Custom Metal-Cased Shaft Seals ISO 9002 Certified 24-48 Hour Manufacturing NBR, FKM, VMQ, ACM, HNBR, XNBR, EPDM, PTFE, FFKM, FELT and LEATHER Pressures to 25 BAR Sizes from 30mm to 1737mm & 1.2" to 68" OD Rotary Shaft Seals ISO Certified Manufacturing Metric sizes from 5mm - 1,400mm OD Inch sizes from 0.50'' - 98.75" OD Low tooling charges FDA and UL Mechanical Seals Replacement seals and parts for John Crane Durametallic, Flowserve, Burgmann & others Other Products V-Seals, Bonded Rubber Seals, Valve Stem Seals, O-rings, Rubber Molded Parts & Bushings Services Seal Design Prototyping Testing Failure Analysis Application Consulting
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Custom Metal-Cased Shaft Seals ISO 9002 Certified 24-48 Hour Manufacturing NBR, FKM, VMQ, ACM, HNBR, XNBR, EPDM, PTFE, FFKM, FELT and LEATHER Pressures to 25 BAR Sizes from 30mm to 1737mm & 1.2" to 68" OD
Rotary Shaft Seals� ISO Certified Manufacturing Metric sizes from 5mm - 1,400mm OD Inch sizes from 0.50'' - 98.75" OD� Low tooling charges� FDA and UL
Mechanical Seals Replacement seals and parts for John Crane Durametallic, Flowserve, Burgmann & others
Other Products V-Seals, Bonded Rubber Seals, Valve Stem Seals, O-rings, Rubber Molded Parts & Bushings
Services Seal Design Prototyping Testing Failure Analysis Application Consulting
NITRILE (NBR) General, all-purpose material, excellent for most mineral oils and greasesSpeeds to 18 m/sTemperature range -40º to +120ºC
FLUOROCARBON (Viton)Excellent for high temperature applicationsSpeeds to 35 m/sResistant to most of the special lubricants and chemicals that destroy nitrile, polyacrylates, or siliconesSuperior performance and wear in heat and harsh environmentsTemperature range -40º to +200ºC
SILICONE (VMQ)Excellent for low temperature capabilitiesSpeeds to 35 m/sNot to be used in dry running conditionsTemperature range -50º to +170ºC
POLYTETRAFLUOROETHYLENE (PTFE)Excellent for wide temperature range from -85º to +235ºCSpeeds to 45 m/sRuns in dry conditions – very low friction coefficientOutstanding resistance to chemicals
URETHANE (AU or PU)Suitable for use in hydraulic oilsTemperature range is -20º F to 210º FAvailable in 80 or 93 durometer Shore A hardness
Seal MaterialsSeal Types
Piston Seals
Wiper
U-Cups
Vee Sets
Guide Ring
Wear Ring
Rod Seals
Other materials such as Delrin, Phenalic, Polyamide(PA), acetal(POM),graphite-filled PTFE, and other styles of hydraulic seals are available upon request.
Hydraulic seals are available in inch and metric sizes. Japanese hydraulic seals are also readily available.
Related Documents
