CURRICULUM VITAE OF: JASON JAMES M c CAFFREY D.O.B. 4 th May 1972 PRINCIPAL CIVIL, STRUCTURAL & ARCHITECTURAL ENGINEERING MANAGER PRINCIPAL ACCOUNTABILITIES Ultimately I procure and deliver ‘Heavyweight Engineering Designs’ and construction projects. I have extensive experience in Energy, Petrochemical (Oil & Gas), Defence, Utilities, Transportation, Rail, Communications, Commercial, Luxury Residential and Marine development projects. The key areas of my project activities include research and design (inception), conceptualisation, Front End Engineering Design (FEED), Detailed Design, Construction, Installation and commissioning. A large quantity of my work requires performing Quality Assurance (QA) and Control Reviews (CR) to ensure technical integrity, design optimisation, rationalisation, constructability, functionality and reliability of design products. This is something that I do efficiently due to a natural aptitude for Engineering and extensive knowledge of the Engineering Codes of Practice including, but not limited to: BS, ACI, AISC, API, ASTM, AASHTO, BS, UBC/IBC. Where practical I will use Best Practice Guidance published by the BRE. As a high calibre individual I provide input to the development of project execution and contracting strategies so as to complement the designs, construction and operating methods. This is something which is instrumental in leading the Team so that they deliver projects successfully. I am fully capable and experienced in managing outsourced work to engineering consultants and contractors to ensure that they are fed with the correct technical knowledge so they remain focused to delivering the project, to the desired quality, whilst remaining on Time and within Budget. As a Director / Principal / Chief Supervising Civil & Structural Engineer I provide technical input and leadership to the relevant business departments and/or multi-disciplinary groups. This includes the identification, assessment & selection of new business opportunities so as to sustain the group by recognising the entry point for such services. As one of the Global Leading Freelance Civil & Structural Engineering Consultancies it is necessary for me to be able to identify new technologies to overcome new business challenges and being able to work with various business departments to formulate project proposals, defining the scope of works and participating in the development of technical solutions. Part of my duties also entails contributing to updating Standards and Guidelines within my own area of expertise. Annually JACE Ltd. has the capacity to complete works with a build cost up to £50 Million at a fee of 1.5%. We carry £3 Million Professional Indemnity Insurance for projects up to £250 Million (5 Year Project). INDUSTRY EXPERTISE Director / Principal / Senior / Lead Civil, Structural & Architectural Engineering Manager: (2003 to 2013) Information Technology in Architecture Engineering & Construction, (CS&A) Engineering & Construction, Project Management, CS&A Engineering Designs, State of the Art 3D Modelling Design Specialist With a predominant focus in the Heavy Engineering Industry Sector our key areas of expertise include: FEED, Inception to Completion Project Design Management, Expert 3D Modelling Specialists, Interface Management, Interoperability & Slipstreaming between Design Stages, Management of Design Teams. FEA & Sophisticated Engineering Management & Design, Structural Analysis & Design, Reinforced Concrete RC, Steel & Timber Structures. With a specialisation in 3D Structural Analysis and Structural Design and Detailing in Steel and Reinforced Concrete Buildings & Structures. We are experts in the Design of Foundations with a Heavy Focus on Geotechnical Analysis and Design of RC piled foundations. Energy: Nuclear: Nuclear facilities, Industrial Sheds, Plant & Non-Plant Buildings, Shielding Designs, Blast Resistant Designs, Pipe bridges, Cooling Water Supply, Construction Chemicals, Zonings, Walkways, Access Platforms. Oil, Coal & Gas Power Stations: Design of Equipment Foundations, Geotechnical Analysis, Dynamic Analysis, Design of Machine foundations, Reciprocating Machinery, Chimneys, Silos, Bunkers, Steel Girder design, Material Handling Systems, Pipe Racks, FGD Works, Sea Water Treatment, Service Routing, Pipe Bridges, Boilers, Boiler Support Structures, Structural Inspections, RC Piled Foundations, Steel Structure Modifications, Cofferdams, Cooling Water Supply Pipeline Structural Rehabilitation, Cooling Towers, Outage Engineering Design & Support, Outage Project Planning, Lifting Beams, Cranes, Pre-tender Planning, Tender Preparation, Risk Assessments, Contract Management, Project Management, Site Instructions, Strain Gauge Load Testing, Half-cell Reinforcement Resistivity Testing, Drafting Contract Framework Agreements, Inspections, Expert Witness. Petrochemical: Buildings & Structures: Security Buildings & Gatehouses, 3Km Conveyor & Conveyor Support Buildings, Jetty (Quay), Interface Manager Conveyors, Stacker Re-claimers & Ship Loaders. RC Tanks, Water Supply Pipelines, Molten Sulphur Pipe Line & Support, Cathodic protection 6 th Largest Building in the World (Based on Floor Area) Building Subject to High Wind Uplift & Thermal Loads Coke Storage Building: 33,150m 2 , (356,824 sq. ft.), 1.071 Million m 3 , (38 Million cu. ft.), 89m Clear Span. Sulphur Storage Building: 1,420m 2 , (15,285 sq. ft.), 339,180 m 3 , (12 Million cu. ft.), 71m Clear Span. You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CURRICULUM VITAE OF: JASON JAMES McCAFFREY D.O.B. 4th May 1972 PRINCIPAL CIVIL, STRUCTURAL & ARCHITECTURAL ENGINEERING MANAGER
PRINCIPAL ACCOUNTABILITIES Ultimately I procure and deliver ‘Heavyweight Engineering Designs’ and construction projects. I have extensive experience in Energy, Petrochemical (Oil & Gas), Defence, Utilities, Transportation, Rail, Communications, Commercial, Luxury Residential and Marine development projects. The key areas of my project activities include research and design (inception), conceptualisation, Front End Engineering Design (FEED), Detailed Design, Construction, Installation and commissioning. A large quantity of my work requires performing Quality Assurance (QA) and Control Reviews (CR) to ensure technical integrity, design optimisation, rationalisation, constructability, functionality and reliability of design products. This is something that I do efficiently due to a natural aptitude for Engineering and extensive knowledge of the Engineering Codes of Practice including, but not limited to: BS, ACI, AISC, API, ASTM, AASHTO, BS, UBC/IBC. Where practical I will use Best Practice Guidance published by the BRE. As a high calibre individual I provide input to the development of project execution and contracting strategies so as to complement the designs, construction and operating methods. This is something which is instrumental in leading the Team so that they deliver projects successfully. I am fully capable and experienced in managing outsourced work to engineering consultants and contractors to ensure that they are fed with the correct technical knowledge so they remain focused to delivering the project, to the desired quality, whilst remaining on Time and within Budget. As a Director / Principal / Chief Supervising Civil & Structural Engineer I provide technical input and leadership to the relevant business departments and/or multi-disciplinary groups. This includes the identification, assessment & selection of new business opportunities so as to sustain the group by recognising the entry point for such services. As one of the Global Leading Freelance Civil & Structural Engineering Consultancies it is necessary for me to be able to identify new technologies to overcome new business challenges and being able to work with various business departments to formulate project proposals, defining the scope of works and participating in the development of technical solutions. Part of my duties also entails contributing to updating Standards and Guidelines within my own area of expertise. Annually JACE Ltd. has the capacity to complete works with a build cost up to £50 Million at a fee of 1.5%. We carry £3 Million Professional Indemnity Insurance for projects up to £250 Million (5 Year Project). INDUSTRY EXPERTISE Director / Principal / Senior / Lead Civil, Structural & Architectural Engineering Manager: (2003 to 2013) Information Technology in Architecture Engineering & Construction, (CS&A) Engineering & Construction, Project Management, CS&A Engineering Designs, State of the Art 3D Modelling Design Specialist With a predominant focus in the Heavy Engineering Industry Sector our key areas of expertise include: FEED, Inception to Completion Project Design Management, Expert 3D Modelling Specialists, Interface Management, Interoperability & Slipstreaming between Design Stages, Management of Design Teams. FEA & Sophisticated Engineering Management & Design, Structural Analysis & Design, Reinforced Concrete RC, Steel & Timber Structures. With a specialisation in 3D Structural Analysis and Structural Design and Detailing in Steel and Reinforced Concrete Buildings & Structures. We are experts in the Design of Foundations with a Heavy Focus on Geotechnical Analysis and Design of RC piled foundations. Energy: Nuclear: Nuclear facilities, Industrial Sheds, Plant & Non-Plant Buildings, Shielding Designs, Blast Resistant Designs, Pipe bridges, Cooling Water Supply, Construction Chemicals, Zonings, Walkways, Access Platforms. Oil, Coal & Gas Power Stations: Design of Equipment Foundations, Geotechnical Analysis, Dynamic Analysis, Design of Machine foundations, Reciprocating Machinery, Chimneys, Silos, Bunkers, Steel Girder design, Material Handling Systems, Pipe Racks, FGD Works, Sea Water Treatment, Service Routing, Pipe Bridges, Boilers, Boiler Support Structures, Structural Inspections, RC Piled Foundations, Steel Structure Modifications, Cofferdams, Cooling Water Supply Pipeline Structural Rehabilitation, Cooling Towers, Outage Engineering Design & Support, Outage Project Planning, Lifting Beams, Cranes, Pre-tender Planning, Tender Preparation, Risk Assessments, Contract Management, Project Management, Site Instructions, Strain Gauge Load Testing, Half-cell Reinforcement Resistivity Testing, Drafting Contract Framework Agreements, Inspections, Expert Witness. Petrochemical: Buildings & Structures: Security Buildings & Gatehouses, 3Km Conveyor & Conveyor Support Buildings, Jetty (Quay), Interface Manager Conveyors, Stacker Re-claimers & Ship Loaders. RC Tanks, Water Supply Pipelines, Molten Sulphur Pipe Line & Support, Cathodic protection
6th Largest Building in the World (Based on Floor Area) Building Subject to High Wind Uplift & Thermal Loads Coke Storage Building: 33,150m2, (356,824 sq. ft.), 1.071 Million m3, (38 Million cu. ft.), 89m Clear Span. Sulphur Storage Building: 1,420m2, (15,285 sq. ft.), 339,180 m3, (12 Million cu. ft.), 71m Clear Span.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CURRICULUM VITAE OF: JASON JAMES McCAFFREY D.O.B. 4th May 1972 PRINCIPAL CIVIL, STRUCTURAL & ARCHITECTURAL ENGINEERING MANAGER
INDUSTRY EXPERTISE CONTINUED… Defense: Industrial buildings, Plant & Non-plant Buildings, Multi Story Buildings, Composite Steel Floor Design, etc. Utilities: Wastewater: Water retaining structures, Inlet works, Humus Tanks, Filter beds, Reed beds, culverts, etc. Clean Water: RC filtration structures, reservoir sluice design, water supply pipelines, retaining walls, etc. Transport: Rail: Bridge inspection, Station design, Pipe bridges, Slope stability, Repairs & rehabilitation works, Telecommunication masts, No-dig technology, Pipe jacking, Cable routing, Pipe bridges, etc. Highways: Flexible pavements, Semi-ridged pavements, Drainage, Retaining walls, Service routing, etc. Commercial, Residential, Healthcare, Schools & Others: Luxury apartments, RC/Steel commercial offices, piled foundation, raft foundation, basement foundations, Car parks, Portal framed buildings-(Steel, RC & Timber), Swimming pools, RC Helix staircases, Earth retaining structures, Slope stability, Geotechnical Analysis, Rock Stabilisation, Mezzanines, Curved cellular steel roofs, etc. Maritime: BS 6349, ACI 318-02 Geotechnical Analysis and Piling Design, Piles Quay, Quay Walls, Slipways, Fender systems, mooring systems, sheet piling, cofferdams, berthing systems, fire water systems, Ship Loaders, conveyors, dampener sprinkler systems. EMPLOYMENT & WORK EXPERIENCE
Present
01-2013
JACE Ltd. Principal Civil, Structural & Architectural Engineer – Various Inc. Luxury Spa & Swimming Pool Design of a Reinforced Concrete, Steel & Timber Framed structure/s. Finite Element Analysis produced on the concrete elements including geotechnical analysis and foundation design for the base and external spa pool. This bespoke design required a fast track approach to design and fabrication.
11-2012
12-2011
Aramco Overseas: Principal Civil, Structural & Architectural Engineer: EPC Project: Working directly with the Client I was responsible for the Civil, Structural & Architectural (CS&A) Engineering Project Management for the Solids Handling Package for an Oil Refinery in Yanbu, Saudi Arabia. Responsibilities extended to ensure the delivery of all outsourced CS&A design aspects for the Solids Handling Package and where necessary designed and provided solutions where no one else could: Overall Project Value $12 Billion USD. Package valued at $450 Million USD: The majority of the work involved managing the design of two very large Coke & Sulphur Storage Buildings, a 3Km conveyor and the design of Berth 69-Port & Quay. I performed the geotechnical analysis and design verification for 1.8 Km of piles for the entire package. The efficiency of the methods adopted ensured that the detailed design was completed on time & within budget. This included providing a saving of over $6.5M in change orders. Further cost savings were ascertained throughout the project. Additional duties included liaising with suppliers, consultants and commissioning engineers relating to the design, installation and construction. I oversaw the design of the Maritime Quay ancillary equipment.
12-2011
01-2011
Various: Principal / Lead Civil, Structural & Architectural Engineering Manager / Engineering Manager: EPC Project: Working directly with/for the Client I was responsible for overseeing the civil & structural engineering for a port extension. This involved the management of the design for a number of load-out quays in accordance with BS 6349 Maritime Structures Parts 1 to 7 (2000). Due to poor ground conditions a piled foundation solution was required. To accommodate the larger 8000 Tonne ships. Dredging of the river bed was required. I provided ancillary equipment for the port including a new fender protection systems & anchor bollards. I also designed three new chlorinators for Huntsman Toxide.
01-2011 11-2009
RSRL: Principal / Lead / Senior Civil & Structural Engineering Manager: Working directly with/for the Client I was responsible for the on-going Structural review of the SGHWR facility at Winfrith, Testing & analysis management as well as the procurement of the significant structures items. This role involved providing expert knowledge & procurement management within a multi-disciplinary decommissioning period. The role involved presenting information & optioneering solutions to the client at RSRL. Bid proposals & managing specialised testing agreements under NEC forms of contract.
11-2009 07-2009
UKAEA: Principal / Lead / Senior Civil & Structural Engineering Manager: Same as above. RSRL were impressed & I was immediately signed up directly with the client. Annual Contract Value £153,000 + VAT
06-2009 09-2008
Sabbatical Year: Kitesurf World Tour. 32nd in the World. Current: European Kite Speed Sailing Champion. Winner of the European Kite Speed Sailing Championship 2009.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CURRICULUM VITAE OF: JASON JAMES McCAFFREY D.O.B. 4th May 1972 PRINCIPAL CIVIL, STRUCTURAL & ARCHITECTURAL ENGINEERING MANAGER
09-2008
02-2007
HalcrowYolles: Principal / Lead Civil & Structural Engineer Manager: EPC Project. Principal Civil, Structural & Architectural Engineering Manager: EPC Project: Responsible for the Overall Design, Design Management & Procurement of the non-safety related structures for a major nuclear defence project; value ≈£250 Million. This leading role involved engineering management within a multi-disciplinary design team liaising with The Client (AWE), Management Contractors (AMEC), Architects (SMC-Parr), MEP Engineers (MPS) and Civil/Structural Engineers (Halcrow) to achieve a value engineered solution. Other projects undertaken included restoration to Swindon Town Hall as well as providing engineering support for a New Central Library by liaising with the Chief Architect for Swindon BC; Project Value £23M. I also designed a new build Retirement Home, £3M. Provided Training and Development Opportunities for Junior, Senior Engineers, Engineering Technicians, Draftsman and Modellers personnel. Worked with International standards including ACI, AISC, API, ASTM, AASHTO, BS, UBC/IBC, etc.
02-2007
11-2006
McNicholas Construction: Principal / Lead Civil & Structural Engineering Manager: EPC Project Working for the Contractor I provided project management & engineering support to the main FTN design team undertaking predominantly I performed the geotechnical analysis and piling designs for the RC concrete bases for telecommunication towers. Also provided a comprehensive report structure to ensure future designs could be taken with ease.
10-2006
05-2006
ALSTOM & AMEC Consortium: Principal / Lead Civil & Structural Engineering Manager: Working for the Contractor I facilitated engineering supervision & support to the Design & Construction of a £40 Million Flu Gas Desulphurisation (FGD) Project at Kilroot Power Station (Belfast). Projects undertaken included Detailed Foundation Design, Managing the Design Team. Further responsibilities including Site Project Management, Liaising with the client: Managing the Sub-contracts, Design Organisation & Optimisation.
04-2006
01-2006
RWE nPower: Principal / Lead Civil & Structural Engineer: Client Framework Agreements Reporting directly to the client/s I provided support to many of the UK’s power stations. Projects undertaken included Saltend cogeneration: Project planning & analysis of the outage lay-down coordination at Deeside Power Station. Conoco Philips cogeneration: Drafting Contracts, Specifications, Site Planning, Contract Management & Site Supervision.
12-2005 12-2004
Marconi Communications Limited: Principal / Lead Civil & Structural Engineering Manager: EPC Project West Coast Main Line: (Rail & Communications) Working directly for the client I facilitated Project Engineering Management for the provision of 176 new communication masts & tower bases.
2012-04
08-2004
Spencer: Principal / Lead Civil, Structural & Architectural Engineering Manager: Wembley Station: (Design Construction Interface) Working with the main contractor I provided project management & structural engineering support for station modifications & link bridge works.
08-2004 05-2004
David Smith Associates: Principal / Lead Engineer for 28 small projects. Small residential schemes including a school, a bank refurbishment project, housing design & renovation, building control checking etc. I also worked as part of the design team for a £12.5 million school in Northampton.
05-2004 01-2004
Andrew Firebrace Partnership: Principal / Lead Engineer: Commercial & Residential Construction Projects. Duties included lead design engineer for a new portal frame refrigeration building. Residential designs including Swimming Pools & Glue Laminated Portal Frames. Timber Design; Loft Conversions.
01-2004 05-2003
Alan Wood & Partners: Commercial Construction Projects. Working alongside a team of professional engineers I was asked to design a 2.5 acre piled ground floor slab & large industrial portal frame. New school buildings, Classrooms, Gym etc.
07-2003 05-2003
Various sort term contracts: BNFL, R.G. McCaffrey & Partners: Small residential design schemes such as new schools, access platforms, portal frames, refurbishment projects. I also proved diaphragm action on a steel trussed roof for a relocated orangery. Conducted site investigations and prepare reports.
05-2003 05-2001
Dandara Jersey Limited: Civil Design Engineer – Commercial Construction Projects. Design Engineer for a £17.5M Commercial & Luxury Residential Apart. Block: Inc. 4 story office block in composite steelwork.
05-2003 05-2001
Severn Trent Engineering: Designed a water supply pipeline in the village of Leak, Cost £2.7M. Design Engineer-Various Water Retaining Structures to BS 8007 as well as producing hydraulic jump calculations.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CURRICULUM VITAE OF: JASON JAMES McCAFFREY D.O.B. 4th May 1972 PRINCIPAL CIVIL, STRUCTURAL & ARCHITECTURAL ENGINEERING MANAGER
INFORMATION TECHNOLOGY IN ARCHITECTURE, ENGINEERING & CONSTRUCTION (ITAEC)
Project Organisation & Management: Oracle Primavera & Microsoft Project, MS Office (Business) Design Modelling & Analysis: SAP, PDMS, MasterSERIES, STAAD, Scale, S-Frame, TEDDS, ROBOT etc. 3D Detail Modelling: AutoCAD (ADT), REVIT, MasterCAD, TEKLA Structures 14, Bentley Microstation.
EDUCATION 1999-2000 Loughborough University
M.Eng – Part B. Civil & Building Engineering, Grade - Upper Second Class Honours 1995-1999 Loughborough University
M.Eng – Part A. Civil & Building Engineering, Grade - Lower Second Class Honours 1993-1995 South Devon College:
G.N.V.Q. III. Construction & the Built Environment, Grade - Distinction B.T.E.C. Level 3 Mathematics Grade – Distinction
1988-1990 Kitson College Leeds City & Guilds Stickhandling & Administration - Merit
1988-1989 Kitson College Leeds City & Guilds Bricklaying & Stonemasonry - Merit
IT-AEC Information Technology in Architecture, Engineering & Construction Building Design & Civil/Structural Engineering Design Consultancy 3D Structural Modelling Specialists Commercial Management & Quantity Surveying Resident Engineering & Site Supervision Tel: +44(0)7890 278110 E-Mail: [email protected]
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Related Documents
