CV - The Laboratory of Micromechanics of Materials · Web view[17] J. Milhans, D. S. Li, M. Khaleel, X. Sun, and H. Garmestani, "Prediction of the effective coefficient of thermal

HAMID GARMESTANISchool of Materials Science and Engineering

Georgia Institute of TechnologyAtlanta, GA  30332-0245

404 385 [email protected]

PROFESSIONAL EDUCATION: University of Florida Mechanical Engineering B.S. 1977-1981University of Florida, Materials Science and Engineering MS. 1984

Minor: Engineering Sciences and Mechanics.Advisor: Professor E. W. Hart

Cornell University Theoretical and Applied Mechanics, Ph.D.1989. Minor: Materials Science and Engineering.

Advisor: Professor E. W. Hart

EMPLOYMENT:2003-present Professor Georgia Institute of Technology2000-2002 Professor Florida State University1995-2000 Associate Professor Florida State University1990-1994 Assistant Professor: Florida State University1988-1989 Associate Research Scientist Yale University

RESEARCH INTEREST:Prof. Hamid Garmestani, faculty since 1991, is a Professor of Materials Science and Engineering at Georgia Institute of Technology.   Dr. Garmestani is well known for Microstructure Sensitive Design (MSD) framework that addresses an inverse methodology and innovations in various aspects of processing, structure-property relationships, and simulation-based design of materials. He has contributed years of work to statistical continuum mechanics for homogenization in composites and polycrystalline materials. He has published more than 250 papers (165 Journal papers) with more than 2610 citations with an H factor of 22. Through this work he has been able to contribute and significantly affect some cutting edge areas of research and development. His research in Microstructure Design of Ultra High Molecular Weight Polyethylene resulted in microstructures with significantly higher wear resistant properties for bio-implant (Knee and Hip) applications. This was achieved using a computational materials framework that can explore the optimum processing path conditions (heat treatment and warm rolling to produce highly deformed microstructures for extended plasticity. He has recently been involved in Microstructure design of porous ceramic cathode materials resulted in the development and synthesis of porous gradient LSMO cathode microstructures for Solid Oxide Fuel Cell (SOFC). The theoretical modeling using statistical approaches provided a framework to identify the gradient and the required porosity in the ceramic structures. He and his team have also developed a synthesis methodology based on spray pyrolysis to fabricate the optimum gradient microstructure. His efforts in the microstructure design and processing of Carbon Based nano-tube composites has just resulted in a microstructure with superior mechanical properties (patent pending). Earlier in 2001, he has developed techniques in magnetic processing of

Carbon Based Nano-tube composites using Shear Drag in the polymer matrix to produce highly oriented nano-tube composites using high magnetic field.

Dr. Garmestani has been heavily involved in leadership roles in both the American Society of Mechanical Engineers Materials Division (Associate editor of ASME JEMT). He is a member of the texture, forming and composite committees of ASM and TMS. Dr. Garmestani has organized more than 26 workshops and symposia in the emerging subject of materials design (average of 3 in the last four years), He was awarded “Superstar in Research” by FSU-CRC in year 2000. He was also the recipient of the 2000 Engineering Research Award of the FAMU-FSU College of Engineering and recipient of the Faculty Award for Research from NASA. He is presently funded through DOE, Pacific Northwest National lab, and the NSF. Dr. Garmestani is a member of the editorial board of the Journal Engineering Materials and Technology, International Journal of Plasticity, Journal of Mechanics of Materials, Computers, Materials and Continua and Theoretical and Applied Multi-scale Modeling of Materials.

PUBLICATIONS: Submitted (in review):

(Submitted, Accepted)[1] D. S. Li, Z. Y. Liu, H. Garmestani, and M. Al-Haik, "Fabrication of Unidirectional All

Cellulose Nanowhisker Composite. Polymer Bulletin," Submitted.[2] Z. Razavi Hesabi, S. Kamrani, J. Gracio, S. Ahzi, and H. Garmesatni,

"Contribution of sdifferent trengthening mechanisms in metal matrix nanocomposites," Acta Materialia., submitted.

[3] Z. Razavi Hesabi, K. Dahmen, H. Garmestani, and E. Olson, "Synthesis of carbon nanobelt with self-assembly properties under magnetic field," submitted.

[4] Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed, "Self-standing crystalline TiO2 nanotubes/CNTs heterojunction membrane: Synthesis and characterization," Applied Materials and Interfaces,, Submitted.

[5] Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed, "Enhanced photoassisted water splitting using crystalline Ti mixed oxide nanotubes /CNTs hetro nanostrutures," Submitted.

[6] P. Pooyan, R. Tannenbaum, and H. Garmestani, "Mechanical Behavior of an Electrospun Cellulose-Reinforced Scaffold in Cardiovascular Tissue Engineering," Journal of the Mechanical Behavior of Biomedical Materials, submitted.

[7] P. Pooyan, I. T. Kim, R. Tannenbaum, and G. H., "Cellulose-based Nanocomposite as a Potential Scaffold in Cardiovascular Tissue Engineering," Submitted.

[8] H. A. Hamedani, N. K. Allam, H. Garmestani, and M. A. El-Sayed, "Sr-Doped TiO2 Nanotube Arrays: Synthesis, Characterization, and Enhanced Photoelectrochemical Water Oxidation Characteristics," Journal of the Physical Chemistry C, Submitted.

[9] N. M. Hamdan, M. El-Elkawni, B. Z. Cui, and H. Garmestani, "Effect of High Magnetic Field Annealing on Nd2.4Pr5.6Dy1Fe84Mo1B6 Nanocomposites: a

Circular Magnetic Dichrosim Study," journal of Mechanics of Advanced Materials & Structures, Submitted.

(2012)[10] Z. R. Hesabi, K. A. Nageh, D. Klaus, H. Garmestani, and M. A. El-Sayed, "Self-

Standing Crystalline TiO2 Nanotubes/CNTs Heterojunction Membrane: Synthesis and Characterization," Applied Materials and Interfaces, 2012.

[11] M. Baniassadi, B. Mortazavi, H. A. Hamedani, H. Garmestani, S. Ahzi, M. Fathi-Torbaghan, D. Ruch, and M. Khaleel, "Three-dimensional reconstruction and homogenization of heterogeneous materials using statistical correlation functions and FEM," Computational Materials Science, vol. 51, pp. 372-379, Jan 2012.

[12] M. Baniassadi, A. Ghazavizadeh, Y. Remond, S. Ahzi, D. Ruch, and H. Garmestani, "Qualitative Equivalence Between Electrical Percolation Threshold and Effective Thermal Conductivity in Polymer/Carbon Nanocomposites," Journal of Engineering Materials and Technology, vol. 134, pp. 010902-5, 2012.

[13] M. Baniassadi, S. Ahzi, H. Garmestani, D. Ruch, and Y. Remond, "New approximate solution for N-point correlation functions for heterogeneous materials," Journal of the Mechanics and Physics of Solids, vol. 60, pp. 104-119, Jan 2012.

[14] M. Baniassadi, Mortazavi, B., Amani-Hamedani, H., Garmestani.H., Ahzi, S., Fathi, M., Ruch,D., Khaleel, M., "Three- dimensional reconstruction and homogenization of heterogeneous materials using statistical Correlation function," Computational Materials Science, vol. 51, pp. 372-379, 2012 2012.

[15] M. Baniasadi, A. Ghazavizadeh, Y. Rémond, A. Ahzi, D. Ruch, and H. Garmestani, "Qualitative Equivalence Between Electrical Percolation Threshold and Effective Thermal Conductivity in Polymer/Carbon Nanocomposites," J. Eng. Mater. Technol., vol. 134, 2012.

(2011)[16] W. Miranda, G. Takiguchi, T. Shimabukuro, L. McLennan, C. Agajanian, L.

Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E. Fodran, E. W. Lee, H. Garmestani, R. D. Conner, D. Brick, J. Ogren, and O. S. Es-Said, "Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing," Journal of Materials Engineering and Performance, vol. 20, pp. 1206–121, 2011.

[17] J. Milhans, D. S. Li, M. Khaleel, X. Sun, and H. Garmestani, "Prediction of the effective coefficient of thermal expansion of heterogeneous media using two-point correlation functions," Journal of Power Sources, vol. 196, pp. 3846-3850, Apr 2011.

[18] J. Milhans, D. S. Li, M. Khaleel, X. Sun, M. Al-Haik, A. Harris, and H. Garmestani, "Mechanical properties of solid oxide fuel cell glass-ceramic seal at high temperatures," Journal of Power Sources, vol. 196, pp. 5599–5603, 2011.

[19] D. S. Li, H. Zbib, H. Garmestani, X. Sun, and M. Khaleel, "Modeling of irradiation hardening of polycrystalline materials," Computational Materials Science, vol. 50, pp. 2496–2501, 2011.

[20] Z. R. Hesabi, N. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed, "Enhanced Photo-Assisted Water Splitting Using Titanium-Niobium Mixed Oxide

Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting & Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA," 2011.

[21] H. A. Hamedani, B. M., M. Khaleel, S. Ahzi, D. Ruch, and H. Garmestani, "Microstructure, Property and Processing Relation in Gradient porous Cathode of Solid Oxide Fuel Cells Using Statistical Continuum Mechanics," Journal of Power Sources vol. 196, pp. 6325-6331, 2011.

[22] H. A. Hamedani, N. K. Allam, H. Garmestani, and M. A. El-Sayed, "Electrochemical Fabrication of Strontium-Doped TiONanotube Array Electrodes and Investigation of Their Photoelectrochemical Properties," J. Physical Chemistry, C, 2011.

[23] A. Ghazavizadeh, M. Baniassadi, M. Safdari, A. A. Atai, S. Ahzi, S. A. Patlazhan, J. Gracio, and D. Ruch, "Evaluating the Effect of Mechanical Loading on the Electrical Percolation Threshold of Carbon Nanotube Reinforced Polymers: A 3D Monte-Carlo Study," Journal of Computational and Theoretical Nanoscience, vol. 8, pp. 2087-2099, 2011.

[24] J. Bouhattate, D. S. Li, G. A. C. Branco, C. M. B. Bacaltchuk, and H. Garmestani, "Texture Prediction of Cold- and Hot-Rolled Titanium Using Processing Path Model," Journal of Materials Engineering and Performance, vol. 20, pp. 177-184, Mar 2011.

[25] L. Baniassadi M, A., Makradi,A., Belouettar,S., Ruch,D., Muller,R., Garmestani,H., Toniazzo,V., Ahzi,S.,, "Statistical Continuum Theory for the Effective Conductivity of Carbon nanotubes Filled Polymer Composites," Thermochimica Acta, vol. 520, pp. 33-37, 2011.

[26] M. Baniassadi, M. Safdari, A. Ghazavizadeh, B. Mortazavi, H. Garmestani, S. Ahzi, J. Grácio, and D. Ruch, "Incorporation of Electron Tunneling Phenomenon into 3D Monte Carlo Simulation of Electrical Percolation in Graphite Nanoplatelet Composites," Journal of Physics D: Applied Physics, vol. 44, pp. 1-8, 2011.

[27] M. Baniassadi, A. Laachachi, F. Hassouna, F. Addiego, R. Muller, H. Garmestani, S. Ahzi, V. Toniazzo, and D. Ruch, "Mechanical and thermal behavior of nanoclay based polymer nanocomposites using statistical homogenization approach," Composites Science and Technology, vol. 71, pp. 1930-1935, Nov 14 2011.

[28] M. Baniassadi, H. Garmestani, D. S. Li, S. Ahzi, M. Khaleel, and X. Sun, "Three-phase solid oxide fuel cell anode microstructure realization using two-point correlation functions," Acta Materialia, vol. 59, pp. 30-43, Jan 2011.

[29] M. Baniassadi, F. Addiego, A. Laachachi, S. Ahzi, H. Garmestani, F. Hassouna, A. Makradi, V. Toniazzo, and D. Ruch, "Using SAXS approach to estimate thermal conductivity of polystyrene/zirconia nanocomposite by exploiting strong contrast technique," Acta Materialia, vol. In Press, Corrected Proof, 2011.

(2010)[30] M. Safdari, M. Baniassadi, S. Asiaei, H. Garmestani, and S. Ahzi, "Modeling of

Biologically Inspired Adhesive Pads Using Monte Carlo Analysis," Journal of Adhesion Science and Technology, vol. 24, pp. 1207-1220, 2010.

[31] J. Milhans, D. Li, M. Khaleel, X. Sun, and H. Garmestani, "Statistical continuum mechanics analysis of effective elastic properties in solid oxide fuel cell glass-ceramic seal material," Journal of Power Sources, vol. 195, pp. 5726-5730, Sep 2010.

[32] J. Milhans, M. Khaleel, X. Sun, M. Tehrani, M. Al-Haik, and H. Garmestani, "Creep properties of solid oxide fuel cell glass-ceramic seal G18," Journal of Power Sources, vol. 195, pp. 3631-3635, Jun 2010.

[33] A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond, "Statistical continuum theory for the effective conductivity of fiber filled polymer composites: Effect of orientation distribution and aspect ratio," Composites Science and Technology, vol. 70, pp. 510-517, Mar 2010.

[34] D. S. Li, Z. Y. Liu, M. Al-Haik, M. Tehrani, F. Murray, R. Tannenbaum, and H. Garmestani, "Magnetic alignment of cellulose nanowhiskers in an all-cellulose composite," Polymer Bulletin, vol. 65, pp. 635-642, Sep 2010.

[35] D. S. Li, M. Khaleel, X. Sun, and H. Garmestani, "Representation of correlation statistics functions in heterogeneous materials using layered fast spherical harmonics expansion," Computational Materials Science, vol. 48, pp. 133-139, Mar 2010.

[36] D. S. Li, M. Baniassadi, H. Garmestani, S. Ahzi, M. M. R. Taha, and D. Ruch, "3D Reconstruction of Carbon Nanotube Composite Microstructure Using Correlation Functions," Journal of Computational and Theoretical Nanoscience, vol. 7, pp. 1462-1468, Aug 2010.

[37] M. Baniassadi, A. Ghazavizadeh, M. Safdari, H. Garmestani, and S. Ahzi, "Effect of mechanical deformation on electrical percolation of CNT polymer composites," in ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2010, pp. 893-897.

(2009)[38] G. Vialle, M. Di Prima, E. Hocking, K. Gall, H. Garmestani, T. Sanderson, and S.

C. Arzberger, "Remote activation of nanomagnetite reinforced shape memory polymer foam," Smart Materials & Structures, vol. 18, Nov 2009.

[39] J. Milhans, S. Ahzi, H. Garmestani, M. A. Khaleel, X. Sun, and B. J. Koeppel, "Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials," Materials & Design, vol. 30, pp. 1667-1673, May 2009.

[40] A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond, "Effective conductivity in isotropic heterogeneous media using a strong-contrast statistical continuum theory," Journal of the Mechanics and Physics of Solids, vol. 57, pp. 74-86, Jan 2009.

[41] A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond, "A new approximation for the three-point probability function," International journal of solids and structures, vol. 46, pp. 3782-3787, Oct 2009.

[42] S. M'Guil, S. Ahzi, H. Youssef, M. Baniassadi, and J. J. Gracio, "A comparison of viscoplastic intermediate approaches for deformation texture evolution in face-centered cubic polycrystals," Acta Materialia, vol. 57, pp. 2496-2508, May 2009.

[43] D. S. Li, H. Garmestani, and J. Schwartz, "Modeling thermal conductivity in UO2 with BeO additions as a function of microstructure," Journal of Nuclear Materials, vol. 392, pp. 22-27, Jul 2009.

[44] D. S. Li, H. Garmestani, S. Ahzi, M. Khaleel, and D. Ruch, "Microstructure Design to Improve Wear Resistance in Bioimplant UHMWPE Materials," Journal of Engineering Materials and Technology-Transactions of the Asme, vol. 131, Oct 2009.

[45] O. Hatamleh, P. M. Singh, and H. Garmestani, "Corrosion susceptibility of peened friction stir welded 7075 aluminum alloy joints," Corrosion Science, vol. 51, pp. 135-143, Jan 2009.

[46] O. Hatamleh, P. M. Singh, and H. Garmestani, "Stress Corrosion Cracking Behavior of Peened Friction Stir Welded 2195 Aluminum Alloy Joints," Journal of Materials Engineering and Performance, vol. 18, pp. 406-413, Jun 2009.

[47] H. Garmestani, M. Baniassadi, D. S. Li, M. Fathi, and S. Ahzi, "Semi-inverse Monte Carlo reconstruction of two-phase heterogeneous material using two-point functions," International Journal of Theoretical and Applied Multiscale Mechanics, vol. 1, pp. 134-149, 2009.

[48] H. Garmestani, Baniassadi, M., Li, D.S., Fathi, M., Ahzi, S., "Semi-inverse Monte Carlo reconstruction of two-phase heterogeneous material using two-point functions," International Journal of Theoretical and Applied Multiscale Mechanics, vol. 1, pp. 134-149, 2009.

[49] A. Belvin, R. Burrell, A. Gokhale, N. Thadhani, and H. Garmestani, "Application of two-point probability distribution functions to predict properties of heterogeneous two-phase materials," Materials Characterization, vol. 60, pp. 1055-1062, Sep 2009.

(2008)[50] M. K. Singh, T. Shokuhfar, J. J. D. Gracio, A. C. M. de Sousa, J. M. D. Fereira, H.

Garmestani, and S. Ahzi, "Hydroxyapatite modified with carbon-nanotube-reinforced poly(methyl methacrylate): A nanocomposite material for biomedical applications," Advanced Functional Materials, vol. 18, pp. 694-700, Mar 2008.

[51] A. Sheikh-Ali and H. Garmestani, "Changes in microhardness of cold rolled metals induced by annealing in ultra-high magnetic field," Materials Letters, vol. to be published, 2008.

[52] G. Saheli, H. Garmestani, and A. Gokhale, "Homogenization relations for elastic properties of two-phase composites using two-point statistical functions," Journal of Mechanics of Materials and Structures, vol. 3, pp. 85-106, Jan 2008.

[53] D. S. Li, A. D. Rollett, G. Vialle, and H. Garmestani, "Multiproperty microstructure and property design of magnetic materials," Journal of Engineering Materials and Technology-Transactions of the Asme, vol. 130, Apr 2008.

[54] D. S. Li, H. Garmestani, A. O. Chu, H. Ahzi, G. Alapati, M. Khatonabadi, O. Es-Said, M. T. Siniawski, L. Matrisciano, and S. Ahzi, "Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes," Polymer Science Series A, vol. 50, pp. 533-537, May 2008.

[55] H. A. Hamedani, K. H. Dahmen, D. Li, H. Peydaye-Saheli, H. Garmestani, and M. Khaleel, "Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis," Materials Science and Engineering B-Advanced Functional Solid-State Materials, vol. 153, pp. 1-9, Sep 2008.

[56] E. Camponeschi, J. Walker, H. Garmestani, and R. Tannenbaum, "Surfactant effects on the particle size of iron (III) oxides formed by sol-gel synthesis," Journal of Non-Crystalline Solids, vol. 354, pp. 4063-4069, Sep 2008.

(2007)

[57] A. D. Sheikh-Ali and H. Garmestani, "Evolution of surface and bulk textures during superplastic deformation in a zinc alloy," MATERIALS LETTERS, vol. 61, pp. 478-481, Jan 2007.

[58] D. S. Li, H. Garmestani, and S. Ahzi, "Processing path optimization to achieve desired texture in polycrystalline materials," Acta Materialia, vol. 55, pp. 647-654, Jan 2007.

[59] D. Li and D. Garmestani, "Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design," in The 13th International Symposium on Plasticity and Its Current Applications, Alaska., 2007.

[60] E. Camponeschi, R. Vance, M. Al-Haik, H. Garmestani, and R. Tannenbaum, "Properties of carbon nanotube-polymer composites aligned in a magnetic field," Carbon, vol. 45, pp. 2037-2046, Sep 2007.

(Previous Years)[61] S. S. Yan, H. Garmestani, Y. F. Tian, S. J. Hu, R. W. Gao, Y. X. Chen, G. L. Liu,

and L. M. Mei, "Free boundary domain wall pinning model for the magnetization reversal in magnetic thin films," Japanese Journal Of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers, vol. 45, pp. 93-98, Jan 2006.

[62] S. S. Yan, H. Garmestani, Y. F. Tian, and e. al., "Free boundary domain wall pinning model for the magnetization reversal in magnetic thin films," Japanese Journal Of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers vol. 45, pp. 93-98 2006.

[63] A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Thermomagnetic treatment of zinc: Selective grain growth and texture modification," Reviews on Advanced Materials Science, vol. 11, pp. 167-173, Apr 2006.

[64] S. S. Park, H. Garmestani, G. T. Bae, N. J. Kim, P. E. Krajewski, S. Kim, and E. W. Lee, "Constitutive analysis on the superplastic deformation of warm-rolled 6013 Al alloy," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 435, pp. 687-692, Nov 2006.

[65] D. S. Li, G. Saheli, M. Khaleel, and H. Garmestani, "Microstructure optimization in fuel cell electrodes using materials design," CMC-COMPUTERS MATERIALS & CONTINUA, vol. 4, pp. 31-42, Aug 2006.

[66] D. S. Li, G. Saheli, M. Khaleel, and H. Garmestani, "Quantitative prediction of effective conductivity in anisotropic heterogeneous media using two-point correlation functions," Computational Materials Science, vol. 38, pp. 45-50, Nov 2006.

[67] F. Johnson, C. Y. Um, M. E. McHenry, and H. Garmestani, "The influence of composition and field annealing on magnetic properties of FeCo-based amorphous and nanocrystalline alloys," Journal of Magnetism and Magnetic Materials, vol. 297, pp. 93-98, Feb 2006.

[68] I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar, and R. L. Snyder, "Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis," Zeitschrift fur Kristallographie, pp. 99-104, 2006.

[69] B. Z. Cui, K. Han, D. S. Li, H. Garmestani, J. P. Liu, N. M. Dempsey, and H. J. Schneider-Muntau, "Magnetic-field-induced crystallographic texture enhancement in cold-deformed FePt nanostructured magnets," Journal of Applied Physics, vol. 100, Jul 2006.

[70] B. Z. Cui, K. Han, H. Garmestani, and H. J. Schneider-Muntau, "Structure and magnetic properties of FePt and FePt-Ag nanostructured magnets by cyclic cold rolling," Journal of Applied Physics, vol. 99, Apr 2006.

[71] E. Camponeschi, B. Florkowski, R. Vance, G. Garrett, H. Garmestani, and R. Tannenbaum, "Uniform directional alignment of single-walled carbon nanotubes in. viscous polymer flow," Langmuir, vol. 22, pp. 1858-1862, Feb 2006.

[72] M. S. Al-Haik, M. Y. Hussaini, and H. Garmestani, "Prediction of nonlinear viscoelastic behavior of polymeric composites using an artificial neural network," International Journal of Plasticity, vol. 22, pp. 1367-1392, 2006.

[73] M. Zubris, R. B. King, H. Garmestani, and R. Tannenbaum, "FeCo nanoalloy formation by decomposition of their carbonyl precursors," Journal of Materials Chemistry, vol. 15, pp. 1277-1285, 2005.

[74] G. Saheli, H. Garmestani, and A. Gokhale, "Effective Elastic Properties of an Al-SiC Composite Using Two-point Statistical Mechanics Approach," International Journal of Physics and Mechanics of Solids

, 2005.[75] G. Saheli, H. Garmestani, and B. L. Adams, "Microstructure design of a two phase

composite using two-point correlation functions," Journal of Computer-Aided Design, vol. 11, pp. 103 – 115, 2005.

[76] D. S. Li, H. Garmestani, and B. L. Adams, "A texture evolution model in cubic-orthotropic polycrystalline system," International Journal of Plasticity, vol. 21, pp. 1591-1617, 2005.

[77] D. S. Li, H. Garmestani, and B. L. Adams, "A Processing Model for Texture Evolution in Cubic-Orthotropic Polycrystalline System " International Journal of Plasticity, vol. 21, pp. 1591–1617, 2005.

[78] D. S. Li, J. Bouhattate, and H. Garmestani, "Processing path model to describe texture evolution during mechanical processing," in Icotom 14: Textures of Materials, Pts 1and 2. vol. 495-497, P. V. Houtte and L. Kestens, Eds., ed, 2005, pp. 977-982.

[79] G. Jefferson, H. Garmestani, R. Tannenbaum, A. Gokhale, and E. Tadd, "Two-point probability distribution function analysis of Co-polymer nano-composites," International Journal of Plasticity, vol. 21, pp. 185-198, 2005.

[80] A. M. Gokhale, A. Tewari, and H. Garmestani, "Constraints on microstructural two-point correlation functions," SCRIPTA MATERIALIA, vol. 53, pp. 989-993, Oct 2005.

[81] I. C. Dragomir, D. S. Li, G. A. Castello-Branco, H. Garmestani, R. L. Snyder, G. Ribarik, and T. Ungar, "Evolution of dislocation density and character in hot rolled titanium determined by X-ray diffraction," Materials Characterization, vol. 55, pp. 66-74, Jul 2005.

[82] I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar, and R. L. Snyder, "Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis," Zeitschrift fur Kristallographie 2005.

[83] B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, and H. J. Schneider-Muntau, "Magnetization reversal and nanostructure refinement in magnetically annealed Nd2Fe14B/alpha-Fe-type nanocomposites," Journal of Applied Physics, vol. 97, May 2005.

[84] B. Z. Cui, K. Han, H. Garmestani, J. H. Su, H. J. Schneider-Muntau, and J. P. Liu, "Enhancement of exchange coupling and hard magnetic properties in

nanocomposites by magnetic annealing," Acta Materialia, vol. 53, pp. 4155-4161, Sep 2005.

[85] J. Bouhattate, D. Li, H. Garmestani, S. Ahzi, and M. Khaleel, "On improving predictions of texture evolution using processing path model," Materialwissenschaft Und Werkstofftechnik, vol. 36, pp. 538-540, Oct 2005.

[86] C. M. B. Bacaltchuk, G. A. Castello-Branco, and H. Garmestani, "Magnetic field effect on the microstructure of low silicon steel," in Icotom 14: Textures of Materials, Pts 1and 2. vol. 495-497, P. V. Houtte and L. Kestens, Eds., ed, 2005, pp. 1165-1170.

[87] C. M. B. Bacaltchuk, G. A. C. Branco, H. Garmestani, C. Iskandar, P. Koo, A. Kasseh, R. Abourialy, J. Ogren, and O. S. E-Said, "High magnetic field effect on texture and grain growth of GNO silicon steel," Materialwissenschaft Und Werkstofftechnik, vol. 36, pp. 561-565, Oct 2005.

[88] M. Al-Haik, M. Y. Hussaini, and H. Garmestani, "Adhesion energy in carbon nanotube-polyethylene composite: Effect of chirality," Journal of Applied Physics, vol. 97, Apr 2005.

[89] S. S. Yan, C. Ren, X. Wang, Y. Xin, Z. X. Zhou, L. M. Mei, M. J. Ren, Y. X. Chen, Y. H. Liu, and H. Garmestani, "Ferromagnetism and magnetoresistance of Co-ZnO inhomogeneous magnetic semiconductors," Applied Physics Letters, vol. 84, pp. 2376-2378, Mar 2004.

[90] G. Saheli, H. Garmestani, and B. L. Adams, "Microstructure design of a two phase composite using two-point correlation functions," Journal of Computer-Aided Materials Design, vol. 11, pp. 103-115, 2004.

[91] L. Meda, K. H. Dahmen, S. Hayek, and H. Garmestani, "X-ray diffraction residual stress calculation on textured La2/3Sr1/3MnO3 thin film," Journal of Crystal Growth, vol. 263, pp. 185-191, Mar 2004.

[92] D. S. Li, H. Garmestani, S. S. Yan, M. Elkawni, M. B. Bacaltchuk, H. J. Schneider-Muntau, J. P. Liu, S. Saha, and J. A. Barnard, "Effects of high magnetic field annealing on texture and magnetic properties of FePd," Journal of Magnetism and Magnetic Materials, vol. 281, pp. 272-275, Oct 2004.

[93] F. Johnson, H. Garmestani, S. Y. Chu, M. E. McHenry, and D. E. Laughlin, "Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing," IEEE Transactions on Magnetics, vol. 40, pp. 2697-2699, Jul 2004.

[94] C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, and A. D. Rollett, "Effect of magnetic field during secondary annealing on texture and microstructure of nonoriented silicon steel," Materials and Manufacturing Processes, vol. 19, pp. 611-617, 2004.

[95] M. S. Al-Haik, H. Garmestani, and A. Savran, "Explicit and implicit viscoplastic models for polymeric composite," International Journal of Plasticity, vol. 20, pp. 1875-1907, 2004.

[96] M. S. Al-Haik, H. Garmestani, D. S. Li, M. Y. Hussaini, S. S. Sablin, R. Tannenbaum, and K. Dahmen, "Mechanical properties of magnetically oriented epoxy," Journal of Polymer Science Part B-Polymer Physics, vol. 42, pp. 1586-1600, May 2004.

[97] M. S. Al-Haik and H. Garmestani, "A. Savran Explicit and Implicit Viscoplastic Models for Polymeric Composite

," International Journal of Plasticity vol. 20, pp. 1875–1907, 2004.

[98] S. S. Yan, M. Elkawni, D. S. Li, H. Garmestani, J. P. Liu, J. L. Weston, and G. Zangari, "Soft/hard exchange-coupled layered structures with modulated exchange coupling," Journal of Applied Physics, vol. 94, pp. 4535-4538, Oct 2003.

[99] A. D. Sheikh-Ali, J. A. Szpunar, and H. Garmestani, "Stimulation and suppression of grain boundary sliding by intragranular slip in zinc bicrystals," Interface Science, vol. 11, pp. 439-450, Oct 2003.

[100] A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Migration and reorientation of grain boundaries in Zn bicrystals during annealing in a high magnetic field," SCRIPTA MATERIALIA, vol. 48, pp. 483-488, Mar 2003.

[101] A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Boundary migration in Zn bicrystal induced by a high magnetic field," Applied Physics Letters, vol. 82, pp. 3005-3007, May 2003.

[102] A. D. Sheikh-Ali and H. Garmestani, "Assessment of contribution of intragranular slip to grain boundary sliding in bicrystals," in Superplasticity in Advanced Materials. vol. 447-4, R. I. Todd, Ed., ed, 2003, pp. 33-38.

[103] D. S. Li, H. Garmestani, and S. Schoenfeld, "Evolution of crystal orientation distribution coefficients during plastic deformation," SCRIPTA MATERIALIA, vol. 49, pp. 867-872, Nov 2003.

[104] D. S. Li, H. Garmestani, R. G. Alamo, and S. R. Kalidindi, "The role of crystallinity in the crystallographic texture evolution of polyethylenes during tensile deformation," Polymer, vol. 44, pp. 5355-5367, Aug 2003.

[105] D. S. Li, "Texture Evolution of Polyethylenes During Uniaxial Tension," Ph.D., Mechanical Engineering, Florida State University, Tallahassee, 2003.

[106] M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E. W. Lee, P. Kalu, H. Garmestani, J. Ogren, and O. S. Es-Said, "On identifying the most critical step in the sequence of heat treating operations in a 7249 aluminum alloy," Engineering Failure Analysis, vol. 10, pp. 199-207, Apr 2003.

[107] H. Garmestani, M. S. Al-Haik, K. Dahmen, R. Tannenbaum, D. S. Li, S. S. Sablin, and M. Y. Hussaini, "Polymer-mediated alignment of carbon nanotubes under high magnetic fields," Advanced Materials, vol. 15, pp. 1918-+, Nov 2003.

[108] E. S. Choi, J. S. Brooks, D. L. Eaton, M. S. Al-Haik, M. Y. Hussaini, H. Garmestani, D. Li, and K. Dahmen, "Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing," Journal of Applied Physics, vol. 94, pp. 6034-6039, Nov 2003.

[109] G. A. Castello-Branco, C. M. B. Bacaltchuk, and H. Garmestani, "Effect of cold rolling on the annealing texture of a near-alpha titanium," in Thermec'2003, Pts 1-5. vol. 426-4, T. Chandra, J. M. Torralba, and T. Sakai, Eds., ed, 2003, pp. 701-706.

[110] C. M. B. Bacaltchuk, G. A. Castello-Branco, B. Gault, and H. Garmestani, "Effect of high magnetic field during primary annealing on texture of silicon steel," in Thermec'2003, Pts 1-5. vol. 426-4, T. Chandra, J. M. Torralba, and T. Sakai, Eds., ed, 2003, pp. 3733-3738.

[111] M. S. Al-Haik, H. Garmestani, and I. M. Navon, "Truncated-Newton training algorithm for neurocomputational viscoplastic model," Computer Methods in Applied Mechanics and Engineering, vol. 192, pp. 2249-2267, 2003.

[112] M. L. Weaver, C. W. Calhoun, and H. Garmestani, "Microstructure, texture, and mechanical properties of continuously cast gamma TiAl," Journal of Materials Science, vol. 37, pp. 2483-2490, Jun 2002.

[113] A. D. Sheikh-Ali, J. A. Szpunar, and H. Garmestani, "Grain Boundary Sliding during Creep: Role of Boundary Misorientation and Strain Compatibility," Minerals, Metals and Materials Society, pp. 127-136, 2002.

[114] A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Magnetically induced texture development in zinc alloy sheet," SCRIPTA MATERIALIA, vol. 46, pp. 857-862, Jun 2002.

[115] A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Texture development in Zn-1.1%Al alloy under strong magnetic field," in Textures of Materials. vol. 408-4, D. N. Lee, Ed., ed, 2002, pp. 955-960.

[116] D. S. Li and H. Garmestani, "Texture evolution and stress evolution of polyethylene during uniaxial extension," Abstracts of Papers of the American Chemical Society, vol. 223, pp. 078-PMSE, Apr 2002.

[117] M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E. W. Lee, P. Kalu, H. Garmestani, and O. S. Es-Said, "The effect of varying the solution treatment temperature, natural aging treatment and artificial aging treatment on the mechanical strength of 7249 aluminum alloy," in Aluminum Alloys 2002: Their Physical and Mechanical Properties Pts 1-3. vol. 396-4, P. J. Gregson and S. J. Harris, Eds., ed, 2002, pp. 1121-1126.

[118] K. Han, A. Ishmaku, Y. Xin, H. Garmestani, V. J. Toplosky, R. Walsh, C. Swenson, B. Lesch, H. Ledbetter, S. Kim, M. Hundley, and J. R. Sims, "Mechanical properties of MP35N as a reinforcement material for pulsed magnets," IEEE Transactions on Applied Superconductivity, vol. 12, pp. 1244-1247, Mar 2002.

[119] H. Garmestani, S. R. Kalidindi, L. Williams, C. M. Bacaltchuk, C. Fountain, E. W. Lee, and O. S. Es-Said, "Modeling the evolution of anisotropy in Al-Li alloys: application to Al-Li 2090-T8E41," International Journal of Plasticity, vol. 18, pp. 1373-1393, 2002.

[120] M. S. Al-Haik and H. Garmestani, "A composite cylinder model for the prediction of residual stresses, in gamma-titanium composites," Journal of Materials Engineering and Performance, vol. 11, pp. 530-536, Oct 2002.

[121] B. L. Adams, M. Lyon, B. Henrie, S. R. Kalidindi, and H. Garmestani, "Spectral integration of microstructure and design," in Textures of Materials, Pts 1 and 2. vol. 408-4, D. N. Lee, Ed., ed, 2002, pp. 487-492.

[122] Y. Xin, K. Han, N. Mateeva, H. Garmestani, P. N. Kalu, and K. H. Dahmen, "Microstructures of La(1-x)A(x)(A = Ca or Sr)MnO3-delta thin films by liquid-delivery metalorganic chemical vapor deposition," Journal of Materials Research, vol. 16, pp. 3073-3083, Nov 2001.

[123] M. R. Vaghar and H. Garmestani, "Three-dimensional axisymmetric stress analysis of superconducting magnets using Green's function solution," Journal of Applied Mechanics-Transactions of the Asme, vol. 68, pp. 11-18, Jan 2001.

[124] A. D. Sheikh-Ali and H. Garmestani, "On the independent behavior of grain boundary sliding and intragranular slip during superplasticity," in Superplasticity in Advanced Materials, Icsam-2000. vol. 357-3, N. Chandra, Ed., ed, 2001, pp. 393-398.

[125] L. Meda, L. Kennon, C. Bacaltchuk, H. Garmestani, and K. H. Dahmen, "Effects of thermal annealing on the texture of La0.67Sr0.33MnO3 thin films," Journal of Materials Research, vol. 16, pp. 1887-1889, Jul 2001.

[126] L. Meda, C. Bacaltchuk, H. Garmestani, and K. H. Dahmen, "Residual strain and texture in strontium-doped lanthanum manganite thin films," Journal of Materials Science-Materials in Electronics, vol. 12, pp. 143-146, 2001.

[127] D. Li, H. Garmestani, S. R. Kalidindi, and R. Alamo, "Crystallographic texture evolution in high-density polyethylene during uniaxial tension," Polymer, vol. 42, pp. 4903-4913, May 2001.

[128] H. Garmestani and M. A. Zikry, "Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday - Editorial," International Journal of Plasticity, vol. 17, pp. 1303-1304, 2001.

[129] H. Garmestani, M. R. Vaghar, and E. W. Hart, "A unified model for inelastic deformation of polycrystalline materials - application to transient behavior in cyclic loading and relaxation," International Journal of Plasticity, vol. 17, pp. 1367-1391, 2001.

[130] H. Garmestani, S. Lin, B. L. Adams, and S. Ahzi, "Statistical continuum theory for large plastic deformation of polycrystalline materials," Journal of the Mechanics and Physics of Solids, vol. 49, pp. 589-607, Mar 2001.

[131] H. Garmestani, M. Al-Haik, T. A. Townsley, and C. Sabinash, "Residual stress development during fabrication and processing of gamma-titanium based composites," SCRIPTA MATERIALIA, vol. 44, pp. 179-185, Jan 2001.

[132] M. S. Al-Haik and H. Garmestani, "Durability study of a polymeric composite material for structural applications," Polymer Composites, vol. 22, pp. 779-792, Dec 2001.

[133] M. Al-Haik, M. R. Vaghar, H. Garmestani, and M. Shahawy, "Viscoplastic analysis of structural polymer composites using stress relaxation and creep data," Composites Part B-Engineering, vol. 32, pp. 165-170, 2001.

[134] B. L. Adams, A. Henrie, B. Henrie, M. Lyon, S. R. Kalidindi, and H. Garmestani, "Microstructure-sensitive design of a compliant beam," Journal of the Mechanics and Physics of Solids, vol. 49, pp. 1639-1663, Aug 2001.

[135] M. Trinca, A. Avalino, H. Garmestani, J. Foyos, E. W. Lee, and O. S. Es-Said, "Effect of rolling orientation on the mechanical properties and crystallographic texture of 2195 aluminum-lithium alloy," in Aluminium Alloys: Their Physical and Mechanical Properties, Pts 1-3. vol. 331-3, E. A. Starke, T. H. Sanders, and W. A. Cassada, Eds., ed, 2000, pp. 849-854.

[136] A. D. Sheikh-Ali and H. Garmestani, "NHMFL Annual Research Review," The National High Magnetic Field Laboratory, Tallahassee2000.

[137] S. Lin, H. Garmestani, and B. Adams, "The evolution of probability functions in an inelasticly deforming two-phase medium," International journal of solids and structures, vol. 37, pp. 423-434, Jan 2000.

[138] S. Lin and H. Garmestani, "Statistical continuum mechanics analysis of an elastic two-isotropic-phase composite material," Composites Part B-Engineering, vol. 31, pp. 39-46, 2000.

[139] H. Garmestani, X. Dong, L. Brandao, and H. Dahmen, "Texture analysis in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials," Journal of Textures and Microstructures, vol. 34, pp. 65-74, 2000.

[140] M. L. Weaver, L. P. M. Brandao, H. Garmestani, E. S. Gillman, K. H. Dahmen, and A. Morrone, "Microcharacterization of liquid delivery metalorganic chemical vapor deposition processed thin film materials exhibiting giant magnetoresistance," Journal of Materials Research, vol. 14, pp. 2007-2011, May 1999.

[141] W. D. Markiewicz, M. R. Vaghar, I. R. Dixon, and H. Garmestani, "Generalized plane strain analysis of superconducting solenoids," Journal of Applied Physics, vol. 86, pp. 7039-7051, Dec 1999.

[142] E. W. Lee, P. N. Kalu, L. Brandao, O. S. Es-Said, J. Foyos, and H. Garmestani, "The effect of off-axis thermomechanical processing on the mechanical behavior of textured 2095 Al-Li alloy," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 265, pp. 100-109, Jun 1999.

[143] H. Garmestani and K. Harris, "Orientation determination by EBSP in an environmental scanning electron microscope," SCRIPTA MATERIALIA, vol. 41, pp. 47-53, Jun 1999.

[144] F. Booeshaghi and H. Garmestani, "On the application of load relaxation in characterizing superplastic Al-Li 8090," SCRIPTA MATERIALIA, vol. 40, pp. 509-516, Jan 1999.

[145] N. Bednar and H. Garmestani, "Biaxial testing of high strength carbon fiber composite cylinders for pulsed magnet reinforcement," Composites Part a-Applied Science and Manufacturing, vol. 30, pp. 147-152, 1999.

[146] M. A. Zikry and H. Garmestani, "Special issue: Deformation and failure modes in multiphase materials," International Journal of Plasticity, vol. 14, pp. 671-671, 1998.

[147] M. L. Weaver and H. Garmestani, "Microstructures and mechanical properties of commercial titanium foils processed via the melt overflow process," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 247, pp. 229-238, Jun 1998.

[148] K. E. Harris, F. Ebrahimi, and H. Garmestani, "Texture evolution in NiAl," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 247, pp. 187-194, Jun 1998.

[149] M. A. Z. H. Garmestani, "Deformation and failure modes in multiphase materials," International Journal of Plasticity, vol. 14, pp. 671-671 1998.

[150] H. Garmestani, S. Lin, and B. L. Adams, "Statistical continuum theory for inelastic behavior of a two-phase medium," International Journal of Plasticity, vol. 14, pp. 719-731, 1998.

[151] H. Garmestani, P. Kalu, and D. Dingley, "Characterization of Al-8090 superplastic materials using orientation imaging microscopy," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 242, pp. 284-291, Feb 1998.

[152] J. Schwartz, B. C. Amm, H. Garmestani, D. K. Hilton, and Y. Hascicek, "Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite conductors," IEEE Transactions on Applied Superconductivity, vol. 7, pp. 2038-2041, Jun 1997.

[153] H. Garmestani, P. N. Kalu, and F. Booeshaghi, "Micromechanical investigation and phenomenological modeling of Al-8090 superplastic materials," Materials Science Forum, vol. 243-, pp. 569-574, 1997.

[154] F. Booeshaghi and H. Garmestani, "On the existence of threshold stress," SCRIPTA MATERIALIA, vol. 38, pp. 89-94, Dec 1997.

[155] M. R. Vaghar, H. Garmestani, and W. D. Markiewicz, "Elastoplastic stress analysis of Nb3Sn superconducting magnet," Journal of Applied Physics, vol. 80, pp. 2490-2500, Aug 1996.

[156] H. Garmestani, K. Harris, and P. Kalu, "Orientation Imaging Microscopy in Environmental Scanning Electron Microscopy," Journal Scanninig Microscopies, vol. 20, 1996.

[157] A. W. Cox, H. Garmestani, W. D. Markiewicz, and I. R. Dixon, "Power series stress analysis of solenoid magnets," IEEE Transactions on Magnetics, vol. 32, pp. 3012-3015, Jul 1996.

[158] S. Mukherjee, H. Garmestani, and N. Chandra, "EXPERIMENTAL INVESTIGATION OF THERMALLY-INDUCED PLASTIC-DEFORMATION IN MMCS USING BACK SCATTERED KIKUCHI METHOD," Scripta Metallurgica et Materialia, vol. 33, pp. 93-99, Jul 1995.

[159] H. Garmestani, M. R. Vaghar, D. Markiewicz, and N. Chandra, "STRESS-ANALYSIS OF AN ORTHOTROPIC WORK-HARDENING CYLINDER WITH BODY FORCE," Mechanics of Structures and Machines, vol. 23, pp. 521-548, 1995.

[160] W. D. Markiewics, M. R. Vaghar, I. R. Dixon, and H. Garmestani, "Generalized Plane Strain Analysis of Solenoid Magnets," IEEE Transactions on Magnetics, vol. 30, pp. 2233-2236, 1994.

[161] H. Garmestani, R. Vaghar, and W. D. Markiewics, "Concepts of Plasticity in Solenoid Stress Analysis," IEEE Transactions on Magnetics, vol. 30, pp. 2237-2240, 1994.

[162] N. Chandra, K. Murali, and H. Garmestani, "Experimental and Numerical Investigation of Superplastic Deformation Mechanisms," Material Science Forum, vol. 170-172, pp. 47-52, 1994.

[163] N. Chandra, C. R. Ananth, and H. Garmestani, "Micromechanical Modeling of Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite," Journal of Composite Technology & Research, vol. 16, pp. 37-46, 1994.

[164] E. W. Hart and H. Garmestani, "Mechanical Testing Using Direct Control of the Inelastic Strain Rate," Journal of Experimental Mechanics, vol. 33, pp. 1-6, 1993.

[165] C. R. Ananth, N. Chandra, and H. Garmestani, "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites," Computational Plasticity: Fundamentals and Applications, pp. 2205-2216, 1992.

[166] H. Garmestani and E. W. Hart, "Controlled Inelastic Strain Rate Experiments," JOM, J. Min. Met. Mat. Sci, vol. 40, 1988.

[167] H. Garmestani and B. Adams, "Transient Small-Scale Yield Behavior of Textured Copper Tubing Under Biaxial Loading," Journal of Engineering Materials and Technology, vol. 108-2, pp. 127-134, 1986.

[168] B. L. Adams, R. K. Raghavan, and H. Garmestani, "BIAXIAL SMALL STRAIN YIELD BEHAVIOR IN SINGLE-PHASE METAL TUBES," Journal of Metals, vol. 36, pp. 60-60, 1984.

[169] H. Garmestani and B. L. Adams, "INFLUENCE OF RECOVERY ANNEALING ON BIAXIAL SMALL-SCALE YIELDING OF COPPER," Journal of Metals, vol. 35, pp. A55-A55, 1983.

Books Published:1. "Advances in Superplasticity and Superplastic Forming", Edited by N. Chandra,

H. Garmestani, R. E. Goforth, A TMS Publication, Proceedings of a Symposium sponsored by the MDMD Shaping and Forming Committee, held at the TMS/ASM Materials Week 2-5 November, 1992.

2. Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H, Special issue: Int. J. Plasticity 14: (8) 671-671 1998

3. Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001.

Laboratory Manual:"Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level course in experimental mechanics in the Dept. of Mechanical Engineering at FAMU/FSU College of Engineering.

Proceedings:(2011)

1. Zohreh Razavi Hesabi, Nageh Allam, Klaus Dahmen, Hamid Garmestani and Mostafa El-Sayed,Enhanced Photo-Assisted Water Splitting Using Titanium-Niobium Mixed Oxide Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting & Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA

2. Zohreh Razavi Hesabi, Nageh Allam, Hossein Sojoudi, Klaus Dahmen, Hamid Garmestani and Mostafa Elsayed; TiO2 Nanotubes/CNTs/Graphene Heterojunction Electrodes for Solar Energy-Driven Applications, 2011 MRS Fall meeting & Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA

(2009)3. Majid Baniassadi, Akbar Ghazavizadeh, Masoud Safdari, Hamid Garmestani,

Said AHZI, Effect of Mechanical Deformation on Electrical Percolation of CNT PolymerComposites, Proceedings of the ASME 2009 International Mechanical Engineering, Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

4. Effect of Low Field Magnetic Annealing on the Viscoelastic Behavior of a Structural Epoxy, Mehran Tehrani, Marwan Al-Haik Hamid Garmestani, Dongsheng Li,Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

5. H. Garmestani, “Effect of Deformation History on Magnetic Processing of Materials”, May 12, 2008, Presented to IMAP3 Tokeo, Japan,

6. Multiphysics Approach for the Behavior of Polymers and Polymer-based Nanomaterials, Proceedings of third International Conferences on Polymer Behavior, Nov 3-7, 2008, Marrakech, Morocco

7. Hoda Amani Hamedani, Klaus-Hermann Dahmen, Dongsheng Li, Hamid Garmestani, Effect Of Spray Parameters On The Microstructure Of La1-

Xsrxmno3 Cathode Prepared By Spray Pyrolysis, accepted for publication in 32nd international conference & exposition on advanced ceramics & composites January 27–February 1, 2008, Daytona Beach, Florida USA

8. Microstructure Design Using Statistical Correlation Functions. Hamid Garmestani, School of Mechanical and Materials Engineering, Georgia Institute of Technology, presented to the First American Academy of Mechanics, New Orleans, June 17-20 (keynote talk);

9. Microstructure Design and Realization of Nanocomposite Structures, Hamid Garmestani, 2nd International Joint Conference On Composite Engineering 8-11 July 2008, Vancouver Canada. (Keynote)

(2007)1. Controlling Residual Stress in Metal Matrix Ceramic Fiber Composite Marwan S

Al-Haik, Hamid Garmestani, and Yousef Haik, Mater. Res. Soc. Symp. Proc. Vol. 977 © 2007 Materials Research Society 0977-FF03-03.

2. “Soft Magnet Multi Property Microstructure Design”, D. Li. H. Garmestani, G. Vialle, The 13th International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska,

3. “Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design”, D. Li. H. Garmestani, The 13 th International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska.

4. Texture Prediction of cold and warm rolled Titanium using processing path model, J. Bouhattate1, D.S. Li2, G. Castello-Branco3, H. Garmestani, Germany conference on Knowledge management, July 3, 2007

5. H. Garmestani, D.S. Li, M.A. Khaleel. Microstructure sensitive design and quantitative prediction of effective conductivity in fuel cell design. Proceedings of PRICM6 (the sixth Pacific Rim International Conference on Advanced Materials and Processing), 2007, 315-318.

6. Influence Functions for Fatigue Microcrack Driving Force as an Efficient Alternative to Finite Element Analysis for Exploration of Microstructure-Property Relations within Very High Cycle Fatigue Regime: Nima Salajegheh, David L. McDowell, Hamid Garmestani, Rajesh Prasanna, Georgia Institute of Technology, USA, presented to Fourth International Conference on Very High Cycle Fatigue August 19-22, 2007

(2006)7. Microstructure and Mechanical Properties of Rolled Sheet and Forged Block

Gamma-Titanium Aluminides: Russell J. Foon; Julius De Rojas1; Sun Hyung Kim; Nicole Sporer1; Richard Clark; John Ogren; Omar Es- Said; Kyle Mori; Elizabeth Villalobos1; Hamid Garmestani; Dongsheng Li; Gopal Das; Titanium Alloys for High Temperature Applications - A Symposium Dedicated to the Memory of Dr. Martin Blackburn: Titanium Based Intermetallic Alloys for High Temperature Applications – Gamma, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006.

8. Processing Path Design and the Integration of Texture and Micro- Texture Evolution: Hamid Garmestani Amiya Mukherjee Symposium on Processing and Mechanical Response of Engineering Materials: Modeling of Material Behavior

Sponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Shaping and Forming Committee, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006

9. H. Garmestani, “Statistical Distribution Functions for Multi-Scale Design of Materials”, Presented to University of Luxembourg and Henri Tudor Research center, June 23rd, 2006.

10.H. Garmestani, “Statistical Correlation Functions as a Tool for Microstructural Design”, Presented to Northwest Consortium for Multiscale Mathematics and Applications Multiscale Modeling of Materials: Mathematics and Computation May 25-30, 2006. University of Puget Sound, Tacoma, WA.

(2005)11.B. Z. Cui , K. Han , H. Garmestani , N. M. Dempsey , J. P. Liu , H. J. Schneider-

Muntau, “Magnetic Properties of FePt and FePtAg Nanostructured Magnets by Cyclic Cold Rolling”, 50th MMM Conference (10/30/05-11/03/05), San Jose, California

12.C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, “High Magnetic Effects on Texture of Grain-Non Oriented Silicon Steel”, Proceeding of the 1st

International Conference on Diffusion in Solids and Liquids. DSL-2005, July 6-8, University of Aveiro, Aveiro, Portugal.

13.H. Garmestani, D.S. Li, J. Bouhattate, S. Ahzi, and M. Khaleel, Processing Path Model to Describe Texture Evolution During Mechanical Processing, Proceeding of the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.

14.C.M.B. Bacaltchuk, G.A. Castello-Branco1, H. Garmestani1, Magnetic Field effect on the microstructure of low Silicon Steel, Proceeding of the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.

15.M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on the Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of the 16th International Plansee Conference on Refractory Materials (May 2005).

(2004)16.G. Saheli, H. Garmestani, A. Gokhale, “Effective Elastic Properties of an Al-SiC

Composite Using Two-point Statistical Mechanics Approach”, The 8th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2004, June 13-17, 2004, Ohio State University, US

17.B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal and Nanostructure Refinement in Magnetically Annealed Nd2Fe14B/a-Fe-type Nanocomposites, accepted by the 49th MMM Conference and will appear on JAP, 2005.

18.B. Z. Cui, k. Han , h. Garmestani , h. J. Schneider-muntau, j. H. Su, j. P. Liu, enhancement of the material properties by magnetic field assisted phase transformation, International Workshop on Materials Analysis and Processing in Magnetic Fields Tallahassee, FL, March 2004, in press.

19.B. Z. Cui, K. Han, H. Garmestani, H. Schneider-Muntau, J. P. Liu, “Nanostructure, Crystallographic Texture, Exchange Coupling, In-plan Magnetic Anisotropy and Hard Magnetic Properties of Nd2Fe14B/a-Fe-type Nanocomposites Prepared by Magnetic Annealing”, DARPA MetaMaterials PI Review (abstract), Colorado Springs, CO, USA, August 4-7 (2003) Part II, p11.

20.B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal, Nanostructure Optimization and Magnetic Property Enhancement in Magnetically Annealed Nd2Fe14B/-Fe-type Nanocomposites, Proceeding of 2004 MMM conference.

(2003)21.D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient

during Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7, Published by NEAT Press, 2003, 487-489.

22.G. Saheli, A. Belvin, H. Garmestani, and B. L. Adams, “Microstructure sensitive design for a two-phase composite material”, PLASTICITY 2003, July 7-11, 2003, Quebec City.

23.D.S. Li, H. Garmestani. A Linear Model of Processing Path in Cubic-Orthotropic System. Multiscale modeling and characterization of elastic inelastic behavior of engineering materials, Published by Kluwer, Eds: S. Ahzi et al., 2003, pp. 307-314

24.D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced Materials, Oct. 2003.

25.D.S. Li, H. Garmestani. Modeling of Processing Path in Processing of Titanium. Proceedings of International Light Metals Conference 2003.

26.H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase composites”, 7th US National Congress on Computational Mechanics at Albuquerque, New Mexico, July 27-31, 2003.

27.Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)₂(Fe,Co,Mo)₁₄B/[[alpha]] Fe Nanocomposites ID: TMAG-03-10-0233, MMM conference, 2003

28.BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, ID: TMAG-03-10-0248, 2003

29.H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, September 4-6, 2003.

30.C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D. Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.

31.G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the THERMEC’2003 Conference – Madrid, Spain - July/03

32.G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - Proceedings of the TI-2003, 10th International Conference in Titanium, Hamburg, Germany – July 2003

33.G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium Name: General Abstracts 2003, Chicago, Illinoys, November 2003

34.G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T '03: Materials Science & Technology 2003- Symposium:Processing and Properties of Structural Materials,Chicago, Illinoys, November 2003

35.C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium: Processing-Structure-Property-Performance Relationships,Chicago, Illinoys, November 2003

36.Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling two-point correlation functions, PLASTICITY 2003, Quebec City July 7-11

37.H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec City July 7-11

38.(2002)39.D. Li; H. Garmestani, “Influence of Branch Length on the Texture Evolution of

Linear Low Density Polyethylene”, Bulletin of America Physics Society, March meeting, 2002, 309

40.L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy and application to Hart’s model” TMS Annual Meeting, Columbus, Ohio, October 6-9th, 2002

41.S.S. Yan; M. Elkawni; D. Li; H. Garmestani etc, “Experimental and Theoretical study on Soft/Hard Exchange-coupled NiFe/SmFe Bilayers”, DARPA MetaMaterials PI Review, 2002, p22

42.“Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference in Morocco, October 20-24th, 2002, Marakesh, Morocco.

43.M.S. Al-Haik and H. Garmestani, G. Jefferson” Modeling of Process Induced Residual Stress in Gamma Titanium Composite”, The Materials Information Society (ASM) 11th International Symposium on Processing and Fabrication of Advanced Materials, Materials Solutions Conference, Columbus Ohio, October 7-9 2002.

44.H. Garmestani, G. Saheli, G. Bronco, Optimization of microstructure in Ti-6Al-4V using statistical continuum mechanics, Proceeding of the AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, Grand Hyatt Atlanta, Georgia, 4-6 September 2002.

45.G. Jefferson, H. Garmestani, B. L. Adams, Two point Distribution Functions and application to Co-Copolymers, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

46.H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of heterogeneity using strain energy, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

47.H. Garmestani, M. Fathi, G. Saheli, "Statistical Continuum Approaches Based On Parallel And Distributed Processing", The 2002 International Multi-conference in Computer Science, June 24-27 2002, Las Vegas, Nevada, USA.

48.M.S. Al-Haik and H. Garmestani, ” Creep Prediction of Carbon Fiber/Epoxy Composite Using Neural Network” WAC (World Automation Congress), Orlando FL, June 9-13, 2002.

49.L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “An Assessment of In-Service Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy” paper for the NUMISHEET conference in Korea, 2002.

50.S. R. Kalidindi, B. L. Adams, and H. Garmestani, Process design to achieve targeted microstructures, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

51.G. Jefferson, B. L. Adams, S. Lin, R. Tannenbaum and H. Garmestani, Two point probability distribution functions: application to block co-polymer nanocomposites, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

52.(2001)53.D. Li; H. Garmestani, “Texture Evolution in Ethylene-Octene Copolymer during

Uniaxial Tension”, 50th Annual Denver X-ray Conference, Steamboat Springs, Colorado, July 2001

54.D. Li, H Garmestani, S.R Kalidini, R. Alamo, “Texture Evolution and Morphology Evolution in High Density Polyethylene during Uniaxial Tension”, Bulletin of America Physics Society, March meeting, 2001, 203

55.B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals”, Proceeding of the TMS conference on Microstructure Modeling and Prediction During Thermomechanical Processing, Edited By: Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox, Zhe Jin, Held November 4-8, 2001, Indianapolis, Indiana.

56.H. Garmestani, “A Constitutive Model for Cyclic Loading and Relaxation”, Proceeding of the ASME publication for constitutive modeling of advanced materials, Orlando, Nov. 5-8, IMECE 2000 Dr. Marwan Khraisheh.

57.Garmestani, M.S. Al-Haik and S. Downey, ”Durability Analysis of an Autoclave Structural Polymer Composite Using Stress Relaxation and Creep Data,” CANCOM 2001, Third Canadian International Composite Conference, Montréal (Quebec) Canada, August 21-24 2001.

58.(2000)59.L. Meda, H. Garmestani, …“Residual Stress in Thin Films of Strontium-Doped

Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco, CA.

60.H. Garmestani, s. Lin, b. L. Adams, “statistical continuum theory for characterization of heterogeneity in an inelasticly deforming body” Proceeding of the Multi-scale Modeling by Nasr Goneim, LosAngeles, 8/21/2000

61.H. Garmestani1, S. R. Kalidindi2, L. Williams1, E. W. Lee3, O. S. Es-Said “Evolution of Anisotropy In Al-Li 2090-T8e41 Alloy”, Proceeding of the Plasticity 2000, Whistler, Canada, July 15-24, 2000.

62.H. Garmestani, B. L. Adams, “Statistical Continuum Theory for Characterization of Heterogeneity in an Inelastic Deforming Body”, Proceeding of ICCE/7 International Committee on Composite Engineering, Denver, Co, July 2- June 8, 2000

63.M.S. Al-Haik and H. Garmestani, ” Implicit Creep Model of Polymer Matrix Composites By Means Of Neural Network,” ICCE/7 Conference, Denver, Colorado, July 2-8, 2000.

64.A.D. Sheikh-Ali, J.A. Szpunar and H. Garmestani, On the relationship between grain boundary sliding and intragranular slip during superplastic deformation, Superplasticity--Current Status and Future Potential (USA), Proceeding of MRS

Fall Meeting, November 29 - December 3, 1999, Boston, Massachussets,193-198, 2000

65.H. Garmestani, M. Al-Haik and S. Lin,” Statistical Continuum Mechanics Representation of Material Heterogeneity Using Neural Networks,” WAC 2000 Conference, Maui, Hawaii June 11-16, 2000.

(1999)66.H. Garmestani, S. Lin, “Statistical Continuum Theory for Inelastic Deformation of

a Polycrystalline Medium”, Proceeding of ICCE/6 International Committee on Composite Engineering, Pullman, Washington, June 28-July3, 1999.

67.“Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

68.M. Al-Haik, H. Garmestani, and T. A. Townsley, ” A Concentric Cylinder Model for Residual Stress Prediction of High Temperature Titanium Aluminide Composite Materials,” ICCE/6, 6th Annual International Conference on Composites Engineering, Orlando Florida, June 27-July3 1999.

69.“Residual stress development during fabrication and processing of Gamma Titanium based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

70.“A phenomenological model for superplastic materials”, H. Garmestani and F. Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

71.H. Garmestani, Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading and Relaxation”, Presented at the special Symposium to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

72.Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

73.“Mechanical and Microscopy Analysis of Carbon Composites during high Temperature Application”, Shahawy, H. Garmestani, C. Goins, M. AlHaik, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas

74.“Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, M. Li, E. Gillman, K.-H. Dahmen, X. Dong , L. Brandao, H. Garmestani, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

75.“A Phenomenological Model For Aluminum Based Superplastic Materials”, H. Garmestani and F. Booeshaghi Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau, Alaska, July 13-17, 1997

76.“Unified Modeling of Cyclic Loading and Relaxation”, H. Garmestani Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau, Alaska, July 13-17, 1997.

77.“Phenomenological Modeling of Superplastic Al-7475”, F. Booeshaghi, H. Garmestani, P. N. Kalu, Light Weight Alloys for Aerospace Applications IV. Edited by E. W. Lee, W. E. Frazier, N. J. Kim, and K. Jatta. The Minerals, Metals & Materials Society, 1997.

78.“Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, in NASA ACE Center Series: Proceedings of the NASA University Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol,. 1, pages 925-929

(1997).79. “Texture Studies of Gamma Titanium Aluminide Sheets produced by melt

overflow rapid solidification”, M. L. Weaver, H. Garmestani, G. Das, in High Ordered Intermetallic Alloys VII, Mat. Res. Soc. Symp. Proc., v. 460, pages 243-248 (1997)

80.“A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco, Proceedings of the NASA University Research Centers, in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 931-936 (1997).

81. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, M.L. Weaver and H. Garmestani, in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).

82.M.L. Weaver and H. Garmestani, “Texture Studies of Gamma Titanium Aluminide Sheets Produced By Melt Overflow Rapid Solidification,” to appear in the proceedings of the Materials Research Society Fall Meeting vol. 460, session on High Temperature Ordered Intermetallic Alloys VII, Boston, MA, Materials Research Society, November 1996.

83.“Microstructural Characterization of Al8090 Superplastic Materials Using Orientation Imaging Microscopy“, Proceeding of the Microscopy Society of America Meeting in Kansas City, August 13-17, 1995. P

84.“Low Cycle Fatigue of High Temperature Composite Materials”, N. Fox, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. p237-238

85.“Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in Inhomogeneous Materials”, H. Garmestani, L. Lourenco, M. Gholami, M. Ebrahimi, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP245-246

86.“Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H. Garmestani, D. Markiewics, I. Dixon, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP167-168.

87.“Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”, M. R. Vaghar, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP 769-770

88.“Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”, H. Garmestani, P. Kalu, D. Dingley, Proceeding of the Light Weight Alloys for Aerospace Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995., PP177-187.

89.“Rheological Modeling of Superplasticity”, F. Booeshaghi, H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 169-170

90.“Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium”, H. Garmestani, S. Lin, B. Adams, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995.

91.“Neural Network Based Simulation of Transient Behavior of Aluminum-1100”, Feteih, S., Tsai, J. Booeshaghi, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 155-156

92.“Microscopic Strain Field Analysis”, K. Harris, H. Garmestani, L. Lourenco, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 211-212

93.“Stress Analysis of a Superconducting Solenoid Using Green’s Function Solution”, M.R. Vaghar and H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 631-632

94."Statistical Continuum Theory For Inelastic Behavior of A Two-Phase Medium", H. Garmestani, Proceedings of the 14th Imacs World congress on Computational and Applied Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994.

95."Investigation of Deformation Mechanisms of Superplastic Materials Using Diffraction Patterns", H. Garmestani, G.S. Sohi, S. Mukherjee, N. Chandra, Superplasticity and Superplastic Forming of Advanced Materials, 10 Pages, Ed. N. Chandra et. al., TMS Publications, 1993.

96."Experimental and Numerical investigation of Superplastic Forming", N Chandra, H. Garmestani, International Conference on Superplasticity in Advanced Materials, ICSAM'94, May 24-26, 1994, Moscow, Russia.

97."Effect of Interfacial Properties on the Transverse Mechanical Behavior of Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N. Chandra, K. Murali, H. Garmestani, Proceedings of the Fall meeting of The Minerals, Metals, & Materials Society (TMS) and ASM International, Pittsburgh, PA, October 17-21, 1993. TMS Publication.

98."Elastoplastic Analysis of Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Proceeding of the International Conference on computational plasticity, Barcelona, Spain, April 5-7,1992.

99."Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216.

100. “Controlled Inelastic Strain Rate Experiments”, Garmestani H., Hart E. W., JOM-J Min Met Mat S 40: (7) A55-A55 Jul 1988

101. Biaxial small strain yield behavior in single-phase metal tubes,” Adams B. L., Raghavan R. K., Garmestani H., JOM-J MIN MET MAT S 36: (7) 60-60 1984

102. Conferences organized:103. One of the organizers for the  First International Conference on Laser

Peening (15th-17th December, 2008) Houston-Texas, USA104. Organized a session on Materials Design as part of the Plasticity    2009,

St Thomas, Virgin Islands, USA, January 3-8, 2009105. Organized the 3rd International Joint Conference on Advanced Materials

and Design- ISDT 2009 - Integrated Systems, Design and Technology - 106. Co-organized the Computational Materials Design symposium as part of

MMM conference in Tallahassee, Fl on October 26-30, 2008.1.

PRESENTATIONS AND INVITED TALKS:

(2011)1. Z. Razavi Hesabi, J. Gracio, S. Ahzi, H. Garmesatni, “Contribution of different

strengthening mechanisms in metal matrix nanocomposites”, TMS 2011, 26 Feb-3 March, San Diego, USA.

2. Hoda A. Hamedani,Nageh K. Allam, Hamid Garmestani and Mostafa A. El-Sayed, Synthesis and Characterization of Vertically Oriented Sr-doped TiO2 Nanotubes Using Electrochemical Anodization, in Process

3. Hoda A. Hamedani,Nageh K. Allam, Hamid Garmestani and Mostafa A. El-Sayed, poster presentation at the TMS2011 Conference, Feb. 27th- Mar. 3rd, 2011.

4. Pooyan P., Tannenbaum R., Garmestani H. [Feb, 2011], "Fabrication of a Cellulose-based Nanocomposite with an improved Supermolecular Structure as a Potential Scaffold in Cardiovascular Tissue Engineering", Georgia Tech Research and Innovation Conference, Atlanta, GA.

5. Pooyan P., Tannenbaum R., Garmestani H. [Feb, 2011], "Cellulose-based Scaffold in Cardiovascular Tissue Engineering", Biomimetic and Bio-inspired Materials at TMS conference, San Diego, CA,

6. Pooyan P., Tannenbaum R., Garmestani H. [March, 2011], "Cellulose-based Nanocomposite as a Potential Cardiovascular Tissue-Engineered Scaffold", Biomimetics and Biomaterials at iBE: Advancing Biology-Inspired Engineering, Atlanta, GA.

7. Pooyan P., Aidun C.K., Tannenbaum R., Garmestani H. [March, 2011], "Cellulose-based Nanocomposite as a Potential Scaffold in Cardiovascular Tissue Engineering", Annual IPST Executive Conference, Atlanta, GA.

8. Pooyan P., Tannenbaum R., Garmestani H. [March, 2011], "Cellulose-based Scaffold in Cardiovascular Tissue Engineering", Regenerative Medicine: Innovation for Clinical Applications, Hilton Head, SC.

(2009)

9. H. Garmestani, Characterization of Viscoplastic property of multi-phase structures using Statistical Continuum Mechanics, Presented at the 2009, St Thomas, Virgin Islands, USA, January 3-8, 2009

10.H. Garmestani, “The Role of Nano-structure in the Microstructure Design of Fuel Cell Materials”, Presented to The School of Engineering Science at Simon Fraser University on February 9, 2009.

11.H. Garmestani, “Characterization of Viscoplastic property of multi-phase structures using Statistical Continuum Mechanics” 3rd International Joint Conference on Advanced Materials and Design, ISDT 2009 - Integrated Systems, Design and Technology, May11-14, 2009.

(2008)12.H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer)

Materials”, The Mechanical Engineering - Engineering MMM 2008, 4th International Conference, October 27-31, 2008, Tallahassee, Fl

13.H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer) Materials”, The Mechanical Engineering - Engineering Department of Advanced Materials and Nanotechnology, College of Engineering, Peking University, Beijing 100871, June 3rd, 2008

14.H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer) Materials”, March 26th 2008, Invited talk at University of New Mexico,

15.H. Garmestani, “Effect of Deformation History on Magnetic Processing of Materials”, May 12, 2008, Presented to IMAP3 Tokeo, Japan,

16.H. Garmestani, “Effect of magnetic texturing on diamagnetic and paramagnetic materials”, , Presented to ICOTOM (15th International conference on Texure, Pittsburgh, May 1, 2008 .

17.H. Garmestani, Microstructure Design using Statistical Correlation Functions, Presented to First AAM 2008 Conference, in New Orleans, June 2008 (Key Note Talk),

18.H. Garmestani, The Role of Nano-structures in Microstructure Design of Solid Oxide Fuel Cells, Presented to the 2nd International Conference on Advanced Nano Materials, June 22nd -25th 2008, Aveiro, Portugal A.

19.H. Garmestani, “Microstructure Design of Solid Oxide Fuel Cell Materials”, Presented to the conference on Knowledge Management in Composite Materials (KMCM), Vancouver, Ca, June 30th, 2008.

20.H. Garmestani, “The Role of Nano-structures in Microstructure Design of Solid Oxide Fuel Cells”, Presented to the Michigan Tech University as part of the Mechanical Engineering department seminar series. Michigan Tech,. October 8, 2008.

21.H. Garmestani, “Homogenization relations for multiscale modeling of materials”, Presented to MMM conference in Tallahassee, Fl,. October 26, 2008.

22.H. Garmestani, “Wear resistance and Texture Evolution of ultra high molecular weight polyethylenes ”, Presented to Third International Conference on Polymer Behavior. Marakesh, Morocco, November 11, 2008.

(2007)

23.H. Garmestani, D. Li, M. Khaleel, “Microstructure Design of Solid Oxide Fuel Cell Materials”, Presented to the conference on Knowledge Management in Composite Materials (KMCM), Dusseldorf Germany, July 3-6, 2007.

24.H. Garmestani, G. Vialle, D. Li “Multi-Property Microstructure and Property Design of Magnetic Materials”, MPD-5 Cornell University, July 18-20, 2007,

25.H. Garmestani, “Hart’s Model and Its applications”, for Rivlin, Nabarro, Hart in Thisoluniki, Greece, April27-May1st .

26. “Soft Magnet Multi Property Microstructure Design”, D. Li. H. Garmestani, G. Vialle, The 13th International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska,

27. “Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design”, D. Li. H. Garmestani, G. Vialle, The 13 th

International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska,   

28.H. Garmestani, Microstructure Sensitive Design of Fuel Cell Materials. Auguest 2nd: Invited talk at PNNL  

29.H. Garmestani, D. S. Li, …Structure of Polymer Conference in Strasbourg, France: Effect of Texture of Wear properties of High Density PolyEthylene., October 10.

30.H. Garmestani, “Microstructure sensitive Design of Fuel Cell Materials”, for Craig Hartley Honorary Symposia, TMS Meeting in Orlando (February 26-28).

31.H. Garmestani, D. S. Li, “Process Path Modeling of Textured Polycrystalline Materials”, TMS Meeting in Orlando (February 26-28).

32.H. Garmestani, S. S. Park, E. Lee, “Processing of AA6xxx materials for Superplastic Properties”, TMS Meeting in Orlando (February 26-28):  

33.D. Sheng Li, H. Garmestani, “Microstructure Design for Wear Properties Optimization –application to bone implants” TMS Meeting in Orlando (February 26-28):  

34.H. Garmestani, Microstructure Sensitive Design of Fuel Cell Electrolyzer Materials” March 8th: Invited Talk at Idaho National Lab.

35.H. Garmestani, D. S. Li, G. Vialle, Army Solid Mechanics conference (April 4th): “Microstructure Design of Soft Magnet Materials”

36.H. Garmestani, “Fuel Cell Design and Statistical Correlation Functions as a Tool for Microstructural Design”, Presented to Universite Louis Pasteur, Department of Mechanical Engineering, June 27th, 2006.

37.Microstructure and Mechanical Properties of Rolled Sheet and Forged Block Gamma-Titanium Aluminides: Russell J. Foon; Julius De Rojas1; Sun Hyung Kim; Nicole Sporer1; Richard Clark; John Ogren; Omar Es- Said1; Kyle Mori; Elizabeth Villalobos1; Hamid Garmestani; Dongsheng Li; Gopal Das; Titanium Alloys for High Temperature Applications - A Symposium Dedicated to the Memory of Dr. Martin Blackburn: Titanium Based Intermetallic Alloys for High Temperature Applications – Gamma, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006

38.Processing Path Design and the Integration of Texture and Micro- Texture Evolution: Hamid Garmestani Amiya Mukherjee Symposium on Processing and Mechanical Response of Engineering Materials: Modeling of Material Behavior Sponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Shaping and Forming Committee, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006

39.H. Garmestani, “Statistical Distribution Functions for Multi-Scale Design of Materials”, Presented to University of Luxembourg and Henri Tudor Research center, June 23rd, 2006.

40.H. Garmestani, “Statistical Correlation Functions as a Tool for Microstructural Design”, Presented to Northwest Consortium for Multiscale Mathematics and Applications Multiscale Modeling of Materials: Mathematics and Computation May 25-30, 2006. University of Puget Sound, Tacoma, WA.

41.Microstructure Design Using Statistical Correlation Functions”, Presented to Oak-Ridge National Lab, March 22, 2006.

42.H. Garmestani, “Microstructure Sensitive Design of Fuel Cell Materials Symposium for Microstructure Sensitive Design in Madras, Chennai, India, December 1-6, 2005.

43.H. Garmestani, “Microstructure Design Using Statistical Correlation Functions”, Mathematisches Forscchungsinstitut Oberwolfach, January 22-January 28 th, 2005.

44.B. Z. Cui , K. Han , H. Garmestani , N. M. Dempsey , J. P. Liu , H. J. Schneider-Muntau, “Magnetic Properties of FePt and FePtAg Nanostructured Magnets by Cyclic Cold Rolling”, 50th MMM Conference (10/30/05-11/03/05), San Jose, California

45.C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, “High Magnetic Effects on Texture of Grain-Non Oriented Silicon Steel”, Proceeding of the 1st International Conference on Diffusion in Solids and Liquids. DSL-2005, July 6-8, University of Aveiro, Aveiro, Portugal.

46.H. Garmestani, D.S. Li, J. Bouhattate, S. Ahzi, and M. Khaleel, Processing Path Model to Describe Texture Evolution During Mechanical Processing, Proceeding of the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.

47.H. Garmestani, ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.48.M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on

the Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of the 16th International Plansee Conference on Refractory Materials (May 2005).

49.M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on the Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of the 16th International Plansee Conference on Refractory Materials (May 2005).

50.H. Garmestani, Use of Two Point Statistical Correlation Functions in inverse Methodology for Materials Design”, Presented to the DOE workshop in Multi Scale Mathematics, Portland Oregon, September 21-24, 2004

51.G. Saheli, H. Garmestani, A. Gokhale, “Effective Elastic Properties of an Al-SiC Composite Using Two-point Statistical Mechanics Approach”, The 8th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2004, June 13-17, 2004, Ohio Sate University, US

52.B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal and Nanostructure Refinement in Magnetically Annealed Nd2Fe14B/a-Fe-type Nanocomposites, accepted by the 49th MMM Conference and will appear on JAP, 2005.

53.B. Z. Cui, k. Han, h. Garmestani , h. J. Schneider-muntau, j. H. Su, j. P. Liu, enhancement of the material properties by magnetic field assisted phase

transformation, International Workshop on Materials Analysis and Processing in Magnetic Fields Tallahassee, FL, March 2004, in press.

54.B. Z. Cui, K. Han, H. Garmestani, H. Schneider-Muntau, J. P. Liu, ¡°Nanostructure, Crystallographic Texture, Exchange Coupling, In-plan Magnetic Anisotropy and Hard Magnetic Properties of Nd2Fe14B/a-Fe-type Nanocomposites Prepared by Magnetic Annealing¡±, DARPA MetaMaterials PI Review (abstract), Colorado Springs, CO, USA, August 4-7 (2003) Part II, p11.

55.B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal, Nanostructure Optimization and Magnetic Property Enhancement in Magnetically Annealed Nd2Fe14B/-Fe-type Nanocomposites, Proceeding of 2004 MMM conference.

56.D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient during Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7, Published by NEAT Press, 2003, 487-489

57.G. Saheli, A. Belvin, H. Garmestani, and B. L. Adams, “Microstructure sensitive design for a two-phase composite material”, PLASTICITY 2003, July 7-11, 2003, Quebec City.

58.D.S. Li, H. Garmestani. A Linear Model of Processing Path in Cubic-Orthotropic System. Multiscale modeling and characterization of elastic inelastic behavior of engineering materials, Published by Kluwer, Eds: S. Ahzi et al., 2003, pp. 307-314

59.D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced Materials, Oct. 2003.

60.D.S. Li, H. Garmestani. Modeling of Processing Path in Processing of Titanium. Proceedings of International Light Metals Conference 2003.

61.H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase composites”, 7th US National Congress on Computational Mechanics at Albuquerque, New Mexico, July 27-31, 2003.

62.D.S. Li, H. Garmestani. Processing Path of Crystal Orientation Coefficient during Plastic Deformation. Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7, Published by NEAT Press, 2003, 487-489

63.Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)₂(Fe,Co,Mo)₁₄B/[[alpha]] Fe Nanocomposites ID: TMAG-03-10-0233, MMM conference, 2003

64.BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, ID: TMAG-03-10-0248, 2003

65.H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, September 4-6, 2003.

66.C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D. Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.

67.G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the THERMEC’2003 Conference – Madrid, Spain - July/03

68.G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - Proceedings of the TI-2003, 10th International Conference in Titanium, Hamburg, Germany – July 2003

69.G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium Name: General Abstracts 2003, Chicago, Illinoys, November 2003

70.G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T '03: Materials Science & Technology 2003- Symposium:Processing and Properties of Structural Materials,Chicago, Illinoys, November 2003

71.C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium: Processing-Structure-Property-Performance Relationships,Chicago, Illinoys, November 2003

72.Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling two-point correlation functions, PLASTICITY 2003, Quebec City July 7-11

73.H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec City July 7-11

74. “Microstructure Representation and Optimization Using Statistical Continuum Approaches”, Presented to the weekly department seminar at University of Texas in Dallas, Texas on December 19, 2002.

75."Modeling of Residual stress in two phase composites", H. Garmestani, M. Haik, G. Jefferson, TMS Annual Meeting, Columbus, Ohio, October 6-9th, 2002.

76. “Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference in Morocco, October 20-24th, 2002, Marakesh, Morocco

77. “Advanced Processing and Characterization for Texturing of Materials”, Presented to Materials Science and Engineering at Drexel, January 28, 2002.

78.H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of heterogeneity using strain energy, Plasticity Conference in Aruba, January 3-9, 2002.

79.B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals”, TMS conference on Microstructure Modeling and Prediction During Thermomechanical Processing, Edited By: Raghavan Srinivasan, S. L. Semiatin, Armand beaudoin, Steven Fox, Zhe Jin, Held November 4-8, 2001, Indianapolis, Indiana.

80. “Statistical Mechanics Modeling of Polycrystalline Materials”, Presented to the Mechanics and Materials Conference in SanDiego, June25-28, 2001.

81. “Spectral And Statistical Mechanics Representation Of Microstructure Evolution” Presented to Wright Patterson Laboratory, Materials Division, May 24th 2001, (invited)

82. “Advanced Processing and Micro-characterization Techniques for the Production of Highly Textured Nano-powdered Magnetic Materials”, Presented to NASA Langley Research, Newport News, May31, 2001. (Invited)

83.“Evolution Of Texture And Anisotropy in Al-2090 Precipitation Hardening Alloys”, Presented to the Second International Conference on Light Materials, Busan, Korea, May 6-9, 2001.

84.“Microstructure Sensitive Design”, Presented to the Second International Conference on Light Materials, Busan, Korea, May 6-9, 2001.

85.“Residual Stress in Thin Films of Strontium-Doped Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco, CA

86.“Statistical Continuum Theory for Inelastic Deformation of a Polycrystalline Medium”, H. Garmestani, S. Lin, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

87.“Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

88.“Residual stress development during fabrication and processing of Gamma Titanium based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

89.“A phenomenological model for superplastic materials”, H. Garmestani and F. Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

90. “Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading and Relaxation”, H. Garmestani, Presented at the sepecial Symposium to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

91.Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

92.“Mechanical and Microscopy Analysis of Carbon Composites during high Temperature Application”. Shahawy, H. Garmestani, C. Goins, M. AlHaik, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas

93. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, M. Li, E. Gillman, K.-H. Dahmen, X. Dong , L. Brandao, H. Garmestani, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

94. “Statistical Continuum Theory for Microstructure Evolution of an Inelastic Heterogeneous Medium”, Invited talk at the Mutiscale Modeling of Materials Organized by the Institute of Materials and the National Livermore Lab. April 9-11, 1997. SanDiego California.

95. “State Variable Modeling of Relaxation and Cyclic Loading”, Presented at the National Instititute of Standards and Technology, July 18, 1997.

96. “Texture and Micro-texture Characterization of Advanced Materials”, Presented to The Materials Lab of the Naval Research Lab of Naval Air Warware Systems at Putaxent River, Maryland, July 29, 1997.

97. “A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco, Proceedings of the NASA University Research Centers, in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, (1997). .

98. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, M.L. Weaver and H. Garmestani, in NASA ACE Center Series: Proceedings of the NASA University Research Center

Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, (1997). .

99. “Microstructural Characterization of Al8090 Superplastic Materials Using Orientation Imaging Microscopy“, Presented at the Microscopy Society of America Meeting in Kansas City, August 13-17, 1995.

100. “High Temperature Low Cycle Fatigue Analysis of Composite Materials”, Presented at the Second International Conference on Composite Engineering, Aug. 20-24, 1995.

101. “Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in Inhomogeneous Materials”, Presented at the Second International Conference on Composite Engineering, Aug. 20-24, 1995.

102. “Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H. Garmestani, D. Markiewics, I. Dixon, Presented at the Second International Conference on Composite Engineering, Aug. 20-24, 1995.

103. “Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”, M. R. Vaghar, H. Garmestani, Presented at the Second International Conference on Composite Engineering, Aug. 20-24, 1995.

104. “Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”, H. Garmestani, P. Kalu, D. Dingley, Presented at the Light Weight Alloys for Aerospace Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995.

105. "Micro-Mechanical Characterization of AlLi-8090 Superplastic Material", H. Garmestani, P. Kalu, K. Mehr, J. Kuhlhof, N. Chandra, The annual conference of the Materials Society (TMS) in Las Vegas, February 12-17-1995.

106. "Investigation of Residual Stress Development during processing of Ti47Al2Ta matrix composite materials", H. Garmestani, T. Townsley, The annual conference of the Materials Society (TMS) in Las Vegas, February 12-17-1995.

107. "Mechanical and Micro-texture evolution of Al-Li Superplastic Materials", H. Garmestani, K. Mehr, P. Kalu, N. Chandra, International Conference on superplasticity, Manchester, England, December 2-5th, 1994.

108. "Statistical Continuum Theory For Inelastic Behaviour of A Two-Phase Medium", H. Garmestani, Proceedings of the 14th IMACS (International Association for Mathematics and Computers in Simulation), World Congress on Computational and Applied Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994

109. "Experimental and Numerical Investigation of Superplastic Forming", N Chandra, H. Garmestani, International Conference on Superplasticity in Advanced Materials, ICSAM'94, May 24-26, 1994, Moscow, Russia

110. "Microcharacterization of Aluminum Based Fiber Reinforced Composites," H. Garmestani S. Mukherjee, M. Ebrahimi, N. Chandra, Presented at the TMS Fall meeting of The Minerals, Metals, & Materials Society and ASM International, Pittsburgh, PA, October 17-21, 1993

111. "Effect of Moisture and Temperature on the Compressive Response of Woven Composite Laminate," J. King, N. Chandra, R. Rai, K. Murali, H. Garmestani, Presented at the TMS Fall meeting of The Minerals, Metals, & Materials Society and ASM International, Pittsburgh, PA, October 17-21, 1993

112. "Effect of Interfacial Properties on the Transverse Mechanical Behavior of Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N. Chandra, K. Murali, H. Garmestani, Presented at the TMS Fall meeting of The

Minerals, Metals, & Materials Society and ASM International, Pittsburgh, PA, October 17-21, 1993

113. Microstructural Failure Analysis Studies in Metal Matrix Composites Using The Backscattered Kikuchi Diffraction Technique" H. Garmestani, M. Ebrahimi, and N. Chandra, Presented in Fourth International Conference on Structural Failure, Product Liability and Technical Insurance, Vienna, Austria July 6-9, 1992.

114. "Finite Element Approach to Evaluation of Residual Stress in Metal Matrix Composites", C.R. Ananth, N. Chandra, and H. Garmestani, Presented in the 28th Annual Technical Meeting of the Society of Engineering Science, November 6-8, 1991.

115. "Elastic-Plastic Fatigue Analysis of a Structural Joint Using Experimental and Computational Methods", N. Chandra, H. Garmestani, V.S. Rao, and M. Shahawy, Presented in the 28th Annual Technical Meeting of the Society of Engineering Science, November 6-8, 1991.

116. "Measurement of Local Strain in Metal Matrix Composite Interfaces Using Backscatter Kikuchi Diffraction Technique", H. Garmestani, M. Ebrahimi, N. Chandra, Mechanical Alloying/Composites, 120th TMS Annual Meeting, New Orleans, Louisiana, February 17-21, 1991.

117. "Evolution of Statistical Measures of a two phase Medium", H. Garmestani, B.L. Adams, Fall Meeting of The Materials Society (TMS) Composite Materials Meeting, November 1990.

118. "Controlled Inelastic Strain Rate Experiments", H. Garmestani, E.W. Hart. 1988 Fall Meeting of American Society of Metals, The Metallurgical Society (ASM-TSM), Chicago, September 24, 1988.

119. "Biaxial Small Strain Yield Behavior in Single Phase Metals", R.K Raghavan, B.L. Adams, H. Garmestani, Fall Meeting of the TMS Shaping and Forming, Detroit, Mi, September 19, 1984.

120. "Biaxial Small Scale Yield Behavior Of Textured Copper Tubing With Anelastic Recovery", H. Garmestani, B.L. Adams. 1983 Fall Meeting of the Mechanical and Physical Metallurgy Society, Philadelphia, September 1983.

Editorial Responsibilities:

1- Associate Editor of Mechanics of Materials2- Member of the editorial board of the International Journal of Plasticity3- Associate Editor for the International Journal of Engineering Materials and

Technology4- Member of the editorial board of the Metallurgical and Materials Transactions (until

2007).5- Editorial Board of Computers, Materials and Continua 6- Editorial Board of Theoretical and Applied Multi-scale Modeling of Materials.

Conferences Organized2009:

1- Conference Chair for the fourth international workshop on Materials Analysis and Processing in Magnetic field in May 2010: www.map4.gatech.edu.

2- Conference Chair for Organized the TMS- Microstructure Characterization, Analyses, and Design in October 2009

3- Co-Organized the Integrated Systems, Design and Technology (ISDT)- Conference Program in Ankorage, Alaskam May 11-14, 2009)

4- Organized a symposium on Materials Design as part of : PLASTICITY 2009, St Thomas, Virgin Islands, USA, January 3-8, 2009

2008:5- Organized a symposium on Materials and Microstructure Design as part of

PLASTICITY 08, Keauhou Bay Resort, Kailua/Kona 6- Co-Organized the First International Conference on Laser Peening (15th-17th

December, 2008) Houston-Texas, USA 7- Organized a session on Magnetic Texturing of materials as part of the 15th

International Conference on Textures of Materials (ICOTOM 15), 1-6 June 2008 • Carnegie Mellon University Center • Pittsburgh, Pennsylvania

2007:8- Organized the Materials and Microstructure Design symposium Microstructure and

Materials Design as part of Plasticity 07, Alaska, June 2-6, 20079- Organized the Hartley Honorary Symposia on Mathematical Modeling of Materials

and Microstructures...  At TMS, Annual meeting in Orlando February 26-28, 200710- Co-organized THE 1ST WORLD MATERIAL MECHANICS SYMPOSIUM” in

Thessaloniki, Greece (April 29-May 1st, 2007)” in the honor of Frank Nabarro, Ed Hart, Ronald Rivlin

2006:11- Organized a symposium on “Brent Adams” Honorary Symposium on

Homogenization Techniques and Microstructure Design and Characterization as part of the International Plasticity conference in Halifax, Nova Scotia (Canada), July 17-22, 2006

2005:12- Organized a Symposium on Materials and Microstructure Design as part of the

International Conference on Computational and Experimental Engineering and Sciences December 1-6, 2005, Indian Institute of Technology Madras, Chennai. INDIA

13- Challenges in Designing Materials as part of the Eleventh International Symposium “Plasticity 2005” in the island “Kauai", Hawaii, during Jan. 4-8, 2005.

2004:14- Organized the Materials Design Conference in 2004 at Georgia Institute of

technology. 15- Organized the symposium on “Materials By Design” in International Journal of

Plasticity conference in Aruba, January 2002.16- Co-organized the mini-school on materials by Design at Drexel, December 2002.17- Organizing committee for the Society of Engineering Sciences (97,99)18- Organizing committee for the International Committee of Plasticity (99)19- Organizing committee for the International Composite Engineering Committee20- Member of the International Composite Committee of TMS21- Organized a Superplasticity Conference in Chicago TMS Conference, Nov. 2-5,

1992.22- Organized the Symposium on Failure Mechanisms in Heterogeneous materials,

ASME Fall, November 1996, Atlanta, Georgia23- Organized the Symposium on Phenomenological Modeling of Inelastic Materials,

The sixth International Symposium on Plasticity, Alaska., Sept 1997

24- Organized a symposium as part of the Society of Engineering Sciences in Portland Washington to honor Hart’s 80th Birthday., Sep. 1998

25- Organized a Symposium on Mechanics of Heterogeneity, the Seventh 26- Frequent Panel reviewer for NSF Mechanics and materials (Feb 2000)27- Reviewer for International Journal of Solids and Structures28- Reviewer for Journal of Composite Science and Technology

Honors:Awarded “Superstar in Research” by FSU-CRC in year 2000.Recipient of the 2000 Engineering Research Award of the FAMU-FSU College of Engineering, Spring 2001.NASA Faculty Award for Research in 1996.

UNIVERSITY RESPONSIBILITIES:Member of the MARTECH advisory committee.Member of the Mechanical Engineering Curriculum Committee.Member of Mechanical Engineering Laboratory Committee. Chair of the MARTECH Seminar Committee.Served as a member of the search committee for NHMFL (1992-1993), 1997. Served as a member of the MARTECH search committee (1993-1995).

AFFILIATIONS:The Materials Society (TMS)American Society of Metals (ASM INTERNATIONAL)Materials Research Society (MRS)American Society of Testing of Materials (ASTM)American Society of Mechanical Engineers (ASME)Society of Engineering Sciences (SES)

TEACHING EXPERIENCE:

Florida State University (Mechanical Engineering)Fall 1990 Mechanics of Materials (Undergraduate)Spring 1991 Advanced Mechanical Metallurgy (Graduate)Spring 1991 Experimental Methods in Solid Mechanics Fall 1991 Mechanics of Materials (Undergraduate)Fall 1991 Continuum Mechanics (Graduate)Spring 1992 Theory of Plastic Flow and Fracture (Graduate)Spring 1992 Experimental Methods in Solid Mechanics and MaterialsFall 1992 Design of Machine Elements (Undergraduate)Fall 1992 Mechanics of Materials (Undergraduate)Spring 1993 Experimental Methods in Solid Mechanics and MaterialsSpring 1993 Theory of Elasticity (Graduate)Fall 1993 Design of Machine Elements (Undergraduate)Fall 1993 Crystal and Visco-plasticity, Texture analysis (Graduate)

Spring 1994 Theory of Elasticity (Graduate)Spring 1994 Experimental Methods in Solid Mechanics and MaterialsFall 1994 Design of Machine Elements (Undergraduate)Spring 1995 Theory of Elasticity (Graduate)Spring 1995 Mechanics of CompositesFall 1995 Design of Machine ElementsSpring 1996 Theory of ElasticitySpring 1996 Mechanics of TextureFall 1996 Experimental Methods in Solid Mechanics and MaterialsFall 1996 Theory of Plasticity and InelasticitySpring 1997 Theory of Elasticity (Graduate)Spring 1997 Mechanics of Composites (Graduate)Fall 1997 Continuum Mechanics (Graduate)Fall 1997 X-ray Diffraction (Graduate)Spring 1998 Experimental Methods in Solid Mechanics and MaterialsSpring 1998 Mechanics of Composites (Graduate)Fall 1998 Experimental Methods in Solid Mechanics and MaterialsFall 1998 Continuum Mechanics (Graduate)Spring 1999 Mechanics and Materials-I (Undergraduate)Spring 1999 Texture (Graduate)Summer 1999 Mechanics and Materials-I (Undergraduate)Fall 1999 Mechanics of Materials- II (undergraduate)Fall 1999 Statistical Continuum Mechanics-I (Graduate)Spring 2000 Mechanics and Materials-I (Undergraduate)Spring 2000 Texture (Graduate) (Graduate)Spring 2000 Statistical Continuum Mechanics-II (Graduate)Summer 2000 Mechanics and Materials-I (Undergraduate)Fall 2000 Composite Materials (Graduate)Fall 2000 Experimental Methods in Solid Mechanics and MaterialsFall 2000 Special Topics in Magnetic Materials (Graduate)Spring 2001 X-ray Diffraction (Graduate) at GATECH and FSUFall 2001 Theory of Plasticity and DamageSpring 2002 Micro-characterization of Materials (Texture)

Georgia Institute of Technology:Spring 2002 Diffraction Studies (at Georgia Tech)Fall 2002 Materials Characterization (at Georgia Tech)Fall 2002 Continuum Mechanics (FSU)Spring 2003 MSE 6105 X-ray diffractionFall 2003 MSE 6105 X-ray DiffractionSpring 2004 MSE2020 -Characterization of Materials Fall 2004 MSE 2001 –Materials Science and EngineeringSpring 2005 MSE 8803 –Electron and X-ray AnalysisSpring 2005 MSE 2020 -Characterization of MaterialsFall 2005 MSE 8503 –Statistical Continuum MechanicsFall 2005 MSE 2001 –Materials Science and EngineeringSpring 2006 MSE 2020 - Characterization of Materials Spring 2006 MSE8803 –Scattering and Micro-Diffraction

FUNDINGPresent

Agency Title of Grant Date(s) Total Amount

DOD, PI (sub-contract through University of New Mexico)

Next Generation Structural Composites Using Surface Grown Carbon Nanotubes

2/2008-2/2011

$310,600

Pacific Northwest National Lab, PI

Inverse Methodology for Materials Design

1/2008-12/2010

$60,000/year

IPST Fabrication of Super Nanopaper by Designing of Nanocellulose with Desired Supermolecular

Structure

2009- One graduate student funding

Pacific Northwest National Lab, PI

Microstructure Sensitive Design in Sealant Materials for Fuel Cells

September, 2007-2008

$53,000/year

NSF, Co-PI Industry/University Cooperative Research

Center on Computational Materials Design (CCMD), (PI: David McDowell)

2004-2006 $38k

DOE, PI Microstructure Sensitive Design and Processing in Solid Oxide

Electrolyzer Cell

2006-2009 $570,000

NASA Langley

MicroCharacteriation of Stir Welded Materials (Joint with Dr.

Singh)

2007-2008 $8,700

Pending

Title of Grant Agency % Date(s) Total Amount

Modeling Laser Peening and Shot Peening of Precipitation Hardening Steels to Improve Their Mechanical and Corrosion Behavior

NSF (Co-PI, Dr. Preet Singh, Ph.D. as the PI)

50% 7/2008- $520,000

Microstructure Sensitive Design of Fuel Cell structures

NSF 100% September, 2007-2008

$410,000 for three years

LaFarge Failure Analysis of

Kiln Materials (Joint with

Preet Singh)

2007-2008

$14,000 LaFarge

Investigation Of The Mechanisms Of Magnetic Texturing

DOE 100% July, 2008-2013

$620,000 for three years

On the role of a magnetic field during heat treatment on textured growth of Ag/Bi2Sr2CaCu2Ox composites

NSF (co-PI), (J. Schwartz as the PI from FSU)

40% July, 2008-2011

$570,000 for three years

SOFC Sealant Material Design and Optimization

NSF 100% July, 2008-2011

$502,000 for 3 yrs.

Multiscale Modeling and Validation of Interfacial Structure in Polymer Nanocomposites

NSF (Co-PI, PI: R. Tannenbaum)

~20%

08/01/08 $1,106,297

Materials World Network on Microstructure Design of UHMWPE Materials

NSF/FNR Joint with Luxenbourg Institute

50% 07/01/08 697k for 3yrs

LaFarge Failure Analysis of

Kiln Materials (Joint with

Preet Singh)

2007-2008

$14,000

NASA Langley MicroCharacteriation of

Stir Welded Materials (Joint with Dr. Singh)

2007-2008

$8,700

(2002-2005):Agency Title of Grant Date(s) Total

AmountNSF, -Co-PI REU with Loyola Mary Mount

University2004-2006 $300,000

Pacific Northwest National Lab

Microstructure Sensitive Design in Fuel Cell

January, 2005

$50,000

NSF, PI Collaborative to Integrate Material Science and Engineering Research and Education, NSF Grant # DMR-9982872

1999-2002 $1,551,000/3yrs

NSF, PI Cooperative Grain Boundary Sliding and Heterogeneities of Grain Boundary Character Distribution in Superplastic Materials,

2001-2004 $430,000/3yrs

DOD-Army, PI(Single)

“High Field Thermo-magnetic Texturing of magnetic Materials”, (9/2001-11/2004).

2001-2004 $870,826/3yrs

NSF, co-PI Acquisition of High Temperature Atomic Force Microscope

2000-2003 $210,000

Army Lab, PI Processing Path for Optimum Texture for Titanium-1100

2002-2003 $50,000

MARTECH, FSU

Texturing and Mechanism of Deformation in Semi-Crystalline Polyethylene Materials, Center for Materials Research and Technology,

2002-2003 $25,500

NASA, Center for Nonlinear Phenomena in Aerospace Materials and Structures.

Contact # NAGW-2930,

1999-2003 $1,000,000/yr

$210,000/yr

FSU, Co-Pi Center for Application of Nanotechnology in Micro Total Analysis Systems (CANmTAS)

2002-2003 $125,000.00

AFOSR, Pi Statistical Mechanics Analysis of Microstructure Evolution and Texture in Ti-6Al-4V

2003-2005 $300,000 for 3 years

AFOSR, co-Pi Microstructure Sensitive Design April 2004 $30,000

Workshop

Durip, Co-PI An Integrated Experimental-Computational System For Incorporation

May 2004 $160,000

FUNDING DURING 94-2002:Army Office of Research (ARO), “High Temperature High Field Characterization of textured materials”, contract #37-1906-118, 1992-2002, $220,000/3 yrs!

National Science Foundation Acquisition of a Scanning Transmission Electron Microscope, Division of Materials Research, Instrumentation Program (co-PI, 1996-99), $301,871, DMR-0109535 Prior Award No: 9625692Organization of Naval Research, “Field biasing and thermal stabilization of La-Manganite magnetoresistive thin films”, $2,000,000. Contract ONR-N00014-96-1-0767

NASA , “Plasma Cast Overflow to process Titanium sheet”, Contract # NAG-1-1866, $310,000 for 3 years 1977-December 99. PI: H. Garmestani,

Department of Transportation "High Temperature Investigation of structural Composites", $50,000. PI: H. Garmestani, May 1995, December 1995., (Started on Dec. 24, 1995).

NASA, "Center for Nonlinear Phenomena in Aerospace Materials and Structures", January 1 1992-December 31 1996. Contact # NAGW-2930, PI: H. Garmestani.

National Science Foundation, "Interactions Between Bulk Hg-Ba-Ca-Cu-O Superconductor and Metals", $722,367. 1/01/95 to 12/31/97. PI: J. Schwartz.

National High Magnetic Field Laboratory "Experimental and theoretical Analysis of a high field magnet, $35,000. PI: H.Garmestani.

National Science Foundation "Micro-Mechanical Characterization of Metal Matrix Composites", $285,630. PI: Prof. N. Chandra, Co-Pi: Prof. H. Garmestani, November 1991-November 1994. Contract #HRD-9113351

CONSULTING EXPERIENCE:

Gould Lewis and Proctor Consulting, Engineer, Gainesville, Florida,Summer, and Fall 1983. Department of Transportation, Consultant, Tallahassee, Fl. 1993-1999.Nasa langley research Center, 2000Benedict Engineering Co. Inc., Consultant, Tallahassee, Fl. Spring 1994.Tala Com., Consultant, Tallahassee, Fl. Spring 1994.

Collaborators:D. Markiewics (NHMFL)Ke Han (NHMFL)Schneider Muntao (NHMFL)S. Nourbakhsh (Univ. of NY)M. Kaufman (Univ. of Florida)R. Abbschian (Univ. of Florida)

` Brent Adams (BYU)Omar Es-Said (Loyola Marymont University)E.W. Lee, (Naval Research Lab)

GRADUATE THESIS SUPERVISED (Major advisor, Current)

1. Gregg Vialle (GATECH, Ph.D.), Microstructure Design and Processing of Inducture Choke Ferrites for Magneto-elasticity and Magnetostriction.

2. Samuel T. Adedokun (Ph.D. at FAMU)., Optimization of Microstructure and Grain Boundary Character (Texture and Micro-Texture) Of Aluminum 6xxx Using magnetic Annealing

3. Jackie Milhans, (Ph.D.) Microstructure Design of Sealant Materials for Solid Oxide Fuel Cell Materials

4. Hoda Amani (Ph.D.), Synthesis Techniques Based on Spray Pyrolysis for the production of Large Surface Area Solid Oxide Fuel Cell Electrolyzer

5. Brad Fromm (Ph.D.)

(Major advisor, Completed) (25)Ph.D: (6 minority, 6 females, 5 African American)

1. Samuel Adedokun (FAMU, Ph.D.-08), Magnetic processing of Aluminum 6xxx

2. Erin Camponeschi. (GATECH, Ph.D.-07), Synthesis and characterization of Oriented Nano-tube Composites

3. Jamaa Bouhattate(2002-2006), Modeling texture evolution in polycrystalline materials using spherical harmonics

4. Reesheman Burell (2000-2006), Mechanical Property Response On Textured Ultra High Molecular Weight Polyethylene (UHMWPE)

5. Gail Jefferson (2000-2006), Two-Point Probability Distribution Function Analysis Of Nano-Composites.

6. Ghazal Saheli (9/2000-4/2006), (GATECH), Homogenization Relations for Elastic Properties Based on Two-Point Statistical Functions

7. Gilberto Alexander Castello Branco (Ph.D), (1999-2004), ThermoMechanical Processing of Titanium

8. Anthony Belvin (Ph.D. 2000-2005), Texture Effects on the Ductile Fracture and Deformation Behavior of Polycrystalline Nickel

9. Cristiane Maria Basto Bacaltchuk (1999-2004), Magnetic Processing of Fe-Si

10.DongSheng Li (5/2002) TextureEvolution of Polyethylenes During Uniaxial Tension

11.Marwan Al Haik (Ph.D. 12/2002), Neural Network analysis of life prediction12.Shinguang, Lin, (Ph.D. 8/98) "Statistical Mechanics Analysis of a

Heterogeneous medium".13.F. Booeshaghi (Ph.D., June 1997, from FSU) “Superplasticity”14.Vaghar, Reza. (Ph.D. 7/96) "Green’s Function Solution for the Stress

Analysis of a Superconducting Magnet"

Masters: (7 minority, 7 females, 5 African American)1. Antoine Berret, (11/2005), Morphologic Influence Of High Magnetic Fields

On The In-Situ Mocvd (Metal Organic Chemical Vapor Deposition) Of Xylene-Ferrocene Nanotubes And Structures

2. Michelle Adams (MS 2003)

3. Xin Dong (M.S. 8/99) “Microtexture Characterization of thin film materials”4. Lathanza Williams (M.S. 1/2000))5. Enga Wright (M.S 5/99) “Microcharacterization of cast overflow process”6. Sharon Jones (M.S. 9/99)7. Neil Bednar (M.S. 5/98)8. Kuhlhoff, J. (M.S. 6/95) "Investigation of Mechanical properties of

superplastic materials".9. Cox, A. (M.S. 5/95)" Biaxial failure analysis of Superconducting solenoids".10.Murphy, P. (M.S. 1/95) "Biaxial analysis of PMC Composites".11.Mehr, K. (M.S. 1/95) "Micromechanical Characterization of Al-Li superplastic

materials".12.Townsley, T. (M.S. 8/95) "Residual stress analysis of Ti-48Al-2Ta

composites"13.Sohi, G. (M.S. Dec. 1993) "Evolution of Misorientation Distribution Function

for Superplastic Materials" 14.Vaghar, Reza. (M.S. 5/93) "Elastic-Plastic analysis of high Field

superconducting Solenoid"15.Ebrahimi, Masood (M.S. 5/93) "Residual stress measurement in materials

using Backscattered Kikuchi and x-ray Techniques".

Post-Doctoral, Research Associates and Technical Staff (Present):

Klaus Dahmen, Visiting Professor, (2003- present)

(Past)1. Jackie Milhans(2011)2. Yoon Oh (2010)3. DongSheng Li, (2002-2010)4. SungSu Park (Pohang University in Korea)5. Bauzhi Cui (2003-2006)6. Askar Sheikali (Ph.D. from Russia) 7. M. Haik (Ph.D. from FSU)8. Madjid Fathi, Visiting Professor (2003-2004)9. ShiShen Yan (Ph.D. from LSU)10.Lamartine Meta (Ph.D. from Northeastern),1998-200111.Shuguang Lin (Ph.D. from FSU)12.Luiz Brandao, Associate Professor of Mechanical Engineering, from Brazil13.Mark Weaver, (Ph.D. from University of Florida)14.F. Booeshaghi (Ph.D. from FSU)15.K. Harris (Ph.D. from Stoney Brooks)

Member of Graduate Committee (Present)

1. Ming Li, Mechanical Engineering2. Arun Sreeranganathan (Advisor: Gokhali)3. Liang Tong (Computer Science)

4. Tao Xu (Advisor: Mo Li) "Computational Study of Microstructure-Property Relations for Mechanical Behaviors in Nanocrystalline Materials"

5. Xiefei Zhang, Polymer, Textile and Fiber Engineering. (Advisor: Dr. Satish Kumar working on Single wall carbon nano-tube based films and fibers)

(Past)1. Ashwin K. Samarao 2011, (ECE), Farrokh Ayyazi2. Craig Pyszla 2010, (MSE), David McDowell3. Dong Yang (Mechanical Enginering), Preet Singh4. Jenine Johnson 2009 (Mechancal Engineering) 5. Mike Haberman 2008 (advisor: Yves Berthelot, and Dr. Mohammed

Cherkaoui)6. Sangil Han, (Advisor:Dr. Melkote, ME)7. Paul Wissman, 2008 (Advisor: Martha Grover Gallivan)8. Harpreet Singh 2008, (advisor: Gokhali)9. Larry Prangler 2008, Advisor Dr. Rina Tannenbum10.Stephanie C. Barthe, 2008, (Advisor: Dr. Ronald W. Rousseau, Martha Grover

Gallivan)11.Martin Lara, 2008, Advisor, Dr. CP Wong, graduated in March 200812.Haejin Choi, 2008 (Mechanical Engineering, Dr. Mistree advisor)13.Vincent Wang, 08 (Advisor: Rosen)14.Laurent Capolungo, 2007 (Jianmin Qu, Cherkawi)15.Vibhor Jain, Dr. Karl Jacob, Ph.D., May 200716.Jeremy D. Walker, 2006 (Advisor: Rina Tannenbaum)17.Jiann-Cherng Su, 2006 (Advisor: Steven Liang)18.Jingping Chen, 2006, (Advisor: Ke Han -FSU)19.Kasi David, 2006 (Advisor: Rina Tannenbaum)20.Krishnakumar Sundaresan, August 2006, (Advisor: Ayazi)21.Babak Vakili Amini, 2006, (Advisor: Dr. Ayazi)22.Raymond Oh (December 2005) , Joe Cochran23.Melissa A. Zubris (2005), Materials science, Advisor: Rina Tannenbaum24.Hongqing Vincent Wang (Fall 2005), Mechanical Engineering, Dr. Rosen25.David Mebane, Fall 2004, (Advisor: Roserio Gerhart)26.Clint Barineau, Department of Geology (2004), Ph.D. 27.Mukherjee, J., (Ph.D. 1996), 28.Crisler, W., (Ph.D, 12/93), 29.Wardrope, C., (M.S. 8/93), 30.Forman F. (Ph.D. 1996), 31.Voleti, R. (Ph.D. 1997), 32.Ananth, C. (Ph.D., 1996), 33.Xie, Z. (Ph.D. 1995), 34.Roy, B. (Ph.D., 1993), 35.Steve Palms (Ph.D. 1998 from Geology), 36.Chun(Cathy) Fan, (Ph.D., 2000 ME), 37.Pan Zheng (Ph.D. 2000 from ME), 38.Ebony Waller, (M.S.,1998), 39.King, Jefrey, (M.S. August 1993), 40.Kartik Iyer (M.S. August 1999),

41.Angela Thomas (MS 2001); 42.David Wariobi, (2003)

Undergraduate Research Students (present):John Ho,

(past): (43 total, 15 female, 20 African American)Andrew Stutsman, Houman Peydaye-saheli (2004-2006), A. Ordonez-Chu (5/2006-8/2006), H. Ahzi (5/2006-8/2006), G. Alapati (5/2006-8/2006), M. Khatonabadi (5/2006-8/2006), Tamrat Alemayehu (1/2006-2/2007), John Ho (2006), Kimani Partin (2006), Sunil Patel (2006), Julie Duryee, (2005), Mikhail Valikhovsky, (2005), Steve Downey (2002-2003), LaQuita Kennon (2001-2003), Andrew Parry (2002), Antoine Berret (2001-2004), Mark Sheer (2002), Barbara Gault (2001), Brandon Toliver (2001), Eyana Smith(00), Ouida Blackwood (00), Graham Cambrice (01), Cherrice Goins (97-00), Jashua Grey (99-00), Loren Rideout (01), Jared Gilmore (Summer 00, visitor from T. University), Mathew Thames (99), Ebony Page (99), Cassande Fountain (99), Terrel Jones (98), Edvin Navarro, Antonio Lee, John Kulhoff, Key Mehr, Ed Dugic, Reda Daher, Keith Kobetich, James Crawford, Thomas Addison, Shawna Osbourn, Tameika Franklin, Victoria Ruohomaki, Candice Henderson, Ivy Williams, Roderick Parker, Lathanza Williams, Miguel Wallace, Pathrick Anderson