Creo View 3.0 Curriculum Guide
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Creo View 3.0
Curriculum Guide
Live Classroom Curriculum Guide
Introduction to Creo View MCAD 3.0
Introduction to Creo View ECAD 3.0
Introduction to Creo View MCAD 3.0Overview
Course Code TRN-4280-T
Course Length 1 Day
In this course, you will learn about CreoView and its role as a visualization solutionfor Product Data Management systems.You will learn how to visualize products andnavigate through or query 3-D models, 2-Ddrawings, images, and documents. You willalso learn how to deconstruct models to viewhow components fit together. In addition, youwill learn how to create markups and saveannotation sets to communicate design ideasand problems. Finally, you will learn how tocreate construction geometry.At the end of each module, you will completea set of review questions to reinforce criticaltopics from that module. At the end of thecourse, you will complete a course assessmentin Pro/FICIENCY intended to evaluate yourunderstanding of the course as a whole.
Course Objectives• Introduction to visualization• Introduction to the Creo View user interface• Navigate and orient 3-D models• Query data and search for model components• Change model appearances• Work with model annotations• Generate a Bill of Materials• Explode model components• Assemble components
• Section models• Work with components and groups
• View 2-D drawings, images, and documents• Create markups and annotation sets
• Take measurements• Create construction geometry
Prerequisites
• None
Audience
• This course is intended for all enterprise data users who use the Creo View MCAD client. People inrelated roles will also benefit from taking this course.
Agenda
Day 1
Module 1 Introduction to Visualization
Module 2 Getting Around in Creo View
Module 3 Viewing and Interrogating Models
Module 4 Deconstructing a Creo View Model
Module 5 Working with Components
Module 6 Viewing Drawings, Images, and Documents
Module 7 Working with Markups and Annotation Sets
Module 8 Working with Construction Geometry
Course ContentModule 1. Introduction to Visualization
i. Identifying Visualization Conceptsii. Identifying Visualized Intellectual Property Typesiii. Visualization Use-Case Scenariosiv. Identifying Components in PTC's Visualization Systemv. Generating Creo View Viewablesvi. Identifying Readable Visualization Object Typesvii. Understanding Creo View File Typesviii. Understanding Creo View’s Basic Capabilitiesix. Understanding Creo View’s Advanced Capabilities
Knowledge Check Questions
Module 2. Getting Around in Creo Viewi. Understanding the Creo View User Interfaceii. Viewing Area User Interfaceiii. Understanding the Ribboniv. The Creo View File Menu User Interfacev. Quick Access Toolbar User Interfacevi. Primary Panel User Interfacevii. Understanding the Upper Data Panelviii. Understanding the Lower Data Panelix. Starting Creo View as a Standalone Clientx. Starting Creo View from Windchillxi. Loading Viewablesxii. Investigating Creo View Options
Knowledge Check Questions
Module 3. Viewing and Interrogating Modelsi. Visualizing and Interrogating a Creo View Modelii. Views Groupiii. Orienting the Modeliv. Selecting and Searching Componentsv. Selecting Componentsvi. Finding Componentsvii. Using Quick Searchviii. Searching Product Structureix. Color-Coded Searchx. Working with Search Resultsxi. Managing Queriesxii. Changing the Display of the Modelxiii. Rendering Options
xiv. Filtering Display and Other Itemsxv. Hiding and Unhiding Componentsxvi. Editing Component Display Attributesxvii. Working with Model Annotationsxviii. Generating a Bill of Materials
Knowledge Check Questions
Module 4. Deconstructing a Creo View Modeli. Exploding Model Componentsii. Translating Exploded Componentsiii. Rotating Exploded Componentsiv. Capturing and Restoring Component Locationv. Preset Explodevi. Smart Explodevii. Working with Smart Explode Selectionviii. Setting the Smart Explode Directionix. Changing Smart Explode Optionsx. Saving and Exiting Smart Explodexi. Assembling Componentsxii. Sectioning an Assemblyxiii. Orienting the Sectioning Planexiv. Manipulating the Sectioning Viewxv. Advanced Sectioning Featuresxvi. Creating Quarter Cut Sectionsxvii. Capping the Sectionxviii. Setting Specific Components to Be Sectioned
Knowledge Check Questions
Module 5. Working with Componentsi. Product Structure Versus Model Partsii. Working with Model Parts Context-Sensitive Menuiii. Working with the Model Parts Tabiv. Working with Structure Context-Sensitive Menusv. Working with the Structure Tabvi. Navigating to Parts Using the Structure Tree Groupvii. Collecting and Isolating Multiple Partsviii. Working with Viewsix. Working with Static Groupsx. Working with Search Groups
Knowledge Check Questions
Module 6. Viewing Drawings, Images, and Documentsi. Opening Non-Model Files with Creo View
ii. Viewing Drawingsiii. Viewing Imagesiv. Orienting Drawings and Imagesv. Working with Pages and Sheetsvi. Viewing Documentsvii. Working with Documents
Knowledge Check Questions
Module 7. Working with Markups and Annotation Setsi. Marking Up Creo View Viewablesii. Adding Annotation Objectsiii. Notes and Reference Note Annotationsiv. Leader Line Annotationsv. Shape Annotationsvi. Freehand Annotationsvii. GTOL Annotationsviii. Stamp Annotationsix. Annotating a Documentx. Taking Measurementsxi. Working with Annotation and Measurement Elementsxii. Picking a Target for Measurementsxiii. Measuring Lengthsxiv. Measuring Distancesxv. Measuring Anglesxvi. Measuring Diameter or Radiusxvii. Measuring Areaxviii. Measuring Mass Propertiesxix. Taking a Measurement Summaryxx. Taking an Envelope Measurementxxi. Creating Annotation Setsxxii. Saving Annotation Sets to a PDM Systemxxiii. Retrieving Annotation Sets from a PDM Systemxxiv. Saving and Retrieving Annotation Sets using a Standalone Client
Knowledge Check Questions
Module 8. Working with Construction Geometryi. Creating Construction Geometryii. Creating Construction Geometry Workflowiii. Working with Construction Geometry Elementsiv. Picking a Target for Construction Geometryv. Creating a Construction Pointvi. Creating a Construction Axis
vii. Creating a Construction Planeviii. Creating a Construction Coordinate Systemix. Creating a Construction Curvex. Creating a Construction Linexi. Saving and Loading Construction Geometryxii. Using Construction Geometry as a Referencexiii. Using Construction Geometry to Explode a Modelxiv. Using Construction Geometry to Section a Modelxv. Using Coordinate Systems to Project Distance Measurementsxvi. Working with Construction Geometry in Annotation Sets
Knowledge Check Questions
Introduction to Creo View ECAD 3.0Overview
Course Code TRN-4281-T
Course Length 1 Day
In this course, you will learn how to view andmanage ECAD design viewables using CreoView ECAD 3.0. You will learn how to navigatethrough PCB layouts and schematics; highlightand display components and attributes; andsearch for components. You will also learnhow to mark up Creo View ECAD viewablesand save your markups as annotation sets.Finally, you will learn how to compare ECADdesigns and view the differences using CreoView ECAD Validate.At the end of each module, you will completea set of review questions to reinforce criticaltopics from that module. At the end of thecourse, you will complete a course assessmentin Pro/FICIENCY intended to evaluate yourunderstanding of the course as a whole.
Course Objectives• Understand the Creo View ECAD user interface• Load and view design viewables• Search and find design components• Manage color and visibility of design
components• View design attributes• Cross-select between MCAD and ECAD
designs• Perform ECAD design measurements• Add annotation objects to ECAD designs• Compare ECAD designs using Creo View
ECAD and Creo View ECAD Validate• View design differences using Creo View ECAD
Prerequisites
• None
Audience
• This course is intended for end users who are viewing and managing ECAD designs viewables.People in related roles will also benefit from taking this course.
Agenda
Day 1
Module 1 Getting Around in Creo View ECAD
Module 2 Viewing and Interrogating ECAD Designs
Module 3 Working with Measurements and Annotations
Module 4 Comparing ECAD Design Viewables
Course ContentModule 1. Getting Around in Creo View ECAD
i. Identifying Components in PTC's Visualization Systemii. Creo View ECADiii. Creo View ECAD Featuresiv. Understanding Creo View File Typesv. Understanding the Creo View ECAD User Interfacevi. The Viewing Areavii. Understanding the Ribbonviii. The Creo View File Menuix. The Quick Access Toolbarx. The Primary Panelxi. The Upper Data Panelxii. The Lower Data Panelxiii. Starting Creo View as a Standalone Clientxiv. Starting Creo View from Windchillxv. Creo View ECAD Licensingxvi. Setting Creo View Licensing Optionsxvii. Loading Viewablesxviii. Adding Multiple EDA Files to the Design Package
Knowledge Check Questions
Module 2. Viewing and Interrogating ECAD Designsi. Visualizing and Interrogating a Creo View Designii. View Tab and Partitionsiii. Selection Mode Functionalityiv. The Crosshair Featurev. Zooming ECAD Viewablesvi. Rotating and Flipping a PCB Layoutvii. Viewing Multiple Sheets in the Schematicviii. Opening Schematic Hierarchical Blocksix. Types of Searchesx. Searching for ECAD Objects and Attributesxi. Quick Searchxii. Finding Componentsxiii. Design Layer Color and Visibilityxiv. Changing the Color and Visibility of a Layerxv. Controlling the Appearance of Designsxvi. Viewing ECAD Attributesxvii. Viewing Attributes of Multiple Itemsxviii. Filtering ECAD Attributes
xix. Highlighting and Isolating Objectsxx. The Highlight Featurexxi. The Isolate Featurexxii. Cross-Selection Between ECAD and MCADxxiii. Cross-Select Modexxiv. Objects Available for Cross-Selection
Knowledge Check Questions
Module 3. Working with Measurements and Annotationsi. Marking Up Creo View Viewablesii. Adding Annotation Objectsiii. Note and Reference Note Annotationsiv. Leader Line Annotationsv. Shape Annotationsvi. Freehand Annotationsvii. Stamp Annotationsviii. Taking Measurementsix. ECAD Objects Eligible for Measurementsx. Working with Annotation and Measurement Elementsxi. Measuring Distancexii. Measuring Minimum Gapxiii. Measuring Conductive Pathxiv. Taking a Measurement Summaryxv. Creating Annotation Setsxvi. Saving and Retrieving Annotation Sets Using a Standalone Clientxvii. Saving Annotation Sets to a PDM Systemxviii. Retrieving Annotation Sets from a PDM System
Knowledge Check Questions
Module 4. Comparing ECAD Design Viewablesi. Creo View ECAD Compare and Creo View ECAD Validateii. Creo View ECAD Compare — Featuresiii. The Creo View ECAD Compare Interfaceiv. Input Format and EDA Filesv. Design Comparison Optionsvi. Comparing Boardsvii. Selecting a Net Match Optionviii. Setting Schematic Sheet Range Optionsix. Comparing Layersx. The Comparison Configuration Filesxi. Results Filesxii. Setting Up the Review
xiii. The Creo View ECAD Validate Interfacexiv. Getting Transaction Detailsxv. Working with Transactionsxvi. Using Advanced Filtering on Transactionsxvii. Adding a Transaction Notexviii. Viewing Transaction Historyxix. Communicating with External Toolsxx. Previewing Transactionsxxi. Cross-selecting Transactionsxxii. Status of Transactions
Knowledge Check Questions
Web Based Curriculum Guide
Introduction to Creo View MCAD 3.0
Introduction to Creo View ECAD 3.0
Introduction to Creo View MCAD 3.0Overview
Course Code WBT-4280-0
Course Length 8 Hours
In this course, you will learn about CreoView and its role as a visualization solutionfor Product Data Management systems.You will learn how to visualize products andnavigate through or query 3-D models, 2-Ddrawings, images, and documents. You willalso learn how to deconstruct models to viewhow components fit together. In addition, youwill learn how to create markups and saveannotation sets to communicate design ideasand problems. Finally, you will learn how tocreate construction geometry.At the end of each module, you will completea set of review questions to reinforce criticaltopics from that module. At the end of thecourse, you will complete a course assessmentin Pro/FICIENCY intended to evaluate yourunderstanding of the course as a whole.
Course Objectives• Introduction to visualization• Introduction to the Creo View user interface• Navigate and orient 3-D models• Query data and search for model components• Change model appearances• Work with model annotations• Generate a Bill of Materials• Explode model components• Assemble components
• Section models• Work with components and groups
• View 2-D drawings, images, and documents• Create markups and annotation sets
• Take measurements• Create construction geometry
Prerequisites
• None
Audience
• This course is intended for all enterprise data users who use the Creo View MCAD client. People inrelated roles will also benefit from taking this course.
Table of ContentsModule 1 Introduction to Visualization
Module 2 Getting Around in Creo View
Module 3 Viewing and Interrogating Models
Module 4 Deconstructing a Creo View Model
Module 5 Working with Components
Module 6 Viewing Drawings, Images, and Documents
Module 7 Working with Markups and Annotation Sets
Module 8 Working with Construction Geometry
Introduction to Creo View ECAD 3.0Overview
Course Code WBT-4281-0
Course Length 8 Hours
In this course, you will learn how to view andmanage ECAD design viewables using CreoView ECAD 3.0. You will learn how to navigatethrough PCB layouts and schematics; highlightand display components and attributes; andsearch for components. You will also learnhow to mark up Creo View ECAD viewablesand save your markups as annotation sets.Finally, you will learn how to compare ECADdesigns and view the differences using CreoView ECAD Validate.At the end of each module, you will completea set of review questions to reinforce criticaltopics from that module. At the end of thecourse, you will complete a course assessmentin Pro/FICIENCY intended to evaluate yourunderstanding of the course as a whole.
Course Objectives• Understand the Creo View ECAD user interface• Load and view design viewables• Search and find design components• Manage color and visibility of design
components• View design attributes• Cross-select between MCAD and ECAD
designs• Perform ECAD design measurements• Add annotation objects to ECAD designs• Compare ECAD designs using Creo View
ECAD and Creo View ECAD Validate• View design differences using Creo View ECAD
Prerequisites
• None
Audience
• This course is intended for end users who are viewing and managing ECAD designs viewables.People in related roles will also benefit from taking this course.
Table of ContentsModule 1 Getting Around in Creo View ECAD
Module 2 Viewing and Interrogating ECAD Designs
Module 3 Working with Measurements and Annotations
Module 4 Comparing ECAD Design Viewables
Related Documents
