4 fire alarm control panels and ancillaries 4 voice alarm systems 4 hush buttons 4 automatic extinguisher panels 4 disabled refuge systems 4 EN54-4 power supplies 4 disabled persons toilet alarms 4 call systems 4 induction loop amplifiers 4 infrared staff protection systems UK TRADE PRICE LIST UK TRADE PRICE LIST UK TRADE PRICE LIST UK TRADE PRICE LIST JULY 2011 JULY 2011 JULY 2011 You You’re safe with C-TEC re safe with C-TEC You’re safe with C-TEC This price list is for UK users only. For overseas distributor/importer prices, please contact our Export dept (email: [email protected]) or European sales desk (email: [email protected])
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
YouYou’’re safe with C-TECre safe with C-TECYou’re safe with C-TEC
This price list is for UK users only. For overseas distributor/importer prices, please contact our Export dept (email: [email protected]) or European sales desk (email: [email protected])
ABOUT THIS PRICE LISTThis price list applies to all UK orders placed for delivery on or after 1st July 2011 and supersedes all previous C-TECprice lists. Prices shown are our current UK trade prices in pounds (£) Sterling. Trade discounts may apply according tothe following discount classes/order codes (contact our sales desk for details):
XFP CFP FF BF EVC AVAC NC QT
Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than £300.00 nett goodswill be charged at £8.50 (UK mainland only). Carriage charges for other areas are available on request.
An on-site delivery service is available at no extra cost. However, the nature of on-site deliveries (lack of access, etc.),means that goods often have to be signed for by someone other than your selected representative. Once a signaturehas been obtained, neither ourselves or our carrier can be held responsible for the goods. Although we willendeavour to provide proof of delivery wherever possible, no compensation can be claimed for any consequential loss.
An inspection and restocking charge of 30% will be made on returns (minimum £5.00 per consignment).
Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.
All goods supplied and services provided are subject to our current Conditions of Sale, as detailed on our AccountApplication Form (Document No. DSU2020201), copies of which are available on request. Copies of our CustomerReturns Policy (Document No. DQW1000101) are also available on request or via our website at www.c-tec.co.uk
Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but no responsibilitycan be accepted by C-TEC for any mistakes. Prices (and product specifications/guide illustrations where shown) aresubject to change without prior notice.
Our UK Sales Desk is open 8.30am to 5.00pm Monday to Friday, except for bank holidays, during our annual stocktake(normally the first two working days in May) and over our Christmas shutdown period.
Orders can be placed by telephone, fax or email using the details shown below.
2
ABOUT C-TECWhen it comes to cost-effective, expertly designed and reliableelectronic equipment - you're safe with C-TEC.All of our life safety products are manufactured using state-of-the-artproduction techniques, helping us to guarantee excellent productquality and equipment that is consistently fit for its intendedpurpose. Indeed, C-TEC is the only UK fire panel manufacturer tohave third-party product certifications and factory processapprovals from the LPCB (Loss Prevention Certification Board), BSI(British Standards Institute) and VdS.
Established in 1981 and currently trading in over 60 countriesworldwide, our commitment to quality is underlined by ourISO 9001 accreditation (held since 1994) and our corporatemembership of the FIA (Fire Industry Association).
Reliability and durability are built into our products at all stages -from conception and design at our dedicated R&D facility toconstruction, testing and despatch at our purpose-builtmanufacturing headquarters in the North West of England.
The fact many of our products are third-party certified by internationallyrecognised test and approval bodies such as the LPCB, BSI and VdS confirms tospecifiers, installers and consumers alike that they meet the design andperformance requirements of key British, European and international standards.
But it’s not just our products that set us apart from the competition, it’s our service too. The level of training and supportoffered by our knowledgeable sales and technical staff is second to none with comprehensive, practical advice readilyavailable via phone, fax or email.
Whatever your enquiry, we'll do our best to help, as quickly and efficiently as possible.
NEW PRODUCTS OVERVIEW........................................................................................................................................ 4
CONVENTIONAL FIRE ALARM EQUIPMENTCFP Standard LPCB Certified 2-8 Zone Conventional Fire Panels (to EN54-2/4) ............................................................ 5CFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .................................................................................... 5EFP Single Zone Conventional Fire Panels (to BS 5839-4)................................................................................................ 6FP 2-14 Zone Conventional Fire Panels (to BS 5839-4) .................................................................................................... 6MFP 4-28 Zone Conventional Fire Panels (to BS 5839-4) ................................................................................................ 6EP Range LPCB Certified 3 Zone Automatic Extinguisher Panel (to EN12094-1 & EN54-2/4)........................................ 7FP Automatic Extinguisher Panels .................................................................................................................................... 7Fire Alarm Ancillaries (remote LEDs, relays, device isolators, sounder extenders & ancillary equipment boxes) ...... 8EN54-4 VDS Certified Power Supplies .............................................................................................................................. 8Non-EN54-4 Power Supplies .............................................................................................................................................. 9Manual Call Points .............................................................................................................................................................. 9Series 65 (Apollo) Conventional Smoke & Heat Detectors .............................................................................................. 9Orbis (Apollo) Intrinsically Safe Smoke & Heat Detectors .............................................................................................. 9Series H (Hochiki) Conventional Smoke & Heat Detectors ............................................................................................ 10Beam Detectors ................................................................................................................................................................ 10Bells.................................................................................................................................................................................... 10 Sirens.................................................................................................................................................................................. 10Bedhead Sounders ............................................................................................................................................................ 10 Base Sounders ....................................................................................................................................................................10Strobes / Beacons .............................................................................................................................................................. 10Sounder Beacon Combinations........................................................................................................................................ 11Electro-magnetic Door Retainers .................................................................................................................................... 11Vibrating Pads .................................................................................................................................................................. 1124V VRLA Battery Packs .................................................................................................................................................. 11
2-WIRE FIRE ALARM EQUIPMENTCFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries................................................................ 12
800 SERIES CONVENTIONAL CALL SYSTEM800 Series Conventional Call System .................................................................................................................... 21/22/23
ADDRESSABLE CALL SYSTEMS / INFRARED STAFF PROTECTION SYSTEMSQuantec Addressable Call System .................................................................................................................... 24/25/26/27
INDUCTION LOOP EQUIPMENTPDA Range Induction Loop Equipment and Ancillaries............................................................................................ 28/29
DIMENSIONSKey control panel measurements / mounting details ................................................................................................30/31
A NEW RANGE OF C-TEC MANUFACTURED ADDRESSABLE SOUNDERS/BEACONS
Ideal for ensuring compliance with the visual alarm device requirements ofBS 5839 part 1 and the Equality Act, C-TEC’s new addressable sounders and beaconsare cost-effective, easy-to-install and fully-compliant with our XFP Apollo Discoveryfire panels. For part numbers and trade prices see page 16.
A NEW 20 ZONE CALL CONTROLLER FOR OUR 800 SERIES CALL SYSTEM
C-TEC is completely revitalising its flagship 800 Series conventional callsystem range. Fully backwards compatible and with a new call acknowledgefunction, our new compact 20-zone call controller (expandable to 40 zones) willbe available this Autumn, with a new range of brandable call points followinglater in the year. For further details see page 21.
A STAINLESS STEEL HUSH BUTTON
C-TEC is adding a stylish stainless steel Hush Button to its revolutionary and award-winning range of Hush Buttons. Perfect for prestigious applications, the XFP508X/SS(Apollo XP95/Discovery version) and XFP508H/SS (Hochiki ESP version) will beavailable from September 2011. For further details see page 14.
NEW-LOOK XFP & CFP FIRE PANELS
Our new-look super-enhanced XFP addressable and CFP conventional panels nowfeature stylish and easy-to-use interfaces and combined keypad/keyswitch entry asstandard. In addition, our CFP Standard conventional fire panel now has extraonboard fire and fault relays, making it even better value for money. All our XFPpanels and Standard CFP panels have also been re-certified to the latest versions ofEN54 parts 2 and 4 by the LPCB. For further details see pages 5 (CFP) and 13 (XFP).
A NEW FOUR LINE DISABLED REFUGE CONTROLLER FOR SIGTEL
A new four line master controller is now available for our popular SigTEL range ofdisabled refuge/emergency voice communication equipment. The ECU-4 is 20%cheaper than our existing eight line controller and adds additional flexibility to therange as it can be easily mixed and matched with additional ECU-4s, ECU-8s orECU-8S slave controllers to create larger systems. For further details see page 19.
NEW PRODUCTSAs usual, C-TEC’s latest price list contains a host of innovative, easy-to-install and cost-effectivenew products. Look out for our new-look super-enhanced range of XFP and CFP fire panels, a newfour line controller for our SigTEL disabled refuge system, an elegant stainless steel version of ourrevolutionary Hush Button, a new range of C-TEC manufactured addressable sounders/beaconsand a new compact 20-zone call controller for our 800 Series call system. For up-to-the-minuteinformation on all C-TEC products, subscribe to our eBulletin service at www.c-tec.co.uk
• LPCB certified to the latest versions of EN54 Parts 2 and 4*
• Re-engineered to include an improved user interface with colour-coded buttons and combined keypad/keyswitchentry to access level 2
• 2, 4 or 8 zone circuits (dependent on model purchased)
• Four conventional sounder circuits
• Integral 1.5A EN54-4/A2 switch mode PSU
• Wide range of engineering functions including zone test, coincidence*, zone delay* and non-latching zones*
• Two on-board relays (Fire and Fault)*
• Two open-collector outputs (Remote and Reset)
• ‘Class change’ and alert inputs
• Installer-friendly design accommodates easy first fix and straightforward maintenance
• Multiple indicators
• End of line units included (one per zone)
• Ancillary system expansion connections* provided for up to eight two-wire repeaters (one CFP761 network driver card required per system) and optional CFP relay boards
• Space for two x 12V 3.2Ah VRLA batteries
• Economy CFP panels (without on-board relays, system expansion connections, coincidence, zone delay or non-latching zone facilities) are also available
Features marked * not available on CFPEconomy panels
Include all CFP standard panel features except onboard relays, system expansion connections,coincidence, zone delay and non-latching zone facilities. CFP Economy panels are not LPCBcertified and are not compatible with CFP repeaters or CFP relay boards.
CFP702E-4 CFP Economy 2 zone panel £110.25 Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)
CFP704E-4 CFP Economy 4 zone panel £136.50 Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)
CFP708E-4 CFP Economy 8 zone panel, £199.50 Keypad/keyswitch entry. (Max. 2 x 3.2Ah batteries)
S-KEY Spare key for use with CFP keypad/keyswitch panels £2.00
CFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
CFP STANDARD LPCB CERTIFIED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
CFP702-4 CFP Standard 2 zone panel £124.37 Keypad/keyswitch entry. Max. 2 x 3.2Ah batteriesLPCB certified to EN54-2/4 (no. 176a)
CFP704-4 CFP Standard 4 zone panel £156.82 Keypad/keyswitch entry. Max. 2 x 3.2Ah batteriesLPCB certified to EN54-2/4 (no. 176a)
CFP708-4 CFP Standard 8 zone panel £237.93 Keypad/keyswitch entry. Max. 2 x 3.2Ah batteriesLPCB certified to EN54-2/4 (no. 176a)
CFP760 CFP 8 zone repeater panel, keypad/keyswitch entry £180.85 (Max. 2 x 3.2Ah batteries). Max 8 repeaters per system
S-KEY Spare key for use with CFP keypad/keyswitch panels £2.00
CFP761 CFP/XFP network driver card, 1 required per repeater system, fit at main £63.36
CFP763 CFP relay output card, 12 relays, as CFP762 plus 8 o/p per zone relays £66.35
CFP764 CFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone CFP) £44.23
CFP765 CFP relay output card, 4 relays (4 o/p per zone relays for a 4 zone CFP) £38.98
CFP766 CFP relay output card, 2 relays (2 o/p per zone relays for a 2 zone CFP) £33.73
BF362 Barrier interface unit (allows a CFP zone circuit to be connected to up to 10 £15.38 intrinsically safe detectors and call points via a Zener barrier, not supplied)
CFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include 2, 4 or 8 ‘AlarmSense’ zone circuits designed for use with AlarmSense call points,AlarmSense detectors & AlarmSense sounders only. See our separate listing on page 12
• Lift-off lid for easy first fix and straightforward maintenance
• Robust metal enclosure with heavy duty base connections
• Optional head removal facility (fitted as standard to MFP panels)
• Non-latching “class change” input
• Latching fire and non-latching fault outputs (via expansion loom)
• Short circuit = fire facility (selectable on a zone by zone basis for retro-installations)
• Ancillary connections for repeater panels and other system add-ons including expansion looms, fault relays, sounder extender kits, etc
• Ideal for retro-installations
FF382-2 FP2 2 zone panel, does not extend (Max. 2 x 2.3Ah batteries) £144.35
FF384-3 FP4E 4 zone economy panel, does not extend (Max. 2 x 2.3Ah batteries) £170.27
FF384-2 FP4 4 zone panel, extendable to 6 zones (Max. 2 x 3.2Ah batteries) £220.97
FF386-2 FP6 6 zone panel, does not extend (Max. 2 x 3.2Ah batteries) £259.05
FF388-3 FP8E 8 zone economy panel, does not extend (Max. 2 x 3.2Ah batteries) £297.13
FF388-2 FP8 8 zone panel, extendable to 14 zones (Max. 2 x 7.0Ah batteries) £403.88
FF390-2 FP10 10 zone panel, extendable to 14 zones (Max. 2 x 7.0Ah batteries) £441.97
FF392-2 FP12 12 zone panel, extendable to 14 zones (Max. 2 x 7.0Ah batteries) £480.04
FF394-2 FP14 14 zone panel, does not extend (Max. 2 x 7.0Ah batteries) £518.11
FF387Z-2 FP 2 zone extender pcb kit, use to extend FP panels £38.08
BF378M MINIMU miniature EOL module (for head out monitoring on EFP/FP) £8.44
BF378 Electronic Monitoring Unit (for head out monitoring on EFP/FP) £15.38
FF374FR FP fault relay module £36.46
FF374DFR FP fire relay module £36.46
FF374DT FP sounder delay module £36.46
FF374X FPX expansion loom and terminals for use with FP 2-14 zone panels £12.12
BF362 Barrier interface unit (allows an FP zone circuit to be connected to up to 10 £15.38 intrinsically safe detectors and call points via a Zener barrier, not supplied)
FF396-2 FP 10 zone repeater panel (no batteries required) £137.88
FF398-2 FP 20 zone repeater panel (no batteries required) £206.85
FP 2-14 ZONE CONVENTIONAL FIRE PANELS (TO BS 5839-4)
FF504 MFP 4 zone microprocessor panel, extendable to 12 zones (Max. 2 x 3.2Ah batteries) £254.88
FF508 MFP 8 zone microprocessor panel, extendable to 12 zones (Max. 2 x 3.2Ah batteries) £367.71
FF512 MFP 12 zone microprocessor panel, does not extend (Max. 2 x 3.2Ah batteries) £480.51
FF516 MFP 16 zone microprocessor panel, extendable to 28 zones (Max. 2 x 7.0Ah batteries) £698.39
FF520 MFP 20 zone microprocessor panel, extendable to 28 zones (Max. 2 x 7.0Ah batteries) £811.22
FF524 MFP 24 zone microprocessor panel, extendable to 28 zones (Max. 2 x 7.0Ah batteries) £924.04
FF528 MFP 28 zone microprocessor panel, does not extend (Max. 2 x 7.0Ah batteries) £1,036.86
FF501Z MFP 4 zone extender pcb kit, use to extend MFP panels £112.81
FF574X MFPX expansion loom and terminals £12.12
FF596 MFP 8 zone repeater panel, extendable to 28 zones (no batteries required) £204.17
FF596R MFP 8 zone repeater extender kit, use to extend MFP repeaters £45.81
FF596T Repeater transmitter pcb kit, one required per repeater system £183.52
BF362 Barrier interface unit (allows an MFP zone circuit to be connected to up to 10 £15.38 intrinsically safe detectors and call points via a Zener barrier, not supplied)
EP203 3 zone automatic extinguisher panel c/w 3A EN54-4 PSU £430.00 (Max. 2 x 7.0Ah batteries)LPCB certified to EN12094-1 and EN54-2/4 (no. 176c)
EP212 Output expansion relay board for EP203 £95.00 Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort
EP210F Remote status unit, flush mounting, fully-functional £135.00 c/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210F or EP210S per EP203
EP210S Remote status unit, surface mounting, fully-functional £140.00 c/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210S or EP210F per EP203
EP211 Economy status unit, single gang £83.00 c/w keyswitch operated mode (auto/manual) switch and Status LEDsMax. 8 per EP203
EP214 System line terminator, max. 2 per system (note, one is supplied with the EP203) £27.12 For terminating the EP203’s extinguishant release output to a gas release solenoid
EP215 Extinguishant hold/abort button, single gang, IP66 rated £65.00 Can be used to delay or cancel the release sequence depending on how it is connected
BF372 ‘KAC’ yellow ‘extinguishant release’ surface call point £18.40
BF372A ‘KAC’ yellow ‘abort’ surface call point £18.40
EP RANGE AUTOMATIC EXTINGUISHER PANEL (TO EN12094-1)
EP 3 ZONE AUTOMATIC EXTINGUISHER PANELS
FF383H-2 FP auto extinguisher panel (contact our Sales Desk for a list of features) £376.92
FF372/E Multi-Purpose Environmental Board ONLY £67.13
FF372/W Water sensing board ONLY (for use with FF372/E) £35.02
FF372/M Mains current sensing board ONLY (for use with FF372/E) £59.33
FP AUTOMATIC EXTINGUISHER PANELS
FP AUTOMATIC EXTINGUISHER PANELS
• A three-zone automatic extinguisher panel for areas housing expensive, dangerous or irreplaceable items of equipment
• LPCB certified to EN12094 part 1 and EN54 parts 2 & 4
• Functions as a standard three zone fire panel with extra circuitry for controlling the release of fire-suppressing gas into computer rooms, chemical plants, etc.
• 128 x 64 pixel graphical display for straightforward system programming
• Any combination of activated zones can be programmed to automatically start the panel’s release sequence
• Three conventional sounder circuits, (two x 1st stage, one x 2nd stage)
• Wide range of monitored inputs and auxiliary outputs (see schematic)
• Time-stamped event log
• Connections for up to eight remote status units with their own LCDs, manual release and mode switches
• Connections for up to eight economy status units
• Optional relay expansion boards and single gang abort and hold buttons available
An overview of the EP203’s Inputs & Outputs
EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS
Extinguisher Control Panel Instructions
Exti
ng
uis
han
tG
as
EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS
EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS
EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS
Remote Status Units(Max. 8)
Economy Status Units(Max. 8)
Input Switches
RelayBoard
DetectionZones
SounderCircuits
Fire
Local Fire
1st stage active
2nd stage active
Fault
1st
stag
e
1st
stag
e
2nd
sta
ge
1 2 3
Mo
de/
ESU
Ho
ld
Ab
ort
Rel
ease
RS4
85
Gas low pressure switch
Gas flow detection switch
Activate extinguisher solenoid
Extract fan switch
Relay Outputs
Provides reset, mode, discharged, hold and abort outputs
BF318 Remote LED indicator, supplied on a single gang plate £5.68 Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit
BF376 24V 5A relay on a plate, supplied on a single gang plate £17.18 Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices
BF367 Auxiliary device isolator, supplied on a single gang plate £23.74 Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventingautodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance
BF366 24V 5A isolatable relay on a plate c/w buzzer, supplied on a single gang plate £35.00 Combines the functions of the BF376 5A relay and BF367 device isolator in one unit
FF502P Four zone monitored sounder extender, supplied on a double gang plate £43.63 Provides four extra sounder circuits with open and closed circuit fault monitoring, two trigger inputs and one fault output
REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS, SOUNDER EXTENDERS, ETC.
A range of durable and cost-effective fire alarm ancillaries, suitable for use with virtually all makes of fire alarm panel. The range includes:-
• The BF318 remote LED indicator
• The BF376 24V 5A relay on a plate
• The BF367 auxiliary device isolator
• The BF366 isolatable 24V 5A relay on a plate
• The FF502P four zone sounder extender
A range of ancillary fire alarm equipment boxes are also available for housingbatteries, relays, timers, control switches, etc.
BF360BOX Ancillary fire alarm equipment box (external size 380x235x90mm) £41.59
BF361BOX Ancillary fire alarm equipment box (external size 465x290x103mm) £97.75
BF362BOX Ancillary fire alarm equipment box (external size 404x404x110mm) £75.00
BF360LEDKIT 6-way Status LED kit for BF360BOX £15.25
BF361LEDKIT 6-way Status LED kit for BF361BOX or BF362BOX £15.25
NCP-8 White 35mm flush mount UK single gang back box £1.90
NCP-9 White 25mm surface mount UK single gang back box £1.54
NCP-10 White 35mm flush mount UK double gang back box £2.69
NCP-11 White 25mm surface mount UK double gang back box £2.78
GENERAL PURPOSE BOXES
• A comprehensive range of EN54-4 compliant power supplies, including:-
• Five VDS/LPCB certified boxed PSUs to EN54-4/A2:2006 (as indicated) and a widerange of ‘Caged’ and ‘PCB-only’ PSUs with exactly the same electronics
• All EN54-4/A2 models offer low current consumption, a single pole volt-free fault relay and battery impedence fault reporting - see listing for standby battery requirements
BF360-24 24V 1.5A EN54-4/A2 Boxed PSU (380 x 235 x 96mm plastic enclosure) £150.00 VDS certified to EN54-4/A2 (no. G208156). Batteries: 2 x 12V. Min. 2Ah, Max. 3.4Ah
BF362-1 24V 1.5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £170.00 VDS certified to EN54-4/A2 (no. G209196). Batteries: 2 x 12V, Min. 2.5Ah, Max.19Ah
BF362-3 24V 3A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £180.00 LPCB certified to EN54-4/A2 (pending). Batteries: 2 x 12V, Min. 7Ah, Max. 12Ah
BF361-3 24V 3A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enclosure). £160.00 Designed to comply with EN54-4/A2. Batteries: 2 x 12V 7Ah
BF362-5 24V 5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal enclosure) £220.00 VDS certified to EN54-4/A2 (no. G209197). Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah
BF361-5 24V 5A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enclosure). £200.00 Designed to comply with EN54-4/A2. Batteries: 2 x 12V 7Ah
BF360-12 12V 2A EN54-4/A2 Boxed PSU (380 x 235 x 96mm plastic enclosure) £138.08 Batteries: 1 x 12V, Min. 2Ah, Max. 7Ah (without STU plate), 3.4Ah (with STU plate) VDS certified to EN54-4/A2 (no. G208155)
BF360SP Optional STU mounting plate for BF360-12 2A PSU £14.28
BF360-24/C 24V 1.5A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 2Ah, Max. 12Ah £81.00
BF362-3/C 24V 3A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 7Ah, Max 12Ah £97.62
BF362-5/C 24V 5A EN54-4/A2 Power Supply PCB. Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah £127.50
BF360-12/C 12V 2A EN54-4/A2 Power Supply PCB. Batteries: 1 x 12V, Min. 2Ah, Max. 12Ah £65.00
BF360-24/E 24V 1.5A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 2Ah, Max. 12Ah £95.00
BF362-3/E 24V 3A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 7Ah, Max. 12Ah £114.00
BF362-5/E 24V 5A EN54-4/A2 Caged Power Supply. Batteries: 2 x 12V, Min. 7Ah, Max. 18Ah £139.00
BF360-12/E 12V 2A EN54-4/A2 Caged Power Supply. Batteries: 1 x 12V, Min 2Ah, Max. 12Ah £86.00
BF368EN 24 3A EN54-4 Boxed PSU (410 x 250 x 80mm enclosure). £175.00 Designed to comply with EN54-4. Batteries: 2 x 12V, Max. 2 x 7Ah.
EN54-4 24V & 12V POWER SUPPLIES & ANCILLARIES (TO EN54-4:1997/A2:2006)
EN54-4 POWER SUPPLIES
BF365SC Sounder isolator controller, supplied on a double gang plate £105.00 BSI certified to EN54 parts 17 & 18 when used in conjunction with BF365IM modules
BF365IM Sounder isolator module (max. 35 per BF365SC) £20.34 BSI certified to EN54 parts 17 & 18 when used in conjunction with the BF365SC
BF302Z1H 55000-122 Series 65 AIR (57oC) heat detector, no base £16.60
BF302Z2H 55000-127 Series 65 BR (75oC) heat detector, no base £16.60
BF303Z1H 55000-132 Series 65 CR (90oC) heat detector, no base £16.60
BF303Z2H 55000-137 Series 65 CS (90oC) heat detector, no base £16.60
BF316ZH 55000-317 Series 65 optical smoke detector, no base £28.00
BF317ZH 55000-217 Series 65 ionisation smoke detector, no base £28.00
BF317ZH1 55000-220 Series 65 integrating ionisation smoke detector, no base £30.00
BF314ZOH ORB-OH-13001 Orbis multi-sensor, requires BF308ZO base £37.00
BF308Z 45681-200 Series 65 base £5.47
BF308ZD 45681-201 Series 65 base with diode £6.42
BF308ZR 45681-245 Series 65 base with relay £17.10
BF308ZO ORB-MB-00001 Orbis timesaver base £5.50
SERIES 65 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS
BF370FR ‘FUL’ red universal flush or surface mounting fire call point, 470Ω £10.35 (can be configured for crack glass or resettable operation)
BF371F/CX Spare glass for ‘FUL’ universal fire call point £0.63
BF370FRK/CX Test key for ‘FUL’ universal fire call point £3.15
BF370FC Protective cover for ‘FUL’ universal fire call point £3.15
MANUAL CALL POINTS (FULLEON)
FIRE ALARM ACCESSORIES
BF302Z1HIS ORB-HT-51145 Orbis grade 1 intrinsically safe heat detector, needs BF308ZIS base £60.00
BF302Z2HIS ORB-HT-51147 Orbis grade 2 intrinsically safe heat detector, needs BF308ZIS base £60.00
BF315ZHIS ORB-OH-53028 Orbis intrinsically safe multi-sensor, needs BF308ZIS base £78.87
BF316ZHIS ORB-OP-52027 Orbis intrinsically safe optical smoke detector, needs BF308ZIS base £68.57
BF308ZIS ORB-MB-50018 Orbis intrinsically safe timesaver base £15.00
ORBIS (APOLLO) INTRINSICALLY SAFE SMOKE & HEAT DETECTORS
BF375P 24V 250mA unregulated door release PSU, supplied on a double gang plate £41.33
BF375PK 24V 250mA unregulated door release PSU kit £82.00 Includes one BF375P and one BF345/1H electromagnetic door retainer
BF375M 24V 1A regulated general purpose boxed PSU (271 x 200 x 70mm enclosure) £77.96 Max. 2 x 2.3 Ah batteries.
BF377 24V 2A unregulated door release boxed PSU (405 x 267 x 92mm enclosure) £66.21
BF375PE 24V 250mA unregulated double gang door release PSU c/w detector circuit £46.35
BF375PEK 24V 250mA double gang automatic door release system £186.15 Includes 1 x BF375PE double gang door release psu c/w detector circuit, 2 x Apollo optical detectors / bases; 1 x door retainer; 1 x NCP-10 flush back box
NON-EN54 24V POWER SUPPLIES & ANCILLARIES
NON-EN54-4 POWER SUPPLIES
BF370R ‘KAC’ red surface mounting crack glass fire call point, 470Ω £8.11
BF370RF ‘KAC’ red flush mounting crack glass fire call point, 470Ω £7.14
BF370/W ‘KAC’ red IP67 Waterproof crack glass fire call point £74.97
BF371 Spare glass for ‘KAC’ crack glass fire call points £0.69
BF370MR ‘KAC’ red No Break surface mounting fire call point, 470Ω £10.28
BF370MFR ‘KAC’ red No Break flush mounting fire call point, 470Ω £8.40
BF372 ‘KAC’ yellow ‘extinguishant release’ surface call point £18.40
BF372A ‘KAC’ yellow ‘abort’ surface call point £18.40
BF370G ‘KAC’ green ‘door release’ surface call point £18.17
BF370MC Protective cover for ‘KAC’ call point (fits all indoor KAC call point variants) £3.77
BF336/W 24V polarised fire bell, weatherproof £32.91
BELLS
BF330CSR 24V red VTG fire siren c/w shallow base £17.40
BF330CSR/LPCB 24V red VTG fire siren c/w shallow base (LPCB approved) £18.57
BF330CDR 24V red VTG fire siren c/w deep base £17.40
BF330CDR/LPCB 24V red VTG fire siren c/w deep base (LPCB approved) £18.85
BF330SR 24V red polarised fire siren, internal (shallow) £22.86
BF330DR 24V red polarised fire siren, weatherproof (deep) £21.32
SIRENS
BF331CR 24V red VRS conventional bedhead sounder £16.87
BF331CR/L 24V red VRS conventional bedhead sounder, with LED £37.50
BF331CW 24V white VRS conventional bedhead sounder £16.87
BF331CW/L 24V white VRS conventional bedhead sounder, with LED £37.50
BF331R 24V red polarised bedhead sounder £18.82
BF331W 24V white polarised bedhead sounder £18.82
BEDHEAD SOUNDERS
BF332C 24V white VCT conventional base sounder £18.28
BF332C/LIDW White lid for VCT sounder £2.77
BF332 24V Squashni base ceiling sounder £22.40
BASE SOUNDERS
BF369BD Fireray 2000 12-24VDC optical beam detector, 10-100m range £512.82
BF369BD51 Fireray 5000 14-28VDC motorised beam system, 8-50m range £448.71
BF369BD1H Fireray 5000 extra detector head for use with BF369BD51 £384.60
BF369BD52 Fireray 5000 14-28VDC motorised beam system, 8-100m range £520.00
BF369BD2H Fireray 5000 extra detector head for use with BF369BD52 £489.74
BF369BD5LR Fireray 5000 long range kit £100.00
BF369BD50 Fireray 50R reflective beam detector, 50m range £414.28
BF369BD100 Fireray 100R reflective beam detector, 100m range £542.85
BEAM DETECTORS
BF340/1 24V polarised red 1W fire strobe £28.37
BF340/3 24V polarised red 3W fire strobe £32.05
BF340C/1 24V 1W xenon beacon, red lens £20.85
BF340C/2 24V 2W xenon beacon, red lens £21.14
BF340C/5 24V 5W xenon beacon, red lens £52.85
BF340CLS 24V red LED beacon, shallow base £19.57
BF340CLD 24V red LED beacon, deep base £19.85
STROBES / BEACONS
SERIES H (HOCHIKI) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302HH1 DFJ-AE/3 Hochiki 60º fixed temperature heat detector, no base £21.00 BF302HH2 DFJ-CE/3 Hochiki 90º fixed temperature heat detector, no base £21.00 BF303HH1 DCD-AE/3 Hochiki 60º combined heat & rate of rise detector, no base £21.00 BF303HH2 DCD-CE/3 Hochiki 90º combined heat & rate of rise detector, no base £21.00 BF316HH SLR-E3 S Hochiki optical smoke detector, no base £28.00 BF308H YBN-R/6 Hochiki standard detector base £4.00 BF308HD YBN-R/6SK Hochiki detector base with diode £5.66 BF308HR YBO-R/6R Hochiki detector base with latching relay £17.50 BF308HRS YBO-R/6RS Hochiki detector base with latching relay & schottky diode £19.16 BF308HRNL YBO-R/6RN Hochiki detector base with non-latching relay £31.81 AFP757 Removal tool £111.71
BC283/2 24V 1.2 AH VRLA battery pack (2 x 12V including link wire) £25.72
BC284/2 24V 2.3 AH VRLA battery pack (2 x 12V including link wire) £28.82
BC285/2 24V 3.2 AH VRLA battery pack (2 x 12V including link wire) £29.45
BC286/2 24V 7.0 AH VRLA battery pack (2 x 12V including link wire) £39.54
BC288/4 24V 10.0 AH VRLA battery pack (4 x 6V including link wires) £74.11
BC290/2 24V 17.0 AH VRLA battery pack (2 x 12V including link wires) £73.82
BC289/2 24V 24.0 AHr VRLA battery pack (2 x 12V including link wire) £130.11
24V BATTERY PACKS
BF363 24V vibrating pad c/w locking jack plug (requires 1 x BF364) £45.00 Designed for use under pillows, etc, to warn the hard of hearing of a fire condition
BF364 Single gang locking jack socket for use with BF363 £37.14 Can be connected to a standard 24V (max. 27V) fire alarm sounder circuit
VIBRATING PADS
BF345/1H ‘H’ Range 24V electromagnetic door retainer £31.00
BF345/2H ‘H’ Range 240V a.c. electromagnetic door retainer £32.35
BF345HB Floor mounting bracket for ‘H’ range door retainers £13.00
BF345C/24/500 ‘C’ Range 24V low profile door retainer, 500N, c/w keeper plate £84.14
BF345CB Floor mounting bracket for ’C’ range door retainer £7.14
CFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)
Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.
CFP702-2 CFP AlarmSense 2 zone two-wire panel, keypad/keyswitch entry £161.68 includes 2 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)
CFP704-2 CFP AlarmSense 4 zone two-wire panel, keypad/keyswitch entry £203.87 includes 4 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)
CFP708-2 CFP AlarmSense 8 zone two-wire panel, keypad/keyswitch entry £245.87 includes 8 AlarmSense zone circuits, does not extend (Max. 2 x 3.2Ah batteries)
CFP760 CFP 8 zone repeater panel, keypad/keyswitch entry £180.85 (Max. 2 x 3.2Ah batteries). Up to 8 per system.
S-KEY Spare key for use with CFP keypad/keyswitch panels £2.00
CFP761 CFP network driver card, one required per repeater system, fit at main £63.36
BF370ASS 55100-894 AlarmSense surface mounting manual call point £32.68
BF316ASHC 55000-392 AlarmSense optical smoke detector and £65.51 sounder base combination
BF316ASHIC 55000-393 AlarmSense integrating optical smoke detector £66.20 and sounder base combination
BF302ASHC 55000-196 AlarmSense standard heat detector and £62.41 sounder base combination
BF302ASHHC 55000-197 AlarmSense high temperature heat detector and £63.79 sounder base combination
BF316ASHC1 55000-394 AlarmSense optical smoke detector and £81.88 sounder beacon base combination
BF316ASHIC1 55000-395 AlarmSense integrating optical smoke detector and £82.75 sounder beacon base combination
BF302ASHC1 55000-198 AlarmSense standard heat detector and £78.01 sounder beacon base combination
BF302ASHHC1 55000-199 AlarmSense high temperature heat detector £79.73 and sounder beacon base combination
ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with CFP two-wire fire panels only
Designed to work with widely available, open protocol analogue firealarm systems, C-TEC’s award-winning innovation gives fire alarminstallers a unique opportunity to enter the rapidly expanding HMOmarketplace by utilising both conventional and analogue addressablefire alarm technology - see page 14 for further details.
HAVE YOU HEARD ABOUT OUR HUSH BUTTON FIRE ALARM SOLUTION FOR HOUSES OF MULTIPLE OCCUPATION?
• Designed to comply with EN54 parts 2 & 4
• Re-engineered to include an improved user interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2
• Available with 2, 4 or 8 AlarmSense zone circuits (dependent on model purchased)
• Four conventional sounder circuits (for use with non-AlarmSense sounders)
• Integral 1.5A EN54-4/A2 switch mode PSU
• Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones
• Two on-board relays (Fire and Fault)
• Two open-collector outputs (Remote and Reset)
• ‘Class change’ and alert inputs
• Ancillary system expansion connections for up to eight two-wire repeaters (one CFP761 network driver card required per system) and optional CFP relay boards
• Space for two x 12V 3.2Ah VRLA batteries
• General and local alarm facility on AlarmSense sounders and beacons ideal for use in houses in multiple occupation
XFP501E/X XFP Networkable single loop 16 zone panel, XP95/Discovery version £378.00 Keypad/keyswitch entry c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 3.2Ah batteries
XFP501/X XFP Networkable one loop 32 zone panel, XP95/Discovery version £552.83 Keypad/keyswitch entry c/w 3A psu, metal enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries
XFP502/X XFP Networkable two loop 32 zone panel, XP95/Discovery version £694.58 Keypad/keyswitch entry, c/w 3A psu, metal enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries
For repeaters, bezels, stainless steel enclosures, etc., see XFP ancillaries section below
XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
• LPCB certified to the latest versions of EN54 Parts 2 and 4
• Compatible with Hochiki’s ESP & Apollo’sXP95 & Discovery protocols
• Re-engineered to include an improveduser interface with colour-coded buttons and combined keypad/keyswitch entry
• Can be configured to sit on a network of up to 8 interconnected XFP main panels. (Alternatively, up to 8 XFP repeaters can be connected to a non-networked panel)
• Two independently programmable conventional sounder circuits
• Two programmable inputs, a fault output relay and 3 programmable relays
• Zone dependency (coincidence), day/night (building occupied/unoccupied) and investigation delay period functions
• Individual device sensitivity settings
• Phased evacuation facility
• 500 event monitoring
• Comprehensive test, maintenance and commissioning functions (including auto-learn loops, monitor a point, test outputs, OMT and loop continuity test)
• An intuitive Windows based upload-download PC program
• Compatible with C-TEC’s Hush Button fire alarm solution (see page 14).
• XP95/Discovery models also compatible with C-TEC manufactured addressable sounders & beacons (see page 16)
XFP 1-2 LOOP EN54 NETWORKABLE FIRE PANELS
XFP501E/H XFP Networkable single loop 16 zone panel, Hochiki ESP version £378.00 Keypad/keyswitch entry c/w 1.4A psu, plastic enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 3.2Ah batteries
XFP501/H XFP Networkable one loop 32 zone panel, Hochiki ESP version £552.83 Keypad/keyswitch entry c/w 3A psu, metal enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries
XFP502/H XFP Networkable two loop 32 zone panel, Hochiki ESP version £694.58 Keypad/keyswitch entry c/w 3A psu, metal enclosureLPCB certified to EN54-2/4 (no. 176b). Max. 2 x 7.0Ah batteries
For repeaters, bezels, stainless steel enclosures, etc., see XFP ancillaries section below
XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £16.28
BF232 RS232 to USB convertor (allows SAF7070000 to connect to a PC’s USB connector) £42.00
S-KEY Spare key for use with XFP single loop 16 zone panels £2.00
XFP ANCILLARIES (REPEATERS, NETWORK CARDS, ENCLOSURES, PRINTERS AND SOFTWARE)
NEW
PICTURE a fire panel that istouchscreen controlled, abreeze to install, provides clearand constant feedback on allaspects of fire alarm systemactivity and is fully compliantwith EN54 parts 2, 4 and 13.
Picture ENVISION - a powerful,intuitive and feature-rich range of 2 to 8 loop analogueaddressable fire panels coming soon from C-TEC.
Previewed to much acclaim at this year’s InternationalFirex exhibition, ENVISION is destined to set the fireindustry alight when it is released later this year.
13
Here’s just a taster of some of the features you can expect:-
• Three cabinet sizes - standard (2 or 4 loops), medium (2, 4, 6 or 8 loops) and large (2, 4, 6 or 8 loops)
• An intuitive 4.3 inch, 472 x 248 pixel colour resistive touchscreen
• A real time clock with automatic daylight saving mode
• A secure fault tolerant network (via a separate driver PCB)
• 64 x eight loop peer to peer panel network capacity
• Up to 10,000 programmable and indicatable system zones
• A fully filterable 20,000 event memory
• A dedicated Ethernet connection port (requires a plug on TCP/IP PCB)
• Up to 18 Ah batteries in standard cabinet, up to 38 Ah inlarger cabinets
• Attractive flush and surface mountable ‘Compact Controllers’ (pictured) for use in reception areas /emergency service access points
• An excellent pricing structure and much, much more...
COMING SOON: ENVISION FROM C-TEC
To ensure you are kept updated on ENVISION’s progress, subscribe to C-TEC’s eBulletin service at www.c-tec.co.uk
XFP508X BS5839-6 Hush Button £73.50 Apollo XP95/Discovery protocol
XFP508X/SS BS5839-6 Hush Button, stainless steel version (available Sept 2011) POA Apollo XP95/Discovery protocol
HUSH BUTTONS
HUSH BUTTON FIRE ALARM SOLUTION
HushButton
HUSH
HushButton
HUSHEOLs
EOLs
Dwelling 1
Dwelling 2
Max. 20 Hush Buttons per loop (dependent on host panel output current and devices connected)
Communal analogueaddressable fire panel
Conventional detectors and sounders wired in 2 x 2 corefire resistant screened cable (2 cores per circuit).
Alternatively, 1 x 3 core cable can be used as 0V is common. Max. cable length = 100m
2 x 2 core
2 x 2 core
Apollo XP95 or Hochiki ESP
Analogue loop
• An award-winning fire alarm solutionfor flats, apartments, houses of multiple occupation and more!
• Reduces false alarms and the likelihood of unnecessary building evacuations, system vandalism and the possibility of a true alarm signal being ignored
• Designed to sit on an Apollo or Hochikianalogue addressable loop (see right)
• Each Hush Button has its own conventionaldetector circuit, conventional sounder circuit and onboard loop isolator
• Provides each HMO dwelling with a two-minute silence facility and 15-minute isolate facility
• Fully monitored for open and short circuit faults
• Logging facilities at the main communal panel gives full traceability of any problems
• Can be operated by building occupants whilst standing at floor level
• Fully compliant with the requirements of BS 5839 part 1 and part 6 as appropriate
BF330CT Addressable Sounder Base with isolator, white (Discovery) £42.50 (Can be used as part of sounder/detector base combination - requires a separately available smoke/heat detector & base, spur wires & fixing screws provided)
BF330CTB Addressable Sounder Beacon Base with isolator, white (Discovery) £66.50 (Can be used as part of sounder/beacon/detector base combination - requires a separately available smoke/heat detector & base, spur wires & fixing screws provided)
BF330CTLIDW Optional white cap for BF330CT/BF330CTB (required for stand-alone use) £2.50
BF330CTLIDR Optional red cap for BF330CT/BF330CTB (required for stand-alone use) £2.50
BF330CTSR Addressable Wall Sounder with isolator, shallow base, red (Discovery) £51.50
BF330CTDR Addressable Wall Sounder with isolator, deep base, red (Discovery) £52.00
BF333CTSR Addressable Wall Sounder/Beacon with isolator, shallow base, red (Discovery) £71.00
BF333CTDR Addressable Wall Sounder/Beacon with isolator, deep base, red (Discovery) £71.50
BF340CTSR Addressable Wall Beacon with isolator, shallow base, red (Discovery) £42.50
BF340CTDR Addressable Wall Beacon with isolator, deep base, red (Discovery) £43.00
White C-TEC wall sounders and beacons also available - contact our sales desk for details.
C-TEC MANUFACTURED SOUNDERS & BEACONS (FOR USE WITH C-TEC’S XFP DISCOVERY FIRE PANELS)
XP95 ‘Xpander’ radio smoke and heat detection devicesBF302XPXH 11171 CS heat detector with radio base/address module £285.71
BF303XPXH 11170 A1R heat detector with radio base/address module £285.71
BF314XPXH 13032 multisensor detector with radio base/address module £328.57
BF316XPXH 12034 optical detector with radio base/address module £285.71
BF370XPX 14006 manual call point with integral radio address module £271.42
BF330XAXSR 14001 Red stand alone sounder with red radio base £371.42
BF330XAXSW 14002 White stand alone sounder with white radio base £371.42
BF333XAXR 14003 Red stand alone sounder beacon with red radio base £428.57
BF333XAXA 14004 Amber stand alone sounder beacon with white radio base £428.57
BF333XAXC 14005 Clear stand alone sounder beacon with white radio base £428.57
A low-cost, high quality modular voicealarm system purposely designed tosimplify the provision of a fully BS 5839part 8 compliant voice alarm system. Inone compact wall-mounting enclosure, theAVAC comprises:-
• A straightforward fire alarm interface that can be connected to any analogue addressable fire alarm system via a series of input/output units on the loop
• An Apollo specific interface for direct connection to an XP95 or Discovery loop
• A high-quality digital message store containing programmable Evacuate, Alert and Test messages
• A prioritised mixer
• Two x 60-Watt max. peak Class D amplifiers (plus an optional standby amp)
• An EN54-4 compliant switch mode power supply and battery charger
• Three balanced line level inputs for the (optional) connection of an emergency microphone, paging/public address equipment and a background music source
• Space for 2 x 7Ahr VRLA batteries typically providing at least 24 hours standby and 30 mins alarm running time
• A slave line level output allowing the connection of up to 26 slave AVACs
AVAC VOICE ALARM SYSTEM
VA403 Master AVAC dual 60W amplifier, charger & PSU £1,100.75 includes fire alarm interface, emergency microphone, paging and BGM connections
VA403H Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00 includes fire alarm interface, emergency microphone, paging and BGM connections
VA402 Slave AVAC dual 60W amplifier, charger & PSU £795.00 includes local paging and BGM connections
VA402H Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £930.00 includes local paging and BGM connections
AVAC AMPLIFIERS
VA421A 6” 6W ceiling speaker £40.68 c/w steel fire dome & ceramic terminal block
VA428 20W pendant loudspeaker £88.55 c/w 8m cable and internal stress wire (requires VA490 or VA492)
VA430 6W round wall/ceiling speaker in metal cabinet £37.05 c/w ceramic terminal block
VA490 Ceramic terminal block and thermal fuse assembly £4.21 (use to convert wire-end sealers to BS 5839-8, needs adaptable back box)
VA492 VA loudspeaker metal termination box £19.34 c/w 2 x ceramic terminal blocks and thermal fuses
Speakers for special applications - column, horn, sound projection, spherical suspension, etc -areavailable to order. Please contact our technical department for details.
LOUDSPEAKERS (TO BS 5839-8)
voiCe alarm systems
TOTAL CAPABILITY VA/PA SYSTEMSFrom a simple single zone alarm system in a shop unit to a school, theatre or hotel with multiple zones and many hundredsof speakers, we have the equipment and expertise to provide a compliant and cost-effective VA/PA solution.
Our AVAC, Integrity, LinX and SigNET LS voice alarm systems are installed in buildings all over the world including theatres,multi-screen cinemas, international airports, shopping centres, high rise buildings, offices, hotels, leisure centres, footballgrounds, exhibition centres, railway stations and theme parks.
Should you require any further information, our specialist VA support staff can assist with everything from project supplychain management, sales training (system design and application), engineer training (installation and commissioning) andproduct application guidance. Call our sales desk for details.
LOADMASTER Loudspeaker line tester £137.85
AVAC TESTING EQUIPMENT
VA405 FM1 Emergency microphone (1 only per system) £450.00
VA405X FMIC Emergency microphone (up to 4 only per system) £600.00
VA406 1ZDM Line level paging microphone (1 only per system) £250.00
VA406X SPE045 Line level paging microphone (up to 4 only per system) £600.00
PAZU10 SPE119 Wall-mounted 10-zone microphone switching unit with PSU £1,100.00for use with up to 8 PA105s or PA110s
Larger paging microphone consoles available to special order
MICROPHONES
CRS Custom recording session, up to 5 messages (English language, £500.00 male or female voice, neutral accent - includes message treatment, encoding etc.)
ECU-4 4 Line Master EVC controller c/w handset & display, needs 2 x 7Ah batteries £850.00
ECU-8 8 Line Master EVC controller c/w handset & display, needs 2 x 7Ah batteries £1085.00
ECU-8NT 8 Line Master EVC controller (no handset) c/w display, needs 2 x 7Ah batteries £910.00 (typically used on networked systems that do not require multiple control points)
ECU-8S 8 Line Slave EVC expansion unit (adds 8 extra lines to an ECU-4, ECU-8 or ECU-8NT) £757.00 Max. one ECU-8S per ECU-4/ECU-8/ECU-8NT, no batteries required
ECU721 Network communication card (allows up to four ECU-4, ECU-8 or ECU-8NT £105.00 controllers to be interlinked - one required per networked ECU-4, ECU-8 or ECU-8NT)
EVC423 PC programming software, configurator and mini-USB lead for ECU-4 / ECU-8 £121.17 (allows the optional programming of extension names etc via a Windows PC)
AFP385 Grey flush bezel for ECU-4/ECU-8/ECU-8NT controllers £28.99
BF359/2 Grey steel anti-tamper enclosure for ECU-4/ECU-8/ECU-8NT controllers, surface £273.00
BF359/2B Flush mounting bezel for BF359/2 enclosure £85.83
BF359/3D Stainless steel anti-tamper enclosure for ECU-4/ECU-8/ECU-8NT controllers, flush £290.00
BF359/3CL Cam lock kit for BF359/3D stainless steel enclosure £23.85
CCU-16 16 line master EVC control unit with display, wall-mounting £1142.40 Needs a separate ECU desk dial unit, LC2/LC3 line cards and 2 x 7.0Ah batteries
SCU-16 16 line slave EVC expansion unit (expands CCU-16 in 16 line multiples) £714.00 Wall-mounting, needs LC2/LC3 line cards and 2 x 7.0Ah batteriesMax. seven SCU-16 slaves per CCU-16 master (allows up to 128 lines)
LC2 2-way Line Card for Type A Fire Telephone Outstations £24.99 One card required per two Type A outstations connected to a CCU or SCU
LC3 2-way Line Card for Type B Disabled Refuge Outstations £22.14 One card required per two Type B outstations connected to a CCU or SCU
SVMM Two message card for CCU (optional) £285.60
SVMM/C Custom message card for CCU (optional) £599.00
AFP385 Grey flush bezel for CCU-16 or SCU-16 £28.99
ECU-32 32 line Desk control unit with handset and display £1,428.00
ECU-64 64 line Desk control unit with handset and display £2,142.00
ECU-128 128 line Desk control unit with handset and display £2,856.00
ECUWMB Wall Mount Bracket for ECU-32, ECU-64, ECU-128 £14.50
For outstations and accessories, please refer to the SigTEL Compact listing above
SIGTEL 16-128 LINE CONTROLLERS & DIAL UNITS
EVC301RPO Red fire telephone EVC outstation, c/w handset (push to open version) £180.00
EVC301RLK Red fire telephone EVC outstation, c/w handset (lift lock version) £180.00
T-BEZ301 Red flush bezel for EVC301RPO & EVC301RLK £14.28
FIRE TELEPHONE (TYPE A) OUTSTATIONS
EVC302GF Green handsfree EVC outstation, flush mounting £158.40
EVC302GS Green handsfree EVC outstation, surface mounting £168.80
NCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07
NCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34 (3m vinyl cord, 2 x triangles, 1 x bullet)
The NC951 can be expanded to include multi-zone indicator panels and/or additional calling devices,sounders, overdoor lights, etc. Refer to our full 800 Series listing on pages 21-23 for details.
• NC951 includes everything required for a BS 8300 clause compliant emergency assistance alarm (except cables & fixings)
• Attractive compact design blends perfectlyinto any sort of decor
• Double gang NC942B call controller features a volt-free relay output, a rotary volume control, Braille text and on-board rechargeable battery backup facility
• Remote reset point c/w sounder provides audible and visual indication of an alarm call inside the WC to reassure users help ison the way
• Simple to install 12V system - four core stranded security cable is ideal for most installations
• Ceiling pull features two open sided triangular bangles for ease of use by the infirm
• Disabled WC sticker included in all kits
• All wall-mounting plastic accessories fit 25mm backboxes. Ceiling pull is surface mountable
• Rechargeable back-up battery on NC942Bprovides up to 24 hrs stand-by and 15 minsalarm running time
• System can be easily expanded to include up to three additional 800 Series Call System devices - see pages 21-23 for further details.
• Can be used to help building managers and service providers comply with BS8300and the Equality / Disability DiscriminationAct
• NC951/SS stainless steel kit also available
NEW
SINGLE ZONE EMERGENCY ASSISTANCE ALARMS
NC951/SS Stainless steel single zone call system kit £161.70 Includes NC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light c/w sounder, NC809DB/SS s/steel reset point & NC949 Disabled WC sticker (no onboard battery backup)
NCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07
NCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34 (3m vinyl cord, 2 x triangles, 1 x bullet)
The NC951/SS can be expanded to include multi-zone indicator panels and/or additional calling devices,sounders, overdoor lights, etc. Refer to our full 800 Series listing on pages 21-23 for details.
Larger Emergency master and repeater panels available to order, add per 10 zones £150.70
800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency callsNC920F 20 Zone Master Call Controller, flush version, c/w 12V 300mA PSU £POA
Includes reset button, mute/call acknowledge button and relay (Can be extended to 40 zones using an NC920EF expansion unit)
NC920S 20 Zone Call Controller, surface version, c/w 12V 300mA PSU £POA Includes reset button, mute/call acknowledge button and relay (Can be extended to 40 zones using an NC920ES expansion unit)
NC920EF 20 Zone Expansion Unit for 20 Zone Call Controller, flush version £POA Expands NC920F Call Controller to 40 zones
NC920ES 20 Zone Expansion Unit for 20 Zone Call Controller, surface version £POA Expands NC920S Call Controller to 40 zones
BF360-12 12V 2A Boxed EN54-4 PSU, with space for 1 x 12V 7Ah standby battery £138.08 Can be optionally connected to an NC920F/NC920S to provide standby power
800 SERIES 20-40 ZONE EMERGENCY CALL CONTROLLERS - available September 2011
NEW
NEW
NEW
NEW
• Hundreds of applications - suitable for use in hotels, leisure centres, nursing homes, shops, offices, GP surgeries, factories, warehouses, restaurants and more
• 12V d.c. system - simple to install, easy to use and highly reliable - standard six core security cable ideal for most installations
• Wide range of indicator panels covering 1 to 90 zones including a new flush or surface mountable 20-40 Zone Call Controller (available September 2011)
• Extensive range of ancillaries including ceiling pulls, wall-mounting call points, monitoring points, overdoor lights, infrared ceiling receivers, remote sounders, relays and more
• Attractive compact design (most wall-mounting components fit 25mm UK single or double gang back boxes. Ceiling pulls and water resistant alert points are surface mountable)
• Two levels of call - standard (constant tone) and emergency (intermittent tone)
• No limit to system size - components can be mixed to meet the layout and call communication requirements of virtually any building
Generate standard calls onlyNC807C Ceiling pull unit, no on-board reset, no remote socket £17.12
NCP-12 Nylon ceiling pull cord accessory pack (3m nylon cord, 2 x triangles, 1 x bullet) £3.07
NCP-13 Wipe clean/anti-bacterial vinyl ceiling pull cord accessory pack £15.34 (3m vinyl cord, 2 x triangles, 1 x bullet)
NC802DB Standard call point, button reset, with remote socket £21.98
NC802DBB Standard call point with braille label, button reset, with remote socket £31.37
NC802DM Standard call point, magnetic reset, with remote socket £21.98
NC917L Standard call push with protruding button, no on-board reset, no remote socket £19.17
NC802DEWM Master IP65 water resistant alert point, mag. reset, no remote socket £91.63
NC802DEWS Slave IP65 water resistant alert point, up to 10 per master £87.32
NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £177.66
NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £105.62
800 SERIES STANDARD CALL POINTS
Generate standard calls onlyNC894DKB Isolatable monitoring point, button reset, no remote socket £31.45
NC894DKM Isolatable monitoring point, magnetic reset, no remote socket £31.45
800 SERIES STANDARD MONITORING POINTS (door contacts included)
Generate standard and/or emergency calls (as described)NC802DEB-1/2 Emergency call point, button reset, with remote socket £32.07
can generate standard and emergency callsNC802DEM Emergency call point, magnetic reset, with remote socket £32.07
can generate standard and emergency callsNC802DEWM Master water resistant alert point, IP65, mag. reset, no remote socket £91.63
can generate standard or emergency calls (not both)NC802DEWS Slave water resistant alert point, IP65, max. 10 per master £87.32
NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £177.66
NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £105.62 can generate standard or emergency calls (not both)
NC804DE Emergency call / reset point, button reset, no remote socket £29.30 can generate emergency calls only
NC809DEM Emergency call / reset point, magnetic call & magnetic reset £33.47 No remote socket, can generate emergency calls only
800 SERIES EMERGENCY CALL POINTS
NEW
Capable of indicating standard calls ONLYNC810K 10 Zone Standard master panel c/w 12V PSU & reset button £176.75
NC811K 10 Zone Standard repeater panel £149.34
NC820K 20 Zone Standard master panel c/w 12V PSU & reset button £248.68
NC821K 20 Zone Standard repeater panel £221.28
NC830K 30 Zone Standard master panel c/w 12V PSU & reset button £320.63
NC831K 30 Zone Standard repeater panel £293.21
NC840K 40 Zone Standard master panel c/w 12V PSU & reset button £448.64
NC841K 40 Zone Standard repeater panel £417.32
NC850K 50 Zone Standard master panel c/w 12V PSU & reset button £530.84
NC851K 50 Zone Standard repeater panel £499.54
NC860K 60 Zone Standard master panel c/w 12V PSU & reset button £613.05
NC861K 60 Zone Standard repeater panel £581.74
Larger Standard master and repeater panels available to order, add per 10 zones £137.03
800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS
Generate standard and/or emergency calls when triggered by a compatible infrared transmitterNC302RXC Infrared master ceiling receiver, no on-board reset, no remote socket £40.79
NC302RXCS Infrared slave ceiling receiver, up to 3 per master £31.50
NC802DERB Infrared call point, button reset, with remote socket £51.41
NC802DERM Infrared call point, magnetic reset, with remote socket £51.41
NC302RT Test infrared receiver £63.00
800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS
Can be used to reset devices which do not have an onboard reset facility NC809DB Button reset point £9.77
NC809DBB Button reset point c/w sounder and braille label £15.75
NC809DB/SS Button reset point, s/steel £48.07
NC809DM Magnetic reset point £9.77
NC899IRR Keyswitch reset point £28.35
800 SERIES RESET POINTS
For use with all magnetic call points, monitoring points and reset pointsNC803M/10 10 x magnetic reset keys £31.43
NC803M/50 50 x magnetic reset keys £148.84
800 SERIES MAGNETIC RESET KEYS
Generate standard calls via a call point’s remote socketNC805C/6 1.8m (6ft) tail call lead £11.18
NC805C/14 4.2m (14ft) tail call lead £12.57
NC805D 1.2-3.6m (4-12ft) tail call lead £17.12
NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £28.98
NC805AS Remote air switch for NC805P £44.55
NC805MD Portable movement detector £383.47
QT644 Floor pressure mat - available late 2011 £POA
NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.95
800 SERIES ANCILLARY CALLING DEVICES
NC889 Call latch module, can trigger a standard call from a n/o or n/c switch £11.27
NC889ERM Multi-purpose call latch module, can trigger a standard and/or an emergency £20.31 call from a normally open switch (includes confidence LED & on-board magnetic reset)
NC899KD Area isolator, can be used to isolate areas/zones £36.66
NC884DE Emergency 5:1 input expander, can be used to provide area/zonal indication £21.09
NC885 Standard 5:1 input expander, can be used to provide area/zonal indication £12.87
NC883D 12V relay unit, can be used to switch sirens, strobes, etc. £34.22
NC848/10 10 x anti-tamper screws £20.16
NC848/50 50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments £100.80
NC947 Anti-tamper Allen key, for use with anti-tamper screws £9.95
DP874B/4 Tone only UHF paging transmitter, supplied with one tone-only pager £554.13DP875/4 Extra tone-only pager £204.75
MISCELLANEOUS 800 SERIES DEVICES
NCP-8 White 35mm flush mount UK single gang back box £1.90
NCP-9 White 25mm surface mount UK single gang back box £1.54
NCP-10 White 35mm flush mount UK double gang back box £2.69
NCP-11 White 25mm surface mount UK double gang back box £2.78
PLASTIC BACK BOXES
Battery operated using a replaceable 12V A23/23A (8LR23) alkaline battery (supplied) NC432 Infrared neck pendant transmitter (push for call) £42.00
NC432W Infrared wrist pendant transmitter (push for call) £42.00
800 SERIES INFRARED NECK / WRIST PENDANT TRANSMITTERS
For use with infrared call points & ceiling receiversQT412RXA Infrared transmitter, push/pull for emergency call £84.00
QT412RXCA Infrared transmitter, push for standard call/pull for emergency call £84.00
QT424/1 Single-way charging unit for QT412 range transmitters £15.75
QT424/10 Ten-way charging unit for QT412 range transmitters £194.25
800 SERIES RECHARGEABLE INFRARED ‘STAFF ATTACK’ TRANSMITTERS
• A powerful yet easy-to-use addressable call system ideal for use in care homes, hospitals, GP surgeries, mental health facilities, hotels, offices, leisure centres, shops and factories
• Ideal for nursecall, dementia, staff protection, emergency assistance and affray applications
• Up to 7 call levels - standard, ensuite, help required, emergency, attack, presence & attendance
• Up to 256 monitored addressable devices per system
• Up to 40 pre-set and 45 custom place names per system (new optional ‘User ID’ function allows staff to see exactly who is calling - available on Quantec systems with infrared devices only)
• Flexible call routing - allows the system to be tailored to suit a site’s exact operational needs
• Includes a huge range of cost-effective system components including individually programmable call points, displays, ceiling pulls, overdoor lights, monitoring points, infrared transmitters and more!
• Optional Surveyor data management software allows building managers to output reports on all aspects of call system activity to a PC’s desktop
• Contact our Sales Desk for details of our free Quantec training courses or visit our website at www.c-tec.co.uk
QUANTEC ADDRESSABLE CALL SYSTEM
QT601-2 Quantec controller, one required per system £341.25 (Laptop programmable, includes space for 2 x 7.0Ah batteries)
AFP385 Flush bezel for Quantec controller £28.99
BF359/3S Stainless steel glazed enclosure for Quantec controller £280.00 requires BF359/3CL or 3SL lock kit
BF359/3CL Cam lock kit for BF359/3S £23.85
BF359/3SL Electromagnetic solenoid lock kit for BF359/3S £200.00
QT603 Quantec network splitter £21.47
QUANTEC CONTROLLERS, ENCLOSURES & INSTALLATION AIDS
Battery operated using a replaceable 12V A23/23A (8LR23) alkaline battery (supplied) For use with Quantec infrared call points, infrared ceiling receivers & Mk2 radio receivers
NEW
QT422RX Quantec Mk2 radio receiver £222.71
QT422RXEX External extension aerial for QT422RX radio receiver £194.72
QT421 RF integrity ‘monitored heartbeat’ transmitter (use at least 1 per QT422RX) £88.83
QT848/10 10 x Anti-tamper grub screws for QT302RXR/QT302RXRS, incl. allen key £2.50
QT302RT Quantec test infrared ceiling receiver £52.50
The special programming functions on the QT302RX and QT302RXR require a QT423 configurator
QUANTEC INFRARED CEILING RECEIVERS
NEW
NEW
NEW
QT630 Quantec Dementia care master control unit c/w psu (requires QT643 programming tools) £POA Designed to sit on the Quantec network. Includes inputs/timers, etc., for a wide range of dementia ancillary devices such as enuresis sensors, PIRs, bed exit mats, LED lights and more.
QT643 Programming tools for QT630 Dementia care master control unit (Windows compatible) £POA
QT631K Quantec Dementia care room status controller, keyswitch reset/isolate £POA
QT631M Quantec Dementia care room status controller, magnetic reset/isolate £POA
QT632 Quantec doorbell push (can be optionally connected to a QT631K/QT631M status controller) £POA
QT639 Quantec Dementia care super-bright 3W LED lamp MR16 £POA
QUANTEC DEMENTIA CARE MASTER CONTROL UNIT & ANCILLARIES - available late 2011
NEW
NEW
NEW
NEW
NEW
NEW
Allow external devices such as enuresis sensors, bed exit sensors, etc, to be connected to Quantec.Must be used in conjunction with a QT602/602E/609 range call point or a QT630 dementia control unit.QT636 Quantec interface unit c/w remote socket £POA
(can be configured to accept normally open or closed ancillary devices)
QT637 Quantec Enuresis/general purpose interface socket (includes two remote sockets, one £POA for a QT635 enuresis sensor & one that can accept a normally open or closed ancillary device)
QUANTEC INTERFACE UNITS - available late 2011
NEW
NEW
Can be connected directly to a QT630 dementia control unit or via a QT604/QT604M monitoringpoint or QT611 multi-purpose programmable device.
QT638 Quantec PIR movement sensor (requires a QT645 PIR power interface if £POA connecting to Quantec via a QT604, QT604M or QT611)
QT645 Quantec PIR power interface (for use with QT638 PIR movement sensor) £POA
BF874QAQ Serial display paging transmitter for alphanumeric pagers, requires BF876DQ £585.00
BF876DQ Dipole 400mHz aerial c/w BNC and 10m connection lead, 1500m range £140.00
BF877QAQ 40 character alphanumeric pocket pager £180.00
QUANTEC PRINTERS & PAGING EQUIPMENT
NEW
NEW
NEW
27
Generate calls via the remote socket on a QT602 call point or a QT636 / QT637 interface unit (as indicated).Note that QT636 / QT637 interface units (listed on page 26) are not available until late 2011.
NC805C/6 1.8m/6ft tail call (connects to a QT602 call point or a QT636/QT637 interface unit) £11.18
NC805C/14 4.2m/14ft tail call (connects to a QT602 call point or a QT636/QT637 interface unit) £12.57
NC805D 1.2-3.6m/4-12ft tail call (connects to a QT602 call point or a QT636/QT637 interface unit) £17.12
NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £28.98
NC805AS Remote air switch for NC805P (connects to a QT602 call point or a QT636/QT637 interface unit) £44.55
NC805MD Portable movement detector (connects to a QT602 call point or a QT636/QT637 interface unit) £383.47
NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £9.95
QT644 Floor pressure mat (connects to a QT602 call point or a QT636/QT637 interface unit) - available late 2011 £POA
QT633 Bed exit mat (connects to a QT636 or QT637 interface unit) - available late 2011 £POA
QT634 Chair exit mat (connects to a QT636 or QT637 interface unit) - available late 2011 £POA
QT635 Enuresis (bed wet) sensor (connects to a QT637 interface unit) - available late 2011 £POA
• The widest range of audio-frequency induction loop equipment in the UK
• Designed to meet or exceed the requirements of BS7594 and BS-EN60118 part 4 when correctly installed
• Available in a variety of cost-effective kit formats suitable for use in ticket offices, meeting rooms, lecture theatres, nursing homes, GP surgeries, churches and shops
• Allows hearing aid users to participatefully in general conversation and other social/work related activities
• No audio experience required - C-TEC’s loop systems can be fitted by any competent electrician
• New FPROK induction loop test kit includes everything you need to test an AFILS system to current British standards
• Can be used to help building managersand service providers comply with BS8300 and the Equality / Disability Discrimination Act
ML1/K ML1 counter induction loop kit £63.64 c/w ML1 wall-mounting double gang loop amplifier, AMT mic. and TX2 counter loop
PDA102C PDA102 counter induction loop kit £147.77 c/w PDA102 free-standing loop amplifier, AMT microphone and TX121 counter loop
1.5m2 COUNTER INDUCTION LOOP AMPLIFIER KITS
Provide 16m2 coverage to EN60118-4 or 50m2 coverage to BS7594 (1993)
AKU1 PDA200E 120m2 Retail unit loop kit £276.12 c/w PDA200E amplifier, AML lectern mic, APJ plate
AKW1 PDA200E 120m2 Place of worship loop kit 1 £327.60 c/w PDA200E amplifier, AML lectern mic, APJ plate, APL plate
AKW2/L PDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version) £525.63 c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, 2 x APXM plate
AKW2/H PDA200E 120m2 Place of worship loop kit 2 (handheld mic. version) £525.63 c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, 2 x APXM plate
AKH1/L PDA200E 120m2 Health and fitness club loop kit (lavalier mic. version) £487.36 c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, APL plate
AKH1/H PDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £487.36 c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, APL plate
AKM2 PDA200E lift loop kit, for elevators £346.50
Please note: Loop cable is not included in the above ‘AK’ range kits. We recommend you use 1mm2 single core cable suchas C-TEC’s LOOP2/W cable which is available in 100m reels (see page 29 for pricing details).
120m2 INDUCTION LOOP AMPLIFIERS & KITS
PL1/K1 Portable induction loop kit (supplied in a cardboard carry case) £126.00 Includes PL1 amplifier, plugtop charger and sticker.
PL1/K2 Portable induction loop kit with AFILS tester (supplied in a cardboard carry case) £381.32 Includes PL1 amplifier, plugtop charger, sticker & FPROK induction loop test kit comprisingFoSmeter-Pro test meter/loop listener, MP3 player c/w test tones and headphones.
PL1/K3 Portable induction loop kit (supplied in a robust plastic carry case) £178.82 Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.
PL1/K4 Portable induction loop kit with AFILS tester (supplied in a robust plasticcarry case) £439.36 Includes PL1 amplifier, plugtop charger, sticker & FPROK induction loop test kit comprisingFoSmeter-Pro test meter/loop listener, MP3 player c/w test tones and headphones.
PL1/EUROAD European Plug Adaptor for PL1, black, 7.5A £2.28
TEAR-P Spare ‘AFILS available’ sticker £1.55
VL1/B1 12V vehicle induction loop kit £153.12 Includes VL1 mini-12V amplifier, AL8 cigarette lighter power connector, TX2 loop, AMT mic.
VL1/B2 24V vehicle induction loop kit £257.40 Includes VL1 mini-12V amplifier, AL7 power lead, 24V to 12V DC convertor, TX2 loop, AMT mic.
APM Omni-directional plated microphone, for wall/ceiling/desk mounting £38.27 For direct connection to ML1, PDA102, PDA200E, PDA Pro-Range or an outreach chain
AMT Tie/desk microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £5.46
AMH Handheld microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £39.00
AML Lectern microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £39.00
AMLS Lectern microphone (short stemmed version of AML) £39.00
AMD Desktop microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £54.60
AMDS Desktop microphone (short stemmed version of AMD) £54.60
AMD/P Desktop microphone, push to talk £144.50
AMP Professional handheld mic. for PDA200E or APXM outreach plate, requires AXLR lead £221.36
AMR/LA Lavalier radio mic. (4 selectable frequencies) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £266.70
AMR/HA Handheld radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £266.70
PRO45 Hanging ambient microphone for PDA Pro-Range or APXM plate £198.24
PDA RANGE MICROPHONES
FPROK FosMeter-Pro Induction Loop Test Kit £320.25 Includes FosMeter-Pro Induction Loop Tester, MP3 player c/w test tones & headphonesRequires AL1, AL2, AL3 (or AL4 + AL12 adaptor) lead
RXTI2 Induction loop test receiver requires 2 x AAA batteries & walkman type headphones £61.73
AL1 3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate) £7.88
AL2 3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50) £7.88
AL3 3.5mm jack to pre-cut bare ended lead £7.88
AL4 5.35mm jack to XLRM lead £39.00
AL12 3.5mm jack to 6.35mm jack socket adaptor £1.87
INDUCTION LOOP TEST EQUIPMENT
Loop cable is included in all ML1/K, DL50/K and PDA102 range induction loop kits. For PDA200E/AK Rangekits we recommend LOOP2/W cable. For other PDA range loop amplifiers, call our technical dept. for advice.LOOP1/W 100m x 0.5mm2 single core white loop cable (for black cable order LOOP1/B) £22.75
LOOP2/W 100m x 1.0mm2 single core white loop cable (for black cable order LOOP2/B) £37.17
LOOP3/W 100m x 1.5mm2 single core white loop cable (for black cable order LOOP3/B) £53.08
LOOP4/W 100m x 2.5mm2 single core white loop cable (for black cable order LOOP4/B) £87.96
FLAT1005 100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets) £102.14
FLAT2005 100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets) £112.96
FLAT3005 100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets) £123.90
TAPE 50m white synthetic fibre tape (used to protect flat loop cable) £9.95
BELDEN/10 10m Belden 8723 four core screened cable for use with outreach plates £18.20
BELDEN/25 25m Belden 8723 four core screened cable for use with outreach plates £45.50
APT Loop connector plate (for the termination of induction loop cable) £38.27
AXLR XLR to XLR lead (used to connect AMP mic to APXM outreach plate) £12.76
LEST 100V line (i.e PA system output) to 0db (775mV line level) convertor £26.76
APPS Overspill reduction phase shifter £106.05
TEAR10 Pack of 10 self-adhesive ‘induction loop fitted’ stickers £9.57
INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES
CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM** C-TEC’s ML1, PDA102, PDA200E and PDA Pro-Range amplifiers all have Outreach connection sockets. A separate 12V PSU may be required when connecting outreach plates to other amplifiers. Plates should be wired using Belden 8723 audio cable.
APJ 3.5mm mono jack plate, for connection of AMT, AMH, AML or AMD microphones £38.27
APL Line level audio plate, for connection of APS SCART lead/other line level audio feeds £38.27
APQM 6.35mm stereo jack plate, for connection of AMR/L & AMR/H radio microphone kit £38.27
APQL 6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc £38.27
APXM XLR mic level plate, for connection of AMP microphone £38.27
APXL XLR line level plate, for connection of line level feeds from mixing desks, etc £38.27
APM Omni-directional plated microphone, for wall/ceiling/desk mounting £38.27
APXO 3 pin XLR balanced line output plate, connects an Outreach chain to 3rd-party equipment £58.80
API AFILS active indicator light £38.27
APS SCART to double phono lead (for use with APL plate) £6.25
PDA RANGE OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM