-
1
Curriculum Vitae
YUNN-LIN HWANG, Ph.D.
PERSONAL INFORMATION Work Address:
National Formosa University
Department of Mechanical Design Engineering
64, Wen-Hua Road, Huwei
Yunlin 63201, Taiwan, R. O. C.
Telephone: +886-56315339
Fax: +886-56363010
E-mail: [email protected] or [email protected]
PRESENT ACADEMIC RANK AND POSITION
Distinguished Professor, National Formosa University, Department
of Mechanical Design
Engineering
EDUCATION
Ph.D., Mechanical Engineering; 1992
University of Illinois at Chicago, Chicago, Illinois, U.S.A.
Dissertation: Recursive Projection Methods in Flexible Multibody
Dynamics
Advisor: Professor Ahmed A. Shabana MS., Mechanical Engineering;
1987
University of Colorado at Boulder, Boulder, Colorado, U.S.A.
B.Sc., Mechanical Engineering; 1984
Tamkang University, Tamsui, Taipei, Taiwan, R.O.C.
HONORS/AWARDS 1. Outstanding Students Award, Tamkang University,
1984
2. Excellent Young Investigator Award, Yunlin County, 1993
3. National Yunlin Polytechnic Institute Travel Award (1995)
4. Excellence in Engineering teaching Award, National Formosa
University (2000)
5. Excellent Paper Award of the 5th Precision Manufacturing
Congress of the Society of
6. Manufacturing Engineers (2006)
7. Graduate-School 2nd prize on 2011 Intelligent Machine-tools
topic competitions (2011)
8. Excellence Award on 1st Xutai Science and Technology Paper
Award and High Speed
Spindle Innovation Application Implementation Contest (2015)
9. Excellence Award on 2nd Xutai Science and Technology Paper
Award and High Speed
Spindle Innovation Application Implementation Contest (2016)
PREVIOUS PROFESSIONAL POSITIONS AND APPOINTMENTS Graduate
Teaching Assistant
Department of Mechanical Engineering, The University of Colorado
at Boulder, Boulder,
Colorado, 1986-1987
Department of Mechanical Engineering, The University of Illinois
at Chicago, Chicago,
Illinois, 1988-1992
Graduate Research Assistant
mailto:[email protected]:[email protected]
-
2
Department of Mechanical Engineering, The University of Illinois
at Chicago, Chicago,
Illinois, 1990-1992
Associate Professor
National Yunlin Polytechnic Institute, Department of Mechanical
Design Engineering,
Yunlin, Taiwan, 1992-1998
Department Chairman
National Yunlin Polytechnic Institute, Department of Mechanical
Design Engineering,
Yunlin, Taiwan, 1994-1997
Associate Professor
National Huwei Institute of Technology, Department of Mechanical
Design Engineering,
Yunlin, Taiwan, 1998-2003
Associate Professor
National Formosa University, Department of Mechanical Design
Engineering,
Yunlin, Taiwan, 2003-2008
Visiting Professor
University of Oregon, Department of Human Physiology,
Eugene, Oregon, U.S.A., 2008/7/1-2008/12/31
Professor
National Formosa University, Department of Mechanical Design
Engineering,
Yunlin, Taiwan, R.O.C., 2008-now
Distinguished Professor
National Formosa University, Department of Mechanical Design
Engineering,
Yunlin, Taiwan, R.O.C., 2019-now
PROFESSIONAL PERMANENT MEMBERSHIPS AND SOCIETIES
1. American Society of Mechanical Engineers
2. Chinese Society of Mechanical Engineers
3. Taiwan Society of Tribology Technology
4. Taiwan Association of Engineering and Technology
Innovation
5. Society of Theoretical and Applied Mechanics of the Republic
of China
6. Chinese Society of Sound and Vibration EDUCATIONAL
ACTIVITIES
Courses Taught at National Formosa University
Graduate courses:
Mechanical Vibrations, Dynamics of Multibody Systems, Nonlinear
System Analysis,
Dynamics of Machinery Systems, Design and Analysis of Mechanical
Systems
Undergraduate courses:
Statics, Dynamics, Kinematics and Dynamics of Machinery, Theory
of Mechanisms,
Homepage Design and Image Processing, Mechanical Vibration
Measurement and Analysis,
Computer Network, Engineering Program Design, 3D Dynamic
Graphing, Computer Graphic
Application, Introduction of Finite Element Analysis, Mechanism
Design, Theory of Robotics,
Computer-Aided Sketch, Gear Design, Mechanical Design, Mechanics
of Materials,
Thermodynamics, Mathematics of Engineering, Mechanical
Engineering Experiment (I): Solid
Mechanics, Materials of Mechanical Engineering, Machine Tools,
Analysis and Experiment of
Dynamic Systems
-
3
Research Trainees at National Formosa University Ph.D.
Students:
1. Van-Thuan Truong, Ph.D. (2015): The Dynamic Analysis and
Control of Multibody
Systems
2. Thi-Na Ta, Ph.D. (2019): The Investigation of Frictional
Contacts on Dynamic Analysis,
Control, and Optimization of Rigid-Flexible Coupled Multi-Body
Systems
3. Jung-Kuang Cheng, Ph.D. (Candidate): The Dynamic Analysis and
Research of Multi-
body Vehicle Systems
Master Students:
1. Zhen-You Wei, MS (2008): Inverse dynamics analysis and
control for deformable
robotic manipulators
2. Hsin-Hua Chen, MS (2009): The Vibration Analysis and Research
of Rotor Dynamic
Systems
3. Tzu-Shi Yang, MS (2009): The gait analysis and simulation of
biped robot
4. Chih-Wei Liao, MS (2010): Computer aided engineering in the
structural design and
flexible mechanism analysis of the door-type machine tools
5. Guan-Lun Hwang, MS (2010): Dynamic Analysis and Application
in Beam and Plate
Structure Products with CAE Technology
6. Wen-Chen Chiang, MS (2011): Dynamic Analysis and Study of
Machine Center
Structure Effected by Cutting Processing
7. Chi-Wei Chou, MS (2011): The investigation of simulating
spectrum analysis
instrument by using NI hardware and software
8. Zhao-Yu Liu, MS (2011): The Dynamic Control Simulation and
Research of the
Human Motion Systems
9. Yu-Chang Chang, MS (2011): The investigation in the dynamic
stiffness of the
structures and mechanisms of double column machining center
10. Guang-Yi Fan, MS (2012): Dynamic structural characteristic
analysis, testing and
improved design of the CNC machine tool
11. Cheng-Yu Yang, MS (2012): CAE Technology Used in the Dynamic
Analysis of Wind
Turbine
12. Yan-Hau Hwang, MS (2012): LS-DYNA Simulation, Analysis and
Application
13. Duc Nhat Chu, MS (2012): Using Nonlinear Recursive
Formulation on Dynamic
Analysis of Multi-body Systems
14. Shi-Hua Zhuang, MS (2012): Dynamic simulation and structural
analysis of the CD-
ROM drive
15. Xuan Mai Nguyen, MS (2013): The dynamic control analysis of
biomimetic
humanoid robot system
16. Pei-Hsuan Lai, MS (2013): The Dynamic Characteristic
Analysis of Rigid-Flexible
Coupling Structures of Virtual Machine-Tool
17. Chun-Wei Chang, MS (2013): The Dynamic Contact Analysis and
Simulation of
Virtual Machine-Tool
18. Cheng-Yang Song, MS (2013): The Application of CAE
Fluid-Solid Coupling
Analysis on Large-Scale Wind Turbine
19. Thanh-Dat Pham, MS (2014): The Dynamic Analysis and Control
of Industrial
Robotic Manipulators
20. Hong-Jhih Ke, MS (2014): The Computer-Aided Design and
Analysis of Mechanical
Energy Transform Machine
21. Xian-Ming Xu, MS (2014): The Computer-Aided Design and
Dynamic Analysis of
CNC Machine Tools
22. Tei-Wei Chen, MS (2014): The computer-aided design and
analysis of precision
-
4
carbide CNC band saw
23. Guan-Lin Lai, MS (2014): The Human Multi-Body Dynamic
Analysis and Research
24. Thi-Na Ta, MS (2014): The walking gait simulation and
control of biomimetic
humanoid robot system
25. Bo-Ming Lin, MS (2015): The Computer-Aided Design and
Analysis of High
Efficiency CNC Type Steel Manufacturing Process Plant Export
Band Saw Machine
26. Sin-Hao Liao, MS (2015): The Computer-Aided Design and
Dynamic Analysis of
Large Door-Type CNC Machine Tools
27. Yu-Xuan Liu, MS (2015): The Multibody Dynamic Analysis of
3-axis CNC Machine
Tools
28. Cao-Sang Tran, MS (2016): Dynamic Analysis and Control of
Hydraulic Machine
System and Industrial Robotic Manipulator
29. Van-Minh Dang, MS (2016): The Modal and Dynamic Analysis of
CNC Machine
Tools System
30. Jian-Fu Lai, MS (2016): The Computer-Aided Design and
Dynamic Analysis of
Vertical CNC Machine Tools
31. Wei-Sin Lin, MS (2017): The Computer-Aided Design, Analysis
and Research of
Power Chuck and Mechanical Particle Systems
32. Jie-Cih Peng, MS (2017): The Rigid-body and Flexible-body
Dynamic Analysis of
Vertical CNC Machine Tools
33. Yi-Ling Liu, MS (2017): The Rigid-Body and Flexible-Body
Dynamic Analysis of
CNC Double Column Machining Centers
34. Siang-Syun Lai, MS (2017): The Computer-Aided Design and
Vibration Modal
Analysis of Ultra-High-Speed Cutting Intelligent CNC Band Saw
and Double-Stroke
Mechanism
35. Yu-Wei Wu, MS (2018): Order Tracking Analysis and Modal
Experiment of Multi-
body Rotor Dynamic Systems
36. Jia-Hong Lin, MS (2018): Using Computer Aided Engineering
Analysis Softwares on
the Application of Multibody Dynamic Systems
37. Yu-Siang Jhong, MS (2018): The Computer-Aided Design and
Dynamic Analysis of
Vertical Machining Centers
Book Editor
1. Area Editor for Dynamics of Multibody Systems, John Wiley
& Sons, New York, 1st ed., 1992.
2. The Applications of RecurDyn Software in Multibody Dynamics,
Wu-Nan Publication Company, 1st edition, 2009.
3. The General Introduction and Practical Training of Mechanical
Vibrations, Wu-Nan Publication Company, 1st edition, 2009.
4. Multibody Dynamics Analysis and Application Based on RecurDyn
V9, Wu-Nan Publication Company, 1st edition, 2019.
Invited Reviewer for Scientific Journals
ASME Journal of Vibration and Acoustics, ASME Journal of
Mechanical Design, Int.
Journal of Mechanism and Machines Theory, Int. Journal of
Computer-Aided Design,
Journal of Material Science Forum, Journal of Nonlinear
Mechanics, Int. Journal of
Communications in Numerical Methods in Engineering, Journal of
the Chinese Society of
Mechanical Engineers, Int. Journal for Numerical Methods in
Engineering, Int. Journal of
Vibroengineering, Int. Journal of Advances in Mechanical
Engineering, Journal of Key
Engineering Materials, Journal of Applicd Mechanics and
Materials, Journal of Mechanics
-
5
Editor for Scientific Journals
Guest editor - "Microtribology, Adhesion and Surface Engineering
2018" in Journal
of Micromachines (SCI)
Guest editor - "Tribology of Materials and Analysis" in Journal
of Materials (SCI)
Lead guest editor - Special Collection on "Advances in Multibody
Dynamics and
Vibrations" in Journal of Advances in Mechanical Engineering
(SCI)
Guest editor - Special Issue "Microtribology, Adhesion and
Surface Engineering" in
Journal of Micromachines (SCI)
Lead guest editor - Special Issue on “Advances in Engineering
Tribology Technology”
in Journal of Advances in Mechanical Engineering (SCI)
Lead editor - Journal of Applied Mechanics and Materials -
Engineering Tribolody
and Applied Technology 2017 (EI)
Lead editor - Journal of Applied Mechanics and Materials -
Applied Technology and
Tribology (EI)
Lead editor - Journal of Key Engineering Materials - Engineering
Tribology and
Applied Technology 2016 (EI)
Lead editor - Journal of Key Engineering Materials - Tribology
Engineering 2014 (EI)
Grant Reviewer
National Science Council of Taiwan - Solid Mechanics,
Ministry of Economic of Taiwan - Technology Development
Program,
Ministry of Economic of Taiwan - Small Business Innovation
Research
National and International Service
Section Co-chair, the Fourth Symposium on Multibody Dynamics and
Vibration, ASME
2003 Conference, Chicago, USA, September 2-6, 2003.
Member of Scientific Advisory Committee and Section co-Chair,
2005 International
Conference on Advanced Manufacture, Taipei, Taiwan, December
2-5, 2005.
Section Co-chair, International Conference on Science &
Technology: Application in
Industry & Education, Pulau Pinang, Malaysia, December 8-10,
2006.
Member of International Scientific Advisory Committee and
Section co-Chair, the Ninth
International Conference on Automation Technology, Taipei,
Taiwan, June 13- 15, 2007.
Section Co-chair, Asia Pacific Conference on Optics Manufacture
2007, Hong Kong,
China, January 11-13, 2007
Technical Chairman, The First International Conference on
Engineering and Technology
Innovation 2011, Kenting, Taiwan, November 11-15, 2011.
Technical Chairman, The Second International Conference on
Engineering and
Technology Innovation 2012, Kaoshiung, Taiwan, November 2-6,
2012.
Technical Chairman, The International Applied Science and
Precision Engineering
Conference 2013, Sun Moon Lake, Natou, Taiwan, October 18-22,
2013.
http://www.mdpi.com/journal/micromachines/special_issues/ICETAT_2018http://www.mdpi.com/journal/micromachines/special_issues/ICETAT_2018http://www.mdpi.com/journal/materials/special_issues/Tribology_Materialshttp://journals.sagepub.com/page/ade/call-for-papers/special-issues/advances_in_multibody_dynamicshttp://journals.sagepub.com/page/ade/call-for-papers/special-issues/advances_in_multibody_dynamicshttp://www.mdpi.com/journal/micromachines/special_issues/microtribology_adhesionhttp://www.mdpi.com/journal/micromachines/special_issues/microtribology_adhesionhttp://journals.sagepub.com/doi/full/10.1177/1687814015624304http://journals.sagepub.com/doi/full/10.1177/1687814015624304https://www.scientific.net/AMMhttps://www.scientific.net/AMMhttps://www.scientific.net/KEM.739.-7https://www.scientific.net/KEM.739.-7https://www.scientific.net/KEM.642.-1https://www.scientific.net/KEM.642.-1http://www.scientific.net/KEM.642/bookhttp://www.scientific.net/KEM.642/book
-
6
RESEARCH INTERESTS Dynamics of Multibody Systems, Mechanical
Vibrations and Modal Analysis, Computer-Aided
Design, Computer-Aided Engineering, Biomechanics, Walking Robot,
Machine Tools
Technology
RESEARCH GRANT AWARDS: Awarded Extramural Research Grants
“Dynamic decoupling methods for the analysis of closed-loop
flexible multibody systems”, National Science Council of Taiwan,
NSC 83-0117-C-150-063-E, 8/1/1993-7/31/1994, NT$168,000.
Role: Principal Investigator
“Computer-aided design and manufacture of rotor mechanism
utilizing the geometric
differential formulation”, National Science Council of Taiwan,
NSC 84-2212-E-150-020 &
NSC 85-2212-E-150-002 , 8/1/1994-7/31/1996, NT$430,700.
Role: Principal Investigator
“Recursive mapping method using in the computer-aided dynamic
analysis of rigid and
deformable multibody systems”, National Science Council of
Taiwan, NSC 86-2212-E-150-
002 , 8/1/1996-7/31/1997, NT$215,000.
Role: Principal Investigator
“Dynamic analysis of spatial linkages mechanism”, National
Science Council of Taiwan,
NSC 84-2212-E-150-020 & NSC 87-2212-E-150-011 ,
8/1/1997-7/31/1998, NT$384,700.
Role: Principal Investigator
“Dynamic modeling and analysis of closed-loop flexible
mechanisms”, National Science
Council of Taiwan, NSC 90-2212-E-150-012 , 8/1/2001-7/31/2002,
NT$164,100.
Role: Principal Investigator
“Dynamic and modal analysis of vegetable food machine”, National
Science Council of
Taiwan, NSC 92-2622-E-150-008-CC3 , 6/1/2003-5/31/2004,
NT$529,600.
Role: Principal Investigator
“Dynamic and modal analysis of vegetable food machine”, National
Science Council of
Taiwan, NSC 92-2622-E-150-008-CC3 , 6/1/2003-5/31/2004,
NT$529,600.
Role: Principal Investigator
“Structure dynamic measurement and analysis of food machine”,
National Science Council
of Taiwan, NSC 93-2622-E-150-005-CC3 , 5/1/2004-4/30/2005,
NT$714,100.
Role: Principal Investigator
“The dynamic simulation and cycle life test of electric scooter
and power wheelchair”,
National Science Council of Taiwan, NSC 94-2622-E-150-003-CC3 ,
5/1/2005-4/30/2006,
NT$664,000.
Role: Principal Investigator
-
7
“Nonlinear recursive approach for dynamic analysis of flexible
mechanical systems”,
National Science Council of Taiwan, NSC 94-2212-E-150-020 ,
8/1/2005-7/31/2006,
NT$478,100. Role: Principal Investigator
“Dynamic simulation and vibration modal analysis of
multi-function auto-filled machine”,
National Science Council of Taiwan, NSC 95-2622-E-150-012-CC3 ,
5/1/2006-4/30/2007,
NT$672,000. Role: Principal Investigator
“CAD, CAM and CAE of multi-function roaster machine”, Ministry
of Education of
Taiwan, 5/1/2006-12/31/2006, NT$360,500. Role: Principal
Investigator
“Nonlinear recursive method for the inverse dynamic analysis and
control of flexible
mechanical systems”, National Science Council of Taiwan, NSC
95-2221-E-150-018,
8/1/2006-7/31/2007, NT$542,000. Role: Principal Investigator
“The CAD, CAM and CAE of LCD skew-angle control mechanism with
supported
structure”, National Science Council of Taiwan, NSC
96-2622-E-150-014-CC3 , 5/1/2007-
4/30/2008, NT$537,000. Role: Principal Investigator
Awarded Intramural Research Grants
1. National Formosa University Research Award 2004
“Dynamic analysis and vibration control of flexible structures:
Beam structure products”
2. National Formosa University Research Award 2007
“New formulations, applications and experiments in multibody
dynamics”
BIBLIOGRAPHY
Full Length, Peer-Reviewed, Original Articles (published &
in press)
1. Shabana A. A., Hwang Y. L., and Wehage R. A., 1992,
”Projection Methods in Flexible
Multibody Dynamics. Part I: Kinematics,” International Journal
for Numerical Methods in
Engineering, Vol. 35, pp. 1927-1939.
2. Wehage R. A., Shabana A. A., and Hwang Y. L., 1992,
”Projection Methods in Flexible
Multibody Dynamics. Part Ⅱ: Dynamics and Recursive Projection
Methods,” International
Journal for Numerical Methods in Engineering, Vol. 35, pp.
1941-1966.
3. Hwang Y. L., and Shabana A. A., 1992, ”Dynamic of Flexible
Multibody Space Cranes Using
Recursive Projection Methods,” Computers & Structures, Vol.
43, No. 3, pp. 549-563.
4. Shabana A. A., and Hwang, Y. L., 1993, ”Dynamic Coupling
Between the Joint and Elastic
Coordinates in Flexible Mechanism Systems,” International
Journal of Robotics Research, Vol.
12, No. 3, 1993, June, pp. 299-306.
5. Hwang, Y. L., and Shabana A. A., 1994, ”Decoupled
Joint-Elastic Coordinate Formulation for
-
8
the Analysis of Closed-Chain Flexible Multibody Systems,” ASME
Journal of Mechanical
Design, Vol. 16, pp. 961-963.
6. Hwang, Y. L., 1996, ”Dynamic decoupling methods for the
analysis of closed-loop flexible
multibody systems”, Journal of Technology, Vol. 11, No. 3, pp.
355-364.
7. Hwang, Yunn-Lin and Wang, Yueh-Chen, 2002, ”Recursive method
for the analysis of open-
loop flexible multibody systems”, Journal of National Huwei
Institute of Technology, Vol. 5,
pp. 97-106.
8. Hwang, Yunn-Lin, 2003, ”Kinematic analysis of spatial
deformable mechanisms using
Newton-Euler iteration method”, Journal of National Huwei
Institute of Technology, Vol. 6, pp.
89-98.
9. Hwang, Yunn-Lin, 2003, ”The vibration measurement and modal
analysis of spatial open-
loop deformable mechanisms”, MM Mechanical Technology Magazine,
2003, October, No.
224, pp. 148-155.
10. Hwang, Yunn-Lin, 2004, ”The validation of transverse
vibration modal properties for
cantilever beam”, Journal of National Formosa University, Vol.
1, pp. 147-154.
11. Hwang, Yunn-Lin, 2005, ”The vibration modal test and
analysis of beam structure products”,
Mechatronics Magazine, 2005, May, No. 81, pp. 136-140.
12. Hwang, Yunn-Lin, 2005, “A new approach for dynamic analysis
of flexible manipulator
systems,” Journal of Nonlinear Mechanics, Vol. 40, No. 6, pp.
925-938.
13. Hwang, Yunn-Lin, 2006, “Nonlinear recursive formulation for
kinematic and dynamic
analysis of robotic manufacturing systems,” Journal of Material
Science Forum, Vols. 505-
507, pp. 553-558.
14. Hwang, Yunn-Lin, and Huang, Shen-Jenn, 2006, “Kinematic and
Dynamic Analysis for
Closed-Loop Flexible Manufacturing Systems Using Nonlinear
Recursive Method,” Journal
of Material Science Forum, Vols. 505-507, pp. 1015-1020.
15. Hwang, S. J., Hwang, Y. L., and Lee, B. Y., 2006, “Using the
Taguchi-Grey approach to
optimize high speed end milling with multiple performance
characteristics,” Journal of
Material Science Forum, Vols. 505-507, pp. 835-840.
16. Hwang, Yunn-Lin, 2006, “Recursive Newton-Euler formulation
for dynamic manufacturing
analysis of open-loop robotic systems,” International Journal of
Advanced Manufacturing
Technology, Vol. 29, No. 5, pp. 598-604.
17. Hwang, Yunn-Lin, 2006, “Nonlinear recursive method to solid
deformable structure dynamic
problems,” International Journal of Communications in Numerical
Methods in Engineering,
Vol. 22, No. 9, pp. 975-1002.
18. Hwang, Yunn-Lin, 2006, “Kinematic and dynamic analysis of
open-loop mechanical systems
using nonlinear recursive formulation,” International Journal of
Communications in
Numerical Methods in Engineering, Vol. 22, No. 12, pp.
1129-1153.
19. Hwang, Yunn-Lin, 2006, “Dynamic recursive decoupling method
for closed-loop flexible
-
9
mechanical systems,” Journal of Nonlinear Mechanics, Vol. 41,
No. 10, pp. 1181-1190.
20. Hwang, Yunn-Lin, 2008, “Decoupling joint and elastic
accelerations in deformable
mechanical systems using nonlinear recursive formulations,”
International Journal for
Numerical Methods in Engineering, Vol. 73, Issue 2, pp.
273-295.
21. Hwang, Yunn-Lin, 2008, “Analysis of mechanical vibrations
and forces using amalgamated
decoupling method in multibody mechanical systems,”
International Journal of
Communications in Numerical Methods in Engineering, Vol. 24, No.
11, pp. 1553-1566.
22. Hwang Yunn-Lin, 2008, “Solid deformable multibody dynamic
problems in precision
manufacturing systems,” Key Engineering Materials, Vols.
364-366, pp. 873-878.
23. Hwang, Yunn-Lin and Wei, Zhen-You, 2008, “Dynamic analysis
and control of 3D flexible
mechanisms using nonlinear recursive method in multibody
automation systems,” Journal of
the Chinese Society of Mechanical Engineers, Vol. 29, No. 2, pp.
121-127.
24. Hwang Yunn-Lin, 2008, “Solid deformable multibody dynamic
problems in precision
manufacturing systems,” Journal of Key Engineering Materials,
Vols. 364-366, pp. 873-878.
25. Hwang Yunn-Lin, 2008, “Analysis of mechanical vibrations and
forces using amalgamated
decoupling method in multibody mechanical systems,”
International Journal of
Communications in Numerical Methods in Engineering, Vol. 24, No.
11, pp. 1553-1566.
26. Hwang Yunn-Lin, Hwang Shen-Jenn, Huang Zi-Gui, Lin
Ming-Tzong, Mao Yen-Chien,
Wang Pei-Yu, 2010, “Computational analysis of multibody dynamic
systems using nonlinear
recursive formulation,” Journal of Key Engineering Materials,
Vols. 419-420, pp. 289-292.
27. Hwang Yunn-Lin, Hwang Shen-Jenn, 2010, “Solving for dynamic
problems in flexible
manufacturing systems,” Journal of Advanced Materials Research,
Vols. 156-157, pp. 1501-
1504.
28. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2011,
“Circular and noncircular
conjugate tooth profiles generated by a novel rack-cutter,”
Journal of Applied Mechanics and
Materials, Vols. 63-64, pp. 948-951.
29. Hwang Yunn-Lin and Hwang Shen-Jenn, 2011, “Dynamic analysis
and control of multibody
systems using nonlinear combination methods,” International
Journal for Numerical Methods
in Biomedical Engineering, Vol. 27, Issue 10, pp. 1583-1610.
30. Hwang Yunn-Lin, Gau Wei-Hsin, Lin Wen-Huang, Hwang
Shen-Jenn, Chen Chien-Hsin,
2012, “Using nonlinear recursive formulation for the kinematic
analysis of human
biomechanical systems,” Journal of Advanced Materials Research,
Vols. 482-484, pp. 938-941.
31. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2012, “Finite
element model updating of
micromachined torsion structures using experimental eigendata,”
Journal of Vibro-
Engineering, Vol. 14, Issue 3, pp. 994-1001.
32. Chen Chien-Hsin, Hwang Yunn-Lin, Hwang Shen-Jenn, 2013,
“Non-Newtonian Fluid Flow
and Heat Transfer in Microchannels,” Journal of Applied
Mechanics and Materials, Vols. 275-
277, pp. 462-465.
-
10
33. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2013,
“Dynamic Characteristics of New
Tooth Profiles Gear Generated By a Novel Rack-Cutter,” Journal
of Applied Mechanics and
Materials, Vols. 284-287, pp. 723-726.
34. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2013, “Dynamic
Characteristics and Finite
Element Model Updating of Micromachined Torsion Structures,”
Journal of Applied
Mechanics and Materials, Vols. 284-287, pp. 1831-1835.
35. Chen Chien-Hsin, Hwang Shen-Jenn, Hwang Yunn-Lin, 2013,
“Electroosmotic Flow and
Heat Transfer in Microchannels: A Closed Form Solution,” Journal
of Applied Mechanics
and Materials, Vol. 319, pp. 462-467.
36. Hwang Shen-Jenn, Li Shin-Tang, Hwang Yunn-Lin, Chen
Chien-Hsin, 2013, “Study on
Scroll Profile Design Using Involute of Elliptic for Scroll
Compressor,” Journal of Applied
Mechanics and Materials, Vol. 319, pp. 622-628.
37. Hwang Yunn-Lin, Chien-Hsin Chen, Hwang Shen-Jenn, Lin
Wen-Huang, Nguyen Xuan Mai,
2013, “The dynamic analysis of humanoid robot system,” Journal
of Applied Mechanics and
Materials, Vols. 373-375, pp. 242-245.
38. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2014,
“Optimization of Circular Diamond
Saw Blades with Annular Slots,” Journal of Applied Mechanics and
Materials, Vols. 479-480,
pp. 289-293.
39. Hwang Yunn-Lin, Cheng Jung-Kuang, 2014, “The Dynamic
Analysis and Simulation of
Electric Scooter,” Journal of Applied Mechanics and Materials,
Vols. 479-480, pp. 365-368.
40. Hwang Yunn-Lin, Cheng Jung-Kuang, 2014, “The dynamic
behavior and modal analysis of
electric scooter,” Journal of Vibro-Engineering, Vol. 16, Issue
2, pp. 689-696.
41. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2014, “Model
Updating and Structural
Optimization of Circular Saw Blades with Internal Slots,”
Journal of Advances in Mechanical
Engineering, Volume 2014, Article ID 546496. (SCI)
42. Hwang Yunn-Lin, Van-Thuan Truong, 2015, “DYNAMIC ANALYSIS
AND CONTROL OF
MULTI-BODY MANUFACTURING SYSTEMS BASED ON NEWTON-EULER
FORMULATION,” International Journal of Computational Methods,
March 2015, Vol. 12, No.
02, 18 pages.
43. Hwang Yunn-Lin, Cheng Jung-Kuang, Truong Van-Thuan, 2014,
“Computer-Aided Dynamic
Analysis and Simulation of Multibody Manufacturing Systems,”
Journal of Applied
Mechanics and Materials, Vols. 764-785, pp. 757-761.
44. Chen Kun-Nan, Ueng Wen-Der, Hwang Yunn-Lin, 2015, “A New
Procedure for Structural
Fault Estimation Using a Prescribed Eigen-structure,” Journal of
Applied Mechanics and
-
11
Materials, Vols. 764-765, pp. 1015-1019.
45. Hwang Yunn-Lin, Truong Van-Thuan, 2015, “A Synchronous
Approach for Numerical
Simulation of Machine Tools,” Key Engineering Materials, Vol.
642, pp. 317-322.
46. Chen Kun-Nan, Ueng Wen-Der, Hwang Yunn-Lin, 2015,
“Sequential eigen-assignment
technique for structural damage identification,” Journal of
Vibro-Engineering, Vol. 17, Issue 3,
pp. 1232-1241.
47. Hwang Yunn-Lin, Ta Thi-Na, Cheng Jung-Kuang, 2016, “The
Friction Effects for Contact
Force Analysis of Three Axes CNC Machine Tool,” Key Engineering
Materials, Vol. 739, pp.
12-17.
48. Hwang Yunn-Lin, Ta Thi-Na, Tran Cao-Sang, 2018, “The
Kinematic and Dynamic Analysis of
Hydraulic Control System Based on the Lagrangian Force Method,”
International Journal of
Computational Methods, January 2018, Vol. 15, No. 1, 18
pages.
http://dx.doi.org/10.1142/S021987621850041Xhttp://dx.doi.org/10.1142/S021987621850041X
-
12
Peer-reviewed Conference Papers
1. Hwang, Y. L., and Shabana, A. A., 1992, “Decoupling Joint and
Elastic Accelerations in
Flexible Multibody Vehicle Dynamics”, Proceedings of CSME
(Canadian Society of
Mechanical Engineer) FORUM 1992, Montreal, Canada, June 1-4,
1992.
2. Hwang, Yunn-Lin, 1993, “Dynamic Decoupling Methods Between
the Joint and Elastic
Coordinates in Flexible Mechanical Systems,” Proceedings of 10th
Chinese Mechanical
Engineering Conference, pp. 345-354, Taiwan.
3. Hwang, Yunn-Lin, 1993, “Decoupling Methods in Flexible
Multibody Dynamics”,
Proceedings of 1993 ASME International Computers in Engineering
Conference, San
Diego, California, USA, August 8-12, 1993, pp. 93-96,
Taiwan.
4. Hwang, Yunn-Lin, 1994, “Computer-aided design and manufacture
of rotor mechanism
utilizing the geometric differential formulation”, Proceedings
of National Science Council
of Taiwan, Hsin-Ju, Taiwan.
5. 黃運琳,2002,"撓性開迴路機械系統的動力分析", 中華民國力學學會第二十六屆
力學研討會論文摘要集, Paper No. L006. (NSC 87-2212-E-150-011)
6. Hwang Y. L., 2003, “Recursive Method for the Dynamic Analysis
of Open-Loop
Flexible Multibody Systems”, Proceedings of the Fourth Symposium
on Multibody
Dynamics and Vibration, ASME2003 Conference, Paper No. 48368,
Chicago, U.S.A.,
September 2-6, 2003. (NSC 90-2212-E-150-012)
7. 黃運琳,林育信,2004,"樑結構產品的振動模態特性驗證",中華民國 2004 精密機
械與製造技術研討會論文摘要集,Paper No. 9321. (NSC 92-2622-E-150-008-CC3)
8. Hwang Yunn-Lin, Gau Wei-Hsin, 2004, “DYNAMIC RECURSIVE METHOD
FOR
THE FLEXIBLE MULTIBODY SYSTEMS”, Proceedings of the second
Asian
Conference on Multibody Dynamics (ACMD 2004), Paper No. 100022,
pp. 104-111,
Olympic Parktel, Seoul, Korea, August 2-4, 2004. (NSC
90-2212-E-150-012)
9. 黃運琳,林育信,李俊漢,葉權寬,李景成,陳峻宏,2004,"封閉迴路撓性機構的
動力分析",中國機械工程學會第二十一屆全國學術研討會論文集 C.固力與設計
, Paper No. C0501094, pp. 2695-2700. (NSC
92-2622-E-150-008-CC3)
10. Yunn-Lin Hwang, 2005, “Nonlinear recursive formulation for
kinematic and dynamic
analysis of robotic manufacturing systems”, 2005 International
Conference on
Advanced Manufacture, Paper No. H002, Taipei, Taiwan. (NSC
90-2212-E-150-012)
11. Yunn-Lin Hwang, Shen-Jenn Huang, 2005, “Kinematic and
Dynamic Analysis for
Closed-Loop Flexible Manufacturing Systems Using Nonlinear
Recursive Method”,
2005 International Conference on Advanced Manufacture, Paper No.
P034, Taipei,
Taiwan. (NSC 94-2212-E-150-020)
12. S. J. Hwang, Y. L. Hwang, B. Y. Lee, 2005, “Using the
Taguchi-Grey approach to
optimize high speed end milling with multiple performance
characteristics”, 2005
-
13
International Conference on Advanced Manufacture, Paper No.
L021, Taipei, Taiwan.
13. 黃運琳,林育信,2005,"簡支樑結構產品的振動分析",2005 中華民國振動與噪音學
術研討會論文摘要集, Paper No. C8. (NSC 93-2815-C-150-012-E)
14. 黃運琳,葉權寬,李景成,林育信,2005,"食品加工機的振動與模態分析",2005 中
華民國振動與噪音學術研討會論文摘要集, Paper No. B11. (NSC 93-2622-E-150-005-
CC3)
15. 黃運琳,周旭陽,林哲瑋,邱朝慶,翁祖賢,黃文彬,陳彥伯,黃維秋,2005,"雙
固定端樑結構產品的振動模態分析",中國機械工程學會第二十二屆全國學術研討會
論文集 C.固力與設計-結構與振動, Paper No. C3-010. (NSC 93-2622-E-150-005-
CC3)
16. 黃運琳,周旭陽,林哲瑋,邱朝慶,翁祖賢,黃文彬,陳彥伯,黃維秋,2005,"食
品機械的動力分析與動態模擬",第八屆機構與機器設計學術研討會論文集,Paper
No. C06009, pp. 520-527. (NSC 93-2622-E-150-005-CC3)
17. 黃運琳,劉嘉進,邱朝慶,陳彥伯,黃文彬,黃維秋,2006,“電動代步車的電腦輔
助工程分析”, 第十四屆全國自動化科技研討會論文集,Paper No. K03. (NSC 94-
2622-E-150-003-CC3)
18. 劉嘉進,黃運琳,徐政裕,2006,“使用 CAD/CAE/CAM 加速射出成型模之開
發”,第十四屆全國自動化科技研討會論文集, Paper No. K04.
19. 黃運琳,陳志詳,邱朝慶,黃維秋,黃文彬,陳彥伯,2006,”電動代步車的動態應
力模擬與振動模態分析” ,第十四屆中華民國振動與噪音工程學術研討會論文集,
Paper No. C10_44, pp. C60-C69. (NSC 94-2622-E-150-003-CC3)
20. 黃運琳,王慧綺,吳柏毅,林乘鵬,柯忠志,陳冠廷,馮昶欽,劉嘉進,2006,”
懸臂平板結構產品的振動模態分析”,第十四屆中華民國振動與噪音工程學術研討會
論文集,Paper No. D8_54, pp. D52-D59. (NSC 94-2212-E-150-020)
21. Hwang Yunn-Lin, 2006, “Nonlinear recursive approach for the
dynamic analysis and
simulation of flexible automation mechanical systems”, Paper No.
0021a, pp. 359-366,
Proceedings of 2006 ISFA, 2006 International Symposium on
Flexible Automation,
Osaka, Japan, July 10-12, 2006. (NSC 94-2212-E-150-020)
22. 魏禎佑,黃運琳,邱朝慶,2006,”電動代步車的機構動態與結構模態分析”,第五
屆精密製造學術研討會論文集,Paper No. B3_000009, pp. 951-957. (NSC
94-2622-E-
150-003-CC3)「實務專題製作與成果競賽組第二名」。
23. 黃運琳,王慧綺,吳柏毅,林乘鵬,柯忠志,陳冠廷,馮昶欽,2006,"立式 CNC 工
具機之結構動態剛性分析",中國機械工程學會第二十三屆全國學術研討會論文集 C.
固力與設計,Paper No. C3-040. (NSC 95-2622-E-150-012-CC3)
24. 黃運琳,童景隆,2006,"晶片表面黏著載帶快速成型機的動力分析與動態模擬",中
國機械工程學會第二十三屆全國學術研討會論文集 C.固力與設計, Paper No.
C5-005. (NSC 95-2815-C-150-006-E)
-
14
25. 謝文祥,黃運琳,彭千誠,陳宗毅,2006,"仿生水母縮放推進機構之撓性運動模擬
",中國機械工程學會第二十三屆全國學術研討會論文集 C.固力與設計, Paper
No. C1-003. (NSC 93-2212-E-150-028)
26. 劉嘉進,黃運琳,楊湘琪,陳建安,張國達,2006,"搪桿細長比之研究",中國機械
工程學會第二十三屆全國學術研討會論文集 D.III,Paper No. D10-005.
27. Hwang Yunn-Lin, 2006, “DYNAMIC ANALYSIS METHOD FOR THE
FLEXIBLE
MULTIBODY SYSTEMS IN ENGINEERING EDUCATION”, Paper No. 91,
Proceedings of 2006 International Conference on Science &
Technology: Application in
Industry & Education, Pulau Pinang, Malaysia, December 8-10,
2006. (NSC 95-2221-E-
150-018)
28. Hwang Yunn-Lin, 2007, “Solid deformable multibody dynamic
problems in precision
manufacturing systems,” Paper No. 216TW, Proceedings of Asia
Pacific Conference on
Optics Manufacture 2007 (APCOM2007), Hong Kong, China, January
11-13, 2007.
(NSC 95-2221-E-150-018)
29. Hwang Yunn-Lin, Wei Zhen-You, 2007, “Analysis of mechanical
vibrations and forces
using amalgamated decoupling method in multibody automation
systems,” Paper No.
CAMD 15, Proceedings of the Ninth International Conference on
Automation
Technology (Automation2007), June 13-15, 2007, Taipei, Taiwan.
(NSC 95-2221-E-150-
018)
30. 魏禎佑,黃運琳,2007,"車載式探照燈受風壓之結構設計分析",2007ANSYS/Fluent
年度應用研討會論文集(2007/11/8-2007/11/9),Paper No. 10, 台北世貿中心。
31. 黃運琳,魏禎佑,2007,"撓性機械臂之逆向動力學分析與控制",中國機械工程學會
第二十四屆全國學術研討會論文集(2007/11/23-2007/11/24),Paper No. B10-0016,
桃園
中原大學。 (NSC 95-2221-E-150-018)
32. 黃運琳,林伯煒,柯耀涵,林立駿,魏書繁,2007,"懸臂板產品之振動量測與模態
分析 ",中國機械工程學會第二十四屆全國學術研討會論文集 (2007/11/23-
2007/11/24),Paper No. B11-0017, 桃園中原大學。 (NSC
95-2622-E-150-012-CC3)
33. 黃運琳,魏禎佑,2007,"疊代分析法運用於 3D 撓性機械臂之逆向動力學分析與控制
",第十屆全國機構與機器設計學術研討會論文集(2007/11/30),Paper No. I03, 台中中
興大學。
34. 黃運琳,林伯煒,柯耀涵,林立駿,魏書繁,2007,"拉伸試驗機台之振動量測與模
態分析",第十屆全國機構與機器設計學術研討會論文集(2007/11/30),Paper No. F06,
台中中興大學。
35. 黃運琳,魏禎佑,陳信樺,楊子羲,2007,"電動輪椅之動態應力量測與振動模態分
析",2007 年彰雲嘉大學校院聯盟論文集(2007/12/20),pp. 34-39,國立虎尾科技大
學。(NSC 94-2622-E-150-003-CC3)
36. 黃運琳,陳信樺,2007,"牽引機的排氣系統受外力激振響應之研究",中華民國力學
-
15
學會第三十一屆力學研討會論文集(2007/11/21-2007/11/22),Paper No. H15,義守大
學。 (NSC 95-2622-E-150-012-CC3)
37. 黃運琳,王士銘,康銘儀,張欽宇,劉昭雨,2008,"平面與空間結構的動態剛性分
析",中國機械工程學會第二十五屆全國學術研討會論文集(2008/11/21-2008/11/22),
Paper No. B10-06 (CSME25-330), 彰化大葉大學。 (NSC
96-2622-E-150-014-CC3)
38. 黃運琳,陳信樺, 楊子羲,2009,”轉子動態系統振動量測之信號處理分析”,第
十七屆中華民國振動與噪音工程學術研討會論文集(2009/6/6),Paper No. D-09, pp.
368-374,北台灣科學技術學院。 (NSC 95-2221-E-150-018)
39. 黃運琳,王威竣,楊政育,黃彥豪,范光儀,2009,”平板與箱型冷氣之動態剛性分
析”,第十七屆中華民國振動與噪音工程學術研討會論文集(2009/6/6),Paper No. D-
05, pp. 340-345,北台灣科學技術學院。(NSC 96-2622-E-150-014-CC3)
40. 吳松澤,王培郁,黃運琳,2009,"嬰兒安全座椅之結構強度動態衝擊分析",中華民
國 2009精密機械與製造科技研討會論文集(2009/5/23-2009/5/24), Paper No. G46,墾
丁福華大飯店。 (NSC 97-2622-E-150-005-CC3)
41. Hwang Yunn-Lin, Hwang Shen-Jenn, Huang Zi-Gui, Lin
Ming-Tzong, Mao Yen-Chien,
Wang Pei-Yu, 2009, “Computational analysis of multibody dynamic
systems using
nonlinear recursive formulation,” Paper No. NTU153, Proceedings
of 2nd International
Conference on Advanced Design & Manufacture (ADM2009),
Harbin, China,
September 24-26, 2009. (NSC 95-2221-E-150-018)
42. 黃運琳,廖志維,黃冠倫,江文楨,2009,"電動車輛之動態模擬與振動模態分析",
中華民國第十四屆車輛工程學術研討會論文集(2009/10/30),Paper No. A06,國立虎尾
科技大學。(NSC 96-2622-E-150-014-CC3)
43. 黃運琳,楊子羲,廖志維,劉昭雨,林泓伯,2009,"二足機器人的步態控制、模擬
與分析",中華民國力學學會第三十三屆力學研討會論文集(2009/11/13-2009/11/14),
Paper No. E1-144,苗栗國立聯合大學。(NSC 95-2221-E-150-018)
44. 黃運琳,陳信樺、黃冠倫、周志委,2009,"轉子動態系統振動之分析與研究",中國
機械工程學會第二十六屆全國學術研討會論文集(2009/11/20-2009/11/21),Paper No.
B10-006, 台南成功大學。 (NSC 96-2622-E-150-014-CC3)
45. Huang Zi-Gui, Hwang Yunn-Lin, Wang Pei-Yu, Mao Yen-Chieh,
2009, “TUNABLE
BAND GAPS OF ACOUSTIC WAVES IN TWO-DIMENSIONAL PHONONIC
CRYSTALS WITH RETICULAR BAND STRUCTURES”, Proceedings of
ASME
International Mechanical Engineering Congress & Exposition
(IMECE2009), Paper No.
13102, Lake Buena Vista, Florida, U.S.A., November 13-19, 2009.
(NSC 97-2218-E-150-
006)
46. 黃運琳,黃冠倫,周志委,2010,”運用雷射位移計量測及分析樑結構產品的動態特
性”,第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12),Paper No. C-
149,明志科技大學。(NSC 98-2221-E-150-046)
-
16
47. 黃運琳,宋正揚,張晉睿,陳宇青,湯佶勳,2010,”平板結構產品的動態特性分
析”,第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12),Paper No. I-
149,明志科技大學。(NSC 98-2622-E-150-080-CC3)
48. 黃運琳,王威竣,楊政育,黃彥豪,范光儀,2010,”箱型冷氣之動態剛性與噪音分
析”,第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12), Paper No.
I-143,明志科技大學。 (NSC 98-2815-C-150-009-E)
49. 黃運琳,王威竣,楊政育,黃彥豪,范光儀,2010,"平板之振動模態分析及箱型冷
氣機之動態剛性與噪音分析” , 第十八屆全國自動化科技研討會論文集(2010/6/25-
2010/6/26),Paper No. D01-0020, pp. 1018-1025,中原大學。 (NSC
98-2815-C-150-
009-E)
50. Hwang Yunn-Lin, Gau Wei-Hsin, 2010, “USING NONLINEAR
RECURSIVE
METHOD FOR THE DYNAMIC ANALYSIS OF OPEN-LOOP FLEXIBLE
MULTIBODY SYSTEMS”, Proceedings of the 5th Asian Conference on
Multibody
Dynamics (ACMD 2010), Paper No. 56670, Kyoto, Japan, August
22-26, 2010. (NSC 95-
2221-E-150-018 & NSC 98-2622-E-150-080-CC3)
51. Hwang Yunn-Lin, Hwang Shen-Jenn, 2010, “Solving for dynamic
problems in flexible
manufacturing systems”, Proceedings of the 2010 International
Conference on
Advances in Materials and Manufacturing Processes (ICAMMP2010),
Paper No. P640,
Shenzhen, China, November 6-8, 2010. (NSC 99-2221-E-150-003)
52. 黃運琳,劉昭雨,周志委,2010,"撓性機械臂之逆向動力學分析與控制",中華民國
力學學會第三十四屆力學研討會論文集(2010/11/19-2010/11/20),台灣雲林,Paper No.
E2009,國立雲林科技大學。 (NSC 95-2221-E-150-018)\
53. 黃運琳,林文煌,許育翰,林建廷,林文煥,張浚瑋,2010, "羽球練習機的機構設
計與運動分析",中華民國力學學會第三十四屆力學研討會論文集 (2010/11/19-
2010/11/20),台灣雲林,Paper No. J0034,國立雲林科技大學。(NSC
98-2622-E-150-
080-CC3)
54. 黃運琳,陳宇青,宋正揚,張晉睿,湯佶勳,2010,"等效懸臂樑結構的動態剛性分
析",中華民國第十五屆車輛工程學術研討會論文集(2010/11/26),Paper No. A-013,
台南私立南台科技大學。(NSC 92-2622-E-150-008-CC3)
55. 黃運琳,周志委,劉昭雨,2010,"農用機械車輛系統受外力激振響應之研究",中國
機械工程學會第二十七屆全國學術研討會論文集(2010/12/10-2010/12/11),Paper No.
BB0-016, B-動力與控制組論文集,pp. 803-808,國立台北科技大學。 (NSC 98-2622-
E-150-080-CC3)
56. Liu Zhao-Yu, Jou Chih-Wei, Chang Yu-Chang, Hwang Yunn-Lin,
2010, “Using
Recursive Formulation for Dynamic Analysis of Open-Loop
Deformable Multibody
Manufacturing Systems”, Proceedings of International Conference
on Manufacturing
and Engineering Systems (ICMES 2010), Paper No. 289, pp. 97-102,
Tainan, Taiwan,
-
17
R. O. C., December 16-18, 2010. (NSC 98-2221-E-150-046)
57. Li Shin-Tang, Hwang Shen-Jenn, Hwang Yunn-Lin, 2010,
“Parametric design of the
cross sections and rapid prototyping of scroll compressor”,
Proceedings of International
Conference on Manufacturing and Engineering Systems (ICMES
2010), Paper No. 284,
pp. 446-451, Tainan, Taiwan, R. O. C., December 16-18, 2010.
58. 黃運琳,范光儀,黃彥豪,莊世樺,2011,”平板結構之動態特性分析及驗證”,第
十九屆中華民國振動與噪音工程學術研討會論文集(2011/6/25),Paper No. B-06, pp.
73-80,大葉大學。 (NSC 98-2221-E-150-046)
59. 黃運琳,楊政育,張裕昌,2011,”工具機切削動態行為之研究與模擬”,第十九屆
中華民國振動與噪音工程學術研討會論文集(2011/6/25),Paper No. D-07, pp. 177-
183,大葉大學。(NSC 98-2622-E-150-080-CC3)
60. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2011,
“Circular and noncircular
conjugate tooth profiles generated by a novel rack-cutter,”
Proceedings of International
conference on Mechanical Engineering Industry and Manufacturing
Engineering 2011
(MEIME2011), Paper No. 363, Beijing, China, P. R. O. C., July
23-24, 2011.
61. Hwang Yunn-Lin, Gau Wei-Hsin, 2011, “The dynamic
characteristic analysis of the
constrained beams,” Proceedings of 7th International Symposium
on Precision
Engineering Measurement and Instrumentation (ISPEMI2011), Paper
T-QET-004,
Lijiang, Yunnan, China, P. R. O. C., August 7-11, 2011.
62. 黃運琳,劉昭雨,賴佩瑄,2011,”人體運動系統之動態控制模擬與研究”,2011 國
際生物力學研討會論文集(2011/10/20-2011/10/21),Paper No.
TSB2011-015,國立交通
大學。 (NSC 99-2622-E-150-003)
63. 黃運琳,周志委,宋正揚,2011,”以 NI 軟硬體模擬頻譜分析儀之研究”,第十四
屆全國機構與機器設計學術研討會論文集(2011/11/4),Paper No. E-014,國立中央大
學。 (NSC 99-2622-E-150-023-CC3)
64. 黃運琳,莊世樺,朱德日,2011,”挖土機的履帶系統的動力分析與研究”,中華民
國第十六屆車輛工程學術研討會論文集(2011/11/11),Paper No. A1-013,國立台北科
技大學。 (NSC 98-2221-E-150-046)
65. 黃運琳,黃苡婷,王彥昇,王偉帆,陳笛瑋,2011,”2D 與 3D 結構的振動與模態分
析”,中華民國第十六屆車輛工程學術研討會論文集(2011/11/11),Paper No. A1-
014,國立台北科技大學。 (NSC 98-2622-E-150-080-CC3)
66. 黃運琳,楊政育,張浚瑋,2011,”板材彎曲成形行為與參數設計的研究”,中華民
國力學學會第三十五屆全國力學會議論文集(2011/11/18-2011/11/19),Paper No. F1-
009,國立成功大學。(NSC 98-2622-E-150-080-CC3)
67. 黃運琳,范光儀,莊世樺,2011,"拓樸最佳化運用於工具機動態結構之分析與應用
",中國機械工程學會第二十八屆全國學術研討會論文集 (2011/12/10-2011/12/11),
Paper No. C08-006,國立中興大學。 (NSC 99-2622-E-150-023-CC3)
-
18
68. 黃運琳,黃彥豪,范光儀,楊政育,2011,"材料拉伸試片之應力應變分析模擬",中
國機械工程學會第二十八屆全國學術研討會論文集(2011/12/10-2011/12/11),Paper No.
C10-006,國立中興大學。 (NSC 98-2622-E-150-080-CC3)
69. Hwang Yunn-Lin, Gau Wei-Hsin, Lin Wen-Huang, Hwang
Shen-Jenn, Chen Chien-
Hsin, 2012, “Using nonlinear recursive formulation for the
kinematic analysis of human
biomechanical systems,” Proceedings of the International
Conference on Advances in
Materials and Manufacturing Processes (ICAMMP2012), Paper No.
V9540, Xiamen,
China, P. R. O. C., March 27-30, 2012. (NSC
99-2221-E-150-003)
70. 黃運琳,范光儀,賴佩瑄,2012,”基於硬軌接觸面參數的工具機動態結構特性分
析”,第二十屆中華民國振動與噪音工程學術研討會論文集(2012/6/16),Paper No. D-
06,大葉大學。(NSC 100-2622-E-150-026-CC3)
71. 黃運琳,楊政育,宋正揚,2012,”CAE 技術運用於風力發電機的動態分析研究”,
2012台灣風能學術研討會論文集(2012/12/19),Paper No. D-10,國立交通大學。(NSC
100-2622-E-150-026-CC3)
72. 賴佩瑄,黃運琳,范光儀,2012,”工具機結構動態特性分析與模擬”,中華民國力
學學會第三十六屆全國力學會議論文集(2012/11/16-2012/11/17),Paper No. Z-015,國
立中央大學。( NSC 100-2622-E-150-026-CC3)
73. Chen Chien-Hsin, Hwang Yunn-Lin, Hwang Shen-Jenn, 2012,
“Non-Newtonian Fluid
Flow and Heat Transfer in Microchannels,” Proceedings of the
International
Conference on Applied Mechanics and Materials (ICAMM2012), Paper
No. MM1640,
Sanya, China, P. R. O. C., November 24-25, 2012. (NSC
101-2221-E-150-025)
74. 黃運琳,張浚瑋,阮春梅,2012,"疊代法運用於工業機器人動力學的分析研究與實
驗",中國機械工程學會第二十九屆全國學術研討會論文集(2012/12/7-2012/12/8),
Paper No. 1954,國立中山大學。 (NSC 100-2221-E-150-006)
75. Chen Chien-Hsin, Shen-Jenn Hwang and Yunn-Lin Hwang, 2013,
“Electroosmotic Flow
and Heat Transfer in Microchannels: A Closed Form Solution,”
Proceedings of the 2013
2nd International Conference on Chemical, Mechanical and
Materials Engineering
(CMME 2013), Melbourne, Australia, January 20-21, 2013. (NSC
101-2221-E-150-025
and NSC 100-2221-E-150-075)
76. Hwang Yunn-Lin, Chen Chien-Hsin, Hwang Shen-Jenn, Lin
Wen-Huang, Mai Nguyen
Xuan, 2013, “The dynamic analysis of humanoid robot system,”
Proceedings of the
2013 International Conference on Mechatronics, Robotics and
Automation (ICMRA
2013), Paper No. RA4187, Guangzhou, China, P. R. O. C., June
13-14, 2013. (NSC 101-
2511-S-150-002)
77. 黃運琳,賴佩瑄,張浚瑋,張文順,2013,”虛擬工具機剛柔耦合結構之動態特性分
析”,第二十一屆中華民國振動與噪音工程學術研討會論文集(2013/6/29),Paper No.
D-0016,國立台北科技大學。(NSC 100-2622-E-150-026-CC3 & NSC
101-2622-E-150-
-
19
019-CC3)
78. 黃運琳,陳政平,蔡亞辰,黎育翔,蘇鴻林,2013,”1D 與 2D 結構之動態特性分析
及驗證”,第二十一屆中華民國振動與噪音工程學術研討會論文集(2013/6/29),Paper
No. D-0017,國立台北科技大學。(NSC 101-2622-E-150-019-CC3)
79. 黃運琳,宋正揚、柯竑志、林仁輝,2013,”流固耦合 CAE 分析應用於大型風力發
電機”, 2013 第一屆台灣磨潤科技研討會論文集(2013/10/6),Paper No. 50,劍湖山
世界(國立虎尾科技大學主辦)。(NSC 101-2622-E-150-019-CC3 & NSC
102-2218-E-
150-001)
80. Yunn-Lin Hwang, Van-Thuan Truong, Cheng-Yang Chen, Fang-Chun
Chou, Thanh-
Dat Pham, Thi-Na Ta, 2013, “Dynamic simulation and control of
machine tools,”
Proceedings of Automation 2013 The 12th International Conference
on Automation
Technology, Paper No. I004, Kun Shan University, Tainan, Taiwan,
R. O. C., November
1-2, 2013. (NSC 101-2622-E-150-019-CC3)
81. 黃運琳、賴冠霖、林文煌,2013,"人體多體動力學之分析與研究",中國機械工程學
會第三十屆全國學術研討會論文集(2013/12/6-2013/12/7),Paper No. 1763,國立宜蘭
大學。 (NSC 101-2511-S-150-002)
82. Chen Chien-Hsin, Hwang Yunn-Lin, 2014, “Viscous Heating
Effects in
Electrokinetically Driven Flow of Non-Newtonian Fluids Through a
Slit Microchannel,”
Proceedings of the 2014 International Conference on Mechanical
Design, Manufacture
and Automation Engineering (MDMAE2014), Paper No. M062, Phuket,
Thailand,
January 11-12, 2014. (NSC 101-2221-E-150-025 and NSC NSC
102-2221-E-150 -047)
83. 黃運琳,許憲銘,賴冠霖,陳笛瑋,柯竑志,2014,”小型 CNC 工具機的電腦輔助
工程分析”,第二十二屆中華民國振動與噪音工程學術研討會論文集 (2014/6/7),
Paper No. B1-6,國立彰化師範大學。(NSC 101-2622-E-150-019-CC3)
84. Yunn-Lin Hwang, Jung-Kuang Cheng, Van-Thuan Truong, 2014,
“Computer-Aided
Dynamic Analysis and Simulation of Multibody Manufacturing
Systems,” Proceedings
of 2014 International Conference on Engineering and Technology
Innovation
(ICETI2014), Paper No. Y-1035, Kenting, Taiwan, R. O. C.,
November 1-3, 2014. (NSC
100-2221-E-150-006 & NSC 101-2622-E-150-019-CC3)
85. Yunn-Lin Hwang, Van-Thuan Truong, 2014, “A Synchronous
Approach for Numerical
Simulation of Machine Tools,” Proceedings of International
Conference on Engineering
Tribology Technology 2014 (ICETT2014), Paper No. CETT-006,
Nantou, Taiwan, R. O.
C., November 21-23, 2014. (NSC 100-2221-E-150-006 & NSC
101-2622-E-150-019-CC3)
86. 劉宇軒、廖信豪、林柏銘、黃運琳,2014,”精密 CNC 鎢鋼帶鋸床之振動模態實驗
與分析”,中華民國力學學會第三十八屆全國力學會議論文集 (2014/11/21-
2014/11/22),Paper No. Z-015,國立臺灣海洋大學。( NSC
103-2622-E-150-006-CC3)
87. 黃運琳,謝氏娜,2014," Kinematic Analysis and Control of a Humanoid
Robot ",
-
20
中國機械工程學會第三十一屆全國學術研討會論文集(2014/12/6-2014/12/7),Paper No.
02876,逢甲大學。 (NSC 99-2221-E-150-003 & MOST
103-2622-E-150-006-CC3)
88. 林柏銘 、廖信豪 、劉宇軒 、黃運琳,2015,”高效 CNC 型鋼製程帶鋸床之電腦輔
助工程與結構振動分析”,第二十三屆中華民國振動與噪音工程學術研討會論文集
(2015/6/27),Paper No. A-4,明志科技大學。(MOST 103-2622-E-150-006-CC3,
MOST
104-2622-E-150-003)
89. Yunn-Lin Hwang, Cao-Sang Tran, Jeng-Haur Horng,2015,”Using
CAE Techniques
on The Hydraulic Control System of CNC Machine
Tools”,第二十三屆中華民國振動
與噪音工程學術研討會論文集(2015/6/27),Paper No. J-9,明志科技大學。(MOST
103-2622-E-150-006-CC3, MOST 104-2622-E-150-003)
90. Yunn-Lin Hwang, Chien-Hsin Chen, Thi-Na Ta, Kun-Nan Chen,
2015, “Using Zero
Moment Point Preview Control Formulation to Generate Nonlinear
Trajectories of
Walking Patterns on Humanoid Robots,” Proceedings of 12th
International Conference
on Fuzzy Systems and Knowledge Discovery (FSKD 2015), Paper No.
P1467,
Zhangjiajie, China, August 15-17 2015. (MOST
103-2622-E-150-006-CC3, MOST 104-
2622-E-150-003)
91. 黃運琳,林柏銘、賴湘焄、賴建甫、鄧文明、陳高創,2015,”高效 CNC 型鋼製程
帶鋸床之電腦輔助工程分析”, 2015 第二屆臺灣磨潤科技研討會暨海峽兩岸學術研
討會論文集(2015/10/31-2015/11/1),Paper No. CTTT069,雲林縣斗六市劍湖山世界
(國立虎尾科技大學主辦)。(MOST 104-2221-E-150-062)
92. Yunn-Lin Hwang, Thi-Na Ta, Siang-Syun Lai,2015,”Numerical
and Experimental
Dynamic Analysis of Machine Tool Spindle Systems”, 2015 1st
Spintech Technology
Thesis Award (2015/11/27),高速主軸創新應用實作類別優等獎,屏東縣墾丁福華渡假
飯店。(MOST 104-2221-E-150-062)
93. 黃運琳、賴建甫、鄭敬駱、劉羿伶、彭介慈,2015,"多體機械系統動力學分析以工
具機為例",中國機械工程學會第三十二屆全國學術研討會論文集 (2015/12/11-
2015/12/12),國立高雄應用科技大學,高雄市蓮潭會館。 (MOST 103-2622-E-150-
006-CC3)
94. Yunn-Lin Hwang, Thi-Na Ta, Siang-Syun Lai, Wei-Sin
Lin,2016,”Numerical and
Experimental Modal Analysis of Machine Tool Spindle
System”,第二十四屆中華民
國振動與噪音工程學術研討會論文集(2016/6/25),正修科技大學。(MOST 104-2622-E-
150-009-CC3, MOST 105-2622-8-150-001-TE3)
95. 黃運琳、謝氏娜、賴湘焄、林韋昕,2016,”高速主軸之動態特性分析與實驗”,
2016 2nd Spintech Technology Thesis Award
(2016/10/1),高速主軸創新應用實作類別
優等獎,屏東縣墾丁福華渡假飯店。(MOST 104-2622-E-150-009-CC3)
96. Yunn-Lin Hwang, Thi-Na Ta, Jung-Kuang Cheng, 2016, “The
Friction Effects for
Contact Force Analysis of Three Axes CNC Machine Tool,”
Proceedings of
-
21
International Conference on Engineering Tribology and Applied
Technology 2016
(ICETAT2016), Paper No. CETATS 086, Taipei, Taiwan, R. O. C.,
November 4-6, 2016.
(MOST 104-2622-E-150-009-CC3)
97. Thi-Na Ta, Yunn-Lin Hwang,2016,”Gait Analysis and Simulation
of Biomimetic
Humanoid Robot”,中華民國力學學會第四十屆全國力學會議論文集(2016/11/25-
2016/11/26),Paper No. Z-1028,國立交通大學。( MOST
104-2221-E-150-062)
98. 黃運琳、林韋昕、謝氏娜、賴湘焄,2016," CNC工具機高速主軸之動態特性分析與
實驗",中國機械工程學會第三十三屆全國學術研討會論文集(2016/12/3-2016/12/4),
工業技術研究院,新竹市。 (MOST 105-2622-8-150-001-TE3, MOST
104-2622-E-150-
009-CC3)
99. 黃運琳、林韋昕、賴湘焄、鍾宇翔、莊凱翔,2017,”自動倉儲架的電腦輔助工程分
析與模態測試”,第二十五屆中華民國振動與噪音工程學術研討會論文集(2017/6/3),
長庚大學。(MOST 104-2622-E-150-062, MOST 105-2622-8-150-001-TE3)
100. 黃運琳、彭介慈、劉羿伶、鍾宇翔、莊凱翔、林家弘,2017,”CNC 工具機的電腦
輔助設計與動態模擬分析”,第二十五屆中華民國振動與噪音工程學術研討會論文集
(2017/6/3),長庚大學。(MOST 104-2622-E-150-009-CC3, MOST
105-2622-8-150-001-
TE3)
101. Yunn-Lin Hwang, Thi-Na Ta, Van-Thuan Truong,2017,”Numerical
Control of
Multi-Body Dynamic Systems Based on Recursive Method”,
2017第三屆臺灣磨潤
科技研討會論文集(2017/10/6-2017/10/7),Paper No. CTTT001,崑山科技大學,台南
市。(MOST-105-2622-E-150-007-CC3)
102. Yunn-Lin Hwang, Thi-Na Ta, 2017, “The Stick-Slip Friction
Effect on Motion Accuracy
of Multibody Systems - CNC Machine Tools,” Proceedings of The
1st Japan-Taiwan
International Tribology Symposium 2017 (JTTS2017), Kagoshima,
Japan, from
October 13-16, 2017. (MOST 106-2622-E-150-007-CC3 and MOST
106-2622-8-150-001-
TE3)
103. 黃運琳、林家弘、鍾宇翔、莊凱翔、吳昱緯,2017,”人體多體系統的動態分析與模
擬”,中華民國第二十屆全國機構與機器設計學術研討會論文集 (2017/11/17-
2017/11/18),Paper No. 62,國立彰化師範大學。(MOST
106-2622-E-150-007-CC3,
MOST 106-2622-8-150-001-TE3)
104. 黃運琳、莊凱翔、吳昱緯、林家弘、鍾宇翔,2017,”應用多體動力學軟體於倒單擺
機械系統的控制與分析”,中華民國力學學會第四十一屆全國力學會議論文集
(2017/11/24-2017/11/25),Paper No. 1145,國立成功大學。(MOST
106-2622-E-150-
007-CC3, MOST 106-2622-8-150-001-TE3)
105. 黃運琳、鍾宇翔、莊凱翔、吳昱緯、林家弘,2017,”汽車懸吊系統的耐久度分析與
研究”,中華民國第二十二屆車輛工程學術研討會會議論文集(2017/11/24),Paper No.
F102,國立台北科技大學,台北市。(MOST 106-2622-E-150-007-CC3, MOST 106-
-
22
2622-8-150-001-TE3)
106. 黃運琳、吳昱緯、林家弘、鍾宇翔、莊凱翔,2017," 多功能氣動砂磨機之電腦輔助
工程分析",中國機械工程學會第三十四屆全國學術研討會論文集 (2017/12/1-
2017/12/2),國立勤益科技大學,台中市。 (MOST 106-2622-E-150-007-CC3, MOST
106-2622-8-150-001-TE3)
107. 黃運琳、吳昱緯、鍾宇翔、林家弘,2018,”多功能氣動砂磨機之轉子平衡塊設計與
振動分析研究”,第二十六屆中華民國振動與噪音工程學術研討會論文集
(2018/6/30),國立清華大學,新竹市。 (MOST 106-2622-E-150-007-CC3, CTSP-
105AG04, MOST 106-2622-8-150-001-TE3)
108. Yunn-Lin Hwang, Thi-Na Ta, 2018, “The influence of the
friction force on the sliding
stability of controlled multibody systems - CNC machine tool,”
Proceedings of The 6th
Asia International Conference on Tribology (ASIATRIB2018), Paper
No. 316, Kuching,
Sarawak Malaysia, from September 17-20, 2018. (MOST
106-2622-E-150-007-CC3 and
MOST 106-2622-8-150-001-TE3)
109. Yunn-Lin Hwang, 2018, “The Dynamic Analysis and Control of
Hydraulic Machine
System and Industrial Robotic Manipulators,” Proceedings of
International Conference
of Fluid Machinery and Automation Systems (ICFMAS2018), Paper
No. 1, Hanoi, Viet
Nam, October 27-28, 2018. (MOST 104-2622-E-150-062 and MOST
105-2622-E-150-
007-CC3)
110. Yunn-Lin Hwang, Thi-Na Ta, Jung-Kuang Cheng, 2018,
“Uncertainty Analysis of CNC
Machine Tools Based on Monte Carlo Method,” Proceedings of
International
Conference on Engineering Tribology and Applied Technology 2018
(ICETAT2018),
Paper No. CETAT-A027, Taipei, Taiwan, R. O. C., November 16-18,
2018. (MOST 107-
2221-E-150-011, MOST 107-2622-8-150-001-TE3)
111. Van-Thuan Truong, Yunn-Lin Hwang, Jung-Kuang Cheng, 2018,
“Dynamics Analysis
and Numerical Simulation of Large-scale Hydraulic Cylinder
Actuator,” Proceedings of
International Conference on Engineering Tribology and Applied
Technology 2018
(ICETAT2018), Paper No. CETAT-A108, Taipei, Taiwan, R. O. C.,
November 16-18,
2018. (MOST 107-2221-E-150-011, MOST 107-2622-8-150-001-TE3)
112. 黃運琳、陳靖廷、鍾宇翔、劉素莉,2019,”立式加工中心機的電腦輔助模態分析與
實驗模態分析”,台灣機電工程國際學會第四屆全國學術研討會論文集(2019/2/15-
2019/2/16),國立高科技大學,高雄市。(MOST 107-2622-E-150-006-CC3, CTSP-
105AG04,MOST 107-2622-8-150-001-TE3)
113. Sook-ruadee Lawaroon, Yunn-Lin Hwang, 2019, ”Dynamic
analysis of vibration
and durability on multibody landing gear systems” , The 10th
Asian-Pacific
Conference on Aerospace Technology and Science & The 4th
Asian Joint Symposium on
Aerospace Engineering Venue:第十屆亞洲航太工程研討會論文集 (2019/8/28-
-
23
2019/8/31),Paper No. 2019-19-001,國立交通大學,新竹市。
114. Yunn-Lin Hwang, Thi-Na Ta, Jeng-Haur
Horng,2019,”Experimental Investigation
of Friction-Vibration Correlation”, 2019 第四屆臺灣磨潤科技研討會論文集
(2019/10/25-2019/10/26),Paper No.
CTTT044,國立成功大學,台南市。(MOST-107-
2622-E-150-011)
115. 陳靖廷、黃運琳,2019,”運用 RecurDyn 軟體進行鋼纜動力學分析”,中華民國第
二十二屆全國機構與機器設計學術研討會論文集(2019/11/22-2019/11/23),Paper No.
12,國立中正大學。(MOST 107-2622-E-150-006-CC3)
116. Sook-ruadee Lawaroon, Yunn-Lin Hwang, Kuo-Chiang
Shang,2019,” The virtual
model analysis of multibody systems”,中華民國力學學會第四十三屆全國力學會議
論文集(2019/11/29-2019/11/30),Paper No. 10001,逢甲大學。( MOST
107-2622-E-
150-006-CC3)