CURRICULUM VITAE Name: Dr. ARSHAD UMAR Designation Professor, Dept. of Civil Engineering Aligarh Muslim University, Aligarh. * Father‟s Name: Late Prof. Sarfaraz Umar Date of Birth: 23 rd Feb, 1960 Specializaton: Offshore Structures, Self Compacting Concrete Qualifications: Examination passed Name of Univ./Instt . Year of Passing Div./Class %age of Marks Obtained Subjects offered Ph.D. I.I.T. Delhi 2000 Topic of research: Nonlinear Response of a Moored Vessel M. Tech. (Applied Mech. P/T) I.I.T. Delhi 1991 I Div. (Hons) 8.83 C.G.P.A on 10 Point Scale Applied Elasticity, Applied Plasticity, Adv. Dynamics, etc. B.Sc. Engg. (Civil) A.M.U. Aligarh 1984 I Div. (Hons) 83.79 All Civil Engg. Subjects P.U.C A.M.U. Aligarh 1978 I Div. & V Rank 82.94 English, Maths Physics, Chemistry Sunni Theology etc High School A.M.U. Aligarh 1977 I Div. & III Rank 77.07 English, Maths, Science, Tech. Art Sunni Theology etc. Total Experience: 32 years and three months (Please refer Annexure I) Teaching & Research: 28 years and three months Industrial: 4 Years Publications: 46 (Refereed Journals: 23; Conferences: 23) (Please refer Annexure II) International Journals 12 +1 (accepted) National Journals 10 Communicated Paper (International Journal) 01 Citation of Research Papers 122 (Please refer Annexure II)
15
Embed
Curriculum Vitae - Aligarh Muslim University VITAE Name: Dr. ARSHAD UMAR Designation Professor, Dept. of Civil Engineering Aligarh Muslim University, Aligarh.* Father‟s Name: Late
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CURRICULUM VITAE
Name: Dr. ARSHAD UMAR
Designation Professor, Dept. of Civil Engineering Aligarh Muslim University, Aligarh.*
Citation of Research Papers 122 (Please refer Annexure II)
2
M. Tech Dissertations Supervised 20** (Please refer Annexure III)
**Ten of the supervised Graduate (M. Tech.) dissertation works got published in Refereed Journals
B.Tech Projects supervised
University of Bahrain 14
Aligarh Muslim University 20 +02 (In Progress)
Workshops Organised: 05
Training, Conferences and Workshops Attended 21 (Please refer Annexure IV)
Software Developed
Name of the Software Purpose
DYNVES Dynamic Analysis of a floating vessel
STABVES Stability Analysis of Moored Floating System
DYNHBM Dynamic analysis of Moored Vessel using two- term Harmonic Balance method
BUCCMP Buckling analysis of laminated composite plates
Sponsored Project:
S. No
Title Sponsoring Agency Amount
Duration Status
1. Influence of locally available viscosity modifying admixtures on fresh and hardened properties of Self Compacting Concrete.
Deanship of Scientific Research, University of Bahrain
2450.0 Bahraini
Dinar
Sept., 2008 –Aug.,2009
Completed
Reviewer of International Journal:
Reviewed Research Paper contributed to the Journal of Ocean Engineering, Elsevier Science publication (Manuscript No. OE-D-07-00303)
Invited Lectures:
Delivered an invited lecture on “Stability analysis of offshore floating vessels.” In the workshop on Recent Trends in Building Design at AMU Aligarh on 6th September, 2000.
Delivered a lecture on "Geometric Nonlinearity and its effects on the stability of a floating system". First Engineering Scientific Research Forum, University of Bahrain,18th May, 2009.
3
Delivered a lecture on “The effect of locally available viscosity modifying admixture on the properties of self compacting concrete (SCC)”. Department of Civil Engineering, University of Bahrain, 7th June, 2010
Courses Taught
1. Strength of Materials 2. Structural Analysis 3. Bridge Engineering
Jr. Engineer 12/05/1986 18/05/1989 Planning & Designing of Buildings
9
Uttar Pradesh State Road Transport Corporation (UPSRTC)
Management Trainee (Tech.)
13/10/1985 08/05/1986 Construction/ Maintenance of Bus Stations in Ghaziabad Region
10 Hindustan Construction Company Ltd. (HCC)
Engineer (Civil)
14/12/1984
20/05/1985
Supervision of concreting in tunnels in Narmada project
*Availed EOL from Aligarh Muslim University for 5 years from 5th Sept., 2007 to 31
st Aug.,2012 and worked in
the Department of Civil Engineering. and Architecture, University of Bahrain, Bahrain
7
ANNEXURE II
PUBLICATIONS
INTERNATIONAL JOURNALS
1 Umar, A., Qadeer, A., Abbas, H. and Sehgal, D.K. (1996). “Prediction of error in finite element results.” International Journal of Computers & Structures, Vol. 60, No. 3, 471-480. (cited by 7) IF 2.676
2 Amanullah, M., Siddiqui, N.A., Umar, A. and Abbas, H. (2002) “Fatigue reliability analysis of welded joints of a TLP tether system.” Steel and Composite Structures, An International Journal. 1.615 Vol. 2, No. 5. Pp.331-354. (cited by 7) IF 0.933
3 Umar, A., and Datta, T.K. (2003) “Nonlinear response of a moored buoy.” International Journal of Ocean Engineering, Elsevier Science publication Vol. 30, pp 1625 – 1646. (cited by 37) IF-1.615
4 Umar, A., Suhail, A. and Datta, T.K. (2004) “Stability analysis of a moored vessel.” International Journal of Offshore Mechanic and Arctic Engineering (OMAE), Transactions of the ASME, Vol. 126, No. 2, pp. 164 – 174. (cited by 6) IF 0.64
5 Shah, A. A., Umar, A. and Siddiqui, N. A. (2005) “A methodology for assessing the reliability of taut and slack mooring systems against instability.” International Journal of Ocean Engineering, Elsevier Science publication..Vol. 32, pp. 1216 –1234. (cited by 16) IF-1.615
6 Kamruzzaman, M., Umar, A., Naq vi, S.Q.A., and Siddiqui, N.A.S. (2006) “Effect of composite types and its configuration on buckling strength of thin laminated composite plates.” Latin American Journal of Solids and Structures, Vol 3, pp. 279 – 299. (cited by 9) IF 1.254
7 Siddiqui, N. A., Khan F.H., Umar, A., (2009) “Reliability of underground concrete barriers against normal missile impact”, The Computers and Concrete – An International Journal ,Vol. 6, No. 1, pp. 79-93. (cited by 7) IF 0.936
8 Umar, A., Datta, T.K. and Suhail, A., (2010) “Complex dynamics of slack mooring system under wave and wind excitations” Open Oceanography Journal, Vol. 4, pp. 9-31. (cited by 3)
9 Umar, A., Al-Tamimi A., (2011). “Influence of viscosity modifying admixture on the properties of SCC produced using locally supplied materials in Bahrain.” Jordan Journal of Civil Engineering, Vol. 5, No. 1, pp.32 -49. (cited by 9)
10 Umar, A. (2014) “„Sustainable Concrete by Partially Replacing Sand using GRP Powder Waste‟‟. International Journal of Engineering Technology, Management and Applied Sciences. Vol. 2 No. 6. pp.36-51.
11 Subhan Ahmad, Arshad Umar (2017) “Characterization of self compacting concrete”. Procedia
Engineering (Elsevier) Vol 173(C). pp 814-821.
12 Subhan Ahmad, Arshad Umar and Amjad Masood (2017) “Glass Fibre-reinforced Self-Compacting Concrete”. Procedia Engineering (Elsevier) Vol 173(C). pp 807-813 . (cited by 2)
13 Amjad Masood , M. Masroor Alam , Arshad Umar , Mohd Shariq and Abu Haiyan “Behavior of confined high strength concrete at elevated temperature” Computers & Concrete - An International Journal, Techno-Press (Communicated)
8
14 Subhan Ahmad, Arshad Umar and Amjad Masood (2017) “Influence of Polyvinyl Alcohol Fibres on Fresh and Hardened Properties of Self-Compacting Concrete” SKIT Research Journal – An International Journal accepted for publication in October, 2017
NATIONAL JOURNALS
15 Umar, A. and Siddiqui, N.A. (2002) “Reliability analysis of a moored vessel.” Journal of Structural Engineering. SERC, India, Vol. 29, No. 3, pp. 171-174. (cited by 3)
16 Umar, A., and Datta, T.K. (2003) “Dynamic analysis of a moored vessel.” Journal of Structural Engineering. SERC, India, Vol. 29, No. 4, pp. 229 – 237. (cited by 1)
17 Umar, A., and Datta, T.K (2003). “Estimation of wave forces in finite depth of water – a comparative study.” Journal of Structural Engineering. SERC. India, Vol. 30, No. 3, pp. 179 – 187.
18 Khan, U., Siddiqui, N.A., Umar, A., and Abbas, H. (2003). “Local damage of plain and reinforced concrete targets under impact load.” Defence Science Journal, DRDO, India, Vol. 53, No. 1, Jan. 2003, pp. 67 – 73. (cited by 4) IF 0.359
19 Anver, N., Umar, A. and Siddiqui, N.A., (2004). “Effect of geometric nonlinearity on response
behavior of a multipoint mooring system”. Journal of Advances in Vibration Engineering, Bangalore, India, Vol. 3, No. 3, pp. 208 – 222. H INDEX 5
20 Siddiqui, N.A., Jameel, M., Umar A and Ahmad, S. (2005). “Nonlinear coupled response of Tension Leg Platform.” Journal of Advances in Vibration Engineering, Bangalore, India. Vol. 4, No. 1, pp. 67 – 82. (cited by 1)
21 Umar, A., Datta, T.K. and Ahmad, S. (2006). “Response characteristics of moored vessel under random sea.” Journal of Advances in Vibration Engineering, Bangalore, India, Vol. 5, No. 1, pp. 33 – 41.
22 Umar, A., Seema and Datta, T.K., (2006). “Dynamic analysis of a taut mooring system under first and second order wave forces”, Journal of Structural Engineering. SERC, India, Vol. 33, No. 4, pp. 297 – 307.
23 Siddiqui, N.A., Umar, A. and Saxena, A. K. (2008). “Non-Linear Coupled Response of TLP Under Random Wave and Impulsive Forces”, Journal of Structural Engineering. SERC, India, Vol., 34, No. 5, pp.369 -376.
24 Umar, A. and Al-Tamimi, A., (2011). “A critical study of the effect of viscosity modifying admixture and glass fibers on the properties of self compacting concrete (SCC)”, Journal of Structural Engineering, Vol. 38, No. 2, June - July 2011 pp. 153–162. (cited by 4)
INTERNATIONAL AND NATIONAL CONFERENCES
1. Umar, A., Qadeer, A., Abbas, H. and Sehgal, D.K. (1994). “An extrapolation technique for prediction using coarse mesh.” Proceedings of Tenth Symposium on Earth Quake Engineering, Roorkee, Vol. 2, 975-981.
2. Umar, A., Abbas, H., Qadeer, A. and Abbas, M. (1995). “Error modeling in finite element analysis of shell structures.” Proceedings of National Seminar on High Rise Structures, Allahabad. Pp. II 78-II 83.
9
3. Umar, A., Datta, T.K. and Suhail, A. (1997). “Second order wave forces on large offshore structures.” Proceedings of the International Conference on Ship and Ocean Technology (SHOT‟ 97), I.I.T. Kharagpur, pp. 110-116. (cited by 2)
4. Umar, A. and Siddiqui, N.A (2000). “Reliability analysis of multipoint mooring system.” International Conference on Quality, Reliability and it at the turn of Millenium, 21 – 23 Dec. 2000, New Delhi.
5. Umar, A., and Datta, T.K. (2001). “Stability analysis of a moored system.” Proceedings of the Structural Engineering Convention-An International Meet (SEC – 2001), I.I.T Roorkee, pp. 636 – 654. (cited by 4)
6. Umar, A., Datta, T.K. and Suhail, A. (2001). “Wave Force Estimation – A Critical Study.” International Conference in Ocean Engineering – 2001 (ICOE-2001), 10th-14th Dec. , I.I.T Madras, Paper No MH8. Pp. 125 – 131.
7. Umar, A., and Datta, T.K. (2001). “First and Second Order Wave Forces – A Critical Study.” Proceedings of the International Conference on Engineering for Ocean & Offshore Structures 19th– 21st Dec., Singapore.
8. Umar, A., Datta, T.K. and Suhail, A. (2002). “Effect of geometric nonlinearity on the stability of a moored system.” Proceedings of the International Conference on Ship and Ocean Technology (SHOT‟ 2002), 16 – 18 December, I.I.T. Kharagpur.
9. Khan, U., Siddiqui, N.A., Umar, A., and Abbas, H. (2002). “Local damage in concrete targets under impact load.” Symposium on Large Deformation. India International Centre, New Delhi pp. 22.
10. Anver, N., Umar, A. and Siddiqui, N. A., (2002). “Nonlinear response of multipoint mooring systems.” Symposium on Large Deformation, India International Centre, New Delhi, pp.26.
11. Umar, A., Datta, T.K. and Ahmad, S. (2003). “Statistical Characteristics of the Surge Response of moored buoy under random sea.” National conference on Advances in Civil Engineeering: Perpectives of developing countries ACEDEC 2003. 15-16 February, HBTI, Kanpur pp 30 – 40.
12. Jameel, M., Siddiqui, N. A., and Umar, A. (2003). “Nonlinear Response of Tension Leg Platforms under wave and wind loading” National conference on Advances in Civil Engineering: Perpectives of developing countries ACEDEC 2003. 15-16 February, HBTI, Kanpur, pp 90 – 98.
13. Umar, A., Naqvi, S. Q. A., Faisal A., and Datta, T.K. (2004) “Dynamic stability analysis of moored system under wave and wind excitations” SEM –04 ,Birla Institute of Technology & Science, Pilani, September 2004
14. Umar, A., Naqvi, S. Q. A., Seema., and Datta, T.K. (2004). “Dynamic analysis of a taut mooring system” INCHOE 2004, National Institute of Oceanography, Dona Paula, Goa, 7th –9th Dec. 2004. Pp 373 – 381.
15. Naqvi, S. Q. A., Umar, A., Ahmad, S., and Datta, T.K. (2005). “Wave force estimation in deep water – A critical study”. Proceedings of National Seminar on Sustainable Infrastructure for National Development (NSSIND), Aligarh,17-18 April, 2005.pp. 71-81.
16. Kamruzzaman, Naqvi, S. Q. A., Umar, A., Siddiqui, N.A. (2005). “Buckling behavior of rectangulari-symmetric laminated plates”. Proceedings of National Seminar on Sustainable infrastructure for National Development (NSSIND), Aligarh, 17-18 April, 2005. Pp. 83-91.
10
17. Umar, A., and Datta, T.K. (2006). “A critical study on the wave force estimation” Proceedings of All India seminar on Advances in Product Development, Motilal Nehru National Institute of Technology, Allahabad (MNNIT) 17 – 18th Feb. 2006.
18.Umar, A., and Datta, T.K. (2006). “Geometric nonlinearity and its effects on the stability of a floating system”Proceedings of National Conference on Earth Quake Disaster Technology and Mananagement, Motilal Nehru National Institute of Technology, Allahabad (MNNIT), 11 – 12th Feb. 2006, pp. VI – 49 to VI – 53.
19. Umar, A., Ahmad, S., and Faizan, U. K., (2007). “Dynamic Analysis of Slack Mooring System
under Wave and Wind Excitations” Proc. Of First National Conference on Civil Engineering: Advances and Challenges, to be held at Maharishi Markandeshwar Engineering College Mullana, Ambala, Haryana from 9-10th March 2007.
20. Umar, A., and Al-Tamimi, A., (2010). “A study of the effect of viscosity modifying admixture on the properties of self compacting concrete (SCC)” 9th International Conference on Advances in Civil Engineering, Sept., 27-30, 2010. Karadeniz Technical University, Trabzon, Turkey.
21. Umar, A., Tamimi, A. "A critical study of the performance of self compacting concrete (SCC) using locally supplied materials in Bahrain" is Accepted for the presentation in the “International Conference on Recent Trends in Engineering and Materials Science ICEMS-2016” to be held between March 17 -19, 2016. The Abstract ID: 1-IC-1425.
22. Umar, A. Masood, A., Ahmad, S (2016). “A comparative study of the performance of self-
compacting concrete using glass and polyvinyl alcohol fibres”. International Conference on
Hybrid And Composite Materials, Chemical Processing (HCMCP)-2016. St. Peter’s Engineering
College, Hyderabad, Telangana, India, 25th
-27th
October. pp. 27-33.
23. Amjad Masood, Arshad Umar, Tazyeen Ahmad and Mohd. Shariq (2016). “ Residual strength
properties of quartzite, granite and basalt aggregate concrete subjected to single heating-cooling
cycle” International Conference on Hybrid And Composite Materials, Chemical Processing
(HCMCP)-2016. St. Peter’s Engineering College, Hyderabad, Telangana, India, 25th
-27th
October.
11
ANNEXURE III
M. TECH DISSERTATIONS SUPERVISED S. No
Name of the Candidate
Title of the Dissertation Year Publication status
1. M. Amanullah Fatigue reliability analysis of a tension leg platform.
2001 Published in Steel & Composite. Structures, An Inernational Journal
2. N. Anver Dynamic analysis of moored oil tankers.
2002 Published in Advances in Vibration Engineering.
3. M. Jameel Dynamic analysis of tension leg platforms.
2002 Published in Advances in Vibration Engineering.
4. U. Khan Impact resistance of plain and reinforced concrete
2002 Published in Defence Science Journal.
5. A.K. Saxena Nonlinear dynamic response of Tension Leg Platform under random sea.
2003 Accepted in Journal of Structural Engineering
6. A. A. Shah Reliability assessment of mooring systems against instability.
2004 Published in Ocean Engineering, Elsevier.
7. F. H. Khan Reliability assessment of underground concrete barriers against missile impact.
2004 Communicated to Structural Safety, Elsevier
8. Seema Dynamic Analysis of taut mooring system
2004 Published in Journal of Structural Engineering
9. M. Kamruzzaman Buckling analysis of orthotropic thin composite plates.
2005 Latin American Journal of Solids & Structures
10. Asjad Faisal Stability analysis of offshore floating vessels
2005
11. Neyaz Ahmad Response characteristics of the moored buoy under random sea
2005
12.
Mohd Amir Dynamic Stability analysis of a taut mooring system.
2006
13. Shoeb Arif Local response of Concrete slabs under impacr loading
2006
14. Faizan Ullah Khan
Dynamic analysis of a slack mooring system under wave and wind excitations
2006
15. Zishan Khan Dynamic analysis of a spar Platform
2007
16. Mohd. Moin Analysis of a high rise building 2007 17. Abu Haiyan Behaviour of Confined
Concrete at Elevated Temperature
2014
18. Subhan Ahmad Effects of glass fibers on the fresh and hardened properties of self compacting concrete
2015 Published two papers in Procedia Engineering (Elsevier)
19.
Mohd. Nayeem Ansari
Effect of elevated temperature on the properties of self compacting concrete using
2015-16 Completed
12
glass and poly vinyl fibers.
20.
Ayush Chauhan Behaviour of High Strength R.C. Confined Column with polypropylene fibers at elevated temperature
2015-16 Completed
21 Harshit Saxena A Critical Study of the effects of Metakaolin and steel fibers on the fresh and hardened properties of self compacting concrete
2016--17 In Progress
13
ANNEXURE IV Seminars, Symposia, Workshops, Refresher Courses, Summer Institutes etc. Attended
Name of the Seminar / Conference Symposia Workshops/Refresher Course/Summer Institutes
Name of the Sponsoring Agency
Place and period spent
Foundation Course (Maintenance Management)
CIRT, Pune Pune Nov. 22 – Dec. 6.,1985
Course on Computer Programming in FORTRAN
Computer Centre, A.M.U. Aligarh
Aligarh July 31- Aug. 28, 1989
Tenth Symposium on Earthquake Engineering
University of Roorkee and Indian Society of Tech. Roorkee
Roorkee November 16 – 18, 1994
National Seminar on High Rise Structures
The Institution of Engineers & M.N. Regional Engineering College, Allahabad
Allahabad Nov. 14 – 16, 1995
International Conference on Ship and Ocean Technology (SHOT‟97)
I.I.T Kharagpur
Kharagpur March 5 –8,1997
Workshop on Recent trends in building design
AICTE & ISTE A.M.U. Aligarh September 4 – 16,2000
Workshop on Disaster Awareness and Management
National Centre for Disaster Management, Indian Institute
of Public Administration, N. Delhi
A.M.U. Aligarh March 1-2, 2001
Structural Engineering Convention-An International Meet (SEC – 2001)
AICTE, ECC-L&T Ltd, Hudco, CSIR, Atomic Energy
Regulatory Board, UOR& CBRI
IIT Roorkee October 29 – 31, 2001
International Conference in Ocean Engineering - 2001 (ICOE – 2001)
IIT Madras Madras Dec. 10 –14, 2001
National Workshop on Wind Effects on Building and Structures
AICTE and ISWE A.M.U. Aligarh February 1-2, 2002
Symposium on Large Deformation IIT Delhi New Delhi Sept. 1, 2002
Referesher Course on Advances in Civil Engineering and Architecture
UGC and ISTE A.M.U. Aligarh Dec. 10 – 31, 2002
Short term introductory course on “Seismic Analysis and Design of Structures”
NPEE and IIT Delhi Dec. 8- 12, 2003
National Seminar on Sustainable Institution of Engineers April 17 – 18, 2005
14
Infrastructure for National Development (NSSIND).
National Conference on Earth Quake Disaster Technology and Mananagement.
Institution of Engineers (Allahabad Local Chapter) &
Motilal Nehru National Institute of Technology,
Allahabad (MNNIT)
Feb. 11 – 12, 2006.
All India Seminar on Energy Management in Process Industries (EMPI).
Institution of Engineers (Aligarh Local Chapter)
(Petro-chemical, AMU)
Feb. 18 – 19, 2006.
Advances in Civil Engineering (ACE) 2010
Karadeniz Technical University, Trabzon, Turkey
Sept., 27 – 30, 2010
National workshop on „Advances in Water Resources Development and Management‟
Under TEQIP-II
Department of Civil Engineering, AMU., Aligarh
Feb.,23, 2013
National workshop on „Advances in Structural Engineering‟
Under TEQIP-II
Department of Civil Engineering, AMU., Aligarh
March 06, 2013
National workshop on „Advances in GeoTechnical and Transportation Engineering‟
Under TEQIP-II
Department of Civil Engineering, AMU., Aligarh
March 09, 2013
Workshop on „ Innovative Construction Machinery, Materials and Methods (ICMMM- 2015) „
Indian Society for Construction Materials and
Structures (ISCMS) and Indian Institute of
Technology, Roorkee,
October 26-27, 2015.
National workshop on „Higher Technical Education: Themes, Challenges & Opportunities‟
Under TEQIP-II Zakir Hussain College of
Engineering & Technology, AMU Aligarh
September 24-25, 2016
International Conference on Hybrid And Composite Materials, Chemical Processing (HCMCP)-2016. St. Peter‟s Engineering College, Hyderabad, Telangana, India
Elsevier Materials Today:
Proceedings
October 25-27, 2016
15
Annexure V
Events organized by ASCE AMU International Student Chapter, Department of Civil
Engineering
The inaugural function of ASCE AMU International student chapter held on 4th April, 2014.
Concrete Quiz organized on 4th April, 2014.
Organised „Ingenio‟, a paper presentation competition on 6th April, 2014
Orientation ceremony for Ist year B.Tech Engg. Students organized on 1st September, 2014.
Guest Lecture on „Importance of Civil Services‟ BY Mr. Raja Yaqoob Farooq (IRS),
Mr.Mudassir Shafi and Dr. Ehtesham Waqarib (IRS) held on 6th September, 2014
Meeting with ASCE International director on 9th September, 2014
Extension Lecture on „Solid Waste Management ‟ by Prof. Absar Kazimi, Professor,
Department of Civil Engineering, IIT Roorkee, on 13th September, 2014
Extension Lecture on 'Performance Evaluation of Effluent Treatment Plants' by Er.
Nazimuddin, Senior Environmental Engineer, Central Pollution Control Board, New Delhi, on,
13th September, 2014.
Extension Lecture on „Concrete Mix Design ‟ by Er. Awadhesh Kumar Mishra, Deputy
Manager, J.K. Cement Ltd., on 15th October, 2014.
Visit to Narora Atomic Power Station, Narora and Narora Barrage on 12th Nov.,2014.
Following activities were performed in the session.2015-16:
Orientation ceremony for Ist year B.Tech Engg. Students organized on 2nd September, 2015.
Organised Webinar on Building Information Modeling by Bantley Systems
Organised an Educational visit to Narora Atomic Power Station, Narora and Narora Barrage
on 18th Nov., 2015.
Organised “Software Training Programme” on STAAD PRO between 21- 25 Jan., 2016 in the
Department of Civil Engineering, AMU Aligarh.
Organised a Guest Lecture “UPSC – Gateway to the IAS and other Central Services” by Mr.
Idrees M. Ghani Khan, Former Member, Union Public Service Commission and Secretary
(Retd.), Department of Posts, Ministry of Communications, Government of India. on
25thFeb., 2016
Organised a Two Day Workshop on Thesis Writing, Referencing and Plagiarism on 8th – 9th
March, 2016
Following activities were performed in the session.2016-17:
Orientation ceremony for Ist year B.Tech Engg. Students organized on 6th October , 2016.
Organised an Educational visit to Agra -Lucknow Expressway, Shikohabad on 19th November