-
Custom Roller Shades
Read all installation instructions
before installing.
Care and cleaning
Using a soft cloth or sponge, dab with a mild soap and water
solution. Do NOT use abrasive or harsh cleansers; they can damage
the surface finish. Dry with a cloth towel to prevent water
spots.
Operate the roller shade
Pull gently on the chain in one direction to lower the shade;
pull in the other direction to raise the shade.
Before you begin your installation:
Read all installation instructions before you begin!
Makesurethatyouhavealltoolsandhardware
needed for installation.
Checktheinstallationsurface(wall,ceiling,or
window frame) to ensure that you have suitable fasteners and
tools for the material.
Double-checkthewidthoftheshade.Ifyouareinstalling several
shades, be sure to match them with the appropriate window.
Checkthepartslisttoconfirmthatyouhavethecorrectnumberofbrackets.
Donotremovethewrapontherolleruntilyouhavecompleted the
installation. Leaving the shade rolled up completely will ease
installation and reduce the riskofdamage.
Forstandardrollershades,thefabricwillhangofftheBACKoftheshade,closesttothewindow.Foroptional
reverse roller shades, the fabric will hang off the front of the
shade. Be sure to note this when installingthemountingbrackets.
Roller Tube
Key Parts
ControlChain
Spring Plunger Assembly Optional Standard Valance
Assembly(notonallmodels)
Spring Plunger EndBracket
ControlEnd Assembly and Bracket
ChainTensioner
Weight Bar
Tools you may need (not included)The tools you will need for
installing your blinds will vary, depending on the installation
surface, andmountingbrackettype.Tools typically used for
installation include:
Drill with Bits
Spirit Level
1/4 NutdriverFlat-bladeorPhillipsScrewdriver
Tape Measure
Pencil
Roller shade mounting brackets
Mounting brackets
Alignment notch
Drywall Anchors
Thank you for making Levolor
a part of your home. You have
chosen the finest roller shades
available, backed by the world
renowned Levolor name.
Learn more about Levolor
and discover a resource of
information, ideas, and support
at www.levolor.com.
1816109
Additional Parts and Services Purchasing extra or replacement
parts Should the need arise, you may have your Levolor shades
repaired or restrung through our repair center. Please contact
Levolor customer service through www.levolor.com for a return
authorization number.
Contacting UsTo contact Levolor customer service regarding any
questions or concerns you may have about your new shades, you may
reach us at:
1-800-LEVOLOR (9:00 am 6:00 pm EST)
www.levolor.com
NOTE: See step 4 for cassette valance mountingbrackets.
DANGER STRANGULATION HAZARD
Keepcordsoutofthereachofchildren.
RemovecordfromchildsneckCall911orEmergencyCenterClearthroatCheckbreathingandheartbeatBeginCPR
EMERGENCY FIRST AID FOR STRANGULATION.
+
Movecribsandfurnitureawayfrom cords.
Removeobjectsbelow windows.
Loopswillappearwhentheshade is in the raised position.
Donottiecordstogether.
Installacordtensioneror cord cleat.
11R438_Levolor_Manual_Roller_Shades.indd 1 11/8/11 11:53 AM
-
Install outside mount valances (for models without returns)
6B
Install the brackets outside mount
2A Alignthenotchoneachbracketwiththemarksfrom
Step1,makingsuretheyaresquareandlevel. IMPORTANT: Be sure to
note the correct location of
eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(use of the slotted holes is
recommended), two screws perbracket.
Attachthebracketstothewallorwindowframeusing suitable
fasteners.
Mark the bracket locations
Carefullymeasurethelengthoftheshadefromthe flat surface of the
control end to the base of the small pin on the spring plunger end.
Deduct off approximately 1/4" to ensure proper tensioning of
therollerinthebrackets.
Makesurethatthereisenoughclearancefortherolled up shade and that
it will not rub or catch on the window, window frame or any
obstructions when fully rolled up.
Markthisdistanceonthemountingsurfaceatthedesiredbracketheightsothatitiscenteredinthewindow
opening.
1
Mark
Screws(2perbracket)
Spring Plunger EndBracket
Example:Installationondrywallusingtheincludedscrewsanddrywallanchors(notincluded).
Attach the tension device (chain control only)
7
Outside mount
Insidemount
NOTE:Thisstepisforinside-mountinstallationsusing a standard
valance ONLY. Marktheinsidesurfaceofthevalancetopinthe
same way as described in Step 1 for inside mount.
Alignthenotchoneachbracketwiththemarks,
makingsuretheyaresquareandequallyspacedfrom the front of the
valance. IMPORTANT: Be sure to note the correct location of
eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(useoftheslottedholesinthebracketsisrecommended).
Carefullydrillathrough-holeinthevalancetopateachmarkedbracketholelocation.
Prepare the standard valance for inside-mount installations
3A
Install the brackets inside mount
3B Alignthenotchoneachbracketwiththemarks,
fromStep1makingsuretheyaresquareandspacedequally from the
window.
IMPORTANT: Be sure to note the correct location of
eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(useoftheslottedholesisrecommended),twoscrewsperbracket.
Attachthebracketstothewallorwindowframe
usingsuitablefasteners.Ifyouareinstallingavalance,installitbetweenthebracketsandthemounting
surfaceusingthethrough-holesdrilledinStep3A.
Proceed to Step 5.
NOTE:Thisstepisforoutside-mountinstallationsusinga standard
valance ONLY. Installthevalancemountingbrackets,spacingthe
bracketsapproximately3"infromtheshadebracketsandmakingsuretheyarelevel.Anyadditional
bracketsshouldbespacedevenlybetweentheends.
Makesuretherewillbesufficientclearancebetween the roller shade
and the valance.
Proceed to Step 5.
Install the valance brackets for outside-mount installations
2B Install outside mount valances (not for all models)
Centeringthevalanceovertherollershade,slidethe top of the front
valance panel into the valance
clipsuntilitlocksintoplace.Youcanadjustthevalance spacing from the
wall by loosening the wingnutsonthevalancebrackets.
6A
Mark
Mark
Shade Width
ShadeWidth-1/4"
ShadeWidth-1/4"
Through-holes(2perbracket)
ControlEndBracket
Screws(2perbracket)
Spring Plunger EndBracket
Control End Bracket
Valance (optional)
Valance Bracket
Ifyourvalancedoesnotincludereturns,skipto6B.
Attachingthevalancetothevalancebrackets:
Small pin
Foroutsidemountstandardvalances,go to step 6.Otherwise go to
step 7.
Example:Installationonawoodwindowframeusingtheincluded screws
and optional valance.
Install the roller shade on the brackets
5 Insertthepinonspringplunger
intotheholeonthebracketandpresstheshadeintothebracket,depressing
the plunger.
AligntheT-shapedholesinthecontrol-endbracketwith the tabs on the
control end of the roller and the
hookpointingdown,asshown.Pressdowntolockthecenterhookintoplace.
Ifyourrollershadeincludesbracketcovercaps,pressthemontothebracketsasshownbelow.
Specialtyoptionforoutsidemountshadeschosen at time of
purchase.
Removetheshippingwrapperfromthearoundthe roller.
Cap
Foroutsidemountinstallations,gotostep2A.
Forinsidemountinstallations,gotostep3A.Forcassettevalanceinstallations,gotostep4.
Refer to instructions in the hold-downtensiondevice.
Special instructions for installing the roller shade headrail on
cassette valance brackets
4A
CASSETTE120 Positiontheheadrailwiththeback
panelrestingonbothbottomhooksofallbrackets.
Pushthefrontoftheheadrailfirmlyupwards and toward the window
until the groove at the top of the headrail snaps into place.
CASSETTE80 Positiontheheadrailwiththefront
panel resting on the top lip of all brackets.
Pushthebottomfrontoftheheadrailfirmlybackwardsandtowardthewindow
until the lip on the rear of theheadrailengagesthebracket and snaps
into place.
NOTE:Cassettevalancesizeis determined by shade size.
Special instructions for cassette valances
4Mountthebracketstothewallorwindowframe,withtheoutsidebracketsnofurtherthan2inches(50mm)from
the ends of the headrail. On wide shades, space
theadditionalbracket(s)atequalintervals.
CASSETTE120OutsideMount Locatetherearbracketholes.
Makesurethereleasetabisalwaysmounted
on the top. Proceedtostep4A.
CASSETTE80OutsideMount Locatetherearbracketholes.
Makesurethereleasetabisalwaysmountedon
the bottom. Proceedtostep4A.
CASSETTE120InsideMount Locatethetopbracketholes.
Makesurethereleasetabisalwaysmountedon
the top. Proceedtostep4A.
CASSETTE80InsideMount Locatethetopbracketholes.
Makesurethereleasetabisalwaysmountedon
the bottom. Proceedtostep4A.
NOTE:Bracketisdeterminedbyshadesize.
Release Tab
Release Tab
Release Tab
Release Tab
Removethetapefromthefabriconthebackofthevalanceandmakesurethefabricextendsequallyoneither
end of the valance.
Slidethecornerclipontoareturnpanel.Thetabwillfitintothechannelsonthebackofthereturnpanel.
Slidetheassembledreturnpanelontooneendofthe valance. The tab
will fit into the channels on the
backofthevalance,andthevalancetopwillfitintothe channel on the top
of the return panel.
Wrapthefabricaroundtheendofthereturnpanel.
Pressthecapsintoplace. Repeatfortheotherend.Oncebothreturnsare
installed,pullthefabrictauttoremovewrinklesandsecuretothebacksofthereturnswithmaskingtape.
For valances with wraparound returns:
Return Panel
CornerClipCap
FabricWrap
11R438_Levolor_Manual_Roller_Shades.indd 2 11/8/11 11:53 AM
-
Lea todas las instrucciones.
Asegresedetenertodaslasherramientasylos
aditamentos necesarios para la instalacin.
Reviselasuperficiedeinstalacin(pared,techo
omarcodelaventana)yasegresedetenerlos
sujetadoresylasherramientasquenecesitepara el material.
Controledosveceselanchodelapersiana.Siva
ainstalarvariaspersianas,asegresedeque combinen con la ventana
apropiada.
Reviselalistadepiezasyasegresedequeestn todos los soportes.
Noquitelaenvolturadelrodillohastaquehaya
finalizadolainstalacin.Dejarlapersianaenrollada completamente
facilitar la instalacin y reducir elriesgodequestasedae.
Enpersianasenrollablesestndar,latelacuelga
delaPARTEPOSTERIORdelapersiana,loms cerca posible de la ventana. En
las persianas con enrrollado opuesto opcional, la tela colgar de
lapartefrontaldelapersiana.Asegresede tener en cuenta esto cuando
instale los soportes demontaje.
Piezas y servicios adicionales Para adquirir piezas extra o de
repuesto Si surgiera la necesidad, puede hacer reparar o volver a
hilar sus
persianasLevoloratravsdenuestrocentrodereparaciones.ContcteseconelserviciodeatencinalclientedeLevolorenla
direccin www.levolor.comparaobtenerunnmerodeautorizacin de
devolucin.
Para contactarnosPara contactar el servicio de atencin al
cliente de Levolor en relacin a cualquier consulta o pregunta sobre
sus nuevas persianas, comunquese con nosotros al:
1-800-LEVOLOR (9:00 am 6:00 pm EST)www.levolor.com
Antes de iniciar la instalacin, lea todas
las instrucciones.
1816109
PersianasenrollablespersonalizadasGracias por hacer que
Levolor
forme parte de su hogar. Ha
elegido la persiana enrollable
ms delicada, respaldada por
el nombre de Levolor, que es
reconocido en todo el mundo.
Obtenga ms informacin sobre
Levolor y descubra una fuente
de informacin, ideas y asistencia
en www.levolor.com.
Cuidado y limpieza
Utilizandounpaosuaveounaesponja,limpieconunasolucindeaguayjabnsuave.NOutilicelimpiadoresabrasivosnifuertes,yaquepuedendaarelacabadodelasuperficie.Squelaconunatoallapara
evitar que queden manchas de agua.
Haga funcionar la persiana enrollable
Tire suavemente delcordn en una
direccinparabajarlapersiana;tirea en la direccincontraria para
subirla.
Antes de comenzar la instalacin:
Tubo paraenrrollar
Piezas clave
Cadenade control
Ensamblado delmboloderesorte Ensamblado de cenefa
estndaropcional(noentodoslosmodelos)
Soporte demontajedelmboloderesorte
Ensambla-dodel extremode controly soporte
Tensorde cadena
Barra de peso
Herramientas necesarias(no incluidas)Las herramientas que
necesitar para
instalarlaspersianaspuedenvariarsegnlasuperficiedeinstalacinyeltipodesoportedemontaje.Las
herramientas que generalmente se utilizan pararealizar la
instalacin son:
Taladro con brocas
Niveldeburbujade aire
Destornillador paratuercas de 1/4 de
pulgada
Destornillador planoo Phillips
Cintamtrica
Lpiz
Soportes de montaje de la persiana enrollable
Soportesdemontajeestndar
Muescadealineacin
Anclas de expansin parapanel de yesov
NOTA: Para cenefas tipo alero y soportes, siga con el paso
4.
Mantengaloscordonesfueradel alcance de los nios.
RetireelcordndelcuellodelnioLlameal911oaunCentrode
emergenciasDespejelagargantaControlelarespiracinyloslatidos
cardacosComienceconRCP
PRIMEROS AUXILIOS DE EMERGENCIA EN CASO DE ESTRANGULACIN.
+
Coloquelascunasydemsmuebleslejosdeloscordones.
Retirelosobjetosdedebajodelas ventanas.
Secrearnbuclescuandolaper-sianaseencuentreenlaposicinelevada.
Noateloscordones.
Instaleuntensordecordnounsoporteparacordn.
PELIGRO RIESGO DE ESTRANGULACIN
11R438_Levolor_Manual_Roller_Shades.indd 3 11/8/11 11:53 AM
-
NOTA: Este paso es slo para instalaciones
interioresenlasqueutilizarSOLAMENTEunacenefaestndar.
Marquelasuperficieinteriordelapartesuperior
de la cenefa de la misma forma que en el paso 1, para realizar
una instalacin interior.
Alineelamuescadecadasoporteconlasmarcas
yasegresedequeestnaescuadrayespaciados
enformaparejadesdelapartefrontaldelacenefa.
IMPORTANTE:Asegresedetenerencuenta la ubicacin correcta de cada
soprote; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje
delossoportes(serecomiendautilizarlosagujeros ranurados de los
soportes).
Realiceconcuidadounagujeroguaenlaparte superior de la cenefa en
cada ubicacin marcada delosagujerosdelossoportes.
Midaconcuidadoellargodelapersiana,desde la superficie plana del
extremo de contral hasta labasedelapequeaclavijadelextremodel
mboloderesorte.Resteaproximadamente1/4"
paraasegurarsedequeelrodilloest correctamente tensionado en los
soportes.
Asegresedequehayasuficienteespaciopara
lapersianaenrolladaydequestanorocela ventana ni se atasque en ella
ni en su marco, y de
quenohayaobstruccionescuandolapersianaesttotalmente enrollada.
Marqueladistanciaenlasuperficiedemontaje a la altura deseada del
soporte, a fin de que quede centrada en la abertura de la
ventana.
Instale las abrazaderas de la cenefa en cascadas
4Montelasabrazaderasenlaparedomarcodelaventana,con las
abrazaderas exteriores a una distancia no mayor
de5,08cm(50,08mm)desdelosextremosdelcortinero.Enlaspersianasanchas,separela(s)abrazadera(s)adicional(es)enintervalosiguales.
Cascadas120Montajeexterior
Ubiquelosorificiosposterioresdelasabrazaderas.
Asegresedequelalengetadeliberacinest
siempre montada en la parte superior. Contineconelpaso4A.
Cascadas 80.Montajeexterior
Ubiquelosorificiosposterioresdelasabrazaderas.
Asegresedequelalengetadeliberacinest
siempre montada en la parte inferior. Contineconelpaso4A.
Cascadas120.Montajeinterior
Ubiquelosorificiossuperioresdelasabrazaderas.
Asegresedequelalengetadeliberacinest
siempre montada en la parte superior. Contineconelpaso4A.
Cascadas80.Montajeinterior
Ubiquelosorificiossuperioresdelasabrazaderas.
Asegresedequelalengetadeliberacinest
siempre montada en la parte inferior. Contineconelpaso4A.
NOTA:Laabrazaderasedeterminaenbasealtamaode la persiana.
Lengetadeliberacin
Lengetadeliberacin
Lengetadeliberacin
Lengetadeliberacin
Instale el cortinero de la persiana en rollo en las abrazaderas
de la cenefa en cascadas
4A
Cascadas120 Coloqueelcortineroconelpanel
posterior de modo que quede en ambos ganchos inferiores de las
abrazaderas.
Presionelapartefrontaldelcortinero firmemente hacia arriba y
hacia la ventana hasta que la ranura en la parte superior del
cortinero calce en su lugar.
Cascadas80 Coloqueelcortineroconelpanel
frontal de modo que quede en el reborde superior de las
abrazaderas.
Presionelaparteinferiorfrontaldelcortinero firmemente hacia atrs
y hacia la ventana hasta que el reborde en la parte posterior del
cortineroseajusteenlaabrazaderay calce en su lugar.
NOTA: La cenefa en cascadas se determina en base
altamaodelapersiana
Marque las ubicacionesde los soportes
1
MarcaInstalacinexterior
Instalacininterior
Marca
Marca
Ancho de lapersiana
Ancho de la persiana: 1/4"
Ancho de la persiana: 1/4"
Clavijapequea
Paracenefasestndardeinstalacinexterior,sigaconelpaso2A.Parainstalacionesinterioresestndar,sigaconelpaso3A.Paracenefastipoaleroysoportes,sigaconelpaso4.
Instale los soportespara la instalacin exterior
2A
Tornillos(2por soporte)
Soportedemontajedelmboloderesorte
Example:Installationondrywallusingtheincludedscrewsanddrywallanchors(notincluded).
Soportes paraextremo de control
Alineelamuescadecadasoporteconlasmarcas
realizadasenelpaso1yasegresedequeestn a escuadra y a nivel.
IMPORTANTE:Asegresedetenerencuenta la ubicacin correcta de cada
soprote; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje
delossoportes(serecomiendautilizarlosagujeros ranurados); dos
tornillos por soporte.
Fijelossoportesenlaparedoenelmarcodela
ventanautilizandolossujetadorescorrectos.
NOTA: Este paso es slo para instalaciones
exterioresenlasqueutilizarSOLAMENTEunacenefaestndar.
Instalelossoportesdemontajedelacenefa,
espaciandolossoportesaproximadamentea3"
desdelossoportesdelapersiana,yasegresedequeestnanivel.Lossoportesadicionalesdebenestarespaciadosenformaparejaentrelosextremos.
Asegresedequehayasuficienteespacioentrelapersiana enrollable y
la cenefa.
Contineconelpaso5.
Instale los soportes de la cenefa para instalacin exterior
2B
Soporte de lacenefa
Prepare la cenefa parala instalacin interior
3A
Instale los soportes parala instalacin interior
3B Alineelamuescadecadasoporteconlasmarcas
realizadasenelpaso1yasegresedequeestn
aescuadrayanivel,enformaparejadesdelaventana.
IMPORTANTE:Asegresedetenerencuentala ubicacin correcta de cada
soporte; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje
delossoportes(serecomiendautilizarlosagujeros ranurados); dos
tornillos por soporte.
Fijelossoportesenlaparedoenelmarcodela
ventanautilizandolossujetadorescorrectos.Siva a instalar una
cenefa, instlela entre los soportes
ylasupericiedemontaje,utilizandolosagujeros
guarealizadosenelpaso3A.
Contineconelpaso5.
Agujerosgua(2porsoporte)
Tornillos(2porsoporte)
Soportedemontajedelmboloderesorte
Soportesparaextremode control
Ejemplo:Instalacinenunmarcodemaderaconlostornillosproporcionados
e instalacin de cenefa opcional.
Cenefa(opcional)
Paracenefastipoalero,sigaconelpaso6.Paracenefasestndardeinstalacinexterior,siga
con el paso 7.
Instale la persiana enrollablesobre los soportes
5
Insertelaclavijaenelmbolo deresorte,enelagujeroque
estenelsoporteyencajela cortina en el soporte, oprimiendo
elmbolo.
Alineelosagujerosenforma de T que estn en el soporte de extremo
de control con las lengetasqueestnenel extremo de control del
rodillo y con el gancho orientado haciaabajo,comosemuestra.
Presione para trabar el gancho central en su lugar.
Silapersianaenrollableincluyetapasparasoportes, presinelos sobre
los soportes, como se muestra a continuacin.
Opcindelaespecialidadparamontaje
exteriorelegidoenlapocadelacompra.
Extraigalaenvolturadeenvodelrodillo.
Tapa
Instale las cenefas de instalacin exterior (no para todos los
modelos)
6ASilacenefanoincluyelosretornos,pasea6B.Para cenefas con
retornos envolvente: Extraigalacintadelatelaqueestenlaparte
posteriordelacenefayasegresedequelatela
seextiendaenformaparejasobrecadaextremo de la cenefa.
Deslicelaprensaesquineraenelpaneldelretorno.
Lalengetaencajarenloscanalesqueestnenla parte posterior del panel
del retorno.
Desliceelpaneldelretornoensambladosobreun
extremodelacenefa.Lalengetaencajarenlos canales que estn en la
parte posterior de la cenefa,
ylapartesuperiordelacenefaencajarenelcanal que est en la parte
superior del panel del retorno.
Envuelvalatelaenelextremodelpaneldelretorno.
Presionelastapasensulugar.
Repitaesteprocedimientoparaelotroextremo.
Una vez que ambos retornos estn instalados, tire de la tela
hasta que quede tirante para eliminar las
arrugasyparafijarlaparteposteriordelosretornos con cinta adhesiva
de papel.
Instale las cenefas de instalacin exterior (para los modelos sin
retornos)
6B
Centrelacenefasobrelapersianaenrollable y deslice la parte
superior del panel frontal de la cenefa en las prensas de la
cenefa, hasta queencajenensulugar.Puedeajustarel
espaciadodelacenefadesdelaparedaflojandolas tuercas mariposa que de
los soportes de la cenefa.
Cmofijarlacenefaenlossoportesdemontaje:
Return Panel
CornerClipCap
FabricWrap
Conecte el dispositivo de tensin (slo control del cadena)
7
Consultelasinstruccionessobre el dispositivo para mantener la
tensin.
11R438_Levolor_Manual_Roller_Shades.indd 4 11/8/11 11:53 AM