Cri Pumps

CRI Pumps

CRI Pumps is the leading manufacturer and distributor of Industrial Equipments such as pumps,valves, motors, steel casting, wires acrossworldwide.

For more details visit us at: http://www.crigroups.com/pumps.php

Water Pumps

A device applied to move fluids or slurries by mechanical action is termed as pump. Based on their pumping techniques, pumps can be classified into three categories: displacement, gravity and direct lift pumps. The CRI groups Water Pumps operation is either reciprocating or rotary. They basically consume energy to move fluids. They can be operated via many energy sources like electricity, wind power, manual operation and more.

For more details visit us at: Water Pumps

Agriculture and Residential Pumps

C.R.I. Agriculture & Residential pumpsets are the products of expertise gained from over five decades of experience, endurance and workmanship. C.R.I. Products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. C.R.I.'s unwavering determination has made us a strong presence across the country with 4000 plus channel partners and more than 700 service centers with readily available spares.

For more details visit us at: Agriculture and Residential Pumps

Submersible Pumps

A submersible pump or electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface.

For more details visit us at: Submersible Pumps

Centrifugal Pumps

Centrifugal pumps may be "multi-stage", which means they have more than one impeller and casing, and the water is passed from one impeller to another with an increase in pressure occurring each time. Each impeller/casing combination is referred to as a "stage". All centrifugal pumps must have a "wet inlet", that is, there must be water in both the intake (inlet) pipe and the casing when the pump is started.

For more details visit us at: Centrifugal Pumps

Irrigation Pumps

More than 50 years of experience, workmanship and endurance took to design the superlatively efficient CRI Agriculture & Residential Pumpsets. Extreme engineering and tough quality control Irrigation Pumps ensure an efficient service always. Stanch determination helped CRI groups to lead the industry with 4000 plus channel partners and above 700 service centers.

For more details visit us at: Irrigation Pumps

Bore well Pumps

Borewell submersible pumpsets are built with impellers & diffusers made of thermo plastics and other vital components like check valve housing and suction inter connector which are made of graded cast iron, outer shell made of high quality stainless steel. The optimal design of impellers and diffusers offers best possible hydraulic efficiency.

For more details visit us at: Borewell Pumps

Open Well Pumps

C.R.I.'s horizontal and vertical open well submersible pumps are ideally suitable for open wells where there is a wide fluctuation in water level. This works under water and it rest at the bottom of the well. Pump portion is of single stage (horizontal pump) & single or multi stage (Vertical pump) and fitted with cast iron casing and impeller.

For more details visit us at: Open Well Pumps

Mini Pumps

The design of the motor comprise of a motor frame that is made of high quality material. Mini Pumps ensures high performance, an entire noise free operation and almost no heating up of the machine. You can also avail non-self priming pumps featuring radial delivery and end suction.

For more details visit us at: Mini Pump

Residential Pumps

C.R.I. Regenerative Selfpriming Monoblock pumpsets are with inbuilt check valve on the suction side and there is no need for foot valve. Pumpsets are powered by a totally enclosed fan cooled, AC induction two pole and four pole motors suitable for continuous duty. Motor stator is made of low watt loss steel lamination. Construction of motor frame and usage of quality materials result in high performance and low temperature raise, thereby increasing the life cycle of the motor.

For more details visit us at: Residential Pumps

Industrial Pumps

Industrial Pumps from CRI find applications not only in handling water but different types of fluids in Paper, Process and Pulp industries, Paint, Dyes and Chemical Industries, Mining and Metal Manufacturing Industries, Food & Beverage Industries, Textile industries, Power Industry, Machine Tool Industry apart from General Water supply.

For more details visit us at: Industrial Pumps

Mono Block Pumps

A Mono block pump is a pump in which all rotating parts are mounted on a common shaft. The main components of a Mono block pumps are Pump assembly and Motor assembly. Since there are 7% losses in belt driven sets and 3% losses in coupling driven sets hence to avoid these transmission losses Mono block pump sets evolved.

For more details visit us at: Monoblock Pumps

Sewage Pumps

These centrifugal pumps are ideally suitable for openwells or tanks where there is a wide fluctuation in water level. This works under water and it rests at bottom of the well. Hence suction and priming problem do not arise.

For more details visit us at: Sewage Pumps