1 Creo 5.0 Installation By: Dr. Herli Surjanhata Before you install, you must have NJIT VPN as shown below, Activate VPN – see figure below. Click Connect and enter your UCID and Password. Click OK. Now you are connected to webvpn.njit.edu and start to install Creo 5.0 Download Creo 5.0 file and if necessary unzip it to destination folder. Navigate to installation folder,
13
Embed
Creo 5.0 Installation - New Jersey Institute of Technology 5.0 Installation.pdf · Creo 5.0 Installation By: Dr. Herli Surjanhata Before you install, you must have NJIT VPN as shown
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Creo 5.0 Installation
By: Dr. Herli Surjanhata
Before you install, you must have NJIT VPN as shown below,
Activate VPN – see figure below.
Click Connect and enter your UCID and Password.
Click OK.
Now you are connected to webvpn.njit.edu and start to install Creo 5.0
Download Creo 5.0 file and if necessary unzip it to destination folder.
Navigate to installation folder,
2
Right-click setup.exe of Creo 5.0 and select Run as administrator.
The PTC Installation Assistant dialog box appears.
3
Click
4
Be sure to check and see below.
and then click .
5
Under License Summary section.
Enter [email protected] for Source. The installation will connect to the license server and