Cs531 d cs533d cp533d inglés

CS-531DCS-533DCP-533DVibratory SoilCompactors

Operating WeightCS-531D 9410 kg 20,702 lbCS-533D 9720 kg 21,384 lbCP-533D 10 010 kg 22,022 lb

Centrifugal ForceHigh 266 kN 60,000 lbLow 133 kN 30,000 lb

Cat® 3116T Turbo-charged Diesel EngineGross Power 108 kW 145 hp

Compaction Width 2134 mm 84"

2

Reliability, Serviceability and Comfort in a Durable Package The CS-531D, CS-533D and CP-533D Soil Compactors have been designed to offerenhanced production capabilities, simplified service and exceptional operator comfort.

EngineCat 3116T Turbo-charged DieselEngine delivers 108 kW (145 hp) and isbuilt for performance and reliabilitywithout sacrificing fuel economy. Page 4

Dual Propel Pumps (Models CS-533D and CP-533D)The exclusive dual pump propel systemprovides a separate balanced flow toboth the rear drive axle and the frontdrum drive motor. This system enablesthe operator to achieve superiorgradeability and maintain machinecontrol while compacting on a grade.Dual pumps also minimize drum andwheel spin-out in loose underfootconditions.Page 4

Based upon the industry-proven reputationof the Caterpillar C-Series Soil Compactors,the new D-Series establishes new standardsfor productivity, comfort and serviceabilityin the soil compaction industry.

Setting industry standards... again.

3

Operator’s Station Based on the successful Cat® G-SeriesWheel Loader operator’s station, the D-Series Soil Compactors featureexcellent operator comfort andvisibility. A tilting steering column,propel lever wrist rest, grouped controlgauges and conveniently located controlswitches enhance operator productivityand reduce fatigue. Four heavy-dutyisolation mounts provide a smooth ride.Page 6

Vibratory SystemPod-style weight housings ensure peakvibratory performance and minimalservice. Pods are replaceable andfeature bearing lubrication changeintervals of 3 years/3,000 hours.Page 5

Leveling BladeThe optional leveling blade providesincreased utilization opportunities totackle numerous backfilling, levelingand light dozing applications. Availablefor the CS-533D and CP-533D.Page 6

ServiceabilitySimple ground level access to all dailymaintenance points and the fuel fillthrough a convenient side access door.The new rearward tilting one-piecefiberglass hood allows complete engineaccess. The operator’s station tiltsforward to provides access to thehydraulic pumps.Page 7

CabThe cab option on the D-Series SoilCompactors is engineered to providethe operator unparalleled viewing areaand comfort.Page 6

4

Caterpillar® 3116T EngineIndustry-proven Caterpillar technology designed to provide unmatched performance,reliability and fuel economy.

Dual Pump Propel System (Models CS-533D and CP-533D)Superior tractive effort and gradeability for outstanding productivity in demandingenvironments.

Turbo-charged for top performance andefficiency especially at high altitudes—up to 2500 meters (8,200') withoutderating.

Unit injector system providesindividually metered high-pressure,direct-injection of fuel for maximumefficiency and low emissions.

High displacement-to-power ratioensures long life and exceptionalreliability.

Large oil cooler reduces oil deteriorationand varnishing of internal parts.

Low-mounted oil pump for quickerstart-up lubrication.

Dual fuel filters and water separatoroffer superior protection for the unitinjection system.

Dual propel pumps (Models CS-533Dand CP-533D) provide separate,balanced flow to the rear wheel axleand the drum drive motors to helpprevent spin-out in soft material;improves gradeability.

Truetrac® limited slip differentialprovides balanced tractive effort to bothrear wheels. (Standard on the CS-531Dand optional on the CS-533D and CP-533D).

Two speed ranges for versatileoperation. Low speed range forvibratory operation and maximumtorque when grade climbing. Highspeed range moves machine quicklyover longer distances.

Flushing valves in each propel circuithelps keep hydraulic oil cool and clean.

High travel speed up to 13,2 km/hr (8.1 mph).

1 Dual Propel Pumps2 Caterpillar 3116T Engine3 Truetrac® Differential4 Rear Wheel Drive Motor5 Drum Drive Motor

1 Unit-type Direct Injection Fuel System2 Double Iron Ring Band Piston Design3 Oscillating Roller Cam Follower4 High Capacity Oil Cooler5 Low Mounted Oil Pump

b

c

d

e

f

bc

d

e

f

5

Vibratory SystemAn advanced pod-style system delivers superior compactive force while offeringserviceability advantages.

Pod-style weight housings areassembled and sealed at the factory toensure cleanliness, longer bearing lifeand easier field exchange or servicewith Cat reman components.

Dual amplitude works efficiently in awider range of applications. Changeablefrom the operator’s station.

Frequency increased to 31,9 Hz (1,914vpm) for maximum compaction results.

Larger heavy-duty bearings for theeccentric weight shaft allow higherfrequency for greater force.

3 year/3,000 hour vibratory bearing lubeservice interval for reduced maintenance.

Improved isolation mounts allow moreforce to be transmitted to the groundand less vibration to the operator.

Patented Eccentric WeightsReliable dual amplitude selection and innovative design ensure precise performance.

Simplified control from the operator’sstation with a selection switch on theoperator’s console.

Positive amplitude selection isaccomplished when the spherical steelshot is repositioned inside the holloweccentric weight. Direction of weightshaft rotation determines amplitude.

Improved reliability no chance of shotwedging together. System reliability issuperior to swinging mechanicalweights.

Longer service life no heavy weights toslam together, no metal fragments tocontaminate the bearing system.

High Amplitude Low Amplitude

1 Pod-style Weight Housings2 Patented Eccentric Weights3 Heavy-duty Bearings4 Isolation Mounts

b

c

de

6

Operator’s StationErgonomically designed for maximum operator productivity. Optional cab offers excellentvisibility and unmatched comfort.

Single lever control for propel andvibratory On/Off provides simple andlow effort operation.

Padded adjustable wrist rest helpsreduce operator fatigue.

Steering console and operationalgauges are infinitely adjustable withinthe tilt range to the desired position ofthe operator. Entire console tilts forsimple entrance and exit.

Exceptional visibility to the drum, reartires and the rear of the machine due tothe sloped engine hood.

Comfortable and durable suspensionseat option is fully adjustable with flip-up arm rests and 76 mm (3") wideretractable seat belt.

Isolated operator’s station with fourheavy-duty rubber mounts reduce machinevibration transmitted to the operator.

Padded Drum and Leveling BladeIncreased versatility and utilization can be achieved with the optional leveling blade or padfoot shell kit.

Tapered pad design reduces fluffing ofsoil at top of lift.

Pad face surface area and depth arecalculated to provide optimum contactand compaction force.

Chevron pattern concentrates fullcompactive effort on two and a half padsat a time for maximum compaction.

Independently adjustable scraper teethset for bi-directional operation. Can bepositioned and replaced individually.

Single lever blade control providessimple operation for leveling,backfilling and light dozing applications.

Blade width of 2,43 m (8') providessimple transport with no need for specialpermits. Blade cut depth of 76 mm (3")combined with the high tractive effortincreases blade usefulness. (Availablefor models CS-533D and CP-533D).

7

ServiceabilitySimplified service access, extended service intervals and convenient daily inspection areaminimizes maintenance time and increases work time.

Convenient ground level service doorallows access to all daily maintenancechecks and fuel fill.

Visual indicators for the hydraulic oiltank and filter, air restriction indicatorand radiator.

One piece fiberglass hood tilts rearwardwith an electric actuator for completeaccess to the engine and cooling system.

Operator’s station tilts forward to allowconvenient access to the hydraulicpumps.

Sealed-for-life bearings in thearticulation hitch never need to begreased.

3 year/3,000 hour vibratory bearing lubeservice interval for reduced maintenance.

Quick connect hydraulic test portssimplify system diagnostics.

Electrical wiring is color-coded andnumbered to simplified troubleshooting.

Nylon braided wrap and all-weatherconnectors ensure electrical systemintegrity.

Maintenance-free Caterpillar batteriesare protected by bolt-on covers in therear of the machine on either side.Caterpillar batteries are specificallydesigned for maximum cranking powerand protection against vibration.

Scheduled Oil Sampling (S•O•S) portsallow for simple fluid collection.

Factory Reman parts are a cost-effectiveand reliable solution to keep yourmachines productive. Caterpillar offersa large choice of Reman components,including vibratory drum pods.

The fuel fill, engine oil dip stick,hydraulic tank site gauge, airrestriction indicator, radiator level sitegauge and electrical disconnect are allaccessible for easy daily service fromthe lockable ground level service door.

8 CS-531D, CS-533D and CP-533D specifications

Four-stroke cycle, six cylinderCaterpillar® 3116T Turbo-charged lowemissions diesel engine.

Ratings at RPM kW hpGross power 2200 108 145Net power 2200 103 138

Ratings of Caterpillar machine enginesare based on standard air conditions of25°C (77°F) and 99 kPa (29.32" Hg) drybarometer. Power is based on using 35°API gravity fuel having an LHV of42,780 kJ/kg (18,390 Btu/lb) when usedat 30°C (86°F) [ref. a fuel density of838.9 g/L (7.001 lb/U.S. gal)]. Netpower advertised is the power availableat the flywheel when the engine isequipped with fan, air cleaner, mufflerand alternator. No derating required upto 2500 m (8,200') altitude.

The following ratings apply at 2200RPM when tested under the specifiedstandard conditions:Net Power kW hp PsCaterpillar 103 138EEC80/1269 103 138ISO 9249 103 138ISO 3046 103 138SAE J1349 JAN90 103 138DIN 70020 142

DimensionsBore 105 mm 4.13"Stroke 127 mm 5"Displacement 6,6 L 403 cu. in.

Dual-element, dry-type air cleaner withvisual restriction indicator.

Engine ElectricalThe 24-volt electrical system consists oftwo maintenance-free Cat batteries,color-coded and numbered wiringwrapped in nylon braid. The startingsystem provides 750 cold crankingamps (cca). The system includes a 55-amp alternator.

Vibratory System SpecificationsDrum diameter (over drum)

CS-531D/CS-533D 1524 mm 60"CP-533D 1295 mm 51"

Drum diameter (over pads) CP-533D 1549 mm 61"Drum width 2134 mm 84"Drum shell thickness

CP-533D 25 mm 1"CS-531D/CS-533D 30 mm 1.2"

Pads (CP-533D only)Number of pads 140Pad height 127 mm 5"Pad face area 8942 mm sq 13.86 in sqNumber of chevrons 14

Eccentric weight drive Hydrostatic driveFrequency 31,9 Hz 1,914 vpm

Nominal AmplitudeHigh 1,70 mm .067"Low 0,85 mm .033"

Centrifugal Force @ 31,9 Hz (1,914 vpm)Maximum 266 kN 60,000 lbMinimum 133 kN 30,000 lb

Weight at DrumCS-531D 5410 kg 11,902 lbCS-533D 5625 kg 12,375 lbCP-533D 5840 kg 12,870 lb

Static CentrifugalPLI (CS-531D) 25.4 kg/cm 142 lb/in 127.5 kg/cm 714 lb/inPLI (CS-533D) 26.4 kg/cm 147 lb/in 127.5 kg/cm 714 lb/inPSI (CP-533D) 26.1 kg/cm2 371 lb/in2 122.0 kg/cm2 1732 lb/in

InstrumentationAlternator Light, Hour Meter, FuelGauge, Horn, Audible Warning Hornfor the: Engine Oil Pressure Light,Engine Water Temperature Light,Hydraulic Oil Temperature Light, LowCharge Pressure Light.

Service Refill CapacitiesLiters U.S.

GallonsFuel tank 300 80Cooling system 30 8Crankcase 20 5.3Vibratory bearing lube 24 6.4Differential & final drives 28 7.3Hydraulic system 80 21Filtration system (pressure type)

Propel 15 micron absoluteVibratory 15 micron absolute

9CS-531D, CS-533D and CP-533D specifications

SteeringA priority-demand hydraulic power-assist steering system provides smoothlow-effort steering. The system alwaysreceives the power it needs regardlessof other hydraulic functions.

Minimum turning radius:Inside 3,53 m (11' 7")Outside 5,66 m (18' 7")

Steering angle: (each direction) ± 35°

Oscillation angle: (each direction) ± 15°

Hydraulic system:Two 76 mm (3") bore, double-actingcylinders powered by a gear-type pump.

FrameFabricated from heavy gauge steel plateand rolled sections and joined to thedrum yoke at the articulation pivot.Articulation area is structurallyreinforced and joined by hardened steelpins. Two vertical pins provide asteering angle of ± 35° and a horizontalpin allows frame oscillation of ± 15°.Sealed-for-life hitch bearings neverneed greasing or shimming.

Parts availability — most parts on dealer’s shelf when you need them. Computer-controlled, emergency search system backup.

Remanufactured parts — vibratory pods, pumps and motors, engines, fuel systemand charging system components available from dealer at 20-50% of new part cost.

Service capability — dealer’s shop or fast field service by trained technicians usinglatest tools and technology.

Flexible financing — your dealer can arrange attractive financing on the entire lineof Caterpillar equipment. Terms structured to meet cash flow requirements. See howeasy it is to own, lease or rent Cat equipment.

Total Customer Support System

TransmissionCS-531DVariable displacement piston pump supplies pressure flow to a two-speed pistonmotor driving the rear axle.

CS-533D/CP-533DTwo variable displacement piston pumps supply pressurized flow to two dualdisplacement piston motors. One pump and motor drives the drum propel systemwhile the other pump and motor drives the rear wheels. The two-pump systemensures equal flow to the drive motors regardless of the operating conditions. Incase the drum or wheels lose traction, the other motor can still build additionalpressure to provide added torque.

The drive motors have two swashplate positions allowing operation at eithermaximum torque for compaction and gradeability or greater speed for movingaround the job site. A toggle switch at the operators console triggers an electric overhydraulic control to change speed ranges.

Speeds (forward and reverse):

CS-531D/CS-533D CP-533D

Low Range 6,4 km/hr – 4.0 mph 6,5 km/hr – 4.0 mphHigh Range 12,7 km/hr – 7.8 mph 13,2 km/hr – 8.1 mph

Final Drives and AxleFinal Drive:CS-531DFinal drive is hydrostatic through inputgear reduction, differential andplanetary gear reduction in each wheel.

CS-533D/CP-533DDrum final drive is hydrostatic throughplanetary gearbox. Axle drive throughinput gear reduction, differential andplanetary gear reduction in each wheel.

Axle:Axle width 1,67 m (5' 6")CS-531D

Truetrac® differential standard on CS-531D. (Optional on CS-533D andCP-533D).

CS-533D/CP-533DHeavy-duty fixed rear axle with standarddifferential for efficient torque transfer.

TiresCS-531D/CS-533D

587 mm (23.1") x 660 mm (26")8-ply flotation

CP-533D587 mm (23.1") x 660 mm (26")8-ply traction

BrakesService brake featuresClosed-loop hydrostatic drive systemprovides dynamic braking duringmachine operation.

Secondary brake featuresSpring-applied/hydraulically-released. It isactivated by: button on the operator’sconsole; loss of hydraulic pressure in thebrake circuit; or when the engine is shutdown. A brake interlock system helpsprevent driving through the secondarybrake.

CS-531DWet disc brakes integrated into axle.

CS-533D/CP-533DSecondary brake is part of the drumdrive gearbox.

*Braking system meets SAE J1472 JAN98

10 CS-531D, CS-533D and CP-533D specifications

DimensionsCS-531D/CS-533D CP-533D

A Operating length 5,51m (18' 1") 5,51m (18' 1")B Length with blade 6,04 m (19' 10") 6,04 m (19' 10")C Max. machine width 2,29 m (7' 6") 2,29 m (7' 6")

Outside turning radius 5,66 m (18' 7") 5,66 m (18' 7")Inside turning radius 3,53 m (11' 7") 3,53 m (11' 7")

D Compaction width 2,13 m (7' 0") 2,13 m (7' 0")E Blade width 2,43 m (8' 0") 2,43 m (8' 0")F Blade cutting depth 76 mm (3") 76 mm (3")G Drum diameter 1524 mm (60") — —

Drum diameter over pads — — 1549 mm (61")H Height at ROPS 3,02 m (9' 11") 3,10 m (10' 2")I Height at exhaust stack 2,90 m 9' 6") 2,98 m (9' 9")J Height to hand rail 2,42 m (8' 0") 2,50 m (8' 3")K Ground clearance 483 mm (19") 543 mm (21")L Wheelbase 2,90 m (9' 6") 2,90 m (9' 6")

A

K

H

BL

G

CE D

F

I

Operating WeightsWeights include lubricants, coolant, full fuel and hydraulic tanks and a 80 kg (175 lb) operator.

CS-531D CS-531D (padded) CS-533D CP-533DStandard machine 9410 kg (20,702 lb) 9572 kg (21,058 lb) 9720 kg (21,384 lb) 10 010 kg (22,022 lb)with ROPS/FOPS 9650 kg (21,230 lb) 9810 kg (21,582 lb) 9960 kg (21,912 lb) 10 240 kg (22,528 lb)with leveling blade – – – – 10 330 kg (22,726 lb) 10 620 kg (23,364 lb)at drum 5410 kg (11,902 lb) 5352 kg (11,774 lb) 5625 kg (12,375 lb) 5840 kg (12,848 lb)with ROPS/FOPS 5471 kg (12,036 lb) 5531 kg (12,168 lb) 5690 kg (12,518 lb) 5906 kg (12,993 lb)with leveling blade – – – – 6525 kg (14,355 lb) 6740 kg (14,828 lb)

J

11CS-531D, CS-533D and CP-533D specifications

Leveling Blade is designed to bolt ontothe drum yoke of the CS-533D and CP-533D. Complete unit includes heavy-duty blade, push arms, field removablebolt-on connectors, reversible/replaceable cutting edges, replaceablewear plates, a heavy-duty hydraulic liftcylinder and control valve. Moldboard isconstructed of multiple box sections.Blade measures 2,43 m (8') wide and660 mm (26") high. Maximum depth ofcut is 76 mm (3").

ROPS Cabin includes one access door,tinted safety glass windows, electricwipers front and rear, heater/defroster,two vertically sliding side windows forventilation, two exterior rear viewmirrors, front and rear working lights,cab lift cylinder, interior dome light, andcoat hook.Cab is fully EROPS rated and meets SAEstandard. J1040 MAY94

Roll Over Protective Structure/FallingObject Protective Structure (ROPS/FOPS)is a two-post structure that bolts directlyonto flanges welded to the operatorplatform. The ROPS/FOPS meets SAEstandards.

Non-ROPS Canopy provides rain and sunprotection for the operator.

Suspension Seat completely adjustablewith two armrests and retractable 76 mm(3") seat belt. Provides fore, aft andheight adjustment.

Backup Alarm—112 dB(A) alarmsounds whenever the machine is inreverse. The backup alarm has threesound levels that can be changed with aswitch located on the alarm.

Operator Platform Lift Cylinder isavailable as a Custom Shop Order(CSO) and provides a hydraulic cylinderto raise and lower operator platform.

Padded Drum Conversion Kit (forCS-533D only) is interchangeable withthe smooth drum. Kit includes allinternal components plus external drumcleaner teeth. It does not includehydraulic motors. Conversion time isapproximately six hours. Padded drumdimensions and performance are thesame as CP-533D.

Smooth Drum Conversion Kit (forCP-533D only) is interchangeable withthe padded drum and includes allinternal components plus external drumcleaner bars. It does not includehydraulic motors. Conversion time isapproximately six hours. Drumdimensions and performance are thesame as on the CS-533D.

Two-piece Pad Foot Shell Kit bolts ontothe smooth drum CS-531D or CS-533Dand features 90 mm (3.5") high pads.Includes special bumper.

Two-piece Smooth Shell Kit bolts ontothe padded drum CP-533D. Includesspecial bumper.

Variable Frequency, Independent ofEngine rpm electronic displacementcontrol on vibratory pump is controlledby frequency dial on the operator’sstation. Engine rpm remain unchangedfor maximum hydraulic pump flow andtorque to drive motors. Frequency rangefrom 23,3-31,9 Hz (1,400-1,914 vpm)makes it easier to match frequency,amplitude and working speed to jobconditions.

Transmission Guard consists of a heavyplate which covers the rear axle, axledrive motor and input gearbox.

Vibratory Tachometer displays actualvibratory system frequency on consolein front of the operator. Most usefulwhen ordering variable frequencyoption.

Urethane Drum Scrapers for CS-531Dand CS-533D provides front and rearscrapers for continuous contact with thedrum surface and replaces the standardsteel scraper.

Padded Drum Rear Scrapers for the CP-533D and CS-531D padded drumversion help keep material from buildingup on the drum.

Working Light Package illuminatesimmediate work area under dim or darkconditions. Four flood lights arepositioned two forward and two back.This system is intended for use under working

conditions and not for highway transport purposes.

Tire Ballast adds 1110 kg (2,440 lb) offluid ballast to the rear wheels.

Truetrac Limited Slip Differentialreplaces the standard differential on theCS-533D and CP-533D.

CS-531D Padded Drum Configuration hasthe same performance specifications asthe CP-533D, but is single-pump wheeldrive only model.

Optional Equipment

ZEHQ9609 (5/00)

© 2000 Caterpillar

www.CAT.com.

Featured machines in photography may include optional equipment.

Materials and specifications are subject to change without notice.