CUSTOMS TARIFF - SCHEDULE 73 - i Issued January 1, 2018 Chapter 73 ARTICLES OF IRON OR STEEL Notes 1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72. 2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
29
Embed
CUSTOMS TARIFF - SCHEDULE · CUSTOMS TARIFF - SCHEDULE Tariff Item SS Description of Goods Unit of Meas. MFN Tariff Applicable Preferential Tariffs 73.01 Sheet piling of iron or steel,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CUSTOMS TARIFF - SCHEDULE
73 - i
Issued January 1, 2018
Chapter 73
ARTICLES OF IRON OR STEEL Notes
1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional
dimension exceeds 16 mm.
73 - 1
Issued December 30, 2018
CUSTOMS TARIFF - SCHEDULE
Tariff Item SS Description of Goods Unit of
Meas.MFNTariff
ApplicablePreferential Tariffs
73.01 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel.
10 - - - - -Of a height not exceeding 635 mm ........................................................ TNE20 - - - - -Of a height exceeding 635 mm .............................................................. TNE
73.02 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails.
- - - - -Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm:
11 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification ......................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM- - - - -Casing, of an external diameter exceeding 177.8 mm but not exceeding
298.5 mm:21 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
-Other, of circular cross-section, of stainless steel:
7304.41 - -Cold-drawn or cold-rolled (cold-reduced)
- - -Of an external diameter of less than 19 mm:
7304.41.11 00 - - - -For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the distillation or recovery of products from natural gas
7304.41.91 00 - - - -For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the distillation or recovery of products from natural gas
73.05 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel.
-Line pipe of a kind used for oil or gas pipelines:
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM20 - - - - -Of alloy steel........................................................................................... KGM
7305.20.00 00 -Casing of a kind used in drilling for oil or gas KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7306.30.00 -Other, welded, of circular cross-section, of iron or non-alloy steel Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
10 - - - - -Galvanized, of an external diameter not exceeding 114.3 mm .............. KGM20 - - - - -Other, of an external diameter not exceeding 114.3 mm ....................... KGM30 - - - - -Of an external diameter exceeding 114.3 mm ....................................... KGM
10 - - - - -Of an external diameter not exceeding 25.3 mm ................................... KGM20 - - - - -Of an external diameter exceeding 25.3 mm but not exceeding 114.9
mm ......................................................................................................... KGM30 - - - - -Of an external diameter exceeding 114.9 mm ....................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item SS Description of Goods Unit of
Meas.MFNTariff
ApplicablePreferential Tariffs
Revised December 30, 2018
Issued December 30, 2018
73 - 8
7306.50.00 00 -Other, welded, of circular cross-section, of other alloy steel KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7307.29.20 00 - - -For installation between the wellhead assembly or surface oil pumping unit and the field marketing valve at oil or natural gas wells
73.08 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel.
7308.30.00 -Doors, windows and their frames and thresholds for doors Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
10 - - - - -Sash, casement or frame sections, not punched, drilled or further manufactured, whether or not coated, and similar material formed from hot- or cold-rolled strip, whether or not coated, for use in the manufacture of window sash, casements or frames .............................. TNE
7309.00.00 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.
73.10 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.
7310.10.00 -Of a capacity of 50 litres or more Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7310.21.00 - -Cans which are to be closed by soldering or crimping Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
- - - - -Ropes and cables, containing not more than eight strands, new:31 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM32 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM33 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM
- - - - -Ropes and cables, containing more than eight strands, new:41 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM42 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM43 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM50 - - - - -Ropes and cables, used......................................................................... KGM
7313.00.00 00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel.
7314.20.00 00 -Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more
7316.00 Anchors, grapnels and parts thereof, of iron or steel.
7316.00.10 00 - - -Of a weight of 18 kg or more NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7316.00.20 00 - - -Of a weight of less than 18 kg NMB 6% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7317.00.00 00 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper.
73.18 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel.
73.19 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included.
7319.40 -Safety pins and other pins
7319.40.10 00 - - -Specially designed for marking systems - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
73.21 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel.
-Cooking appliances and plate warmers:
7321.11 - -For gas fuel or for both gas and other fuels
CUSTOMS TARIFF - SCHEDULE
Tariff Item SS Description of Goods Unit of
Meas.MFNTariff
ApplicablePreferential Tariffs
Revised December 30, 2018
Issued December 30, 2018
73 - 20
7321.11.10 00 - - -Non-portable stoves or ranges (including those specially designed for use on boats)
7321.81.00 00 - -For gas fuel or for both gas and other fuels NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%
7321.90.10 - - -Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as cast, cut and ground, for use in the manufacture of finished grilles for non-industrial non-portable stoves or ranges, for gas fuel or for both gas or other fuels;For appliances, excluding cooking appliances and plate warmers;For cooking appliances and plate warmers for gas fuel or for both gas and other fuels, excluding non-portable stoves or ranges (including those specially designed for use on boats)
73.22 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel.
73.23 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel.
7323.10.00 00 -Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
7325.99.10 00 - - -The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:
7326.11.00 00 - -Grinding balls and similar articles for mills KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free
7326.19 - -Other
7326.19.10 00 - - -Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells;Wick sustainers for use in the manufacture of candles
7326.20.00 00 -Articles of iron or steel wire - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%
7326.90 -Other
CUSTOMS TARIFF - SCHEDULE
Tariff Item SS Description of Goods Unit of
Meas.MFNTariff
ApplicablePreferential Tariffs
Revised December 30, 2018
73 - 27
Issued December 30, 2018
7326.90.10 00 - - -Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
10 - - - - -Articles of tinplate................................................................................... - 20 - - - - -Ladders .................................................................................................. NMB30 - - - - -Hangers and similar supports, for tubes and pipes................................ KGM50 - - - - -Containers, of a kind normally carried on the person, in the pocket or in
the handbag ........................................................................................... NMB