Bonini, S. (2011). The business of sustainability, McKinsey Global Survey results.
Bullinger, H.-J & Scheer, A.-W. (2006). Service Engineering: Entwicklung und Gestaltung innovativer
Dienstleistungen. 2nd ed., Springer, Berlin, pp. 3-18.
Bullinger, H.‐J. & Schreiner, P. (2002). Ein Rahmenkonzept für die systematische Entwicklung von
Dienstleistungen. In H.-J. Bullinger & A.‐W. Scheer(Eds.), Service Engineering. Entwicklung und
Modeling and optimization challenges at the product, process and system levels, CIRP Journal of
Manufacturing Science and Technology, Volume 2, Issue 3, 2010, pp. 144-152.
Kim, W.C. & Mauborgne, R. (2005). Blue Ocean Strategy – How to Create Uncontested Market Space
and Make the Competition Irrelevant. Boston: Harward Business School Press.
Koen, P.A., Ajamian, G.M., Boyce, S., Clamen, A., Fisher, E., Fountoulakis, S., Johnson, A., Puri, P. &
Seibert, R. (2002). Fuzzy Front End: Effective Methods, Tools, and Techniques. In Belliveau, P.,
Griffin, A. & Somermeyer, S. (eds.). The PDMA Toolbook 1 for New Product Development. New York:
Wiley. pp. 5–35.
Komonen, K., Kortelainen, H. & Räikkönen, M. (2012). Corporate Asset Management for Industrial
Companies: An Integrated Business-Driven Approach. In Van der Lei, T., Herder P. & Wijnia, Y. (Eds.).
Asset Management. The State of the Art in Europe from a Life Cycle Perspective. Springer Science;
Business Media B.V., ss. 47 – 63. doi: 10.1007/978-94-007-2724-3.
Levrat, E., Iung, B. & Crespo Marquez, A. (2008), E-maintenance: review and conceptual framework,
Production Planning & Control, Vol. 19:4, pp. 408-429.
López Campos, M.A., Fumagalli, L., Gómez Fernández, J.F., Crespo Márquez, A. & Macchi, M. (2010).
UML model for integration between RCM and CBM in an e-Maintenance architecture, in Preprints of
1st IFAC Workshop, A-MEST'10, Advanced Maintenance Engineering, Services and Technology,
Lisboa, Portugal, 1-2 July 2010.
Manzini, K. & Vezzoli,C. (2002). Product--‐Service--‐Systems and Sustainability, Opportunities for Sustainable Solutions (Paris: Politeenico di Milano/uNEP).
Maxwell, D. & van der Vorst, R. (2003). Developing sustainable products and services, Journal of
Cleaner Production, Volume 11, Issue 8, pp. 883-895.
Mitchell J. S. (2002). Physical Asset Management Handbook. 3. Edition. Clarion Technical Publishers.
291 p.
Muller, Alexandre, Crespo Marquez, A. & Iung, B. (2008). On the concept of e-maintenance: Review
and current research. Reliability Engineering and System Safety, pp. 1165–1187.
Nidumolu, R. Prahaland, C.K. & Rangaswami, M.R. (2009). Why Sustainability Is Now the Key Driver
of Innovation. Harvard Business Review, September 2009.
Osterwalder, A., Pigneur, Y. & Tucci C. L. (2005). Clarifying business models: origins, present, and
future of the concept, Communications of AIS, Vol. 15. Article 1.
Paasi, J. & Valkokari, P. (2010) (Eds). Elucidating the fuzzy front end - Experiences from the INNORISK project, VTT Publications 743.Espoo.
FP7-262931 SustainValue D3.2v1.0
Page 56 of 57
Paasi, J., Valkokari, P., Maijala, P., Luoma, T & Toivonen, S. (2007). Managing Uncertainty in the Front
End of Radical Innovation Development, In: Proc. 16th International Conference for the International
Association of Management Technology, IAMOT 2007. pp.1306-1324. ISBN 0-9712964-9-9.
Pahl, G., Beitz, W., Schulz, H., & Jarecki, U. (2003). Konstruktionslehre: Methoden und Anwendung
(5th ed.). Berlin: Springer.
PAS 55-1:2008 (2008). Asset Management Part 1: Specification for the optimized management of
physical assets. BSI. UK.
Patterson, M.L. (2005). New product portfolio planning and management, in Kahn, K.B. (ed.) The
PDMA Handbook of New Product Development (2nd ed.). Hoboken, New Jersey, John Wiley & Sons
Inc., pp.46-58.
Phaal, R., Farrukh C.J.P. & Probert, D.P. (2004.) Technology Roadmapping – A Planning Framework
for Evolution and Revolution. Technological Forecasting & Social Change 71. pp. 5–26.
Porter, M. E. (1986). Changing Patterns of International Competition. California Management Review, Vol. 28(2), pp. 9–40. Prahalad, C. K., & Hamel, G. (1990). The Core Competence of the Corporation. Harvard Business Review, (May-June), pp. 79–90. Provan, K. G., Fish, A., & Sydow, J. (2007). Interorganizational Networks at the Network Level: A Review of the Empirical Literature on Whole Networks. Journal of Management, 33(3), 479–516. doi:10.1177/0149206307302554 Rosqvist, T. Laakso, K. & Reunanen, M. (2009). Value-driven maintenance planning for a production
plant. Reliability Engineering & System Safety, Vol. 94 (2009) No:1, pp. 97 – 110.
Shehabuddeen, N., Probert, D., Phaal, R., & Platts, K. (1999). Representing and Approaching Complex
Management Issues: Part 1 - Role and Definition (Centre for Technology Management Working
Paper Series). Cambridge.
Shi, Y. & Gregory, M. (1998). International Manufacturing Networks - to develop global competitive
capabilities, Journal of Operation Management, vol. 16, pp. 195-214.
Strong, R., Ryan, J., McDavid, D., Leung, Y., Zhou, R., Strauss, E., Bosma, J., Sabbadini, T., Jarvis, D.,
Sachs, S., Bishop, P. & Clark, C. (2007). A New Way to Plan for the Future, Proceedings of the 40th
Hawaii International Conference on System Sciences.
Terzi, S., Bouras, A., Dutta, D., Garetti, M. & Kiritsis, D. (2010). Product lifecycle management – from
its history to its new role. International Journal of Product Lifecycle Management, Vol. 4, 4, pp. 360-
389.
Tidd, J., Bessant, B. & Pavitt, K. (2005). Managing innovation: Integrating technological, market and
Tukker, A. & Tischner, U. (2006). New Business for Old Europe Product-Service Development,
Competitiveness and Sustainability, Greenleaf Publishing, Sheffield.
Tuli, K.R., Kohli, A.K. & Bharadwaj, S.G. (2007). Rethinking customer solutions: from product bundles
to relational processes, Journal of Marketing, Vol. 71 No.3, pp.1-17.
Ullrich, K. & Eppinger, S. (2004). Product Design and Development (3rd ed.). New York: McGraw-Hill.
Vargo, S.L. & Lusch, R.F. (2004). Evolving to a new dominant logic for marketing. Journal of
Marketing, Vol. 68, No. 1, pp. 1–17.
VDI guideline 2221 (1993). Systematic approach to the development and design of technical systems
and products.
Venkatesh, J. (2007). An Introduction to Total Productive Maintenance (TPM). Plant Maintenance
Resource Center. Available at http://www.plant-maintenance.com/articles/tpm_intro.shtml.
Versteeg, G. & Bouwman, H (2006). Business architecture: A new paradigm to relate business strategy to ICT’, Information Systems Frontiers, vol. 8, no. 82, pp. 91-102.
Werbach, A. (2008). Birth of Blue. Speech published by Saatchi & Saatchi.
White Paper of Service Science (2007). Succeeding Through Service Innovation: A Discussion Paper,
University of Cambridge, Cambridge, [available at: http://www.ifm.eng.cam.ac.uk/ssme/documents/080428cambridge_ssme_whitepaper.pdf]
Wolfenden, P.J. & Welch, D.E. (2000). Business Architecture: A Holistic Approach to Defining the Organization Necessary to Deliver a Strategy, Knowledge and Process Management, vol. 7, no. 2, pp. 97-106.
Deliverables of SustainValue project
D1.1: Sustainability gaps and stakeholder requirements
D1.2: Towards sustainability governance in manufacturing networks
D1.3: A reference business model architecture for sustainable manufacturing products, services and
processes
D2.1: State-of-practice in business modelling and value-networks, emphasising potential future
models that could deliver sustainable value
D2.2: Report on gap analysis in business modelling and value-network tools and methods against
future needs
D2.3: Proposed design of new methods & tools, within the overall architecture
D3.1: Definition of requirements of the new solutions development methodology