C.v. khaled galal new(1)

1

Eng. Khaled Ahmed Galal KhafagaAddress: 61 El-Hegaz st. Heliopolis, Cairo, Egypt

Phone:+2 (02)26374640 Mobile +201006555492 Email: [email protected]

Career ObjectiveSeeking a challenging position and a participation prospect within a professional environment on an organization that offers a career opportunity where personal skills and acquired experience could be usefully utilized and enhanced.

Education and Qualifications-Bachelor of Sciences, Military Technical College, Egypt- June 1995. Major: Mechanical Engineering Grade: Good Graduation Project: Analysis of several kinds of Freon gas for A/C systems

Grade: Excellent

Memberships of Professional Organizations- Egyptian Syndicate of Professional Engineers- Member of American society for non-destructive testing

Training experiences :- Training on the realization of the installation, maintenance, and repair needed for solar systems networks at Media One Group for essential knowledge and skills for green technologies.-Training at TEREX Company in France from 15 Nov till 28 Nov 2012 on Operating and maintenance and repair of TEREX cranes.

Specialized courses:-certificate of Calculating and Designing and operation of photovoltaic cells and modules , at Media One Group for essential knowledge and skills for green technologies., 26 hour 25 / 7 / 2014 till 5 / 11 / 2014- Qualification certificate in non-destructive testing Level 1 & 2 from American society for non-destructive testing (ASNT) by Egyptian welding Academy (EWA).* Ultrasonic inspection for metals and welding defects EWA - NDT - UT - 2015/5955* Radiographic inspection for metals and welding defects EWA -NDT-VT- 2015/6023* Visual inspection for metals and welding defects EWA - NDT - RT - 2015/6002* Penetrant inspection for metals and welding defects EWA - NDT - PT - 2015/6017* Magnetic inspection for metals and welding defects EWA - NDT - MT - 2015/602746 hours from 01/05/2015 until 07/22/2015 .

personal skills:- Ability to work under pressure- Able to take the right decision in difficult circumstances- Able to work in a group or solo - The possibility of the leadership of different work sites to 1500 individual with different scientific qualifications

2

- Competent, sharp, Knowledgeable.- Able to work well with other people and to communicate clearly- Good communication Skills- Accuracy & precision of work- Good problem solving skills

Current Position :Time : From April 2015 until NowEmployer : Elnasr general construction ( Hassan m. Allam )Position : General Manager of maintenance and repair and Mechanical installation Engineering in production workshop - Review and approve production plans in accordance with the objective of production and the possibilities of the workshop and the organization of work.- Supervision and management of manufacturing various types of metallic fences, doors, windows and metal manufactured requirements for construction projects.- Follow-up fixtures at foreign projects for parts manufactured in the workshop.- Supervision of both maintenance and mechanical installation of the central stations to mix concrete- Responsible for the mechanical works for the project of carrier lines for water from the source of the Nile in Maadi , and even downstream in New Cairo.- Supervision of the mechanical installation of special parts (Steel Pipes and Flexible cast iron and GRP, and participants, butterfly and air valves , and metallic ladders ) to 45 inspection chambers and 11 pass-push tunnel along the 33 km with diameters (2600.2200, 1600, 600 mm).* Regulation and supervision of the maintenance and repair valves and air control valves and mechanical aggregates to open and lock valves. - supervise the repair and maintenance of the mechanical parts of the equipment (generators - welding machines - bending machines - cutting iron machines - air compressor Ingersoll - hydraulic tie-down machines until 21000 Nm).- Supervising repair and maintenance in the site for heavy equipment ( Demag & Liebherr winches from 30 to 120 tons - Caterpillar loaders ) .- Review quality tests for mechanical installation operations.- Follow-up examination of welds in a manner of non-destructive tests for metals and welding defects.- review Insulation procedures for metal surfaces of inspection chambers in the project.

.Experience RecordTime : From: Jan 2011 To: June 2014Employer : Egy Armed ForcesPosition chief engineer Responsible of

- Organizing the use of the different types of welding operations.- planning and supervision of the maintenance and repair of equipment and various

vehicles.- Planning for the training of specialists on the realization of practical maintenance of

equipment and vehicles and heavy equipment.- Implementation of training courses for maintenance and repair of all mechanical

fields- Supervise the repair and maintenance of mechanical parts and changing modules.- Design of metal sheets with special shaping .- Supervise the implementation rules of paints insulating coating and resistance to

salinity and humidity and standard tests for coating .

3

- Supervise Remove old paint from the metal surface by abrasive blasters and abrasive mechanically.

- Quality controlling in all operating steps using different gauges to insure optimum operating of pontoon floating units.

- Planning annual and monthly maintenance schedules and distributing of maintenance tasks for engineers and technicians.

- The implementation of supply chain stores planning schedules.- Maintenance and repair of guidance Panels for roads and facilities and hangars.- Repair and maintenance of different kinds of military trucks and heavy equipment's

and hydraulic machines .- Maintenance of different kinds of boilers and kitchen equipment's .- Review daily repair and maintenance reports and decision-making.- Supervision of both maintenance and mechanical installation of the central stations

to mix concrete- Supervising the maintenance of fire-fighting units.- Maintenance, repair of central air conditioning units.

Time : From: Jan 2003 To: dec 2010Employer : Egy Armed ForcesPosition A factory manager Responsible for all sections

- section of Lathing and metal forging .- Maintenance of equipment department- Department of Human Resources- Department of lifting equipment and winches- Section of metal shaping and shear equipment.- Section of stores and supply Requirements .- Insulating paint section .- quality controlling section .- Planning and development of production Department.and response on:- Increase production, assets capacity and flexibility while minimizing unnecessary

costs and maintaining current quality standards- Lead the operations management team by providing strong leadership and guidance- Develop systems and processes that track and optimize productivity and standards,

metrics and performance targets to ensure effective return on assets- Ensure that all corporate guidelines and procedures are adhered to- - Communicate regularly with direct reports and management and supervise their

performance in all functions including performance evaluation- Ensure factory buildings are operated and maintained to the highest level- Ensure a consistent level of coaching.- Follow all Health & Safety and Environmental requirements that are defined on work

instructions or communicated in training- Ensure that purchasing and manufacturing comply with engineering drawings and

specifications

Time : From: Jan 2000 To: Dec 2002Employer : Egy Armed ForcesPosition supervision of mechanical maintenance and repair

- Maintenance and repair of hydraulic gates system and sensors for hangars.- repair and maintenance of hydraulic Cycles for heavy equipment's.

4

- manufacturing and maintenance and repair of guidance Panels for roads and road guardrail .

- Mechanical installation and maintenance of Central concrete mixers- General maintenance of central air conditioning unit Carrier 125 tons Centrifugal

Chillers Time : From: dec1995 To: Dec 1999Employer : Egy Armed ForcesPosition site engineer for repair and maintenance Responsible on

- Maintenance and repair and change modules of power systems (automatic transfer switch – converter – inverter – uninterruptible power supply – power control system - storing batteries )

- Maintenance and repair of  generators (Caterpillar - Cummins and Duets).- Supervise the installation and operation of photovoltaic cells and modules.- Maintenance of HVAC and fire-fighting units.

Background Summary

Communication Skills: - Conducted a group of educational lectures on the Operation and maintenance procedures of different types of Pontoon Bridges.- Conducted a presentation for a group of senior engineers, discussing the operation and maintenance of several types of Equipments and Heavy Machinery.

Analytical Skills : - Coordinated with several Mechanical engineers a number of work groups in the field of Heavy Equipments Operation, maintenance and repair.- Supervised maintenance management staff and conducted performance reviews of workers and technicians.- Maintained records and tracked work orders, spare parts and maintenance history of equipment and more through computerized system.- Recommended measures to improve conditions and operations of machines and equipment. Moreover, Designing and modification of any missing parts of equipment to ensure continuous operation flow.

Computer Skills:- Excellent knowledge of Internet operations- Professional in using all the Microsoft Office Package- good user of AutoCAD, primavera and other Mechanical Engineering programs.

Language Skills:- Perfect Command of both written and spoken English and Arabic.

Personal DataDate of Birth : October 24th, 1971.Place of Birth : Cairo.Nationality : Egyptian.Marital Status : Married Hobbies and Interests : Football, swimming, jogging, reading,

REFERENCES FURNISHED UPON REQUEST