Advantages Trimming of thermal formings - 3D Signs ... Cutting by copying Cutting by copying Process - Interfaces directly with point to point digitising arms ( MicroScribe , Faro, Romer...), to let you scan 3 dimensional cutting paths without CAM software. - The operator simply digitises the required tool trajectory over the part and the CNC cutting paths are automatically generated. Support for virtually all NC controls on the market can be accommodated. (Fanuc, NUM, Heidenhain, Fargo,...). - Works in 2, 3, 4 and 5 axis milling environment. Simplified operator controlled programming: - Digitised data is utilised without the need to create a single CAD file. - Complete interactive graphical cutter path editing. - Automatic toolpath creation. 5 axis machining: - Reduce machine down time with off line digitising process away from the machine tool. - Increased productivity by using the tool path optimisation. - Quality machined results in any material (wood, laminates, plastics...) thanks to the constant cutting feeds and speeds. HCHC-PL-FR-0902 www.picasoft.com - e-mail: [email protected] DIGITIZING AND CUTTING TOOLS Simply control your complicated cutting paths directly from the part to be machined Picasoft S.A.S. - Beauzy - Route de Châtres - 41300 Theillay - France - Tél. : (33) 254 833 216 - Fax : (33) 254 833 572
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Advantages
Trimming of thermal formings - 3D Signs ...
Cutting by copyingCutting by copying
Process
- Interfaces directly with point to point digitising arms ( MicroScribe , Faro, Romer...), to let you scan 3 dimensional cutting paths without CAM software.
- The operator simply digitises the required tool trajectoryover the part and the CNC cutting paths are automaticallygenerated. Support for virtually all NC controls on the marketcan be accommodated. (Fanuc, NUM, Heidenhain, Fargo,...).
- Works in 2, 3, 4 and 5 axis milling environment.
Simplified operator controlled programming:
- Digitised data is utilised without the need to create
a single CAD file.
- Complete interactive graphical cutter path editing.
- Automatic toolpath creation.
5 axis machining:
- Reduce machine down time with off line digitising processaway from the machine tool.
- Increased productivity by using the tool path optimisation.
- Quality machined results in any material (wood, laminates,plastics...) thanks to the constant cutting feeds and speeds.
HCHC-PL-FR-0902 www.picasoft.com - e-mail: [email protected]
DIGITIZING AND CUTTING TOOLS
Simply control your complicated cutting pathsdirectly from the part to be machined
Picasoft S.A.S. - Beauzy - Route de Châtres - 41300 Theillay - France - Tél. : (33) 254 833 216 - Fax : (33) 254 833 572
Picasoft S.A.S. - Beauzy - Route de Châtres - 41300 Theillay - France - Tél. : (33) 254 833 216 - Fax : (33) 254 833 572
PC : Pentium III or better, 128 Mo Ram,17” Monitor, OpenGLTM
DEALER CONTACT
Required configuration:
Technical characteristicsCutting
- Roughing
- Finishing
- Drilling
- Invert the cutting direction
- define tool position(centreline, contour offset left or right)
Object creation
- Rectangle
- Rectangle with radius corners
- Point
- Circle
- Curves (linear or Bezier curves)
Editing
- Translation
- Rotation
- Scale
- Projection
- Point suppression
- Modify points
- Merge curves
- Copy the toolpath
- Offset the toolpath
- Modify tangency
- Edit normals
- Smoothing of normals
- Invert normals
Datum
- Set origin by 3 points
- Set origin by construction geometry (circle, plane...)
- The digitising arm can be easily repositioned for digitising large parts
HCHC-PL-FR-0902 www.picasoft.com - e-mail : [email protected]
Related Documents
