Critchley Cable Markers
1
Z-Type Push-On Wire Markers
Specifications/approvals
Tyco Electronics TTDS- 026.
Temperature rating
Operating temperature range –45°C to +70°C –50°F to +158°F.
0616 1 4 00
Part numbering system
Legend codeColour codePackaging codeProduct/size code
Z-Type markers are individual push-oncharacters used to identify wires andsmall cables permanently. They aredesigned with an expanding profile,enabling each marker to accommodatea wide range of wire/cable sizes.
Z-Type markers are a simple, cost-effective solution for many commercialwire identification applications. Themarkers are supplied either straight cutor chevron cut: the chevron cut optionensures the legends remain aligned.Standard Z-Type markers are yellow orwhite with black legends and can besupplied as loose pieces packed inboxes or on reels. Colour codedmarkers are also available.
Features and benefits
• Resistant to sea water,fuels and oils
• 9 sizes covering wire diameters from 1.5mm to 12.7mm (0.06" to 0.5")
• Applicator wands available for easymarker installation
2
Z-Type Push-On Wire Markers
Ordering Information
Size code Size code Marker size Marker length Pack quantity Cable diameter
(straight cut) (chevron cut) (mm) (mm) (inches)
0580 1151 5 4.5 1000 1.5 - 2.0 (0.06 - 0.08)0581 1152 7 4.5 1000 2.0 - 3.2 (0.08 - 0.13)0615 1153 9 4.5 1000 2.5 - 4.0 (0.10 - 0.16)0616 1154 11 4.5 1000 2.9 - 4.7 (0.11 - 0.19)0617 1155 13 4.5 1000 3.4 - 5.7 (0.13 - 0.22)0618 1156 15 4.5 1000 3.8 - 6.3 (0.15 - 0.25)0620 1157 18 4.5 500 4.3 - 6.9 (0.17 - 0.27)0622 1158 23 6.0 500 5.5 - 8.9 (0.22 - 0.35)0624 1159 35 6.0 250 7.9 - 12.7 (0.31 - 0.50)
Packaging code
1 box 3 reel
Colour code (available for all legends)4 yellow 9 white
Packaging options available
Straight cut Chevron cut
White marker with black legend: Boxes, reels White marker with black legend: Boxes
Yellow marker with black legend: Reels Yellow marker with black legend: Reels
Colour coded Boxes Colour coded Boxes, reels
Colour code
Legend Marker colour Ink colour Legend Marker colour Ink colour
0 Black White 1 Brown White
2 Red Black 3 Orange Black
4 Yellow Black 5 Green Black
6 Blue Black 7 Violet Black
8 Grey Black 9 White Black
Order example: 06161400 (Z-Type markers, size 11, yellow marker with black legend 0, boxed)
Legend code
Legend Code Legend Code Legend Code
0 00 J 19 / 38
1 01 K 20 ~ 39
2 02 L 21 Earth 40
3 03 M 22 ) 41
4 04 N 23 Blank 42
5 05 O 24 : 43
6 06 P 25 , 44
7 07 Q 26 < 45
8 08 R 27 > 46
9 09 S 28 + 47
A 10 T 29 . 48
B 11 U 30
C 12 V 31
D 13 W 32
E 14 X 33
F 15 Y 34
G 16 Z 35
H 17 + 36
I 18 - 37
Applicators
Order code Marker size Pack quantity Order code Marker size Pack quantity
12510000 7 1 12520000 9 1
12530000 11 1 12540000 13 1
12550000 15 1 12560000 18 1
3
K-Type Cable Markers
K-Type markers are used to identifywire bundles, cables, pipes andconduits using specially designed ovalshaped, individual characters that slideon to a PVC carrier, which is thenattached to the substrate using cableties. K-Type markers are ideal for posttermination applications or whereretrofit is anticipated.
These markers are supplied yellow withblack legends and in the standardInternational colour code option andare supplied on reels. K-Type markerscome in one standard size to fit carrierstrips that can hold from 7 to 18markers and are made from aplasticised PVC material.
Features and benefits
• Versatile marking system for cables,cable bundles and conduit
• Elliptical marker profile allows easyfitting to carrier strips
Specifications/approvals
Tyco Electronics TTDS- 025.
Temperature rating
Operating temperature range –40°C to +70°C –40°F to +158°F.
1361 1 4 01
Part numbering system
Legend codeColour code Packaging code Product/size code
Ordering InformationSize code Marker size Marker length (mm) Cable diameter (mm) Reel quantity
1361 65 60 4.20 – 7.00 500
Packaging code
1 reel
Colour code (available for all legends)4 yellow 9 white
International colour code
Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour0 Black White 1 Brown White 2 Red Black3 Orange Black 4 Yellow Black 5 Green Black6 Blue Black 7 Violet Black 8 Grey Black9 White Black
Legend code
Legend Code Legend Code Legend Code0 00 J 19 / 381 01 K 20 ~ 392 02 L 21 Earth 403 03 M 22 ) 414 04 N 23 Blank 425 05 O 24 : 436 06 P 25 , 447 07 Q 26 < 458 08 R 27 > 469 09 S 28 = 47A 10 T 29 . 48B 11 U 30C 12 V 31D 13 W 32E 14 X 33F 15 Y 34G 16 Z 35H 17 + 36I 18 - 37
Carrier strips
Order code Marker size Capacity Quantity11320000 65 7 markers 50011310000 65 12 markers 50011300000 65 18 markers 25011330000* 65 12 markers 100
* This carrier can be used to flag
Universal carrier strip flag type11330000 65 12 markers 100
K-Type Cable Markers
Carrier Strips for K-Type MarkersCarrier strips provide a simple method for carrying the K65 marker and are idealfor marking large diameter cables. Slotted ends allow for fastening by cable ties.The Universal type has an additional hole at one end to allow ‘flag’ fixing by asingle cable tie.
Service temperature range: –40˚C to +70˚C.Material: Semi-rigid black PVC.Slot dimensions: 1.8mm x 8.3mm.
K-Type marker size Capacity Packed Order codeCarrier strip
65 7 digits 500 1132
65 12 digits 500 1131
65 18 digits 250 1130
Universal carrier strip flag type
65 12 digits 100 1133
Service temperature range: –40˚C to +70˚C.
Material: PPVC.
Chemical ResistanceExcellent: Sodium Hydroxide, Sea Water, Tap Water, Detergent, Diala Oil B, Petrol,Diesel, 50% Sodium Chloride Solution, Concentrated Nitric Acid, AmmoniumHydroxide, Methanol, Diethyl Ether, White Spirit, Sullage Fluid, Silicone HydraulicFluid, Aeroshell (4), Castrol Gas Turbine Oil 98, Kilfrost Fluid, Aircraft Fuel.
Poor: Concentrated Hydrochloric Acid, Acetone, 1, 1, 1 Trichloroethane, Skydrol 500 B4.
Other carriers for K-Type Markers4mm cable tie.4
• Accepts K65 marker for large cables or conduits
• Slotted ends for fixingby cable tie.
Snap-On Wire Markers
Tyco Electronics snap-on markers areconvenient and easy to use. Thesemarkers are supplied on a ‘wand’applicator that simplifies and reducesinstallation time, and saves on the costof marking.
Snap-on wire markers are designed tostand the test of time, preventingcostly re-work before the life of theequipment ends. This is why TycoElectronics snap-on markers are foundtoday in power stations, oil refineries,offshore platforms, and other majorprojects around the world.
Features and benefits
• Snap-on markers are the perfect wayto permanently and rapidly markcables, wires, leads, and cores aftertermination and installation
• Easy to alter identification on cablesthat are already marked
• Secure grip for positive fixing to cable• The high elasticity of the marker
enables all types of installation and conduction material to bepermanently marked without damage
• Applicator has a patented slit toprevent over-expansion of themarker during application
• Made from polyoxymethylene whichguarantees strength, dimensionalstability, low moisture absorption,and resistance to chemicals
• Resistant against oils, cleaningagents, fuels, and alkaline solutions.
• Zero halogen material• Ten sizes for cable diameters 0.04"
to 0.75" (1.0mm to 19.0mm)• Colour coded option
Specifications/approvalsTyco Electronics TTDS- 094.
Temperature ratingOperating temperature range –40°C to +106°C –40°F to +223°F.
STD 06 W -4
Part numbering system
Legend codeColour code (eg. W=white)SizeSnap-on marker
5
6
Snap-On Wire Markers
Ordering Information
Size Cable diameter Colour of Packed box
code (mm) (inches) applicator wand
STD 01 1.00 - 1.40 0.040 - 0.055 Brown 10 mounting wands with 30 identical markers
STD 02 1.40 - 1.80 0.055 - 0.071 Grey 10 mounting wands with 30 identical markers
STD 03 1.90 - 2.65 0.075 - 0.104 Green 10 mounting wands with 30 identical markers
STD 05 2.60 - 3.50 0.091 - 0.118 Natural 10 mounting wands with 30 identical markers
STD 06 2.60 - 3.50 0.102 - 0.138 Red 10 mounting wands with 30 identical markers
STD 09 3.25 - 4.50 0.128 - 0.138 Blue 10 mounting wands with 30 identical markers
STD 12 4.50 - 6.00 0.177 - 0.236 Yellow 10 mounting wands with 30 identical markers
STD 15 5.80 - 8.50 0.228 - 0.335 Orange* 50 identical markers; mounting wand available on request
STD 17 8.50 - 11.50 0.335 - 0.452 Orange* 50 identical markers; mounting wand available on request
STD 21 11.00 - 15.50 0.433 - 0.610 Grey* 50 identical markers; mounting wand available on request
STD 24 15.00 - 19.00 0.590 - 0.750 Grey* 50 identical markers; mounting wand available on request
Colour code (available for all legends)Y yellow W white
Legend code
Legend Code Legend Code Legend Code
0 0 J J / Slash
1 1 K K Earth Earth
2 2 L L Blank Blank
3 3 M M : Colon
4 4 N N = Equals
5 5 O O . Dot
6 6 P P
7 7 Q Q
8 8 R R
9 9 S S
A A T T
B B U U
C C V V
D D W W
E E X X
F F Y Y
G G Z Z
H H + Plus
I I - Minus
Applicators
Order code Marker size Colour of applicator Number of applications per pack
STD15 - Applicator 15 Orange 5
STD17 - Applicator 17 Orange 5
STD21 - Applicator 21 Grey 2
STD24- Applicator 24 Grey 2
7
G-Type Push-On Wire Markers
Specifications/approvalsTyco Electronics TTDS- 024.
Temperature ratingOperating temperature range –45°C to +70°C –50°F to +158°F.
Flammability
LOI 40%, FTI>300°C.
0719 1 4 01
Part numbering system
Legend codeColour code (4 = yellow only)Packaging code (1 = box only)Product/size code
G-Type markers are individual push-oncharacters used to identify wires andsmall cables. They are designed with anexpanding profile, enabling eachmarker to accommodate a wide rangeof wire/cable sizes. The markers aresupplied chevron cut to ensure thelegend remains aligned.
G-Type markers are yellow with blacklegends and are supplied as loosepieces packed in boxes.
G-Type markers are particularly suitablefor applications requiring low firehazard properties. They are made froma self extinguishing modifiedthermoplastic polymer and arehalogen, silicone and cadmium free.
Features and benefits
• Low fire hazard• Zero halogen, self extinguishing
material• Gusseted design allows marker to fit
over a wide range of cable diameters• Chevron cut ensures markers
stay aligned
8
Ordering Information
Markers
Size code Marker size Cable diameter (mm) Box quantity
0719 G3/10 1.40 - 2.50 1000
0720 G3/20 2.00 - 3.50 1000
0721 G4/10 3.00 - 6.00 500
0722 G6/10 5.00 - 9.50 250
0723 G6/20 8.00 - 12.50 250
Packaging code
1 box
Colour code (available for all legends)4 yellow
Legend code
Legend Code Legend Code Legend Code
0 00 J 19 / 38
1 01 K 20 ~ 39
2 02 L 21 Earth 40
3 03 M 22 ) 41
4 04 N 23 Blank 42
5 05 O 24 : 43
6 06 P 25 , 44
7 07 Q 26 < 45
8 08 R 27 > 46
9 09 S 28 = 47
A 10 T 29 . 48
B 11 U 30 L1 51
C 12 V 31 L2 52
D 13 W 32 L3 53
E 14 X 33 SERD 54
F 15 Y 34 PE 55
G 16 Z 35 PEN 56
H 17 + 36 ( 62
I 18 - 37
G-Type Push-On Wire Markers
9
V-Type markers are individual push-oncharacters used to identify wires andsmall cables permanently. They aredesigned with an expanding profile,enabling each marker to accommodatea wide range of wire/cable sizes.
V-Type markers are a simple, cost-effective solution for many commercialwire identification applications. Themarkers are supplied chevron cut andthis ensures the legends remainaligned. Standard V-Type markers areyellow or white with black legends andcan be supplied as loose pieces packedin boxes, on reels or flat disc reels.Colour coded markers are also available.
Features and benefits
• Resistant to sea water, fuels and oils• 4 sizes covering wire diameters from
1.4mm to 16.0mm (0.06" to 0.63")
V-Type Manual Wire and Cable Markers
Specifications/approvalsTyco Electronics TTDS- 096.
Temperature ratingOperating temperature range –45°C to +70°C –50°F to +158°F.
0761 1 4 00
Part numbering system
Mark/legend codeColour code Packaging code Product/size code
10
V-Type Manual Wire and Cable Markers
Ordering Information
Size code Marker size Cable diameter Packed
(mm) (inches)
0761 3 1.40 - 2.80 0.06 - 0.11 1000
0762 5 2.80 - 5.00 0.11 - 0.20 1000
0723 10 4.00 - 10.00 0.16 - 0.39 500
0764 15 8.00 - 16.00 0.31 - 0.63 250
Packaging code
1 box 3 reel
Colour code (available for all legends)4 yellow 9 white
Colour code (for numbers 0-9 only)
Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour
0 Black White 1 Brown White 2 Red White
3 Orange Black 4 Yellow Black 5 Green White
6 Blue White 7 Violet White 8 Grey Black
9 White Black
Mark/Legend code
Legend Code Legend Code Legend Code
0 00 J 19 / 38
1 01 K 20 ~ 39
2 02 L 21 Earth 40
3 03 M 22 ) 41
4 04 N 23 Blank 42
5 05 O 24 : 43
6 06 P 25 , 44
7 07 Q 26 < 45
8 08 R 27 > 46
9 09 S 28 = 47
A 10 T 29 . 48
B 11 U 30
C 12 V 31
D 13 W 32
E 14 X 33
F 15 Y 34
G 16 Z 35
H 17 + 36
I 18 - 37
11
O-Type Manual Wire and Cable Markers
The O-Type marker is a thin walledplasticised PVC marker which isparticularly suited to high densitywiring applications where space savingis paramount.
They are colour coded to BS3858: 1992which includes repeated printing of theindividual digit three times around thecircumference of the marker.
Letters and symbols are printed on apink background.
Features and benefits
• Conforms to BS3858: 192 Type 3• Colour coding enables identification
when mark is obscured• Thin wall for densely packed wiring• Nine sizes of marker cover cable
sizes up to 16mm2
Temperature ratingOperating temperature range –65°C to +95°C –85°F to +203°F.
1106 99 10
Part numbering system
Mark/legend codeColour code Product/size code
12
O-Type Manual Wire and Cable Markers
Ordering Information
Size code Marker size Marker length (mm) Cable diameter (mm) Cable size mm2 Packed
Part cut
1106 0.75 3.00 0.60 - 1.00 - 1000
1107 10 4.00 0.90 - 1.30 - 1000
1108 12 3.00 1.10 - 1.60 - 1000
1109 15 3.00 1.40 - 2.10 - 1000
1110 20 5.00 1.90 - 2.80 - 1000
1111 25 5.00 2.40 - 3.50 1.00 1000
1112 30 5.00 2.90 - 4.80 1.50 1000
1113 40 5.00 3.90 - 5.80 2.50 & 4.00 1000
1114 55 5.00 5.30 - 8.00 6.00 & 10.00 1000
Colour code (available for all legends)99 pink
Colour code (for numbers 0-9 only)
Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour
0 Black White 1 Brown White 2 Red Black
3 Orange Black 4 Yellow Black 5 Green Black
6 Blue Black 7 Violet Black 8 Grey Black
9 White Black
Mark/Legend code
Legend Code Legend Code Legend Code Legend Code
0 00 J 19 / 38 SO 57
1 01 K 20 ~ 39 -10 58
2 02 L 21 Earth 40 -1 59
3 03 M 22 ) 41 -2 60
4 04 N 23 Blank 42
5 05 O 24 : 43
6 06 P 25 , 44
7 07 Q 26 < 45
8 08 R 27 > 46
9 09 S 28 = 47
A 10 T 29 . 48
B 11 U 30 Ä 49
C 12 V 31 Ö 50
D 13 W 32 L1 51
E 14 X 33 L2 52
F 15 Y 34 L3 53
G 16 Z 35 SERD 54
H 17 + 36 PE 55
I 18 - 37 PEN 56
13
TKM Hand Writable Booklet Self-Laminating Labels
Tyco Electronics TKM self writable,clear vinyl film with a permanentacrylic adhesive is supplied witha white writable area, which isover-laminated upon applicationwith the clear portion of the label.
TKM labels are a quick, simple anddurable form of wire, cable and pipe identification.
Features and benefits
• Manufactured with a white coated areafor writing on, and with a clear wrap towind around a wire or cable to coverthe written legend and to protect itagainst impurities that would causethe label to become illegible
• Protects printed information fromchemicals and frequent handling
• Supplied in a handy pocketsize booklet
• Designed to withstand exposure toSolvents, salts, alkalis and water
Temperature ratingOperating temperature range –30°C to +120°C –22°F to +248°F.
TKM 50 WE-N
Part numbering system
Standard packagingColour (WE=White)*Label sizeProduct family
*TKM size 50 only. Omit this for other sizes
14
TKM Hand Writable Booklet Self-Laminating Labels
Available sizes and formats
Ordering Markers/ A B C Max. cable description pack height Text field height width diameter
(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)
TKM50WE-N 90 50.00 2.00 15.00 0.60 25.00 1.00 10.00 0.40
TKM75-N 60 75.00 3.00 25.00 1.00 25.00 1.00 14.00 0.60
TKM150-N 30 150.00 6.00 25.00 1.00 25.00 1.00 38.00 1.50
TKM230-N 30 230.00 9.00 25.00 1.00 25.00 1.00 63.00 2.50
Accessories for manual marking
Ordering description Description Quantity per pack
ZUB-01 Felt-tip pen, fine 1
ZUB-03 Pencil for UV-resistant labelling 1
Ordering information
15
WCD Write-On Self-Laminating Label Dispensers
Tyco Electronics WCD pocket sizedlabel dispenser contains a roll ofpre-cut self-laminating cable markers.Each market has a white markablearea for legend inscription using thespecified marker pen (ZUB-01).
Manufactured with a white coated areafor writing on, and with a clear wrap towind around a wire or cable to coverthe written legend and to protect itagainst impurities that would cause thelabel to become illegible.
Features and benefits
• Protects printed information fromchemicals and frequent handling
• Supplied in a handy pocket sizedisposable dispenser
• Aggressive acrylic adhesiveimpervious to oil and water
Specifications/approvalsTyco Electronics TTDS-140.
Temperature rating
Operating temperature –40°C to +80°C -40°F to +176°F
WCD - 318
Part numbering system
Label length (ex 31.8mm)Product family
16
WCD Write-On Self-Laminating Label Dispensers
Ordering Information
Available sizes and formats
Ordering Markers/ A B C Max. cable description pack height height width diameter
(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)
WCD-318 300 31.80 1.25 7.95 0.31 19.00 0.75 7.62 0.30
WCD-476 150 47.60 1.87 12.70 0.50 19.00 0.75 10.16 0.40
WCD-762 90 76.20 3.00 19.00 0.75 19.00 0.75 17.78 0.70
WCD-1520 40 152.00 5.98 25.40 1.00 19.00 0.75 40.64 1.60
Accessories for manual marking
Ordering description Description Quantity per pack
ZUB-01 Felt-tip pen, fine 1
ZUB-03 Pencil for UV-resistant labelling 1
17
CMD Cable and Wire Marker Dispenser
Tyco Electronics CMD portable wiremarker is one of the most user friendlysystems available. Each dispensercontains 10 rolls of individuallynumbered marker tape. Each roll ofmarkers contains 76 individual markerswhich are a convenient length thataccommodates most commonlyidentified wire sizes.
Manufactured from DuPont Tyvek®
material to ensure durability andminimize the potential of tearing.
Features and benefits
• Supplied with a pre-determinedlength of 32mm and a width of 6.4mm
• Supplied in a handy pocket sizereusable dispenser
• Aggressive acrylic adhesiveimpervious to oil and water Specifications/approvals
Tyco Electronics TTDS-141.
Temperature ratingOperating temperature –40°C to +80°C -40°F to +176°F.
CMD - 0-9
Part numbering system
ContentsProduct family
DuPont® and Tyvek® are trademarks of E.I. DuPont de Nemours and Company.
18
CMD Cable and Wire Marker Dispenser
Ordering information
A
B
Available sizes and formats
Ordering Markers/ A B Commentsdescription pack height height
(mm) (inches) (mm) (inches)
CMD-0-9 10x76 32.00 1.25 6.40 0.25 Loaded dispenser contains markers pre-marked 0 to 9
CMD-C-C 10x76 32.00 1.25 6.40 0.25 Loaded dispenser contains colour coded markers
Extra items
CMD-0-9-REFILL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked 0 to 9
CMD-CC-REFILL 10x76 32.00 1.25 6.40 0.25 Refill box colour coded
CMD-EMPTY N/A N/A N/A Empty dispenser
CMD-A-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked A
CMD-B-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked B
CMD-C-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked C
CMD-D-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked D
CMD-E-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked E
CMD-F-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked F
CMD-G-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked G
CMD-H-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked H
CMD-L-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked L
CMD-N-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked N
CMD-R-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked R
CMD-S-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked S
CMD-T-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked T
CMD-U-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked U
CMD-V-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked V
CMD-W-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked W
CMD-MINUS-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked –
CMD-PLUS-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked +
19
CWM Wire Marker Cards
Tyco Electronics CWM pre-printed wiremarkers are made with our white vinylcoated cloth tape material, supplied ona thick, easy to handle card stock, witha permanent, rubber based, pressuresensitive adhesive for easy application.Ideal for basic wire markingapplications where pre-printed singleor double-digit legends and someresistance to a variety of solvents,water, oil, dirt and heat is required.
Features and benefits
• Convenient and easy to use• Pre-printed for on-site wire marking• Available in colours for colour
coding applications • Available in single and multiple
digit legends
Specifications/approvalsTyco Electronics TTDS- 100.
Temperature rating
Operating temperature range –40°C to +82°C –40°F to +180°F.
20
CWM Wire Marker Cards
*Solid cards (SL) = 1 legend on each card. Select a single legend and add to the suffix of the product order code.
*Sequential cards (SQ) = a consecutive range of alpha or numeric legends on each card, as specified in the suffix of the product order code.
*Available options on product order code CWM-SL-legends are: T1, T2, T3, L1, L2, L3, GND, P1, A1, XS, PTO. Add legend suffix of order code.
Ordering Information
Product Legend option Package quantity Label width Label height Card width Card heightorder code (mm) (inches) (mm) (inches) (mm) (inches) (mm (inches)
CWM-SL-# * Solid Numbers 0-99 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000CWM-SL-letter * Solid Letters A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SL-colour * Solid Colours 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SL-legend * Solid 2+ Digits 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-1-33 Sequential 1 - 33 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-34-66 Sequential 34 - 66 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-67-99 Sequential 67 - 99 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-A-Z Sequential A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-AA-ZZ Sequential AA - ZZ 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-a-z Sequential a - z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-1-6 Sequential 1 - 6 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
CWM-SQ-1-18 Sequential 1 - 18 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000
21
• 316 stainless steel• Slotted channel• Tile face level with channel edge• Embossed characters• Single pressing, one-piece tie
Stainless Steel Betamarker The stainless steel Betamarker Tiles is designed for use with the light duty stainlesssteel Beta-Ties cable ties. It has an embossed highly visible mark on a tile face that islevel with the carrier channel sides. This allows for easy cleaning of paint coveredmarks.
Different carrier lengths accommodate most tagging requirements. Alternative fixing to cabinets or as a tag is made through holes in the carrier back.
Marks available: A-Z, 0-9, +, –, /and blank.
Labelling Systems
Description Packed Order code
BetaMarker tiles (20 per strip) 200 tiles 0700
Carrier strips 6 digits 100 strips 0703
10 digits 00 strips 0704
16 digits 50 strips 0705
Uncoated stainless steel Beta-Ties 5 x 140mm 250 tiles 1819
22
PM 0 75 07–1–4–5
Permark Markers
Part numbering system
Characters/spacesper lineFont height (mm)Number of text linesTag height (mm)Tag length (mm)Filler characterPermark
Tyco Electronics Permark 316 stainlesssteel markers are recommended formarking in hostile environments. Usingstate-of-the-art technology and noinks, the marking process produces apermanent, deep surface mark with adarkened character in high contrast to the background. Permark markersare produced to individual customerrequirements on a fast turn-aroundbasis with the flexible and easy to usePermark software that allows electronicor manual data entry. Completedmarkers are supplied in customerdefined kits for ease of installation. Werecommend installation with 316stainless steel cable ties.
Features and benefits
• Pre-marked to customerrequirements
• Customer defined kits for ease of installation
• Excellent character legibility• One-piece, 316 stainless
steel construction• Variety of fixing methods• Mark will endure the lifetime of a
Permark S/S marker• Excellent resistance to weather
extremes and high levels of UV light• Resistant to corrosive marine and
industrial atmospheres• Excellent resistance to a variety of
hydrocarbons, organic chemicals,acids, alkalis and inorganic salts.For resistance to a specific chemical, contact your local Tyco Electronicsrepresentative
Service temperature range: 80˚C to +500˚C (112˚F to +932˚F).
Material: Stainless Steel.
Printer information: Pre-printed per customer requirements. Permark Speciality Products.
23
Permark Markers
Available sizes and formats
Ordering Product Size (L x H) Printable area (L x H)description description mm inches mm inches
PM09512-<# text lines> Pre-marked 316 95 x 12 3.74 x 0.47 55 x 10 2.16 x 0.40-<font height> S/S marker-<# characters>
OptionsFonts Various available
Lines per marker One, two or three (Determined by selected font height. Minimum 1 mm / 0.04" spacing between lines.)
Saddle fixings 13 mm L x 2.4 mm H (0.51" L x 0.09" H)
Hole fixings 7 mm (0.28")
Standard colours Metallic
Font heights Characters per lineStandard Condensed
2.5 mm (0.10") 30 N/A
3.0 mm (0.12") 25 N/A
4.0 mm (0.16") 20 30
5.0 mm (0.20") 15 25
6.0 mm (0.24") 15 25
8.0 mm (0.31") 10 20
10.0 mm (0.40") 10 15
Available sizes and formatsOrdering Product Size (L x H) Printable area (L x H)description description mm inches mm inches
PM07507-1-<font height> Pre-marked 316 75 x 7 2.95 x 0.28 50 x 5 1.6 x 0.20-<# characters> S/S marker
OptionsFonts Various available
Lines per marker One only
Saddle fixings 9.5 mm L x 2.4 mm H (0.37" L x 0.09" H)
Hole fixings None
Standard colours Metallic
Font heights Characters per lineStandard Condensed
4.0 mm (0.16") 15 25
5.0 mm (0.20") 10 20
PERM
ARK
Printer Specifications
Printing method: Thermal transfer printhead (180dpi)
Dimensions: 70mm L x 114mm W x 212mm H
Printer weight: 519g
Keyboard: ABC layout. To access international characters: Rapid AccentedCharacter Entry, according to the mobile phone principle.
LCD display: 2 lines. Rechargeable battery pack life indicator. Display backlighting
Operating conditions: Temperature: 4°C to 40°C (39°F to 104°F)Humidity: 10% to 90% RH
Printer kit contents
PrinterRubber protection bumperUser guideSix (6) AA batteriesPower adaptorHard carry caseOne (1) 19mm white flexible nylon tape printer cassetteOne (1) 9mm yellow heat-shrinkable tubing printer cassette
24
Product order code Description
T107M-SMS-PRINTER-KIT-US Printer Kit - US power adaptor includedT107M-SMS-PRINTER-KIT-UK Printer Kit - UK power adaptor includedT107M-SMS-PRINTER-KIT-EU Printer Kit - European adaptor includedT107M-SMS-PRINTER-KIT-AUZ Printer Kit - Australian power adaptor includedT107M-SMS-PRINTER-KITASI Printer Kit - Asia power adaptor includedT107M-SMS-PRINTER-US Printer only (US)T107M-SMS-PRINTER-EU Printer only (European)SMS-US-A/C-ADAPTOR US A/C power adaptorSMS-EU-A/C-ADAPTOR European A/C power adaptorSMS-ASIA-A/C-ADAPTOR UK & Asia A/C power adaptorSMS-AUZ-A/C-ADAPTOR Australian A/C power adaptorSMS-BATTERY-PACK Rechargeable battery packSMS-CARRY STRAP Soft carry strapSMS-PRINTER-HARDCASE Hard case
The new T107M handheld printer fromTyco Electronics is perfect for theprofessional user who needs anaffordable label printer for on-siteapplications that's tough and easy touse. Contractors, panel builders andfacility managers will save time andmoney by using the special Hot Keysthat provide labels at the touch of abutton including wire and cable wraps,module marking, fixed length,serialization, vertical printing, barcodes,symbols and much more.
The T107M handheld printer offersclear, smudge-free high-performancelabels that stick permanently to avariety of surfaces and providesremarkable MIL-spec print permanenceon Heat Shrink Tubing. Print media isoffered in easy-to-load cassettes andincludes an optimized ribbon andchoice of material: Heat Shrink &Nylon Cloth, Vinyl, Polyester andPolypropylene labels.
T107M Handheld Printer
25
T107M Handheld Printer
Description Material Width Length Colour Technical datasheet(mm) (inches) (m)
SMS-NC-12-4 Nylon cloth 12 0.47 3.5 Yellow TTDS-123SMS-NC-12-9 Nylon cloth 12 0.47 3.5 White TTDS-123SMS-NC-19-9 Nylon cloth 19 0.75 3.5 White TTDS-123
SMS-PPNA-6-9 Non adhesive tag 6 0.24 5.5 White TTDS-124SMS-PPNA-9-9 Non adhesive tag 9 0.35 5.5 White TTDS-124
SMS-V-12-4 Coloured vinyl 12 0.47 5.5 Yellow TTDS-125SMS-V-12-9 Coloured vinyl 12 0.47 5.5 White TTDS-125SMS-V-19-2 Coloured vinyl 12 0.75 5.5 Red TTDS-125SMS-V-19-4 Coloured vinyl 19 0.75 5.5 Yellow TTDS-125SMS-V-19-5 Coloured vinyl 19 0.75 5.5 Green TTDS-125SMS-V-19-9 Coloured vinyl 19 0.75 5.5 White TTDS-125
SMS-WP-9-9 Polyester 9 0.35 5.5 White TTDS-126SMS-WP-12-9 Polyester 12 0.47 5.5 White TTDS-126SMS-MP-12-8A Polyester 12 0.47 5.5 Metalized TTDS-127SMS-MP-19-8A Polyester 19 0.75 5.5 Metalized TTDS-127SMS-CP-12-X Polyester 12 0.47 5.5 ClearSMS-CP-19-X Polyester 19 0.75 5.5 Clear
Ordering Information
T107M Cassettes
Description Material Cable diameter Length Shrink ratio Colour Technical datasheet(mm) (inches) (m)
SMS-TMS-3.9-4 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 Yellow TTDS-122SMS-TMS-3.9-9 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 White TTDS-122SMS-TMS-5.2-4 Heat-shrink tubing 1.73 - 3.73 0.07 - 0.15 1.5 3:1 Yellow TTDS-122SMS-TMS-5.2-9 Heat-shrink tubing 1.73 - 3.73 0.05 - 0.15 1.5 3:1 White TTDS-122SMS-TMS-7.9-4 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 Yellow TTDS-122SMS-TMS-7.9-9 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 White TTDS-122SMS-TMS-13.2-4 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 Yellow TTDS-122SMS-TMS-13.2-9 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 White TTDS-122
8-1773446-1 04/07 © 2007 – Tyco Electronics – All rights reserved TE Logo, Tyco Electronics, Critchley, Z-Type, G-Type, O-Type, K-Type,Betamarker, Beta-Strip, Beta-Ties and Penmark are trademarks. www.tycoelectronics.com
Europe/Middle East/Africa
Austria – Vienna Phone: +43-1-905-60-0 Fax: +43-1-905-60-1333 Product Information Center: Phone: +43-1-905-60-1249 Fax: +43-1-905-60-1251
Belgium – Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352
Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153
Czech Republic and Slovakia Czech Republic – Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132
Denmark – Glostrup Phone: +45-43-48-04-00 Fax: +45-43-44-14-14
Egypt – Cairo Phone: +202-419-2334 Fax: +202-417-7647
Estonia – Tartu Phone: +372-5138-274 Fax: +372-7400-779
Finland – Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250
France – Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623
France Export Divisions – Cergy-Pontoise Cedex Phone: +33-1-3420-8804 Fax: +33-1-3420-8699
Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988
Greece – Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655
Hungary – Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Product Information Center: Phone: +36-1-289-1016 Fax: +36-1-289-1017
Ireland – Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714
Israel – Petach-Tikva Phone: +972-3-929-0999 Fax: +972-3-919-1088
Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116Product Information Center: Phone: +39-011-4012-428 Fax: +39-011-40-287-428
Lithuania and Latvia Lithuania – Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403
Netherlands – ’s-HertogenboschPhone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998
Norway – Nesbru Phone: +47-66-77-88-50 Fax: +47-66-77-88-55
Poland – Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720
Romania – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574
Russia – Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-404 Fax: +7-495-790-7902-401
Russia – St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193
Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240
South Africa – Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440
Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879
Sweden – Upplands Väsby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01
Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444
Turkey – Istanbul Phone: +90-212-281-8181/2/3
+90-212-282-5130/5430 Fax: +90-212-281-8184
Ukraine – Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264
United Kingdom – Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only):
+0800-267-666Phone: +44-8706-080208 Fax: +44-208-420-8095