84 4 Cu Patch Cable DualBoot ® Standard Advantages: • overmoulding guarantees permanent performance metrics • highest torsion protection • highest tensile and compression protection • up to 1500 mating cycles • 50μ gold layer thickness on contacts Rating: ★ ★ ★ ★ Gland + Overmoulding + Plug (TM21, TM31, saCon ® , EMT) DualBoot ® PushPull Advantages: • same as DualBoot ® Standard • unlocking also possible under cramped conditions • 50μ gold layer thickness on contacts Rating: ★ ★ ★ ★ ★ PushPull Gland + Overmoulding + Plug (saCon ® ) DualBoot ® LED Advantages: • same as DualBoot ® • unlocking also possible under cramped conditions • 50μ gold layer thickness on contacts Rating: ★ ★ ★ ★ ★ Gland + LED + Overmoulding + Plug (saCon ® ) *on request; Tera™ is a registered trademark of Siemon Company Standard Connector Types Manufacturer TM11, TM21, TM31 saCon ® Tera ™ saCon ® Industry EMT * SS39 Hirose Electric Group ZVK GmbH Siemon Company ZVK GmbH Tyco Electronics Bel Stewart FlexBoot Advantages: • inexpensive • 30μ gold layer thickness on contacts Rating: ★ ★ ★ Gland + Plug (TM21, TM31, saCon ® ) www.easylan.de/en
19
Embed
Cu Patch Cable - EasyLan · PDF file04 Cu Patch Cable Contents ... • Accessories DualBoot® LED detector, color coding clips 89 ... Field installable RJ45 plugs
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• Cat. 6A connector: saCon® or TM31, FlexBoot Boot 94
• Cat. 6 connector: saCon® or TM21, FlexBoot Boot 95
Patch cable Tera™ RJ45 / Tera™
• Patch cable RJ45 90° 96
• Patch Cable RJ45 Tera™, 1-pair, unshielded 97
• RJ45 Tera™ 2- or 4-pair shielded 98
• RJ45 Tera™ 1-pair unshielded 99
• Patch cable VoIP RJ45, shielded 100
Accessories
• Color coding clips, heat shrink tube, laminating labels 101
Field installable RJ45 plugs
• Cat. 6 HARTING RJ Industrial® 10G 102
Tera™ is a registered trademark of Siemon Company
www.easylan.de/en
Patc
h ca
ble
Cu
86
DualBoot® LED Patch Cable Cat. 6A ISO/IEC, Shielded
DualBoot® LED patch cables have been specially developed for use in offices, industrial facilities and data centers. The rugged cable design ensures that electrical transmission parameters can only be affected by the use of physical force. The use of a special combination shield (PiMF + braided shield with 65% covering) and 360° shielded RJ45 plugs provides maximum data transmission reliability. The patented method for simple assignment of the plugs to each other significantly increases operating reliability, which makes accidentally pulling apart the patch cables virtually impos-sible. Both RJ45 housings are optically excited and light up following contact of a patch cable end with the detector. Service mapping may also be effected at a later point in time via the application of color coding. An RFID chip can also be added for automatic network detection.
Please find the appropriate detector on page 93. Use of a non-approved detector may cause permanent damage to DualBoot® LED patch cables.
Length Optical detection up to 100mChemical Properties Free of hazardous substances according
to RoHS 2002/95/EGPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dmGHMT certified
Description Ordering codeDualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, white CS1OWADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, black CS1OSADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, gray CS1OAADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, red CS1ORADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, yellow CS1OYADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, green CS1OGADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, blue CS1OBADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, turquoise CS1OTADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, violet CS1OVADADxxxx
DualBoot® LED Patch Cord, Cat. 6A (ISO/IEC), shielded, orange CS1OOADADxxxx
xxxx = length in dm
www.easylan.de/en
87
DualBoot® LED Patch CableCat. 6, Class EA ISO/IEC, Shielded
DualBoot® LED patch cables have been specially developed for use in offices, industrial facilities and data centers. The rugged cable design ensures that electrical transmission parameters can only be affected by the use of physical force. The use of a special combination shield (PiMF + braided shield with 65% covering) and 360° shielded RJ45 plugs provides maximum data transmission reliability. The patented method for simple assignment of the plugs to each other significantly increases operating reliability, which makes accidentally pulling apart the patch cables virtually impossible. Both RJ45 housings are optically excited and light up following contact of a patch cable side with the detector. Service mapping may also be effected at a later point in time via the application of color coding. An RFID chip can also be added for automatic network detection.
Please find the appropriate detector on page 93. Use of a non-approved detector may cause permanent damage to DualBoot® LED patch cables.
shield with 65% covering) Plug conforms to EN 60603-7 with 360° shieldingElectrical Specifications Cat. 6 suitable for Class EA 500 MHz data transmissionConnector saCon®
Length Optical detection up to 100mChemical Properties Free of hazardous substances according
to RoHS 2002/95/EGPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm GHMT certified
Description Ordering codeDualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, white CS1OWCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, black CS1OSCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, gray CS1OACDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, red CS1ORCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, yellow CS1OYCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, green CS1OGCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, blue CS1OBCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, turquoise CS1OTCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, violet CS1OVCDCDxxxx
DualBoot® LED Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, orange CS1OOCDCDxxxx
xxxx = length in dm
www.easylan.de/en
Patc
h ca
ble
Cu
88
DualBoot® LED ISDN-Patch Cable UTP2-pair (36/45), 1:1 Pinout, Unshielded
DualBoot® LED ISDN patch cables have been specially developed for use in offices, industrial facilities and data centers. The rugged cable design ensures that electrical transmission parameters can only be affected by the use of physical force. The patented method for simple assignment of the plugs to each other significantly increases operating reliability, which makes accidentally pulling apart the patch cables virtually impossible. Both RJ45 housings are optically excited and light up following contact of a patch cable end with the detector. Service mapping may also be effected at a later point in time via the application of color coding. An RFID chip can also be added for automatic network detection.
Please find the appropriate detector on page 93. Use of a non-approved detector may cause permanent damage to DualBoot® LED patch cables.
Electrical Specifications Cat.3 Length Optical detection up to 100 mChemical Properties Free of hazardous substances according to RoHS 2002/95/EGPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Description Ordering codeDualBoot® LED ISDN Patch Cord, Cat. 3, unshielded, 2-Pairs (36/45), green CSIWGCDCDxxxx
xxxx = length in dm
www.easylan.de/en
89 www.easylan.de/en
AccessoriesDualBoot® LED
DualBoot® LED Detector
Power supply for DualBoot® LED patch cables.
Simply plug the detector into the appropriate electrical contact pairs on the RJ45 plug. Repeatedly pushing on the button permits the selection of 4 different operating modes, allowing you to adjust to all lighting conditions. Batteries: 4 x button cell LR41.
Properties:
Material MetalColor chromeApplications suitable for voltage supply for all DualBoot® LED patch cables Packaging unit 1 pc.
Colourclip for DualBoot® LED Patch Cord
Plug marking clip for placement on the RJ45 plug boot of a DualBoot® LED patch cable.
Clips can simply be inserted in the plug‘s kink protection boot, enabling subsequent color-coded plug identification.May be equipped as needed with RFID chip for automatic recognition and archiving of patch cable ID.
Properties:
Material Polyamide (PA)Color yellow, red, blue, green, white, black,
pink, brown, purple, orange, gray – special colors on requestApplications Color and electrical coding of DualBoot®
LED Patch CablesPackaging unit 100 pcs.
Description Ordering codeDetector for DualBoot® LED Patch Cord/FO LED Patch CPZLWLA1
Colourclip for DualBoot® LED Patch Cord, white CSZCWS
Colourclip for DualBoot® LED Patch Cord, gray CSZCGR
Colourclip for DualBoot® LED Patch Cord, yellow CSZCYE
Colourclip for DualBoot® LED Patch Cord, magenta CSZCMG
Colourclip for DualBoot® LED Patch Cord, red CSZCRD
Colourclip for DualBoot® LED Patch Cord, blue CSZCBL
Colourclip for DualBoot® LED Patch Cord, green CSZCGN
Colourclip for DualBoot® LED Patch Cord, brown CSZCBN
Colourclip for DualBoot® LED Patch Cord, black CSZCSW
Colourclip for DualBoot® LED Patch Cord, pink CSZCRS
Colourclip for DualBoot® LED Patch Cord, orange CSZCOR
DualBoot® LED Marking Clips, assortment box CSZC11BOX
PushPull connection cable RJ45/RJ45, shielded 1:1 pinout and featuring DualBoot® overmoulding incl. PushPull unlock protection. In this RJ45 plug variant, the small RJ45 tab is not pressed to release, instead all you have to do is pull on the boot. PushPull locking works with any standard RJ45 socket and jack. The PushPull patch cable facilitates e.g. patching in densely packed data center patch panels, in difficult-to-access consolidation points or for subscriber ports in floor boxes. The plugs are optimized for applications in high density swit-ches. Use of DualBoot® overmoulding ensures optimal strain relief and eliminates catching of locking levers. The patch cable provides maximum data reliability via its foil shield and 360° shielded RJ45 plugs.
Color white, black, gray, red, yellow, green, blue, turquoise, violet, orangeBoot color gray, red, blue, yellow, green EMC Shielding / plug acc. to EN 60 603-7 with 360° shieldingConnector saCon®
Chemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
PushPull connection cable RJ45/RJ45, shielded 1:1 pinout and featuring DualBoot® overmoulding incl. PushPull unlock protection. In this RJ45 plug variant, the small RJ45 tab is not pressed to release, instead all you have to do is pull on the boot. PushPull locking works with any standard RJ45 socket and jack. The PushPull patch cable facilitates e.g. patching in densely packed data center patch panels, in difficult-to-access consolidation points or for subscriber ports in floor boxes. The plugs are optimized for applications in high density switches. Use of DualBoot® overmoulding ensures optimal strain relief and eliminates catching of locking levers. The patch cable provides maximum data reliability via its foil shield and 360° shielded RJ45 plugs.
Boot color gray, red, blue, yellow, greenEMC shielding / plug to EN 60603-7 with 360° shieldingElectrical specifications Cat. 6, class EA, 500 MHZChemical Properties Free of hazardous substances pursuant
to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Description Ordering codeDualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, white CPP1OWCWCWxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, black CPP1OSCSCSxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, gray CPP1OACACAxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, red CPP1ORCRCRxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, yellow CPP1OYCYCYxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, green CPP1OGCGCGxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, blue CPP1OBCBCBxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, turquoise CPP1OTCTCTxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, violet CPP1OVCVCVxxxx
DualBoot® PushPull Patch Cord, Cat. 6, Class EA (ISO/IEC), shielded, orange CPP1OOCOCOxxxx
Connection cable RJ45/RJ45, shielded 1:1 pinout and featuring DualBoot® overmoulding incl. unlock protection. This patch cable is suitable for installations in offices, data centers and industrial facilities. Plugs are optimized for applications in high density switches. Use of DualBoot® overmoulding ensures optimal strain relief and eliminates catching of locking levers. Service mapping via the application of color coding may also be carried out at a later point in time (special accessory). The patch cable provides maximum data reliability via its braided shield with pair shielding, as well as its 360° shielded RJ45 plugs.
to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dmGHMT saCon® version certified
Patch Cable RJ45 DualBoot® Cat. 6, Class EA, Shielded
Connection cable RJ45/RJ45, shielded 1:1 pinout and featuring DualBoot® overmoulding incl. unlock protection. This patch cable is suitable for installations in offices, data centers and industrial facilities. Plugs are optimized for applications in high density switches. Use of DualBoot® overmoulding ensures optimal strain relief and eliminates catching of locking levers. Service mapping also possible at later point in time via the application of color coding (special accessory). The patch cable provides maximum data reliability via its braided shield with pair shielding, as well as its 360° shielded RJ45 plugs.
Boot color yellow, gray, green, blue, red, black, white, magenta, orangeEMC shielding / plug to EN 60603-7 with
360° shieldingElectrical specifications Cat. 6, Class EA 500 MHz, Suitable for data transmission, GHMT certified Connector saCon®, TM21Chemical Properties Free of hazardous substances pursuant
to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 – 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm GHMT saCon® version certified
Patch Cable RJ45 FlexBoot Cat. 6A ISO / IEC, Shielded
Connection cable RJ45/RJ45, shielded 1:1 pinout with saCon® connector and FlexBoot boot. This patch cable is suitable for installations in offices and data centers. Service mapping may also be effected at a later point in time via the application of color coding (special accessory).
Sheath FRNC: IEC 60332-1-2; IEC 60754-2; IEC 61034Boot color yellow, green, blue, red, magenta, orangeEMC PiMf / Connector conforms to EN 60603-7 with 360° shieldingApproved connectors saCon®, TM31, Electrical specifications Cat. 6A 2nd FPDAM 2 to ISO/IEC 11801 AMD 2 (2009-04)Chemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Patch Cable RJ45 FlexBoot Cat. 6, Class EA, Shielded
Connection cable RJ45/RJ45, shielded 1:1 pinout and featuring Hirose TM21 plugs and FlexBoot® boot. This patch cable is suitable for installation in offices, data centers and industrial facilities.
Sheath FRNC: IEC 60332-1-2; IEC 60754-2; IEC 61034Boot color yellow, green, blue, red, magenta, orangeEMC PiMf / Connector conforms to EN 60603-7 with 360° shieldingApproved connectors saCon®, TM21, Electrical specifications Cat. 6A, class EA, 500 MHz, suitable for data transmissionChemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Connection cable RJ45/RJ45, shielded 1:1 pinout with angled RJ45 plugs. This patch cable is suitable for installations in offices and data centers. The use of a special combination shield (PiMF + braided shield) and the 360° shielded RJ45 plugs means the cable provides maximum data transmission reliability.Due to the large number of variations, each order is calculated separately.
Sheath FRNC: IEC 60332-1-2; IEC 60754-2; IEC 61034Boot color blackEMC Combination shield (PiMF + braided shield) / connector acc. to EN 60603-7 with 360° shieldingApproved connectors TM11, TM21, TM31Electrical specifications TM31: Cat. 6A TM21: Cat. 6 Chemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Figure: TM21; Also available in TM11 and TM31
Description TM21 TM3190° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, white on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, black on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, gray on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, red on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, yellow on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, green on request on request
90° Patch Cord, Cat. 6, Class EA (ISO/IEC), Hirose TM21, Boot down/Boot down, shielded, blue on request on request
www.easylan.de/en
97 www.easylan.de/en
Patch Cable AWG23 RJ45, SolidConShielded
Mainly intended for use in PoE applications (like Access Points).The advantage of this cable is that longer distances can be covered, as well as it’s higher current carrying capacity.
Cable AWG23/1 - F/FTP or U/FTPColor blueConnector color white-transparentGland blackElectrical specifications Cat. 6A ISO/IECPackaging unit Up to 3m in length: 10 units in polybag 3.01 – 5m in length: 5 units in polybag Over 5m: individually packed
Length key Last 4 digits in order code = length of cord in dm
Description Ordering codePatch cable AWG23 RJ45, SolidCon, 1 m CP1PoEBQSQS0010
Patch cable AWG23 RJ45, SolidCon, 2 m CP1PoEBQSQS0020
Patch cable AWG23 RJ45, SolidCon, 3 m CP1PoEBQSQS0030
Patch cable AWG23 RJ45, SolidCon, 5 m CP1PoEBQSQS0050
Patch cable AWG23 RJ45, SolidCon, 7,5 m CP1PoEBQSQS0075
Patch cable AWG23 RJ45, SolidCon, 10 m CP1PoEBQSQS0100
Patc
h ca
ble
Cu
98
Patch Cable RJ45 Tera™2 or 4-pair, Shielded
Depending on requirements, data and connection cables are equipped with Tera™ or RJ45 plugs, whereby RJ45 plugs are marked with kink-protection color indicating the relevant use (yellow for Ethernet, blue for Token Ring and green for ISDN).All cable types are adapted to their respective applications, with the 4-pair version designed for use in the 10 GHz bandwidth range.
Sheaths / Color FRNC/LSOH (Kink protection Tera™ black /RJ45-color) / grayEMC Combination shield (PiMF + braid) / plug to EN 60603-7 with 360° shieldingChemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Tera™ is a registered trademark of Siemon Company xxxx = length in dm
www.easylan.de/en
99 www.easylan.de/en
Patch Cable RJ45 Tera™1-pair, Unshielded
Depending on requirements, patch and connection cables are equipped with unshielded 1-pair Tera™, RJ45 or RJ11/RJ12 plugs, whereby the RJ45 plugs feature a kink pro-tection gland. Cable is offered in FR / LSOH or FR / PVC versions and is adapted for the relevant application.
Standards:
Telephone
Properties:
Cable FR / LSOH or FR / PVCColor black or gray Chemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
Tera™ is a registered trademark of Siemon Company xxxx = length in dm
Patc
h ca
ble
Cu
100
Patch cable VoIP RJ45 Shielded
Connection cable RJ45/RJ45 shielded with a 1:1 assignment. A saCon plug with dual-boot overmolding is used on one end. On the second end, a highly compact RJ45 connector is used. This cable was specially developed for the VoIP application since e.g. very little space is available for the plug in VoIP phones. The cable used offers a maximum data security thanks to its braided shield with pair shielding as well as the 360° shielded RJ45 connectors.
Standards:
IEEE 802.3; 10BaseT; 100BaseT; 1000BaseT;IEEE 802.5 16MB; ISDN; ATM; Telefon
Properties:
Sheaths / Color FRNC/LSOH (Kink protection Tera™ black /RJ45-color) / grayEMC Combination shield (PiMF + braid) / plug to EN 60603-7 with 360° shieldingChemical properties Free of hazardous substances pursuant to RoHS 2002/95/ECPackaging unit up to 3m in length: 10 units in polybag; 3.01 - 5m in length: 5 units in polybag; over 5m: packed individuallyLength key last four digits in ordering code = length of cord in dm
VoIP - Patch Cord Cat. 6A (ISO/IEC), shielded, black, 2 m CPVoIPISCSOS0020
VoIP - Patch Cord Cat. 6A (ISO/IEC), shielded, black, 3 m CPVoIPISCSOS0030
VoIP - Patch Cord Cat. 6A (ISO/IEC), shielded, black, 5 m CPVoIPISCSOS0050
VoIP - Patch Cord Cat. 6A (ISO/IEC), shielded, black, 7.5 m CPVoIPISCSOS0075
VoIP - Patch Cord Cat. 6A (ISO/IEC), shielded, black, 10 m CPVoIPISCSOS0100
www.easylan.de/en
101
Accessories
HS Color Clips for DualBoot® and FlexBoot patch cables
Color coding clips for DualBoot®-Standard, DualBoot®-PushPull and FlexBoot patch cables.
Properties:
Material plastic PAColor orange, black, gray, red, yellow, green, blue
Packaging unit 100 pcs. in polybag
Shrink tubing (printed) / Laminating labels
Self-laminating labels or printed white shrink tubes, for identifying or labeling patch cables.
Properties:
Material Polyolefin (Shrink tubing), PVC (Laminating labels)Color white (Shrink tubing) + Laminating labels
Packaging unit 1 pc.
Description Ordering codeHS Colorclip for DualBoot®-Patch Cable, orange CPZCORHS1
HS Colorclip for DualBoot®-Patch Cable, black CPZCSWHS1
HS Colorclip for DualBoot®-Patch Cable, gray CPZCGRHS1
HS Colorclip for DualBoot®-Patch Cable, red CPZCRDHS1
HS Colorclip for DualBoot®-Patch Cable, yellow CPZCYEHS1
HS Colorclip for DualBoot®-Patch Cable, green CPZCGNHS1
HS Colorclip for DualBoot®-Patch Cable, blue CPZCBLHS1
HS Colorclip for DualBoot®-Patch Cable, assortment box CPZHS7BOX
Description Ordering codeLaminating label on request
Heat shrink on request
www.easylan.de/en
Patc
h ca
ble
Cu
102
Field installable RJ45 plug Cat. 6HARTING RJ Industrial® 10G
HARTING RJ Industrial® 10G connector set, 8-poles for assembly of RJ45 system cables.
Advantages:• RJ45 Ethernet data connector suitable for industry • tool-less field installable with HARAX® quick termination in IDC technology • compact design • ergonomically unlocking clip • less weight assures shock- and vibration resisting connection • transmission category Cat. 6 • suitable for terminating solid and stranded wires
Properties:
Connector type RJ45 plug acc. to IEC 60 603-7Number of contacts 8Transmission properties Category 6 / Class EA up to 500 MHz acc. to ISO/IEC 11 801:2002, EN 50 173-1Transmission rate 10/100 Mbit/s – 1/10 Gbit/sShielding Fully shielded, 360° Screen contactInstallation field installableConductor connection via IDC contacts, no tool neededCable to be connected – Conductor cross section AWG 27 … AWG 22 (solid / stranded) – Conductor diameter max. 1.6 mm (including insulation) – Cable diameter 4.5 … 9 mmDegree of protection IP20Operating temperature range –40 °C to +70 °CHousing material Polyamide, UL94 V-0Color Black
HARTING RJ Industrial® 10G Color Coding
Set for HARTING RJ Industrial® 10G connectors.Packaging unit 100 pcs.