CV- Mohamed Lamjed Bouazizi –Aug, 2018 1/13 CURRICULUM VITAE Professor Mohamed Lamjed Youssef BOUAZIZI °°°° Mechanical Department, College of Engineering, Prince Sattam Bin Abdulaziz University, Kingdom Saudi Arabia-KSA & Director of the Research Unit: Structural Dynamics, Modeling and Engineering of Multi-Physics Systems, Preparatory Engineering Institute of Nabeul , Tunisia Date and place of birth 08 September 1966, Tunisia Address: Prince Sattam Bin Abdul-Aziz University, College of Engineering at Alkharj, P. O. Box 655, Alkharj 11942 – Kingdom of Saudi Arabia (KSA). Marital Status Married, 2 childrens Phone numbers (+966 500821370 in KSA), (+216 52 010 472 or +216 98 913 472 in Tunisia) E-mails: [email protected]or [email protected]Web: http:sites.google.com/site/lamjedbouazizi Languages English, French and Arabic Academic Qualifications 2009 Academic Habilitation Degree, HDR Mechanical Engineering-Design, Carthage University, Tunisia. 2002 Ph.D. in Structural Dynamics, Joint supervision between The Applied Mechanics Laboratory - Franche Comte University, France and the Faculty of Sciences of Tunis (FST) Tunis El Manar University 1995 Master Science degree in the Materials of Applied Mechanics, Tunis El Manar University, Tunisia. 1992 Bachelor Science degree in Mechanical Design, Tunis University , Tunisia. 1987 High School degree in Techniques at the high school of SBZ, Tunisia. Positions held - Professor in Mechanical Engineering at the College of Engineering, Mechanical engineering Department El Kharj- Prince Sattam Bin Abdulaziz University, Al Kharj, KSA. - Professor in Mechanical Engineering at the Preparatory Engineering Institute of Nabeul, Tunisia- June 2017. -Associate Professor in Mechanical Engineering at Prince Sattam Bin Abdulaziz University, Kingdom Saudi Arabia- September 2014. - Associate Professor in the University of Carthage, Tunisia in the period 2010 and 2014. - Coordinator of the College of Engineering of the learning outcomes at Prince Sattam Bin Abdulaziz University, KSA-September 2016. - Member of the seminars and conferences committee in the mechanical department since 2016. -Member of the committee of summer training for students at the University of California Irvine, USA, 2014-2015. - Member of the Alumni- committee for Engineers at the University of Prince Sattam Bin Abdulaziz, KSA, 2014-2016. - Member of the Exam-committee for Students at the University of Prince Sattam Bin Abdulaziz, KSA, 2015-2017. keywords and expertise Methods of model reduction / Sub-structuring / Passive damping viscoelastic/ Provskite Multi-objective optimization / Robust design/ Pumping Energy/Harvesting Energy/ Materials .
13
Embed
CURRICULUM VITAE Professor Mohamed Lamjed Youssef …€¦ · CURRICULUM VITAE Professor Mohamed Lamjed Youssef BOUAZIZI °°°° Mechanical Department, College of Engineering, Prince
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CV- Mohamed Lamjed Bouazizi –Aug, 2018 1/13
CURRICULUM VITAE
Professor Mohamed Lamjed Youssef BOUAZIZI
°°°°
Mechanical Department, College of Engineering, Prince Sattam Bin Abdulaziz University, Kingdom Saudi Arabia-KSA & Director of the Research Unit: Structural Dynamics, Modeling and Engineering of Multi-Physics Systems, Preparatory
Engineering Institute of Nabeul , Tunisia
Date and place of birth
08 September 1966, Tunisia
Address: Prince Sattam Bin Abdul-Aziz University, College of Engineering at Alkharj,
P. O. Box 655, Alkharj 11942 – Kingdom of Saudi Arabia (KSA).
Marital Status Married, 2 childrens
Phone numbers
(+966 500821370 in KSA), (+216 52 010 472 or +216 98 913 472 in Tunisia)
2002 Ph.D. in Structural Dynamics, Joint supervision between The Applied Mechanics Laboratory - Franche Comte University, France and the Faculty of Sciences of Tunis (FST) Tunis El Manar University
1995 Master Science degree in the Materials of Applied Mechanics, Tunis El Manar University, Tunisia.
1992 Bachelor Science degree in Mechanical Design, Tunis University , Tunisia.
1987 High School degree in Techniques at the high school of SBZ, Tunisia.
Positions held - Professor in Mechanical Engineering at the College of Engineering, Mechanical engineering Department El Kharj- Prince Sattam Bin Abdulaziz University, Al Kharj, KSA. - Professor in Mechanical Engineering at the Preparatory Engineering Institute of Nabeul, Tunisia- June 2017. -Associate Professor in Mechanical Engineering at Prince Sattam Bin Abdulaziz University, Kingdom Saudi Arabia- September 2014. - Associate Professor in the University of Carthage, Tunisia in the period 2010 and 2014. - Coordinator of the College of Engineering of the learning outcomes at Prince Sattam Bin Abdulaziz University, KSA-September 2016. - Member of the seminars and conferences committee in the mechanical department since 2016. -Member of the committee of summer training for students at the University of California Irvine, USA, 2014-2015. - Member of the Alumni- committee for Engineers at the University of Prince Sattam Bin Abdulaziz, KSA, 2014-2016. - Member of the Exam-committee for Students at the University of Prince Sattam Bin Abdulaziz, KSA, 2015-2017. - Director of Research Unit at the Preparatory Engineering Institute of Nabeul, Tunisia -Coordinator of the framework for scientific cooperation agreement between the university of Carthage (Tunisia) and the University of Franche-Comté (France), Jun 2012. -Coordinator of the framework for scientific cooperation agreement between the university of Tunis El Manar (Tunisia) and the University of Franche-Comté (France), Jun 2013.
keywords and expertise
Methods of model reduction / Sub-structuring / Passive damping viscoelastic/ Provskite
Professor in Mechanical Engineering at the Colleague of Engineering – Mechanical Department El Kharj- Salman Bin Abdulaziz University, Riyadh, KSA.
2014-2017
Associate Professor in Mechanical Engineering at the Colleague of Engineering – Mechanical Department El Kharj- Salman Bin Abdulaziz University, Riyadh, KSA .
2011-2014
Associate Professor in Mechanical Engineering at the Preparatory Institute for Engineering Studies of Nabeul, Carthage University, Tunisia.
2005-2011 Assistant Professor in Mechanical Engineering at the Preparatory Institute for Engineering Studies of Nabeul, Carthage University, Tunisia.
2001-2005 Lecturer in Mechanical Engineering at the Preparatory Institute for Engineering Studies of Nabeul, Carthage University, Tunisia.
1998-2001 Secondary school teacher detached to the Higher Education at the Preparatory Institute for Engineering Studies of Nabeul, Carthage University, Tunisia.
1998-2001 Contract teacher at Institute of Applied Sciences and Technology of Gafsa, Tunisia.
1993-1998 Teacher of secondary school detached at the high school of Sidi Bouzid.
Projects and Taught courses in College Engineering, Salman Bin Abdulaziz University, KSA
College of Engineering- Mechanical Department (MD) Duration: Since September 2014- jun 2016 - Levels: Five, Six and Ten
Project 1: Study and Design of a delivery drone, January 2018
Project 2: Study and Design of a solar tower with chimney effect for the production of
electricity, Mai 2016
Project 3: Study and Design of a feeding System in the folding machine, Mai 2014
Thematic 1: Mechanical Engineering: Design ,Course Topics: - Introduction to Mechanical Design, Load and stress analysis, Deflection and stiffness, Failure resulting from static loading fatigue failure resulting from variable loading, Shaft design screws, fasteners and design of non permanent joints, Rolling contact bearings, Design of gears, Clutches and brakes. Thematic 2: Mechanics of Machinery ,Course Topics: - Introduction Graphical position, velocity and acceleration analysis of mechanisms- Analytical linkage analysis- Profile cam design- Gear trains- Static force analysis- Dynamic force analysis- Flywheels.
Thematic 3: Dynamics ,Course Topics: - 1) Kinematics of Particles: Rectilinear Motion, Plane Curvilinear Motion, x-y coordinates, n-t coordinates, Polar coordinates, Relative Motion, Constrained Motion. 2)Kinetics of Particles: Newton’s Second Law, Curvilinear Motion, Work and Energy Method, Impulse and Momentum. 3) Kinematics of Rigid Bodies: Rotation, Relative Velocity, Relative Acceleration, Motion Relative to Rotating Axes. 4) Kinetics of Rigid Bodies: Equation of Motion, Translation, Rotation, General Plane Motion.
Thematic4: Mechanics of Machinery Laboratory ,Experiments: - Apparatus for investigating inertia in rotational motion, Four bar chain, Worm and wheel apparatus, Crank and connecting rod apparatus and Cam analysis apparatus.
Thematic5: Mechanical Engineering Drawing and Graphics Laboratory ,Experiments: - Solids modeling with solidworks, Sketching and dimensioning , Creating an assembly parts, Multi-sheet drawing, CAD CAM Laboratory.
CV- Mohamed Lamjed Bouazizi –Aug, 2018 3/13
Taught courses in Engineering Mechanical Schools
National Engineering School of Tunis (ENIT) Duration: Since January 2010- June2012 - Level: Master mechanical engineering
Thematic 1: Robust Design of Mechanics. Course Topics: - Condensed models by: Guyan method, Model condensation, Modal synthesis methods and the Concept of equivalent linearization – Parametric optimization: Introduction to optimization, objective function, deterministic optimization method, stochastic optimization method and multiobjective optimization. Thematic 2: Dynamic Analysis of Mdof Systems- Analytical Solutions in time domain. Course Topics: Linearized eigenvalue problem - Solution of the undamped free vibration problem - Undamped free vibration using mode superposition - Damped free vibration using mode superposition method. Thematic 3: Dynamic Analysis of Sdof and Mdof Systems- Numerical Solutions in time domain. Course Topics: Linearized of the excitation - Direct numerical integration - Explicit direct integration- Implicit direct integration.
Taught courses in Institute of Applied Sciences and Technology
National Institute of Applied Sciences and Technology of Tunis(INSAT) Duration: Since September 2011- June2012 - Level: Master mechanical engineering
Taught courses in Institute of Education and Training
Higher Institute of Education and Training of Tunis (ISEFC) Duration: Since January 2006- June2011 - Level: Mastery mechanical engineering
Thematic: Mechanical Vibration. Course Topics: - General concept: introduction,
characterization of the action (deterministic or random loading), different cases encountered in
vibration. – Linear mechanical system with one degree of freedom: Equation of motion of the
elementary oscillator, Free and Forced vibration of the elementary oscillator, vibration of beam
and non linear vibration.
Taught courses in Preparatory Institute for Engineering studies
Preparatory Institute for Engineering Studies of Nabeul (IPEIN) 1- Duration: Since January 2008- June2014
Level: Second year preparatory class, Section: Technology
Thematic: Mechanics of Materials Course Topics: - Introduction to mechanics of materials and static review- Internal loads and types of loading- Types of supports and Reactions- Basic definitions of static review – condition of equilibrium. -Tension - Compression and Shear: Average normal stress- Normal strain – Allowable stress –Condition of resistance- Stress concentration-Mechanical properties- Stress strain diagram- Modulus of Elasticity- Hooks law –
Poisson s ratio- Generalized Hooks law.- Shear: Single shear – Double Shear – Axially Loaded members: Saint venant principle- multi segment bar- thermal strain-Statically indeterminate members loaded axially. Torsion: Torsional deformation of a circular bar- Torsion of a circular sections- shear strain/stress –Polar moment of Inertia- : multiple torque and cross-section areas –stress concentration. Thin walled pressure vessels: Introduction- Cylindrical pressure vessels- Spherical pressure
vessels –applications. Pure Bending: Introduction- Note about second moment of area- Note
about parallel axis theorem -combined loadings- applications. Shear and Bending moment
diagram: Introduction-type of beams- type of loads- stress strain transformation- general
equations of plane stress- Maximum in plane shear.
CV- Mohamed Lamjed Bouazizi –Aug, 2018 4/13
2- Duration: Since January 2005- June2008
Level: First year preparatory class, Section: Technology
Thematic 1: Basics of engineering drawing. Course Topics: Orthogonal projection: - Introduction- Forms of orthographic projection- First angle projection- Third angle projection-Normalized formats- main lines- Orthogonal projection- system; of orthogonal projections- drawing of definition- cut and sections- the intersection- cotation- the tolerance and the adjustments - General properties and designation of materials- mechanical properties- mechanical characteristics of materials, metallurgical properties, schematic of metallurgical diagram. Thematic 2: Introduction to engineering design. Course Topics: Elements of mechanical engineering: - Introduction- pins-nuts- screws-pads- dowel- bearings- joints- washers-Examples. The mechanical connections-movement- hypotheses- the mechanical links- normalized representation graph of links- kinematic diagram. Guiding in rotation -movement- functions- constructive solutions- direct contact-bushings of friction- bearings- mounting bearings- Applications. Level: Second year preparatory class, Section: Mathematics and Physics
Thematic 3: General Mechanics. Course Topics: Introduction - Vector calculus- the torsors- mechanical systems- Kinematics of solid systems- modeling of mechanical actions- Fundamental principle of statics- kinematics- velocity-acceleration- classification of motion- geometry of the masses- kinetic- System Dynamics- Energetic mechanical systems.
Taught Courses at
Institute of Applied
Sciences and
Technology of Gafsa-
Tunisia
3- Duration: Since September 1995- June1998
Level: Second year class, Section: Technology
Thematic. Strength of Materials. Course Topics: Beam tests- Determination of support reactions in a simply supported beam- Variation of deflection of a simply supported beam with load- Beam thickness and material- experimental verification of the simple bending theory- Deflexion of a cantilever beam- statically indeterminate beam- Flexure tests: Determination of Young’s modulus for several materials and dimensions- Torsion tests: Determination of the Coulomb modulus.
Taught Courses at high school of Sidi Bouzid
4- Duration: Since September 1993- June1998
Level: Terminal of secondary class, Section: Technology
Mechanical manufacturing practice and Mechanical design.
Educational and Supervision Projects for master level at ISEFC of Tunis (10)
1- Theoretical study of a wear test rig, at ISEFC Institute of Tunis. 2- Study and design of a feeding system in the folding machine, at ISEFC Institute of Tunis. 3- Study and design of a central heating, at ISEFC Institute of Tunis with Tunisian Agency for Vocational Training. 4 - Design and construction of a solar chimney effect for the production of electricity, at ISEFC Institute of Tunis with Centre for Research Technology and Energy Tunisia. 5-Analytical study and practice of collective the production hot water by solar installation at ISEFC Institute of Tunis with Centre for Research Technology and Energy Tunisia. 6-Universal system of Wear, Defended July 2013 at ISEFC Institute of Tunis. 7-Endurance machine of Gears, defended July 2012 at ISEFC Institute of Tunis. 8-Design and Realization of a polishing machine, defended July 2012 at ISEFC Institute of
Tunis.9-Design project of a metrology laboratory for a higher education Institution, defended
Jun 2010 at ISEFC Institute of Tunis.10-Design of a hydraulic press, defended Jun 2009 at
ISEFC Institute of Tunis.
CV- Mohamed Lamjed Bouazizi –Aug, 2018 5/13
Collective responsibilities and Other activities
Participation in educational training courses as part of the implementation of quality and preparation system for accreditation of engineering schools (ABET - Accreditation Board for Engineering and Technology): Jan 2015 and Sep 2014.
Director of Research Unit “Structural Dynamics, Modeling and Systems Engineering Multi-Physics” since September 2012;
Reviewer of the examination committee for Habilitation: (01) habilitation was defended at the National Engineering School Tunis (ENIT-June 2012), (01) Habilitation was defended at the National Engineering School Sfax (ENIS-February 2013) and (01) habilitation defended at INSAT of Tunis (June 2013) .
Reviewer of the examination committee for Ph. D. Thesis: (02) Ph. D. Thesis were defended at the National Engineering School Tunis (ENIT- 2012m2013, (03) Ph. D. Thesis were defended at the National Engineering School of Sfax (ENIS-2012 and 2013) and (01) Ph. D. Thesis was defended at the National Engineering School of Monastir- Tunisia.
Member of the examination committee for Graduation Projects defense at ISEFC, Tunisia since 2006.
Member of the ATAVI Association since 2013.
Member of the Tunisian Mechanical Association since 2008.
Member of the Research Unit: Structural Dynamics, Modeling and Systems Engineering Multi-Physics since October 2011.
Member of the Sector National Committee in Applied Sciences and Technology since March2012.
Chapters in books (05): Last 4 years (2011-2016)
Chapter 01: Parameter identifacation of a sandwich beam using numerical-based
« Reduced-order model for non-linear dynamic analysis of viscoelastic sandwich
structures in time domain » Shock & Vibration, Aircraft/Aerospace, and Energy
Harvesting, pp : 39-45 ,Volume : 9, 2015
18. S. GHANMI, M. GUEDRI, M-L. BOUAZIZI, N.BOUHADDI, Robust multi-objective
and multi-level optimization of complex mechanical structures , Mechanical Systems
and Signal Processing, Volume 25, Issue 7, October 2011, Pages 2444-2461.
19. S. GHANMI, M. GUEDRI, M-L. BOUAZIZI, N.BOUHADDI, Optimisation robuste multi-
niveaux et multi-objectif de structures mécaniques complexes, Mécanique & Industries
11, 393–400 (2010).
20. M.-L. BOUAZIZI, S. GHANMI, R. NASRI, N. BOUHADDI, Robust
optimization of the non-linear behaviour of a vibrating system. European Journal
of Mechanics - A/Solids, Volume 28, Issue 1, pp. 141-154, january- february 2009.
21. M.-L. BOUAZIZI, R. MAJED, M. GUEDRI, N. BOUHADDI, Prediction
condensed models adapted to the nonlinear structures in time domain. Journal of
Sound and Vibration, Volume 320, Issue 3, pp. 668-690, 20 February 2009.
22. M.-L. BOUAZIZI, S. GHANMI, N. BOUHADDI, Multi-objective optimisation in
dynamics of the structures with nonlinear behaviour: Contribution of the metamodels.
Finite Elements in Analysis and Design, Volume 45, Issue 10, August 2009, pp: 612-
623(2009).
23. M.- L. BOUAZIZI, Samir GHANMI, Rachid NASRI, Noureddine BOUHADDI
« Robust optimization of the non-linear behaviour of a vibrating system » European Journal of Mechanics - A/Solids, Vol. 28, Issue 1, pp:141-154, 2009.
24. Samir GHANMI, Mohamed GUEDRI, M.-L. BOUAZIZI, Noureddine BOUHADDI « Use of Metamodels in The Multi-Objective Optimization of Mechanical Structures with Uncertainties» Interna Journal for Computational Methods in Engineering Science Meca,Vol. 8, pp. 283-302, 2007.
25. S. GHANMI, M. -L. BOUAZIZI, N. BOUHADDI « Robustness of mechanical systems against
uncertainties » Finite Elements in Analysis and Design, Vol. 43, pp.715,200.
26. M.- L. BOUAZIZI, Rachid NASRI, Youssef ABDELLI « Parametric and optimization study of a vibration absorber with a generalized cubic, quadratic and non integer nonlinearities of damping and stiffness » International Review of Mechanical Engineering” (I.RE.M.E.), Vol. 540, n. 226 (February 2007).
27. M.- L. BOUAZIZI, Mohamed GUEDRI, Noureddine BOUHADDI « Robust component modal synthesis method adapted to the survey of the dynamic behaviour of structures with localized non-linearities » Mechanical Systems and Signal Processing, Vol. 20, 131-157, 2006.
CV- Mohamed Lamjed Bouazizi –Aug, 2018 9/13
National and International Conferences :
1-Issam ABED, Najib KACEM, Mohamed Lamjed BOUAZIZI, Noureddine BOUHADDI, « Optimized nonlinear MDOF vibration energy havester based on eletromagnetic coupling », 7th International Conference on Design and Modeling of Mechanical Systems (CMSM’2017), pp.119-126, 27-29 Mars, 2017, Hammamet, Tunisia. 2- Ramzi AJILI, Olivier BAREILLE, Mohamed Lamjed BOUAZIZI, Mohamed Najib
ICHCHOU, Noureddine BOUHADDI, « Inhomogeneous wave correlation for propagation
parameters identification in presence of uncertainties », 7th International Conference on Design
and Modeling of Mechanical Systems (CMSM’2017), pp.27-31, 27-29 Mars, 2017, Hammamet,
Tunisia.
3- Ramzi AJILI, Olivier BAREILLE, Mohamed Lamjed BOUAZIZI, Mohamed Najib ICHCHOU, Noureddine BOUHADDI, « Parameter identifacation of a sandwich beam using numerical-based inhomogeneous Wave Correlation method », International Conference on Acoustics and Vibration ICAV2016, March 21-23 2016, Hammamet, Tunisia.
4-Ramzi AJILI, Olivier BAREILLE, Mohamed Lamjed BOUAZIZI, Mohamed Najib ICHCHOU, Noureddine BOUHADDI « Parameter identifacation of a sandwich beam using numerical-based inhomogeneous Wave Correlation method », International Conference on Acoustics and Vibration ICAV2016, March 21-23 2016, Hammamet, Tunisia. 5- Issam ABED, Najib KACEM, Noureddine BOUHADDI, Mohamed Lamjed BOUAZIZI,
“Nonlinear dynamics of magnetically coupled beams for multi-modal vibration energy
harvesting”,JW Mariott Las Vegas Resort Spa Las Vigas, Nevada, 20-24 March 2016.
6- Issam ABED, Najib KACEM, Mohamed Lamjed BOUAZIZI, Noureddine BOUHADDI, , “ Optimized nonlinear MDOF energy harvesting on electromagnetic coupling”, International Conference on Acoustics and Vibration ICAV2016, March 21-23 2016, Hammamet, Tunisia. 7-Issam ABED, Nejib KACEM, Mohamed Lamjed BOUAZIZI, Noureddine BOUHADI,
"Non-Linear 2-DOFs vibration energy harvester based on magnetic levitation", International
Modal Conference IMAC2015, Orlando, Florida February 2015, USA.
-Master 3 : ALJANE Rabia, Study of graph analysis methods sensitivity: Application to the
dynamics of Structures, defended at ENIT, 05/ 07/2013. Supervisor : Samir GHANMI, Mohamed Lamjed BOUAZIZI, IPEIN, Tunisa.
Graduation Project
- Students : Ali Abdulsamed ALKANBAR, Maher Abdulrahman AL-RADDADI, Hjab
Saad AL-OLAIMI, Fahad Khalid ALSUBAIE, Mishal Salem AL-YAMI, « Mechanical
Design of Delivery Drone », Defended May, 2018. Supervisors : Pr.Mohamed Lamjed
BOUAZIZI, Dr. Jamel CHAKHARI and Eng. Miloud TLILI, 2018.
- Students : Mohamed Aymen SHAER, Mshari ANZI, Houssein GAHTANI and Torki
KORNI, « Study and design of a solar tower with chimney effect for electricity
production », Defended December, 2016. Supervisors : Mohamed Lamjed BOUAZIZI,
Jamel CHAKHARI and Habib Ben BACHA, 2016.
- Students : Abdulaziz ALJUAIDI, Saud ALQAHTANI, Saed SAIF , Hussain
ALMENHALI, Fahad ALSHAHRANI and Fahad ALDOSSARI, , « Study and Design of
a Feeding System in the Folding Machines », Defended Mai, 2014. Supervisors :
Mohamed Lamjed BOUAZIZI, Jamel CHAKHARI and Aouni BISHARAT,2014.
Reviewer of the
following journals and
Conferences
- Second International Conference on Acoustics and Vibration, 2018. - International Journal of Mechanics Sciences, 2016. - Probalistic Engineering Mechanics, 2016. - International Journal of Machining and Machinability of Materials, 2013. - International Journal of Mechanical Sciences, 2012.
- Condition Monitoring of Machinery in Non-Stationary Operations Conference, 2012. - MECCANICA Journal, 2010. - Computers & industrial Engineering, 2009. - Finite Elements in Analysis and Design, 2009.