CUSTOM ACTA-BACK DEEP - FULL ORDER FORMd37xlajmpyyml6.cloudfront.net/comfort_designs/long_forms/Custom CD... · CUSTOM ACTA-BACK® DEEP ... For best results, do not fill out in your

CUSTOM ACTA-BACK® DEEP - FULL ORDER FORMHCPCS CODE: E2617

509 S. 22ND AVENUE | BOZEMAN, MT | PH. 800.564.9248 | FAX. 406.522.8563 | COMFORTCOMPANY.COM

Additional Information:

P.O. Number:

Requested By:

Phone: Fax:

Email:

Ship To:

A - Back Support Width

B - Back Support Length

C - Width Between Lateral Trunk Supports

D - Width Between Lateral Thigh Supports

E - Seat Width

F - Seat Depth

G - Effective Seat Depth

H - Lateral Trunk Support Height

1/7

CUSTOMER/PATIENT INFORMATION

SEATING SYSTEM MEASUREMENTS

NOTE:Seating system measurements do not affect any selections made through the order form.

Order #:

E

A

C

D

F

G

B

H

CD

-AC

TA-B

AC

K-D

EE

P-F

OR

M R

EV

0418

Date:

Company Name/ACCT #:

Patient Name:

Patient Weight:

Patient Height:

Patient Reference:

Seat Frame Width:

Seat Frame Depth:

Seat Rail Tube Size:

W/C Manufacturer:

Model #: Serial #:

For best results, do not fill out in your browser. Interactive form should be completed using Adobe Reader after saving to your local drive. Then email to [email protected] or print and fax to 1.406.522.8563.

1.1 BACK SUPPORT SIZE

CUSTOM ACTA-BACK® DEEP SIZE & COVER MATERIAL1

C - D - W H

HCPCS CODE: E2617

Custom Back Support Part Number:

LEN

GTH

*

FRAME WIDTH

C-D-12W22H C-D-14W22H C-D-16W22H C-D-18W22H C-D-20W22H C-D-22W22H C-D-24W22H C-D-26W22H C-D-28W22H





C-D-12W12H C-D-14W12H C-D-16W12H C-D-18W12H C-D-20W12H C-D-22W12H C-D-24W12H C-D-26W12H C-D-28W12H12”

14”

16”

18”

20”

22”

12” 14” 16” 18” 20” 22” 24”

LATERAL WIDTH ADJUSTMENT (BASED ON 1 ½” THICK FOAM SELECTION)

2/7

11” Ma x.9” Mi n.

13” Ma x.11” Mi n.

15” Ma x.13” Mi n.

17” Ma x.15” Mi n.

19” Ma x.17” Mi n.

9” Ma x.7” Mi n.

21” Ma x.19” Mi n.

$106900 $117500

$120

600

$173400

26” 28”

12-20” Width / 12-18” Length = $1069.00 Base Price21-24” Width / 12-18” Length = $1175.00 Base Price12-24” Width / 19-22” Length = $1206.00 Base Price25-28” Width / 12-22” Length = $1734.00 Base Price

CD-ACTA-BACK-DEEP-FORM REV0418

Select the desired back support size clicking on the corresponding box below or filling in the specific width and length measurements in the “Custom Back Part Number” box.

INSTRUCTIONS:

Order #:

*Length (L) refers to the actual size dimension of the support from bottom to top edge.

NOTE: Desired back support length is “H” dimension in part number above.

12” WIDTH12”WIDTH

4”

16”WIDTH

8”

20”WIDTH

12”

14”WIDTH

6”

18”WIDTH

10”

22”WIDTH

14”

24”WIDTH

16”4” 6” 8” 10” 12” 14” 16”

14” WIDTH 16” WIDTH 18” WIDTH 20” WIDTH 22” WIDTH 24” WIDTH

EXAMPLE OF ACTA-BACK® DEEP GEOMETRY

*If desired size is not listed above, a 60% up charge will be applied for materials.

COVER FABRIC ACCENT FABRIC

STRETCH-AIR

DIAMOND(CD-STRETCH-AIR)

DIGI-CAMO (CD-DIGI-STRETCH-AIR)

COMFORT-TEK

DIAMOND(CD-COMFORT-TEK)

DIGI-CAMO (CD-DIGI-COMFORT-TEK)

Cover appearance may vary with hardware selection.

1.2 COVER MATERIAL OPTIONS* REQUIRED * MSRP $0.00

- OR -

- WIT

H -

DIAMOND OR DIGI-CAMO

ACCENT FABRIC

Choose either DIAMOND or DIGI-CAMO accent fabric. Care

for each fabric is identical.

COMFORT-TEKTM

Comfort-Tek is a smooth, easily cleaned surface. The fluid protection

aids in infection control.

STRETCH-AIRTM

Stretch-Air has comfortable stretch, air transmission and heat dissipation. It is not fluid resistant.

MILITARY BRANCHPATCH (OPTIONAL)MSRP $0.00

1.3

Air Force (CD-AIR-FORCE-PATCH)

Army (CD-ARMY-PATCH)

Marines (CD-MARINES-PATCH)

Navy (CD-NAVY-PATCH)

Patch Placement

3/7

BACK SUPPORT OPTIONS3

Order #: CD-ACTA-BACK-DEEP-FORM REV0418

3.1 MOLDABLE ALUMINUM STAYS

FRONT VIEW

A

Aluminum Stay Pockets

Moldable Aluminum Stays

Moldable Aluminum Stays

INSTRUCTIONS:

Select the spacing between the moldable aluminum stays.

A standard alignment has been optimized based on back support width if you choose not to select a specific width between the stays.

Custom options are available by selecting your desired spacing below.

A =1” (CD-STAY-1.0)

A =1 ½” (CD-STAY-1.5)

A = 2” (Standard Alignment) (CD-STAY-2.0)

A = 2 ½” (CD-STAY-2.5)

A = 3” (CD-STAY-3.0)

A = 3 ½” (CD-STAY-3.5)

A = 4” (CD-STAY-4.0)

A = 4 ½” (CD-STAY-4.5)

Specify Custom Spacing _____ (CD-STAY-OTHER)

None (CD-STAY-NONE)

SPACE BETWEEN STAYSMSRP $0.00

FOAM TYPE

H.R. Medium

H.R. Soft

ViscoolTM Medium

ViscoolTM Soft

ViscoolTM X-Soft

Visco XX-Soft

REAR LAYER (REQUIRED)

H.R. MSRP $0.00Viscool & Visco MSRP $138.00

MIDDLE LAYER(OPTIONAL)


TOPPER LAYER(OPTIONAL)


¼” ½” ¾” 1” 1¼” ¼” ½” ¾” 1” 1¼” ¼” ½” ¾” 1” 1¼”

(CD-Rear-HRM-0.25)

(CD-Rear-HRM-0.50)

(CD-Rear-HRM-0.75)

(CD-Rear-HRM-1.00)

(CD-Rear-HRM-1.25)

(CD-Mid-HRM-0.25)

(CD-Mid-HRM-0.50)

(CD-Mid-HRM-0.75)

(CD-Mid-HRM-1.00)

(CD-Mid-HRM-1.25)

(CD-Top-HRM-0.25)

(CD-Top-HRM-0.50)

(CD-Top-HRM-0.75)

(CD-Top-HRM-1.00)

(CD-Top-HRM-1.25)

(CD-Rear-HRS-0.25)

(CD-Rear-HRS-0.50)

(CD-Rear-HRS-0.75)

(CD-Rear-HRS-1.00)

(CD-Rear-HRS-1.25)

(CD-Mid-HRS-0.25)

(CD-Mid-HRS-0.50)

(CD-Mid-HRS-0.75)

(CD-Mid-HRS-1.00)

(CD-Mid-HRS-1.25)

(CD-Top-HRS-0.25)

(CD-Top-HRS-0.50)

(CD-Top-HRS-0.75)

(CD-Top-HRS-1.00)

(CD-Top-HRS-1.25)

(CD-Rear-VIS-M-0.50)

(CD-Rear-VIS-M-1.00)

(CD-Mid-VIS-M-0.50)

(CD-Mid-VIS-M-1.00)

(CD-Top-VIS-M-0.50)

(CD-Top-VIS-M-1.00)

(CD-Rear-VIS-S-0.50)

(CD-Rear-VIS-S-1.00)

(CD-Mid-VIS-S-0.50)

(CD-Mid-VIS-S-1.00)

(CD-Top-VIS-S-0.50)

(CD-Top-VIS-S-1.00)

(CD-Rear-VIS-XS-0.50)

(CD-Rear-VIS-XS-1.00)

(CD-Mid-VIS-XS-0.50)

(CD-Mid-VIS-XS-1.00)

(CD-Top-VIS-XS-0.50)

(CD-Top-VIS-XS-1.00)

(CD-Rear-VIS-XXS-0.50)

(CD-Rear-VIS-XXS-1.00)

(CD-Mid-VIS-XXS-0.50)

(CD-Mid-VIS-XXS-1.00)

(CD-Top-VIS-

XXS-0.50)

(CD-Top-VIS-

XXS-1.00)

¼” Crosslink foundation layer will come standard on all back supports.

For other foam combinations call Customer Service 1.800.564.9248.

2.1 CUSTOM FOAM SELECTION

NOTE:

FOAM OPTIONS2M

SRP

$0.

00M

SRP

$13

3.33

REAR LAYER

MIDDLE LAYER

TOPPER LAYER

INSTRUCTIONS:Select only one type of foam per layer.

Indicates standard Acta-Back® Deep foam configuration. May use as a reference when choosing foam layers.

This back support comes with two patented aluminum stays that can be molded to support spinal curvature.

Stays are offset from the spine and are held in place by pockets sewn into the rear of the cover.

NOTE:

The stays are accessible while the user is seated against the back support through the zipper located at the top of the back support.

4/7Order #: CD-ACTA-BACK-DEEP-FORM REV0418

*Power Mount Bracket required for all power chairs listed below.

4.1 SINGLE LATERAL DEPTH

NOTE:

Laterals are mounted at a fixed height position. Laterals are width and angle adjustable.

Lateral pad height changes with different depth selections.

If different wing height location is needed, please make comments in Section 6.1.

L LATERAL DEPTH R

(CD-DEEP-LAT-L-OMIT)

Omit Lateral (CD-DEEP-LAT-R-OMIT)

(CD-DEEP-LAT-L-3)

3”D = (5”L) (CD-DEEP-LAT-R-3)

(CD-DEEP-LAT-L-5)


(CD-DEEP-LAT-L-7)


INSTRUCTIONS:Select depth of lateral desired from the options below.

MSRP $0.00

H

D

THORACIC LATERAL SUPPORT4

TYPICAL WING HEIGHT MOUNTING CHART

12” 14” 16”

18” 20” 22”

If different wing height location is needed, please make comments in Section 6.1.

12”

9”5”

14”

11”

16”

12”7”

18”

13”7”

20”

13”7”

22”

14”7”

5”

*Length (L) refers to the actual size dimension of the support from bottom to top edge.

COLOR (OPTIONAL)

NOTE:Accent colors can be applied via colored piping that is stitched to the flaps of the back support. If no colors are selected, our standard silver reflective piping will be used.

Red (CD-RED) Blue (CD-BLUE)

Purple (CD-PURPLE) Green (CD-GREEN)

Pink (CD-PINK) Remove (CD-REMOVE)

Orange (CD-ORANGE)

EMBROIDERY (OPTIONAL)

Fill out Sections A, B, & C.

WORD ONE

THREAD COLOR OPTIONS

Red (CD-EMB-RED) Blue (CD-EMB-BLUE)

Purple (CD-EMB-PURPLE) Green (CD-EMB-GREEN)

Pink (CD-EMB-PINK) Silver (CD-EMB-SILVER)

WORD TWO

- AND/OR -

A.

B.

C.

3.5 PRIVACY FLAP (OPTIONAL)

Privacy Flap (CD-PF-CV)

NOTE:This flap connects with hook & loop attach-ment between the seat and back support for added privacy.

INSTRUCTIONS:

MSRP $0.00 MSRP $0.00

MSRP $35.00

Privacy Flap

FONT/STYLE OPTIONS

Helvetica (CD-EMB-Helvetica) (CD-EMB-Twilight)

Garamond (CD-EMB-Garamond) (CD-EMB-Script)

Color Location

Placement of the piping may vary by back support size and mounting hardware.

3.2 HARDWARE OPTIONS NOTE: Quick Release and Fixed hardware are adjustable for height, depth, width and angle of recline. Fixed requires tools for removal. 4-Point is designed to provide extra support for users with tone and for back supports 24” wide or greater. Compass® 4 hardware may be installed on 3/4”, 7/8”, 1”and 1 1/8” tubing. Power Mount Bracket is height adjustable up to 8” in 1/2” increments but may be limited by the chair.

COMPASS® 4 FIXED

(2 POINTS OF ATTACHMENT)MSRP $0.00

Fixed (2 point)(CD-NQ-COMPASS)

COMPASS® 4 FIXED


Fixed (4 point)(CD-NQ-COMPASS4)

COMPASS® 4 QUICK RELEASE


Quick Release (2 point)(CD-Q-COMPASS)

COMPASS® 4 QUICK RELEASE


Quick Release (4 point)(CD-Q-COMPASS4)

Quick Release Lever for Removal

Bolts Together

4 POINTTOP VIEW

4 POINTTOP VIEW

COMPASS® 4 BUNDLE MSRP $466.67 (2 PT, 4 PT, FIXED & QUICK RELEASE)

Compass Bundle(CD-COMPASS-BUNDLE)

4 Point hardware is not available on 12”W or narrower back supports and may not fit all smaller back support lengths.

3.3 3.4

COMPASS® POWER MOUNT BRACKET

MSRP $515.00

Quantum w/ Tru Balance 3(CD-PMB-QUANTUM)

Permobil w/ Corpus 3G(CD-PMB-PERMOBIL)

Quickie w/ 3.7 Power(CD-PMB-QUICKIE)

Avid Rehab w/ Power T & R(CD-PMB-AVID)

Rovi w/ Motion Concepts*(CD-PMB-ROVI)

(Not available on back supports smaller than 12”L or 12” W, or sizes

12Wx16L & 12Wx18L)

*Using Compass® Power Mount on Rovi requires mounting to the RECESSED PLANAR INTERFACE PLATE available when ordering the Motion Concepts

Seating System. Drilling is required for mounting.

CD-ACTA-BACK-DEEP-FORM REV0418 5/7

14W x 5L Head Support Pad Pictured

BODILINK® HEAD SUPPORTHARDWARE & PADS5

COMFORT-TEK FOR FLUID PROTECTION & AN EASILY CLEANED

SURFACE.

FOR AIR TRANSMISSION & HEAT DISSIPATION.

STRETCH-AIR

FOR SKIN PROTECTION & SHEAR REDUCTION. NOT FLUID RESISTANT.

L

5.2 PREMIUM PAD COVER MATERIAL

GlideWear® (GLIDEWEAR) (add $26.00)

Comfort-Tek (COMFORT-TEK)

Stretch-Air (STRETCH-AIR)

Length (L) refers to the actual size dimension of the support from bottom to top edge.

PREMIUM PAD SIZE HCPCS CODING: E0955 MSRP $237.00

5.1

Premium Head Support Pads angles can be

formed by adjusting the plates in the pad.

• You may make one selection per column.• Choose between premium (5.1) -or- basic (5.3).• Choose a cover material in 5.2 -or- 5.4.

6W x 3LSoft BL-HSP1-6W3L

Extra Soft BL-HSP2-6W3L

8W x 4LSoft BL-HSP1-8W4L


10W x 5Lwith adjustable wings

Soft BL-HSP1-10W5L



Soft BL-HSP1-12W5L



Soft BL-HSP1-14W5L



Soft BL-HSP1-18W5L


W

W

Pad Firmness

L

L

L

L

L

COMFORT-TEK FOR FLUID PROTECTION & AN EASILY CLEANED

SURFACE.

FOR AIR TRANSMISSION & HEAT DISSIPATION.

STRETCH-AIR

5.4 BASIC PAD COVER MATERIAL

Comfort-Tek (COMFORT-TEK)

Stretch-Air (STRETCH-AIR)

Basic head support pads can be formed

to any shape using the moldable steel insert

inside the pad.

BASIC PAD SIZE HCPCS CODING: E0955 MSRP $129.00

5.3

6W x 5L BL-HSP3-6W5L






L

L

L

L

L

L

W

W

Length (L) refers to the actual size dimension of the support from bottom to top edge.

5.5 HEAD SUPPORT HARDWAREHCPCS CODING: E1028

SIZE & SHAPE MSRP PART NUMBER

MID 6 $223.00 (BL-HS-PT1RMMID6)

LAT 6 $260.00 (BL-HS-PT1RMLAT6)

MID 8 $223.00 (BL-HS-PT1RMMID8)

LAT 8 $260.00 (BL-HS-PT1RMLAT8)

MAX 8* $327.00 (BL-HS-PT1RMMAX8)

*Provides the greatest amount of articulation and range of motion.

PT HARDWARE, REMOVABLEA.

PT

HA

RD

WA

RE

, M

ID 6

PT

HA

RD

WA

RE

, L

AT

6

PT

HA

RD

WA

RE

, M

ID 8

PT

HA

RD

WA

RE

, L

AT

8

PT

HA

RD

WA

RE

, M

AX

8

• You may make one selection per column in either A -or- B.• If choosing 5.5 A, choose a stem length option next.• Choose which mounting block option you require in 5.6.

PT MODEL

TOTAL # OF

LINKS

TOTAL LINK

LENGTH

MAX. ANTERIOR

REACH

MAX. POSTERIOR

REACH

MAX. LATERAL REACH

MID 6 2 6” 5.5” 1” N/A

LAT 6 3 6” 5.5” 1” 6”

MID 8 2 8” 7.5” 1” N/A

LAT 8 3 8” 7.5” 1” 8”

MAX 8 4 8” 7.5” 3” 8”

PT HARDWARE RANGE OF MOTION


PT HARDWARE, REMOVABLE (CONTINUED)

STEM LENGTH MSRP PART NUMBER

STANDARD 7” STEM $0.00 (HS-STEM-7)

**3” STEM $0.00 (HS-STEM-3)

PT HARDWARE, STEM LENGTH OPTION

PT

ST

EM

, 3

”

SIZE & SHAPE MSRP PART NUMBER

LATERAL $228.00 (BL-HS-GT3RMLAT)

MID-LINE $191.00 (BL-HS-GT3RMMID)

GT HARDWARE, REMOVABLEB.

GT

HA

RD

WA

RE

, L

AT

ER

AL

GT

HA

RD

WA

RE

, M

ID-L

INE

GT MODEL

TOTAL # OF

LINKS

TOTAL LINK

LENGTH

MAX. ANTERIOR

REACH

MAX. POSTERIOR

REACH

MAX. LATERAL REACH

LAT 5 10.5” 10” 2” 7.5”

MID 3 8.5” 8” 2” N/A

GT HARDWARE RANGE OF MOTION

MOUNTING BLOCK OR BRACKET MSRP PART NUMBER

POSTERIOR A MOUNTING BLOCK $0.00 (HS-MB-POSTA)MOUNTING BLOCK-

POSTERIOR A

5.6 HEAD SUPPORT MOUNTING OPTION

5.7 EXTRA HARDWARE

LINK LENGTH MSRP EXTRA PART

*EXTRA 2” LINK $57.00 (BL-HS-PT1LINK2)



TOOL-LESS WING LOCK MSRP EXTRA PART EXTRA PART EXTRA PART EXTRA PART

*1 LOCK $21.00/each (BL-HS-52WINGA1) (BL-HS-52WINGA1) (BL-HS-52WINGA1) (BL-HS-52WINGA1)

*FOR PT HARDWARE ONLY

ADDITIONAL MSRP EXTRA PART

1/4” SPACER PLATE $37.00/each (BL-HS-SPCRA)

ST

AN

DA

RD

P

T S

TE

M, 7

”

**3” Stem is recommended for use with power mounting where there may be special constraints with power chair functions


Section # Page # COMMENTS

SUBMIT BY EMAILSUBMIT BY EMAIL

CUSTOM ACTA-BACK DEEP - FULL ORDER FORMd37xlajmpyyml6.cloudfront.net/comfort_designs/long_forms/Custom CD... · CUSTOM ACTA-BACK® DEEP ... For best results, do not fill out in your

Documents