CX-UA Series Optimization and Compression for Improved Backhaul Efficiency Extend network capacity for new services. Increase revenue by expanding the capacity of existing networks without forklift upgrades. Extend coverage area of new services leveraging legacy transmission infrastructure. Reduce cost of broadband access services and IP-RAN technologies. Maximize ROI time frames – often measured in just months. STRATEGIC AND TACTICAL UTILIZATION OF OPTIMIZATION AND AGGREGATION TECHNOLOGIES ACROSS 2G CIRCUIT-BASED NETWORK POINTS ALWAYS ENSURES A CONTROLLED AND EFFICIENT TRANSITION TO 3G. THIS SOLUTION ALSO MAXIMIZES PRECIOUS CAPEX BUDGETS WHILE SAFE-GUARDING EXISTING REVENUE STREAMS. Memotec’s CX-UA Series is a modular cellular backhaul platform delivering 2G/3G Radio Access Network (RAN) aggregation and traffic optimization. Deployed at the MSC/BSC/RNC hub locations and aggregation points across the RAN, the CX-UA Series enables mobile operators to optimize and aggregate traffic, and free up capacity to allow for quick deployment of new services over their existing network, without costly upgrades, and at a lower cost. Comprised of 3 products, the CX-UA Series includes: CX-UA 1100 Access Gateway: supports 24 x E1 and 6 Ethernet ports in a compact 1U format. CX-UA 2000 Aggregation Node: supports up to 48 x E1, 8 or 20 Ethernet ports and 2 STM-1 interface in a modular 2U chassis, with a processing capacity of up to 126 E1s. Microwave, or Fiber PDH/SDH Access Network CX-UA CX-UA CX-UA CELL SITE RAN CENTRAL OFFICE BSC GSM 1800 BSC CDMA RNC BSC GSM 900 CDMA GSM 900 GSM 1800 Node B STM-1 E1 or SMT-1 STM-1 E1 or STM-1 E1 or STM-1 E1 ATM Switching and Abis Payload Optimization CX-UA 9000 Hub Node: supports up to 256 x E1, 6 x STM-1, 4 x STM-4 and up to 38 x GE interfaces in a carrier grade 12U modular chassis, with a processing capacity of up to 1,008 E1s. Memotec’s CX-UA Series can optimize and aggregate traffic from every 2G/3G GSM/CDMA network interface available today: 2G CDMA 2G GSM (Abis/Ater optimization) 2G GSM (DCME at the A/E interfaces) 3G UMTS/CDMA (ATM cell aggregation) 3G IP-RAN / WIMAX (VLAN spanning) Traffic can be aggregated and pushed to the most efficient bearer link available, be it E1 (supporting ATM-IMA or MLPPP), Synchronous Ethernet (for migration to IP-RAN) or STM-1/STM-4. A FLEXIBLE MIGRATION PATH Today, the CX-UA series provides the means to ag- gregate 2G/3G traffic over existing SDH/PDH infra- structure, The same CX-UA equipment also provides the means to smoothly and seamlessly migrate 2G or 3G traffic over an IP/Ethernet transmission infrastructure, merging it with IP-RAN. With support for IP/MPLS protocols, Carrier Ethernet interfaces as well as E1 and STM-1/STM-4 connectivity, the CX-UA is an investment which will provide benefits for the life of the deploy- ment. 3G
2
Embed
CX-UA Datasheet GenY v7 - Memotecmemotec.com/wp-content/uploads/2014/05/CX-UA_Datasheet.pdf · backhaul platform delivering 2G/3G Radio Access ... Node B STM-1 E1 or SMT-1 E1 ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CX-UA Series Optimization and Compression for Improved Backhaul Effi ciency
STRATEGIC AND TACTICAL UTILIzATION OF OPTIMIzATION AND AGGREGATION TECHNOLOGIES ACROSS 2G CIRCUIT-BASED NETWORK POINTS ALWAYS ENSURES A CONTROLLED AND EFFICIENT TRANSITION TO 3G. THIS SOLUTION ALSO MAXIMIzES PRECIOUS CAPEX BUDGETS WHILE SAFE-GUARDING EXISTING REvENUE STREAMS.
Memotec’s CX-UA Series is a modular cellularbackhaul platform delivering 2G/3G Radio AccessNetwork(RAN)aggregationandtrafficoptimization.
Deployed at the MSC/BSC/RNC hub locationsand aggregation points across the RAN, theCX-UA Series enables mobile operators to optimizeand aggregate traffic, and free up capacity toallowforquickdeploymentofnewservicesover theirexisting network, without costly upgrades, and at alowercost.
Comprised of 3 products, the CX-UA Series includes:
CX-UA9000HubNode:supportsupto256xE1,6xSTM-1,4xSTM-4andupto38xGEinterfacesin a carrier grade 12U modular chassis, with aprocessingcapacityofupto1,008E1s.
Traffic can be aggregated and pushed to the mostefficient bearer link available, be it E1 (supportingATM-IMA or MLPPP), Synchronous Ethernet (formigrationtoIP-RAN)orSTM-1/STM-4.
A fLEXIBLE MIGRATIOn PATH
Today, the CX-UA seriesprovides the means to ag-gregate 2G/3G traffic overexisting SDH/PDH infra-structure,ThesameCX-UAequipment also providesthe means to smoothlyand seamlessly migrate2G or 3G traffic over anIP/Ethernet transmissioninfrastructure, merging itwithIP-RAN.
With support for IP/MPLSprotocols, Carrier EthernetinterfacesaswellasE1andSTM-1/STM-4 connectivity,theCX-UAisaninvestmentwhich will provide benefitsfor the life of the deploy-ment.
* E1 interfaces may be used as either trunk, connecting to NodeB, CDMA or GSM BTS, or bearer, connecting to the RAN transmission network. Synchronous Ethernet interfaces are available to support IP RAN or IP/Ethernet based transmission equipment. STM-1/STM-4 optical/electrical interfaces are available in lieu of E1s if the E1 ports are already aggregated via ADM (freeing up E1 port capacity for trunk or bearer support).