Distributed exclusively by Allied Building Products www.tribuiltmaterialsgroup.com PROFESSIONAL GRADE CUTTING EDGE TRIM COIL OVERVIEW ALUMINUM TRIM COIL SPECIFICATIONS Trim coil is primarily used when creating custom fabricated covers to protect hard to maintain areas on a home or business exterior. Allied Building Products’ CuttingEdge is available in virtually all Allied locations that offer premium vinyl, steel and aluminum sidings – and vinyl and wood windows for the quality oriented craftsman contractor. CuttingEdge trim coil is manufactured to strict specifications to ensure dependable quality in multiple colors that match Allied’s preferred and recommended siding lines. PVC Trim Coil is manufactured from 3000 series alloy, commercial quality aluminum sheet. Nominal thickness is 0.019 inch. Three coatings are applied to the top of the aluminum sheet using a roll coater. The first is an inorganic corrosion protective chemical treatment. The second is an organic corrosion protective primer applied at a nominal thickness of 0.1 mils. The third coating (i.e., the top coat) is a polyvinyl chloride, plastisol coating applied in a striated pattern to an equivalent dry film thickness of 3.5 mils. Two coatings are applied by roll coating to the back of the panel. The first is an inorganic corrosion protective chemical treatment. The second coating is a corrosion resistant polymeric coating applied at a nominal film thickness of 0.2 mils. PVC and Painted Aluminum Trim Coil is to be furnished and installed in accordance with: • The Aluminum Association • American Architectural Manufacturing Association • Aluminum Siding Application Manual RA-15 General PVC Premium Aluminum Trim Coil Material
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Distributed exclusively by Allied Building Productswww.tribuiltmaterialsgroup.com
PROFESSIONAL GRADE
CUTTING EDGE TRIM COIL
OVERVIEW
ALUMINUM TRIM COIL SPECIFICATIONS
Trim coil is primarily used when creating custom fabricated covers to protect hard to maintain areas on a home or business exterior. Allied Building Products’ CuttingEdge is available in virtually all Allied locations that offer premium vinyl, steel and aluminum sidings – and vinyl and wood windows for the quality oriented craftsman contractor. CuttingEdge trim coil is manufactured to strict specifications to ensure dependable quality in multiple colors that match Allied’s preferred and recommended siding lines.
PVC Trim Coil is manufactured from 3000 series alloy, commercial quality aluminum sheet. Nominal thickness is 0.019 inch.Three coatings are applied to the top of the aluminum sheet using a roll coater. The first is an inorganic corrosion protective chemical treatment. The second is an organic corrosion protective primer applied at a nominal thickness of 0.1 mils. The third coating (i.e., the top coat) is a polyvinyl chloride, plastisol coating applied in a striated pattern to an equivalent dry film thickness of 3.5 mils.Two coatings are applied by roll coating to the back of the panel. The first is an inorganic corrosion protective chemical treatment. The second coating is a corrosion resistant polymeric coating applied at a nominal film thickness of 0.2 mils.
PVC and Painted Aluminum Trim Coil is to be furnished and installed in accordance with:
• The Aluminum Association• American Architectural Manufacturing Association• Aluminum Siding Application Manual RA-15
General
PVC Premium Aluminum Trim Coil Material
Distributed exclusively by Allied Building Products1.800.4.ALLIED
www.tribuiltmaterialsgroup.com1.800.516.1485
PRODUCT PROPERTIES
Alloy or Equivalent 3105
Density (lb/cu. in) 0.098
Specific Gravity 2.72
Min. Ultimate (tensile) Stength (psl) 28,000
Min. Yield Strength (psi) 25,000
Min. Elongation (percent) in 2 in. 4
Ultimate Shear Strength (psl) 15,000
Typical Modulus of Elasticity (ksl) 10,000
Average Coefficient of Expansion (in/in/˚F) 0.0000131
Melting Range (degrees F) 1175-1210
Thermal Conductivity at 77˚ F (btu-in/sq ft-hr-f) 1190
TB0029 6/10
Painted Trim coil is manufactured from 3000 series alloy, commercial quality aluminum sheet. Nominal thickness is 0.019 inch and .024 inch in 24” x 50 ft. only. Both sides of the aluminum sheet are continuously coated with three protective coatings, using a roller coating technology. The first coating is a corrosion resistant inorganic treatment. The second is a corrosion resistant thermosetting polymeric coating applied at a nominal thickness of 0.1 mils. The third coating (i.e., the top coat) is a thermosetting polyester coating applied at a nominal of .082 mils. This process yields a nominal coating thickness of 0.92 mils.
Painted Aluminum Trim Coil Material
Related Documents
