GAS Cutting and Welding Torches GAS RANGE www.parweld.com UK & Ireland Sales 01299 269 500 | Export Sales +44 1299 269 507 GAS RANGE GAS 270 GAS RANGE Features Cutting and Welding Torches NM 18/90 Cutting Torch • Cuts to 10" (250mm) • Solid brass and stainless steel construction • Nozzle mix design for maximum safety • Backfire resistant design • Easy grip control knobs for simple and safe operation • Progressive bleed characteristics • Robust lever latch • Gas valves fitted with stainless steel stems and double O Ring seals 708101 18/90 NM Cutter Stock Code Description Features Cutting and Welding Torches Everyday NM 18/90 Cutting Torch • Cuts to 10" (250mm) • Die cast metal handle • Nozzle mix design for maximum safety • Backfire resistant design • Easy grip control knobs for simple and safe operation • Progressive bleed characteristics • Gas valves fitted with stainless steel stems E708101 Everyday 18/90 NM Cutter Stock Code Description BEST BUY
15
Embed
Cutting and Welding · PDF fileCutting and Welding Torches NM 18/90 Cutting Torch • Cuts to 10" (250mm) • Solid brass and stainless steel construction ... 701108 ANM Cutting.....
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Manufactured to offer the safest method of operation and reliability. The Parweld NM 27/90 Cutting Torch is an extended reach blowpipe with 90° head, length 27".
Stock Code Description708121 27/90 NM Cutter
NM 27/105 Cutting Torch
Manufactured to offer the safest method of operation and reliability. The Parweld NM 27/105 Cutting Torch is an extended reach blowpipe with a 105° head angle and is ideal for scrap cutting on flat plate, length 27".
Stock Code Description708124 27/105 NM Cutter
NM 36/90 Cutting Torch
Manufactured to offer the safest method of operation and reliability. The Parweld NM 36/90 Cutting Torch is an extended reach blowpipe with 90° head, length 36".
Stock Code Description 708141 36/90 NM Cutter
NM 36/105 Cutting Torch
Manufactured to offer the safest method of operation and reliability. The Parweld NM 36/105 Cutting Torch is an extended reach blowpipe with a 105° head angle ideal for scrap cutting on a flat plate, length 36".
Stock Code Description 708144 36/105 NM Cutter
Head Nut for NM Cutters Stock Code Description 1601A04 Head Nut for NM Cutters
Traditional Type 5 Welding and Cutting Torch
Designed to cope with the rigours of modern welding and fabrication environments. Easy adaption of the handle allows for welding, cutting or heating.
Features• Cuts to 6" (150mm) with Acetylene
• Cuts to 3" (76mm) with Propane
• Cuts to 3/8" BSP Fitting
• Welds mild steel to 1" (25mm)
• Heats with Propane from 72,000 – 618,000 BTU/H
• Solid forged handles gun drilled
• Simple hand connections for changes from welding to cutting
Stock Code Description 707101 Type 5 Cutting Attachment 707102 Type 5 Shank 707103 Type 5 Welding Mixer (Acetylene) 707104 Type 5 Heating Mixer (Propane) 707105 270mm Bent Neck (Propane) 707107 700mm Bent Neck (Propane)
Note: Please see the nozzle section for detailed information on nozzle stock codes.
E70810118/90 NM CUTTER
70810118/90 NM CUTTER
18" 457mm
18" 457mm
90°
90°
70812127/90 NM CUTTER
27" 686mm
90°
70814136/90 NM CUTTER
36" 911mm
90°
70812427/106 NM CUTTER
27" 686mm
105°
36" 911mm
70814436/106 NM CUTTER
105°
1601A04HEAD NUT
CUTTING NOZZLES ANM ANME PNM PNME
Everyday Gas Regulators – 300 BAR
Single Stage 1 Gauge Stock Code Description Maximum Outlet Pressure
E700113 Regulator 300 Bar – Single Stage 1 Gauge Argon 30 lpm flow E700140 Argon Preset Regulator 3.0 Bar E700151 Regulator 300 Bar – Single Stage 1 Gauge CO2 (Side Entry) 4.0 Bar
Single Stage 2 Gauge Stock Code Description Maximum Outlet Pressure
E700121 Regulator 25 Bar – Single Stage 2 Gauge Acetylene 1.5 Bar E700122 Regulator 300 Bar – Single Stage 2 Gauge Oxygen 10 Bar E700123 Regulator 300 Bar – Single Stage 2 Gauge Argon 30 lpm flow E700152 Regulator 300 Bar – Single Stage 2 Gauge CO2 (Side Entry) 4.0 Bar
Features• Flow rate up to 96m3/h (3389 ft3/h)• Full 300 bar capability• Bottom entry design suited for top outlet cylinder valves• Improved Valve design to reduce gas pressure pulses
Fittings• Fitted with 1/4"g parallel threaded gauges• Fitted with standard 3/8" BSP outlet• Fitted with 5/8" BSP inlet connections
Single Stage Plugged Stock Code Description Maximum Outlet Pressure
E700101 Regulator 25 Bar – Single Stage Plugged Acetylene 1.5 Bar E700102 Regulator 300 Bar – Single Stage Plugged Oxygen 10 Bar E700104 Regulator 25 Bar – Single Stage Plugged Propane 4.0 Bar E700141 Argon Indicator Regulator 3.0 Bar
Designed to extinguish the flame front and ensure that it does not reach the cylinder or gas supply system. Manufactured to offer the highest level of protection. Stock Code Description Application
709112/W Flashback Arrestor – Resettable Oxygen 3/8" BSP Male/Female for Connection to Regulator 709114/W Flashback Arrestor – Resettable Fuel 3/8" BSP Male/Female for Connection to Regulator
Flashback Arrestors
Features• Large sintered flame arrestor element• Fully guided non-return valve• Fast acting thermal cut off valve which activates when
the heat sensitive element reaches 100ºC• Resettable pressure sensitive control valve• Inlet Dirt Filter
Gas Contractors Set 2 Supplied as above Gas Contractors Set 2C Supplied as above in Aluminium Case Gas Contractors Set 4 As Gas Contractors Set 2 but with 20 metre hose – 764120
Gas Contractors Set E – Type 5 Cutting and Welding Set
Set supplied complete with: Stock Code Description
E700121 Regulator 25 Bar Single Stage 2 Gauge Acetylene E700122 Regulator 300 Bar Single Stage 2 Gauge Oxygen 10 Bar 709102 Flashback Arrestor In-line Oxygen 709104 Flashback Arrestor In-line Fuel 760805 (not shown) Fitted Hose (Oxy and Ace) 8mm / 5 ⁄16" – ³⁄8" BSP Valves – 5m 695001 Combination Spanner 682001 Round file cup lighter 707101 Type 5 Cutting Attachment 707102 Type 5 Shank 707103 Type 5 Welding Mixer 704205 Type 2/3/5 Weld Nozzle Size 5 704207 Type 2/3/5 Weld Nozzle Size 7
Gas Contractors Set E Supplied as above Gas Contractors Set EC Supplied as above inside an Aluminium Case
7608-O Propane Welding Hose – Orange 8mm / 5⁄16" No Fittings 50m No Fittings
7610-O Propane Welding Hose – Orange 10mm / 3⁄8" No Fittings 50m No Fittings
Argon Hose – Coil (No Fittings) Stock Torch Cylinder Code Description Hose Bore Fitting Length Fitting 7606-A Argon Nylon Braided Hose 8 Bar 6mm / 1⁄4" No Fittings 50m No Fittings
7610-A Argon Nylon Braided Hose 8 Bar 10mm / 3⁄8" No Fittings 50m No Fittings
Twin Hose – Coil (No Fittings) Stock Torch Cylinder Code Description Hose Bore Fitting Length Fitting 7706 Oxygen/Acetylene Twin Hose – Red & Blue 6mm / 1⁄4" No Fittings 50m No Fittings
7708 Oxygen/Acetylene Twin Hose – Red & Blue 8mm / 5⁄16" No Fittings 50m No Fittings
7710 Oxygen/Acetylene Twin Hose – Red & Blue 10mm / 3⁄8" No Fittings 50m No Fittings
Designed to Transport Propane, Acetylene or Oxygen Gas with a Maximum Working Pressure of 20 bar.
Features• Spiral reinforced construction for flexibility• Ferruled end connections ensure reliability and gas tightness• Fitted with check values conforming with EN730• Built in accordance with EN 1256 and EN 559• Hose burst pressure tested to 60 Bar
Features• Designed from brass bar whilst the tube and cover are moulded from high
quality polycarbonate to ensure high impact resistance and clarity• Calibrated to operate at an inlet pressure of 30PSI.• Sensitive needle valve provides easy adjustment and the downward facing
outlet connection eliminates hose kinking.
Fittings• Fitted with standard 3/8" BSP inlet and outlet connections