csc

10-feb-2011

Hi Friend'sI appeared in the placement procedure of the company and faced all the rounds namely.

 Aptitude Test (Written) Technical Test (Written

Essay Writing (Written)

 Communication Round

Technical Interview

HR Interview

Now all the rounds in details:

Aptitude:-

Simplification Time and distance (average speed logic)

 Sudoku(3 by 3)

Probability

Permutation and combination

English (Passage small one; fill in the blanks easy)

Technical Written:-

DBMS  C Language

 Microprocessors Basics

 Micro-controllers Basics

 Operating Systems Basics

DCS Basics

 Number Conversions (Decimal, Binary, Octal, Hexadecimal)

Essay Writing:-You have to write an essay on one of the topics and nearly 5-6 topics are provided. Just to check whether you can write efficiently in English.

Communication Round:-Question: Tell Me Something About Yourself.Just to check whether you can speak fluently in English or not (simple one).

Technical Interview:-

DBMS (Keys, Views, Normalized forms  Communication Systems (AM, FM, PM Modulation  and their combinations)

C Language (Basics) 

 HR Round: If you clear the Technical Interview you have done 99% job. In HR they just ask about your family background, any issue for shift changing Relocation. That's an easy one.

Best of Luck

Exam/Interview Date : 10-Feb-2011No of Rounds : Aptitude Test, Technical Round, GD, Location: Delhi

28 th jan 2011’

Hi FriendsI am Balaji from siddharth Institute of Engineering and Technology. I attended for CSC held at VIT , as we registered for VIT. CSC came on 28-01-2011.The placement started at 10am and they gave brief introduction about their company and benefits provided by them. At 11am they started the written exam.

  The procedure of CSC is as follows

Aptitude: (40 questions 40min)in half hour they will announce the short listed candidates for Technical writtenTechnical: (75 questions 40min) along with that we should write essay (10min)

Aptitude paper is damn easy to attempt because they will give basic questions anybody can attempt but some of the questions will very tough to attmept You people start the paper from 26-40 you can complete it in 10-15min In 1-25 questions max 10 questions can be easy and find the easy questions and attempt it first and then you may have 4-5 minutes left see the questions and make a guess on it you can easily score 30 marks...questions may be

1.3*3 Sudoku (5 questions damn easy)

2.if A(0,y)=y+1A(x,0)=xA (x,y)=A(0,A(0,y))A(0,0)=1they find A(0,3), A(1,2) you will have 5 questions which can attended damn easy

3.One geometry question they will one diagram and distance covered from A to B like that questions will be given and find the distance like questionsyou will get 2 questions some what tuff to find

4. total 75 students will be der, 25 know typing and 45 know short hand and 10 know neither typing and shorthand. find how many know both typing and shorthand

5. synonym-1,

6. 4 options will be given and will be ask to arrange the sentence.

7. one fill up with suitable word

8. 1 question from probability and 1 question from permutationthere will be two Childs for a mother. select randomly and find probability that both are girls....not sure...some what change will be der In permutation they will be 11 men and 3 women.. a committee of should be formed such that there will be 2 men and 2 women....

9. 1.6(10pow9) divide by 4.8(10pow3)Ans:30(10pow5)

 These are the questions in remember first 8 questions may be some what tough but can be answered start from the last you can easily answered the questions coming to Technical written As you already come to know that previous questions will be given....it is truth...definitely you will be given the same questions without changing the question number and options Refer the previous questions posted in the Fresher world and check the answer once searching in the goggle. you can attempt more than 65 questions. there ends the exam they will announce the short listed candidates for the next round with in half or one hour Nearly 500 students attended among them 288 cleared the aptitude  among 288 members 190 cleared the technical written These numbers will rise your anxiety that how many people had selected finally let me explain it and the next day we prepared well and went to the VIT campus and the panel members came and announced the batches per batch 10 members will be der mine was 5th batch for each batch, they will give you a topic and should be talked for 1 min just like Jam session The HR people will be cool There will be two persons one men and one women while the jam starts one will listen to your words and the other will correct your essay  we are all in the seminar hall and the panel people came and announced the names of 9 we thought that they are promoted to the next round we all shock that she told them that you can leave for day every body stranded and can't

understand what is going on finally we came to know that  they need only few people in the replacements talk they had given a number that, they will recruit in the 1:30 ratio that mean for 30 people only one will be selected all the people attended the jam section they disqualified entire batches...and they selected few members. Here ends my journey I also disqualified from my college 2 members are short listed for the Technical Interview.I am happy to tell that, he is my batch mate in the project. I came to know that from him....they will check our confidence level.asked him to write the program for prime number while he is writing he asked him to come...just they will test our confidence. then he said you are promoted to the next round take the break and come again and for the interview. If you complete the communication round( JAM) 75% you are selected...

Mainly you should be aware of the project if any done.HR round will be the cake walk, just it is for the formality.

Now total number of students attend is 500(approx)

Aptitude-288 Written-190

Finally selected - 10

It will be shock to every bodyAl The Best.

Exam/Interview Date : 28-Jan-2011No of Rounds : Aptitude Test, Technical Round.

June 2010

Hi friends, I am Dhivyaa. K.S from Ganadipathy Tulsi’s Engineering College, Vellore. Recently I had appeared for off-campus interview conducted by ANNA UNIVERSITY PLACEMENT PROGRAMME on 17th & 18th June 2010 at Sai Ram Engineering College, Chennai and am very glad to say that I got selected.  Here I would like to share my interview experience with you.

Aptitude Technical

Group Discussion

Technical HR

Personal Interview

WRITTEN TEST (MAJOR ELIMINATION TAKES PLACE, SO, CONCENTRATE MUCH ON THIS)

I. APTITUDEIn this round, they asked 40 questions in 40 minutes which includes

Two from Venn diagram, (easy)One from probability,3*3 Sudoku like below, (very easy)8 29

You have to fill the numbers from 1-9 in the boxes, such that it should have 15 from top to bottom and across the diagonal, then you would have the box as like the one below:8 2 51 4 76 9 3

From this you might have questions like, summing up the numbers which are right and left to the number 2. For us, three questions were asked from this:

Some four questions were asked from the four different passages. One problem based on age. (easy)

Three questions based on Speed and Distance.

One from permutation

Percentage ( easy )

Few questions based on functions. (very easy one)

II. TECHNICAL It consists of 75 questions and duration is 40 minutes. We had the questions from previous year papers.

1. ------- is associated with web services. a) WSDL     b) WML     c) web sphere     d) web logic Ans: a

2.any large single block of data stored in a database, such as a picture or sound file, which does not include record fields, and cannot be directly searched by the database’s search engine.a) TABLE     b) BLOB     c) VIEW    

d) SCHEME Ans: b

3.A reserved area of the immediate access memory used to increase the running speed of the computer program. a) session memory b) bubble memory c) cache memory d) shared memory Ans: c

4.a small subnet that sit between a trusted internal network and an untruster external network, such as the public internet.a) LAN b) MAN c) WAN d) DMZ Ans: d

5.technologies that use radio waves to automatically identify people or objects,which is very similar to the barcode identification systems,seen in retail stores everyday.a) BLUETOOTH b) RADAR c) RSA SECURE ID d) RFID Ans: d

6.main(){float fl = 10.5;double dbl = 10.5if(fl ==dbl)printf(“UNITED WE STAND”);elseprintf(“DIVIDE AND RULE”)}

What is the output?a) compilation error b) UNITED WE STAND c) DIVIDE AND RULE d) Linkage error.Ans: c

7.main(){static int ivar = 5;printf(“%d”,ivar--);

if(ivar)main();}

What is the output?a)1 2 3 4 5 b) 5 4 3 2 1 c)5 d) Compiler error:main cannot be recursive function.Ans: b

8.main(){extern int iExtern;iExtern = 20;printf(“%d”,iExtern);}

What is the output?a)2 b) 20 c) compile error d) linker error Ans: d

9..#define clrscr() 100main(){clrscr();printf(“%d\n\t”, clrscr());}

What is the output?a)100 b)10 c)compiler errord)linkage errorAns: a

10.main(){void vpointer;char cHar = ‘g’, *cHarpointer = “GOOGLE”;int j = 40;vpointer = &cHar;printf(“%c”,*(char*)vpointer);vpointer = &j;printf(“%d”,*(int *)vpointer);vpointer = cHarpointer;

printf(“%s”,(char*)vpointer +3);}

What is the output?a) g40GLE b) g40GOOGLE c) g0GLE d) g4GOOAns: a

11.#define FALSE -1#define TRUE 1 #define NULL 0main() {if(NULL)puts(“NULL”);else if(FALSE)puts(“TRUE”);elseputs(“FALSE”);}

What is the output?a) NULL b) TRUE c) FALSE d)0 Ans: b

12.main() {int i =5,j= 6, z;printf(“%d”,i+++j);}

What is the output?a)13 b)12 c)11 d) Compiler errorAns: c

13.main() {int i ;i = accumulator();printf(“%d”,i);}

accumulator(){_AX =1000}

What is output?a)1 b)10 c)100 d)1000Ans: d

14.main() {int i =0;while(+(+i--)!= 0)i- = i++;printf(“%d”,i);}

What is the output?a) -1 b) 0 c) 1 d) Will go in an infinite loopAns: a

15.main(){int i =3;for(; i++=0;)printf((“%d”,i);}

What is the output?a) 1b) 2c) 1 2 3d) Compiler error : L value required.Ans: d

16. main(){int i = 10, j =20;j = i ,j?(i,j)?i :j:j;printf(“%d%d”,i,j);}

What is the output?a) 20 20

b) 20 10 c) 10 20 d) 10 10Ans: d

17.main(){extern i;printf(“%d\t”,i);{int i =20;printf(“%d\t”,i);}}

What is the output?a) “Extern valueof i “ 20 b) Externvalue of i”c) 20d) linker Error: unresolved external symbol iAns: d

18.int DIMension(int array[]){return sizeof(array/sizeof(int);}main(){int arr[10];printf(“Array dimension is %d”,DIMension(arr));}

What is output?a) array dimension is 10 b) array dimension is 1 c) array dimension is 2 d) array dimension is 5Ans: b

19. main(){void swap();int x = 45, y = 15;swap(&x,&y);printf(“x = %d y=%d”x,y);}void swap(int *a, int *b){*a^=*b, *b^=*a, *a^ = *b;

What is the output?a) x = 15, y =45 b) x =15, y =15

c) x =45 ,y =15 d) x =45 y = 45Ans: a

20.main(){int i =257;int *iptr =&i;printf(“%d%d”,*((char*)iptr),*((char *)iptr+1));}

What is output?a)1, 257 b)257 1c)0 0d)1 1Ans: d

21.main(){int i =300;char *ptr = &i;*++ptr=2;printf(“%d”,i);}

What is output?a) 556 b) 300 c) 2 d) 302Ans: a

22.#includemain(){char *str =”yahoo”;char *ptr =str;char least =127;while(*ptr++)least = (*ptrprintf(“%d”,least);}

What is the output?a) 0 b)127 c) yahoo d) yAns: a

23.Declare an array of M pointers to functions returing pointers to functions returing pointers to characters.a) (*ptr[M]()(char*(*)()); b) (char*(*)())(*ptr[M])() c) (char*(*)(*ptr[M]())(*ptr[M]() d) (char*(*)(char*()))(*ptr[M])();

24.void main(){int I =10, j=2;int *ip = &I ,*jp =&j;int k = *ip/*jp;printf(“%d”,k);}

What is the output?a) 2 b) 5 c) 10 d) compile error:unexpected end of file in comment started in line 4Ans: d

25.main(){char a[4] =”GOOGLE”;printf(“%s”,a);}

What is the output?a) 2 b) GOOGLE c) compile error: yoo mant initializers d) linkage error.Ans: c

26.For 1MB memory, the number of address lines requireda) 12 b) 16 c) 20 d) 32Ans: 16

27.There is a circuit using 3 nand gates with 2 inputes and 1 output,f ind the output.a) AND b) OR c) XOR d) NANDAns: b (not sure)

28. What is done for push operationa) SP is incremented and then the value is stored.b) PC is incremented and then the value is stored.c) PC is decremented and then the value is stored.d) SP is decremented and then the value is stored.Ans: d

29.Memory allocation of variables declared in a program is:a) Allocated in RAMb) Allocated in ROMc) Allocated in stackd) Assigned in registers.Ans: c

30.What action is taken when the processer under execution is interrupted by TRAP in 8085MPU?a) Processor serves the interrupt request after completing the execution of the current instruction.b) processer serves the interrupt request after completing the current task.c) processor serves the interrupt immediately.d) processor serving the interrupt request depent deprnds upon the priority of the current task under execution.Ans: a

31.purpose of PC (program counter)in a microprocessor is:a) To store address of TOS(top of stack)b) To store address of next instructions to be executedc) count the number of instructionsd) to store the base address of the stack.Ans: b

32.conditional results after execution of an instruction in a microprocess is stored ina) register b) accumulator c) flag register d) flag register part of PSW (program status word)Ans: c

33.The OR gate can be converted to the NAND function by adding----gate(s)to the input of the OR gate.a) NOT b) AND c) NOR d) XORAns: a

34. In 8051 microcontroller , has a dual function.a) port 3 b) port 2 c) port 1 d) port 0Ans: b

35.An 8085 based microprocessor with 2MHz clock frequency,will execute the following chunk of code with how much delay?MVI B,38HHAPPY: MVI C, FFHSADDY: DCR CJNZ SADDYDCR BJNC HAPPY

a) 102.3 b)114.5 c)100.5 d)120

36.In 8085 MPU what will be the status of the flag after the execution of the following chunk of code.MVI B,FFHMOV A,BCMAHLTa) S = 1, Z = 0, CY = 1 b) S = 0, Z = 1, CY = 0 c) S = 1, Z = 0, CY = 0 d) S = 1, Z = 1 ,CY = 1

37.A positive going pulse which is always generated when 8085 MPU begins the machine cycle.a) RD b) ALE address latch enable…c) WR d) HOLDAns: b

38.when a ----- instruction of 8085 MPU is fetched , its second and third bytes are placed in the W and Z registers.a) JMP b) STA c) CALL d) XCHGAns: c

39.what is defined as one subdivision of the operation performed in one clock period.a) T- State b) Instruction Cycle c) Machine Cycle d) All of the above Ans: a

40.At the end of the following code, what is the status of the flags.LXI B, AEC4HMOV A,CADD HLT a) S = 1, CY = 0, P = 0 , AC = 1 b) S =0 , CY = 1, P = 0,AC = 1 c) S = 0, CY = 1, P = 0 , AC = 1 d) S = 0, CY = 1, P = 1 , AC = 1

41.In 8051 micro controller what is the HEX number in the accumulator after the execution of the following code.MOV A,#0A5HCLR CRRC ARRC ARL ARL ASWAP Aa)A6 b)6A c)95 d)A5.Ans: a

42.The Pentium processor requires ------------ volts.a)9 b)12 c)5 d)24ans; c

43. The data bus on the Celeron processor is-------bits wide.a)64 b)32 c)16 d)128. Ans: a

44.K6 processora) Hitachi b) toshiba c) zilog d) AMD. Ans: d

45. What is the control word for 8255 PPI,in BSR mode to set bit PC3.a)0EH b)0FH c)07H d)06H. ans:c

46.The repeated execution of a loop of code while waiting for an event to occur is called

---------.The cpu is not engaged in any real productive activity during this period,and the process doesn’t progress towards completion.a) dead lock b) busy waiting c) trap door d) none.Ans: b

47. Transparent DBMS is defined asa) A DBMS in which there are no program or user access languages. b) A DBMS which has no cross file capabilities but is user friendly and provides user interface management. c) A DBMS which keeps its physical structure hidden from user d) none.Ans: c

48.Either all actions are carried out or none are. users should not have to worry about the effect of incomplete transctions.DBMS ensures this by undoing the actions of incomplete transctions.this property is known asa) Aggregation b) atomicity c) association d) data integrity.ans : B…

49.------ algorithms determines where in available to load a program. common methods are first fit,next fit,best fit.--------- algorithm are used when memory is full , and one process (or part of a process) needs to be swaped out to accommodate a new program.The ------------- algorithm determines which are the partions to be swaped out.a) placement, placement, replacementb) replacement, placement, placementc) replacement, placement, replacementd) placement, replacement, replacement Ans: D

50.Trap door is a secret undocumented entry point into a program used to grant access without normal methods of access authentication. A trap is a software interrupt,usually the result of an error condition.a)true b)false.Ans: A

51. Given a binary search tree,print out the nodes of the tree according t5o post order traversal. 4/ \2 5/ \1 3a)3,2,1,5,4. b)1,2,3,4,5. c)1,3,2,5,4. d)5,3,1,2,4. Ans: C

52.which one of the following is the recursive travel technique.a)depth first search b)preorder c)breadth first search d)none.

53.which of the following needs the requirement to be a binary search tree.a) 5/ \

2 7/1

b) 5/ \6 7

c) 5/ \2 7/\1 6

d) none.

54.in recursive implementations which of the following is true for saving the state of the stepsa) as full state on the stackb) as reversible action on the stackc) both a and bd) none

55.which of the following involves context switcha)previliged instructionb)floating point exceptionc)system callsd)alle)noneans : c

56.piggy backing is a technique fora)acknowledgeb)sequencec)flow controld)retransmissionans:A

57. a functional dependency XY is ___________dependency if removal of any attribute A from X means that the dependency does not hold any morea)full functionalb) multi valuedc)single valuedd)noneans : a

58)a relation schema R is in BCNF if it is in ___________and satisfies an additional constraints that for every functional dependency XY,X must be a candidate keya)1 NFb)2 NFc)3 NFd)5 NF

59) a _________sub query can be easily identified if it contains any references to the parent sub query columns in the _________ clauseA) correlated ,WHEREb) nested ,SELECTc) correlated,SELECTd) none

60) hybrid devise that combines the features of both bridge and router is known asa)router b)bridge c)hub d)brouter

61) which of the following is the most crucial phase of SDLCa)testing b)code generation c) analysys and design d)implementationAns: c

62)to send a data packet using datagram ,connection will be establisheda)no connection is requiredb) connection is not established before data transmissionc)before data transmissiond)none Ans: c

63)a software that allows a personal computer to pretend as as computer terminal isa) terminal adapterb)terminal emulationc)modemd)none Ans: b

64) super key isa) same as primary keyb) primary key and attributec) same as foreign keyd) foreign key and attributeAns: b

65.In binary search tree which traversal is used for ascending order valuesa) Inorder b)preorder c)post order d)noneAns: a

66.You are creating an index on ROLLNO colume in the STUDENT table.which statement will you use?a) CREATE INDEX roll_idx ON student, rollno; b) CREATE INDEX roll_idx FOR student, rollno;c) CREATE INDEX roll_idx ON student( rollno);d) CREATE INDEX roll_idx INDEX ON student (rollno);Ans: c

67.A________class is a class that represents a data structure that stores a number of data objectsa. container b.component c.base d.derivedAns: a

68.Which one of the following phases belongs to the compiler Back-end.a. Lexical Analysis b.Syntax Analysis c. Optimization d.Intermediate Representation.Ans: c

69.Every context _sensitive language is context_freea. true b.falseAns: b

70.Input:A is non-empty list of numbers LXß-infinityFor each item in the list L,doIf the item>x,thenXß the itemReturn XX represents:-a)largest numberb)smallest numberc)smallest negative numberd) none

71.Let A and B be nodes of a heap,such that B is a child of A. the heap must then satisfy the following conditionsa)key(A)>=key(B)b)key(A)c)key(A)=key(B)d)none

72.String ,List,Stack,queue are examples of___________a)primitive data typeb)simple data typec)Abstract data typed)noneAns: c

73.which of the following is not true for LinkedLists?a)The simplest kind of linked list is a single linked list ,which has one link per node .this link points to the next node in the list,or to a null value or emptylist if it is the last node.b)a more sophisticated kind of linked list is a double linkedlist or two way linkedlist .Each node has two links ,one to the previous node and one to the next node.c) in a circleLinkedList ,the first and last nodes are linked together.this can be done only for double linked list.d) to traverse a circular linkedlist ,u begin at any node and follow the list in either direction until u return to the original node.Ans: c

74.sentinel node at the beginning and /or at the end of the linkedlist is not used to store the dataa) trueb) false Ans:a

2. GROUP DISCUSSION

CSC is mainly looking in your communication and how well you are confident at. These guys are giving chance to everyone in putting their own points. i.e., they are conducting it in orderly fashion. She gave us: Should sex education be included in academic of school children. I was the first to start the GD, so, I went with the topic and No time was given to prepare. Results were immediately announced. In my batch, only one got eliminated. So guys, be confident while putting your points.

3. TECHNICAL HRInitially the HR was started with my project, I explained my project entirely. And he raised few questions from that. I answered for all those. So, you must have thorough knowledge of your project you had done.

Besides, he raised questions like difference between array and Linked list then Stack, Queue from Data Structures, DBMS, and Operator Overloading, paging concept from Operating System, few concepts from Mobile Computing and some more. It took some 25-30 minutes for me.Depending on the panel, you will get questions. You brush up all the concepts from Data Structure, DBMS, Operating System and Programming Languages. If you are belonging to ECE, concentrate much on Microprocessor. (This info was given by my friend).You just give your answers if you are sure, otherwise, you say, sorry mam/sir, at present, I could not recollect. Do not try to give related or fake answers.

4. PERSONAL INTERVIEWOnce you get into this round, you can stay relaxed.  He asked me the general questions like,

Tell me about yourself: I said my name, college, and aggregate, achievements (Paper presentation, Organized Women’s

day, Basket ball). He was really impressed and asked me how did u celebrate women’s day? Then I explained that too.

Why should I hire you?I said, I think I do have all the qualities to perform a job in a better way.He asked what the qualities are.Then I replied with sincerity, dedication, and commitment towards the work.

What do you know about CSC?I was busy preparing for technical and I could not go through the website, but, before that interview my friend said few points about it.While I saying so, he asked me how do you get this information? (I don’t know whether my friend said the same thing before.)But, I do not like to lie, so I said him, I gathered from my friends. Once you get info about recruiting process, you please go through that company website.

Then he asked whether you are comfort when you are relocated to different locations and night shifts, I confidently said, Yes sir.

At last he asked me to wait till 4 p.m by the next day. My interview started on 17th June nearly at 9.30 a.m and I had completed my HR at 9.30 p.m. I was waiting the whole day on 18th June for results and my name was announced at 9.30 p.m. It was the most wonderful experience.

Guys be honest, confident and success will be yours. GOOD LUCK…!!!!!!!!! SEE YOU AT CSC…!!!!!!!

Exam/Interview Date : 17-Jun-2010No of Rounds : Aptitude Test, Technical Round-1, Technical Round-2, Group Discussion - GD, Client/Manager InterviewLocation : ChennaiContributor Name : Dhivyaa K S

July 2010

1. Written test2. Technical written

3. Communication Evaluation (Written)

4. Communication Evaluation(Verbal)

5. Technical Interview

6. HR Interview

1 First 3 Rounds in succession one after another. Aptitude was simple (RS Aggarwal will do).

2 Technical written : ( Questions from Networks, C,C++ (Output), Data Structure, DBMS, Microprocessor

3 Communication Evaluation (Written) Essay Writing

4 Communication most important round evaluation (Verbal) Extempore, Sometimes GD, Tell about room, educational system, team work in animals. Hobbies based question.

5th Technical Projects : Few DBMS Questions.

6th HR (Tough One) Elimination possible.

Exam/Interview Date : 07-Jul-2010No of Rounds : Aptitude TestLocation : DelhiContributor Name : Sam