Custom Medium and LV Switchgear 5-38kV • Switchgear Power Systems www.switchgearpower.com Generator Controls, Paralleling Switchgear, LV Switchboards • States Mfg. www.statesmfg.com Transformers (Substation and Specialty) • Vantran Ind. www.vantran.com Medium Voltage Fuses to 35kV PV Fuses • SIBA Fuse www.sibafuses.com Cable Bus • Superior Bus www.superiortray.com Power Transformers, 5MVA - 40MVA5kV - 72kV • Hyundai www.hhiamerica.com Concrete Buildings and Wall Systems • Modular Connections www.modularconnections.com
46
Embed
Custom Medium and LV Switchgear 5-38kV - Tri-S Electrical PPT 9.29.pdf · Custom Medium and LV Switchgear 5-38kV ... Substation and Distribution ... Stainless Steel Outdoor Mini Substation,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Custom Medium and LV Switchgear 5-38kV • Switchgear Power Systems www.switchgearpower.com
Generator Controls, Paralleling Switchgear, LV Switchboards • States Mfg. www.statesmfg.com
Transformers (Substation and Specialty) • Vantran Ind. www.vantran.com
Medium Voltage Fuses to 35kV PV Fuses • SIBA Fuse www.sibafuses.com
Cable Bus
• Superior Bus www.superiortray.com
Power Transformers, 5MVA - 40MVA5kV - 72kV
• Hyundai www.hhiamerica.com
Concrete Buildings and Wall Systems • Modular Connections www.modularconnections.com
We Compliment the Major OEMs, Not Compete With Them!
Custom Equipment Often Saves Money
Improves Profit and Productivity
• Shorter Lead times
• Fewer Sections = Less Space
• More Factory Assembly = Less install time
• Combined Equipment and Components
• 5 Year Standard Warranty
Power Distribution Centers & Control Buildings
Flexible Choices:
We offer PDCBs completely furnished with all materials and equipment supplied and
installed by us at our factory.
We will install materials at our factory supplied by you.
We will ship a PDCB to a designated location for equipment-installation by others.
Or any combination of these options.
• Mild steel, stainless steel, or aluminum construction; pier, pad,
or skid mounted.
• Complete integration of power and control wiring.
• Third party certification, seismic ratings, wind ratings, etc.
Power Distribution Centers & Control Buildings
Flexible Options:
Cargill Stainless Steel VFD Building
27kV VCBs, Arc Mitigation System
Power Distribution Centers-Light Rail
Applications
Substation Control Buildings (Control
House, Electrical House, E-House)
Battery Buildings
Switchgear Buildings
RTU Enclosures
SCADA Enclosures
Generator System Enclosures
MCC Enclosures
VFD Enclosures
Air Monitoring Buildings
Communication Shelters
Pump Station Enclosures
Disaster Recovery Centers
Material Storage Buildings
Concrete Buildings and Wall Systems
BALLISTIC PROTECTION MEETS BEAUTY
Ultimate Equipment and & Personnel Protection
Capacitor Banks 600V-38kV Power Factor Correction/Harmonic Filters
Fixed, Stepped, Substation and Distribution
Features and options per your exact
requirements.
Metal–Enclosed Capacitor banks are a
safer option and require less space than
open rack style capacitors
Capacitor Banks
Metal Enclosed / Metal Clad Switchgear (Hybrid) 2.4-38kV (max)
Switches / Circuit Breakers
15kV, 1200 amp custom gear on a nine
week lead time. No shipping splits. NEMA
3R. For a data center.
Switches and breakers from the same plant
without transition sections and delays
5kV Drawout MCC Front Access
Power factor correction capacitors for motors
Across the line Drawout AMVAC Contactors (out of cell maintainable)
5 year-100,000 Operations
11 gauge 304L Low Carbon Stainless steel
•5-Year Warranty
•ANSI C57.12.29 Paint
•Distribution Feeders and
Motor Protection Relays
in one Line-up.
Distribution Feeder Protection and Motor Starting in one lineup
Hybrid MV Drawout Motor Control Center
Relays & Controls
•5kV ABB AMVAC Breakers
•Stainless Steel Construction
•Capacitors
•Front Access Only
Metal Enclosed Switchgear
2.4 -38kV
Free Standing Design and Build or Add to Existing Expert Field Measuring services
Mild steel, stainless steel or aluminum construction
NEMA 1, 3R, 4, 4X, 12, Non Walk-in & Walk-in Isle
Metal Enclosed / Metal Clad Switchgear (Hybrid)
2.4-38kV (max)
Switches / Circuit Breakers
•15 kV Vacuum CB main
•Switch & Fuse Feeders
•NEMA 3R
New T4 Arc Quencher Technology is the Ultimate Solution for Mitigating Arc Flash Hazards!
Applications include Low and Medium Voltage (15kV) Switchgear and Medium Voltage Starters
•Meets IEEE C37.20.7-2007 Arc Flash Requirements, while delivering many more benefits than traditional arc resistant / arc
redirection switchgear.
•PROVIDES the most effective solution for meeting NFPA-70E 2015 requirements for arc flash risk assessment requirements.
•Guaranteed low-voltage arc quenching in 3 milliseconds
•Guaranteed medium-voltage arc quenching in 6 milliseconds (up to 15kV)
•GUARANTEED PPE Category 0: fire-rated (Arc Flash) personal protective equipment (PPE) is not required, even when doors
open (exposed ) and energized!
•GUARANTEED less than 1.2 calories per cm2 of arc flash incident energy, when open (exposed) and energized.
•MAXIMIZES system reliability and uptime. (Your equipment survives)
•PROVIDES additional arc flash mitigation or protection to downstream assets, such as VFDs, MCCs, or Control Panels.
•MINIMIZES system equipment damage and down time.
•LESS EXPENSIVE to purchase, install and maintain than traditional arc resistant / arc redirection switchgear
•SMALLER, takes less floor space and height, no duct works and venting concerns.
•Adapdable to many existing installations
Switchgear Power Systems T4 Arc Quenching Switchgear New Technology Provides the Safest Switchgear Available!
Meets IEEE C37.20.7-2007 Arc Flash Requirements
Switchgear Power Systems T4 Arc Quenching Switchgear New Technology that Provides the Safest Switchgear Available!
Meets IEEE C37.20.7-2007 Arc Flash Requirements
Metal Enclosed /Metal Clad Switchgear
ANSI/IEC Design 2.4 -38kV
ANSI/IEC Design 5kV Vacuum Circuit Breakers Interlocked With Ground Switches.
Seismic Zone 4 Rated. Bilingual Markings, Indoor NEMA 1
Metal Enclosed Switchgear
2.4 -38kV
Special Height-Short Cycle Delivery
OEM Component Combinations
This 5kV, special height (78") switchgear required a
unique arrangement of terminating in and out of the
top of the switchgear. The additional requirements
of fitting an existing space and shipping in under
four weeks from date of order did not pose a
problem for SPS. PowerCon switches and
Eaton/Cutler - Hammer fuses were utilized in this
design.
Metal Enclosed, Current Limiting Protectors 13.8 KV – 2000 Amp Stainless Steel with Bypass
www.SwitchGearPo
Utility Primary Metering
EUSERC Compliant Metering
Utility Acceptance
This NEMA 3R metal clad switchgear with
a metering cubicle manufactured in strict
accordance with the local Utility Company
on the East Coast. SPS specializes in
meeting local utility company metering
requirements.
Paralleling Switchgear, Generator Controls.
Low and Medium Voltage
2500A 277/480V two engine (Cat 750KW) emergency paralleling switchboard
•Emergency Stand-by
•Utility Paralleling
•Wall and Generator Mount Control Panels
•Generator Mounted Circuit Breakers
•UL 891 and UL 891 Draw-out
•Custom Designs
•Flexibility and Rapid Response
Typical Generator Upfit for Side view of generator showing Typical generator cogen switch Rear view of the switchboard to the left.
Portable use; selectable voltages voltage-selector switch. 480 V, up to 3000A.
And plug-in cables.
Typical Upfit of generator for Typical generator transfer switch, 480V, 3000A
Portable use; separate breakers “soft or closed transition” for use in a hospital. Metering
For various outputs. is through the protective relay (Schweitzer) and Ez-Gen Controller.
Custom Capabilities
Engineering
Support
Reliable
Flexible
Rapid Response
Experience
AMEX System Control and Breaker Control
Highway Lighting and Control Panels,
Specialty Enclosures and Assemblies
DOT Highway Lighting panel
Stainless Steel Control Cabinet
Generator Breakers, Custom
Enclosures
UL 508 Control Panels
Special Enclosures & Assemblies
SPS works closely with our customers in providing enclosures in all NEMA ratings/classes in all types of materials. Whether it is an empty enclosure or complete packages, SPS can supply all, or a portion of the apparatus, or they will install your supplied equipment. SPS will work with you to meet your project needs.
• Stainless Steel unitized substations, metal enclosed, and metal clad switchgear for ship to shore and rubber-tired gantry cranes.
Transformer Disconnects
2.4-38kV Flexible Options:
Mild steel, Stainless Steel, or Aluminum Construction; NEMA 1, 3R, 4, 12
Close Coupled Cable or Bus Connections to Oil or Dry Type Transformers
34.5kV Transformer Disconnects,
match and line up to Howard Industry
transformers. (8 week delivery)
•Selector Switching
•Metering-Utility or Customer
•Switches or Breakers
Meeting Specifications These 15kV, NEMA 3R, non-fused transformer disconnects
were supplied to match up to new Cooper Power Systems
Transformers.
Direct-drive side operated ABB switches, concealed hinges
and flex connectors, were specific requirements in satisfying
the specifications
for this project.
Colors and Devices This 15kV transformer disconnect required special paint; ventilation; gasketed covers; a fixed Eaton VCP-T circuit breaker and a GE Multilin relay in a NEMA 3R design to match up with a dry type transformer from Virginia Transformer.
Stainless Steel Outdoor Mini Substation, Customer & SPS Supplied Components
Unitized Substations 34.5-4.16kV
Skid Mounted / Portable
• Our custom capabilities and flexibility enables us to offer the marketplace a wide
variety of options and designs in skid mounted gear.
Pad Mounted Switchgear
2.4-38kV 200-1200 amp
• Unique Configurations This dead front 15kV, 600 amp switch with four feeder switches and a tie switch includes unique features such as: visible break on all switches; S&C switches; welded, stainless steel construction; powder coat paint to 5 mils DFT; copper bus bar.
Pad Mounted Switchgear
2.4-38kV (max) Dead-Front : Switches/Fuses
Before, Oil Insulated
After, Air Insulated
Stainless Steel & Custom Brown Paint
Pad Mounted Primary Metering 2.4-38kV (max) Dead-Front, 200 or 600 Amps
35kV Double Dead-Front” Meter Station Group-Operated Switching for Visible Disconnect
Flexible Options:
Mild Steel; Stainless Steel; Live Front,
Dead Front; Special Colors; Special
configurations
Pad-Mounted, Air-Insulated Switchgear
2.4-38kV (max)
15 kV (72”High) Stainless Steel
Manual and Motor –Operated Switches/Fuses/Ground
Switches
ANSI production testing on all units
NETA certified personnel hi potential and Meggar test
all units
IT ratio and polarity verification
Relay protection scheme verification
Phase rotation testing on VT’s and CPT’s
Full in-house ANSI rain test capabilities
Quality Assurance
Switchgear Retrofit, Replacement
•Iso-Phase and Non-Seg Bus Manufacturing and Repair
•Transformer Supply, Repair and Oil Services
•Relay Testing and Upgrade
•Breaker Repair/Replace
•Turnkey Installation Commissioning and Testing
•Engineering and Project Management
Custom Equipment Often Saves Money
Improves Profit and Productivity
• Shorter Lead times
• Fewer Sections = Less Space
• More Factory Assembly = Less install time
• Combined Equipment and Components
• 5 Year Standard Warranty
We Compliment Our OEM Partners, Not Compete With Them!