Crawler Excavator R 980 SME Motor: 420 kW / 571 HP Stage IV / Tier 4f Operating weight: Backhoe: 95,900 – 97,600 kg Shovel: 99,500 – 101,200 kg Bucket Capacity: Backhoe: 5.20 – 6.80 m 3 Shovel: 4.40 – 6.50 m 3
Crawler ExcavatorR 980 SME
Motor:420 kW / 571 HP
Stage IV / Tier 4f
Operating weight:Backhoe: 95,900 – 97,600 kgShovel: 99,500 – 101,200 kg
Bucket Capacity:Backhoe: 5.20 – 6.80 m3
Shovel: 4.40 – 6.50 m3
2 R 980 SME Litronic
Crawler Excavator R 980 SME Litronic Super Mass Excavation
Silent and comfortable cab
• To date, the largest and quietest cab in its category
• Mounted on visco-elastic elements to absorb vibrations
• Impact-resistant front window and roof window
• Pneumatic suspension seat, heated, multidirectional (air-conditioned optional)
• Large colour touch screen with high resolution display
• Elevated cab for improved visibility of loading area
Accessible and protected uppercarriage
• Left and right walkways as standard and large walkways with optional guardrails
• Platform with access to engine and hydraulic compartments for ergonomic and safe servicing
• Refined design for extended visibility• New engine which conforms to
Phase IV / Tier 4 final standards• Heavy counterweight for enhanced stability
and better performance
3R 980 SME Litronic
Resized attachments
• Reinforced welded structure• Larger kinematics components• Integrated protection under the
dipper stick as standard• Extra protection available (below the boom,
cylinders of boom and bucket)
Robust undercarriage
• Fitted with excavator components from the next size up machine
• Track pads with 2 chamfered ribs for improved manoeuvrability on rough terrain
• Cast sprocket wheel with double tooth segment for longer life
• Dual-pivot carrier rollers for increased reliability and long-term durability
• Reinforced protection of travel drive for increased resistance against wear on hard and abrasive rock
Increased productivity
• HD bucket, up to 6.8 m3 for density of 1.8 t / m3
• Digging and breakout forces increased to over 10 %
4 R 980 SME Litronic
Attachments with no compromises
• Cast steel elements• Parallel kinematics for powerful and
constant penetration• Bucket cylinders positioned under the
attachments for better protection• Safety valves for hose ruptures of boom
cylinders
Robust undercarriage
• Fitted with excavator components from the next size up machine
• Track pads with 2 chamfered ribs for improved manoeuvrability on rough terrain
• Cast sprocket wheel with double tooth segment for longer life
• Dual-pivot carrier rollers for increased reliability and long-term durability
• Reinforced protection of travel drive for increased resistance against wear on hard and abrasive rock
Long Live Progress with the R 980 SME Shovel
5R 980 SME Litronic
Silent and comfortable cab
• Elevated cab for improved visibility of loading area (optional)
• To date, the largest and quietest cab in its category
• Mounted on visco-elastic elements to absorb vibrations
• Impact-resistant front window and roof window
• Pneumatic suspension seat, heated, multidirectional (air-conditioned optional)
• Large colour touch screen with high resolution display
Accessible and protected uppercarriage
• Left and right walkways as standard and large walkways with optional guardrails
• Platform with access to engine and hydraulic compartments for ergonomic and safe servicing
• Refi ned design for extended visibility• New engine which conforms to
Phase IV / Tier 4 fi nal standards• Heavy counterweight for enhanced stability
and better performance
6 R 980 SME Litronic
Technical Data
Swing DriveDrive Liebherr swashplate motor with integrated brake
valvesTransmission Liebherr compact planetary reduction gearSwing ring Liebherr, sealed race ball bearing swing ring,
internal teethSwing speed 0 – 5.9 RPM steplessSwing torque 295 kNmHolding brake wet multi-disc (spring applied, pressure released)
Hydraulic SystemHydraulic pump
for attachment and travel drive
two Liebherr variable flow, swashplate pumps
Max. flow 2 x 498 l/min.Max. pressure 350 bar
for swing drive reversible, variable flow, swashplate pump, closed-loop circuit
Max. flow 315 l/min.Max. pressure 350 bar
Pump regulation electro-hydraulic with electronic engine speed sensing regulation, flow compensation, automatic oil flow optimizer
Hydraulic tank 536 lHydraulic system 1,134 lHydraulic oil filter 2 full flow filters in return line with integrated fine filter
area (5 µm)Cooling system cooler for transmission pump oil and cooler for oil and
condenser of air-conditioning with hydrostatically con-trolled fan drives
MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum digging performance and heavy-duty jobs
RPM adjustment stepless adjustment of engine output via RPM at each selected mode
Tool Control 10 preadjustable pump flows and pressures for add-on tools
EngineRating per ISO 9249 420 kW (571 HP) at 1,800 RPMTorque 2,989 Nm at 1,300 RPMModel Liebherr D9508 A7 SCRType 8 cylinder V engine
Bore / Stroke 128 / 157 mmDisplacement 16.16 l
Engine operation 4-stroke diesel Common-Rail
Exhaust gas treatment SCR system (Selective Catalytic Reduction) emission standard stage IV / Tier 4f
Cooling system water-cooled and integrated motor oil cooler, after-cooled and fuel cooled
Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements
Fuel tank 1,498 lUrea tank 180 lElectrical system
Voltage 24 VBatteries 2 x 180 Ah / 12 VStarter 24 V / 7.8 kWAlternator three-phase current 28 V / 140 AEngine idling sensor controlled
Motor management connection to the integrated excavator system con-trolling via CAN-BUS to the economical utilisation of the service that is available
Hydraulic ControlsPower distribution via control valves in single block with integrated safety
valvesFlow summation to boom and stickClosed-loop circuit for uppercarriage swing drive
Servo circuit electro-hydraulic controlAttachment and swing proportional via joystick leversTravel – proportional via foot pedals or removable hand levers
– speed pre-selectionAdditional functions via foot pedals or joystick toggle switch
R 980 SME Litronic 7
Operator’s CabCab work headlights integrated in the ceiling, a door with
a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder
Operator’s seat Liebherr-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat damping including consoles and joysticks. Seat and armrests adjustable separately and in combination, seat heating as standard
Control system arm consoles, swinging with the seatOperation and displays large high resolution colour display with selfexplana-
tory operation via touchscreen, video, versatile adjust-ing, control and monitoring facilities, e.g. climate con-trol, implement and tool parameters
Air-conditioning standard automatic air-conditioning, ambient air func-tion, fast de-icing and demisting at the press of a button, air vents can be operated via a menu. Ambient air and fresh air filters can be easily replaced and are accessible from the outside. Heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures
UndercarriageS-HD gauge 3,600 mmDrive Liebherr swashplate motors with integrated brake
valves on both sidesTransmission Liebherr planetary reduction gearsTravel speed low range – 2.6 km/h
high range – 3.7 km/hNet drawbar pull on crawler 645 kNTrack components BMP280, maintenance-freeTrack rollers / Carrier rollers 8 / 2Tracks sealed and greasedTrack pads double grouserHolding brake wet multi-disc (spring applied, pressure released)Brake valves outside the travel motorLashing eyes integrated
AttachmentType combination of resistant steel plates and cast steel
componentsHydraulic cylinders Liebherr cylinders with special seal-system, shock
protectionBearings sealed, low maintenanceLubrication automatic central lubrication system (except link and
tilt geometry)Hydraulic connections pipes and hoses equipped with SAE split-flange
connectionsBucket standard equipped with Liebherr tooth system
8 R 980 SME Litronic
Dimensions
A2A1
A
P
S
N
K
L
U
Z
V
X
W
H
E
D
BG
R0021.02
Q
C
mmA 3,565A1 4,355A2 4,730C 3,935 / 4,130*D 4,515E 4,640H 3,965K 1,860L 4,810P 1,715Q 810S 3,600U 6,095N 500 600 750B 4,465 4,465 4,465G 4,845 4,845 4,845Z 7,565
* with FOPS top guard
Mono boom SME 7.20 m Stick length SME 2.90 m mmV 8,600W 5,250X 13,800
Mono boom SME 7.20 m Stick length SME 3.30 m mmV 8,400W 5,400X 13,450
R 980 SME Litronic 9
A2A1A
P
SN
K
LU
ZVX
WH
ED
BG
R0020.02
Q
C
mmA 3,565A1 4,355A2 4,730C 4,735 / 4,930*D 4,515E 4,640H 3,965K 1,860L 4,810P 1,715
* with FOPS top guard
mmQ 810S 3,600U 6,095N 500 600 750B 4,465 4,465 4,465G 4,845 4,845 4,845Z 7,565V 11,100W 4,600X 13,800
10 R 980 SME Litronic
Backhoe Bucketwith Mono Boom SME 7.20 m
Digging Envelope1 2
Stick length m 2.90 SME
3.30 SME
Max. digging depth m 7.30 7.70Max. reach at ground level m 12.30 12.65Max. dumping height m 8.60 8.75Max. teeth height m 12.70 12.85
Buckets Machine stability per ISO 10567* (75 % of tipping capacity)
Cutt
ing
wid
th
Capa
city
IS
O 74
51
Wei
ght
S-HD-Undercarriage SME-Attachment
Stick length (m)
mm m3 kg 2.90 3.30
HD1) 2,300 6.20 6,500 v y
2,450 6.80 6,800 y v
HDV2
) 2,300 5.20 7,200 v v
2,300 5.70 7,300 v y
2,300 6.30 7,600 y v
* Indicated loads are based on ISO 10567, at maximum reach, and may be swung 360° on firm and even ground1) HD bucket with teeth Z 90 (appropriate for materials above classification 6, according to VOB, Section C, DIN 18300)2) HDV bucket with teeth Z 90 (appropriate for materials above classification 6, according to VOB, Section C, DIN 18300)Other backhoes available on request
Max. material weight v = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.65 t/m3
0 m1
0
-1
-3
-2
-4
-5
-6
-7
-8
-9
11
10
9
13
14
12
8
7
6
5
4
3
2
1
0
-5
-10
-15
-20
-25
35
30
mR0023.02
ft
40
45
25
20
15
10
5
2345
51015202530354045
67891011121314
0 ft
12
Operating Weight and Ground PressureThe operating weight includes the basic machine with mono boom SME 7.20 m, stick SME 2.90 m and HD bucket 6.20 m3 (6,500 kg).
Undercarriage S-HDPad width mm 500 600 750Weight kg 95,900 96,600 97,600Ground pressure kg/cm2 1.82 1.53 1.24
Digging Forces1 2
Digging force ISO kN 426 394t 43.4 40.2
Breakout force ISO kN 506 506t 51.6 51.6
R 980 SME Litronic 11
Lift Capacitieswith Mono Boom SME 7.20 m
Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacityThe load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,400 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.
Stick SME 2.90 m
m
Under- carriage
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m
m
10.5 S-HD 23.1* 23.1* 6.8
9.0 S-HD 21.3* 21.3* 21.3* 21.3* 8.2
7.5 S-HD 21.7* 21.7* 20.5* 20.5* 20.5* 20.5* 9.2
6.0 S-HD 27.7* 27.7* 23.3* 23.3* 20.8* 20.8* 18.1 20.1* 9.8
4.5 S-HD 31.8* 31.8* 25.3* 25.3* 20.4 21.7* 16.7 20.0* 10.2
3.0 S-HD 25.7 27.2* 19.7 22.7* 16.0 20.1* 10.3
1.5 S-HD 34.0 36.5* 24.7 28.3* 19.1 23.2* 15.9 20.1* 10.2
0 S-HD 33.4 36.0* 24.2 28.3* 18.8 23.0* 16.5 20.2* 9.9
– 1.5 S-HD 42.7* 42.7* 33.3 33.9* 24.0 27.0* 18.7 21.3* 18.0 20.1* 9.3
– 3.0 S-HD 43.9* 43.9* 37.0* 37.0* 29.8* 29.8* 23.5* 23.5* 19.5* 19.5* 8.4
– 4.5 S-HD 27.8* 27.8* 22.3* 22.3* 17.4* 17.4* 7.0
Stick SME 3.30 m
m
Under- carriage
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m
m
10.5 S-HD 21.3* 21.3* 7.3
9.0 S-HD 20.0* 20.0* 19.9* 19.9* 8.7
7.5 S-HD 20.7* 20.7* 19.4* 19.4* 19.2 19.3* 9.6
6.0 S-HD 26.4* 26.4* 22.4* 22.4* 20.0* 20.0* 17.1 19.1* 10.2
4.5 S-HD 30.6* 30.6* 24.5* 24.5* 20.5 21.1* 16.0 19.1* 15.8 19.0* 10.6
3.0 S-HD 34.3* 34.3* 25.8 26.6* 19.8 22.2* 15.6 19.4* 15.2 19.1* 10.7
1.5 S-HD 34.3 36.2* 24.8 27.9* 19.1 22.9* 15.3 19.4* 15.1 19.3* 10.6
0 S-HD 33.5 36.2* 24.2 28.3* 18.7 23.0* 15.6 19.4* 10.3
– 1.5 S-HD 42.4* 42.4* 33.2 34.6* 23.9 27.3* 18.5 21.9* 16.9 19.4* 9.7
– 3.0 S-HD 42.6* 42.6* 39.3* 39.3* 31.1* 31.1* 24.0 24.6* 19.1* 19.1* 8.8
– 4.5 S-HD 31.0* 31.0* 24.7* 24.7* 17.8* 17.8* 7.5
12 R 980 SME Litronic
Front Shovel
Digging EnvelopeMax. reach at ground level 9.35 mMax. dumping height 8.00 mMax. crowd length 3.90 mBucket opening width T 1,825 mm
Max. crowd force 690 kN / 70.4 tMax. crowd force at ground level 490 kN / 50.0 tMax. breakout force 500 kN / 51.0 t
Operating Weight and Ground PressureThe operating weight includes the basic machine with cab elevation 800 mm, shovel attachment SME and front shovel 6.00 m3 (10,700 kg), level II.
Undercarriage S-HDPad width mm 500 600 750Weight kg 99,500 100,200 101,200Ground pressure kg/cm2 1.89 1.59 1.28
Front Shovels
Cutt
ing
wid
th
Capa
city
IS
O 74
51
Wei
ght
Wea
r kit
leve
l
S-HD-Undercarriage
Shovel Attachmentmm m3 kg
2,300 4.40 8,310 II v
2,300 4.40 9,160 III v
2,700 5.10 8,450 I v
2,700 5.10 9,100 II v
2,700 5.10 10,150 III v
2,700 5.40 10,600 III v
2,700 5.60 8,750 I v
2,700 5.60 9,450 II v
2,700 5.60 10,600 III v
2,700 6.00 9,950 I v
2,700 6.00 10,700 II y
2,700 6.00 11,950 III y
3,150 6.50 10,750 I y
3,150 6.50 11,600 II v
3,150 6.50 12,900 III y
Level I: For non-abrasive materials, such as limestone without flint inclusion, shot material or easily breakable rock, i.e., deteriorated rock, soft limestone, shale, etc.Level II: For pre-blasted heavy rock, or deteriorated, cracked material (classification 3 to 4, according to DIN 18300)Level III: For highly-abrasive materials such as rock with a high silica content, sandstone etc.
Max. material weight v = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.65 t/m3, y = ≤ 1.5 t/m3
0 m1
0
-1
-3
-4
-2
11
12
13
10
9
8
7
6
5
4
3
2
1
0
-5
-10
35
40
30
mR0024.02
ft
25
20
15
10
5
2345
5101520253035
67891011
0 ft
T
R 980 SME Litronic 13
Dimensions and Weights
Basic MachineTrack pads mm 500 600 750Weight with backhoe attachment and S-HD-undercarriage without counterweight kg
56,400
57,050
58,100
Weight with shovel attachment and S-HD-undercarriage without counterweight kg
56,500
57,150
58,200
Basic MachineV3 mm 10,200W3 mm 4,300X3 mm 11,850
Cab Elevation 800 mm
L Length mm 1,890H Height mm 925 Width mm 1,370 Weight kg 600
Upper Protection ScreenL Length mm 1,960H Height mm 190 Width mm 1,110 Weight kg 75
CounterweightL Length mm 775H Height mm 1,595 Width mm 3,360 Weight kg 16,000
Hoist Cylinders (two)L Length mm 2,920H Height mm 550 Width mm 400 Weight kg 2 x 1,050
Mono Boom with Stick CylinderStick length m 7.20L Length mm 7,550H Height mm 2,700 Width mm 1,460 Weight kg 10,000
R0022.02
R0022.02L
H
R0022.02
L
H
R0022.02L
H
R0022.02
V3
W3
X3
R0022.02
L
H
R0022.02
L
H
14 R 980 SME Litronic
Stick with Bucket CylinderStick length m 2.90 3.30L Length mm 4,050 4,450H Height mm 1,700 1,650 Width mm 900 900 Weight kg 4,900 5,100
Shovel BoomL Length mm 4,950H Height mm 2,050 Width mm 1,650 Weight without crowd cylinder kg 7,300 Weight crowd cylinder kg 2 x 450
Shovel StickL Length mm 3,660H Height mm 1,300 Width mm 1,800 Weight kg 4,650
Shovel Bucket Cylinders (two)L Length mm 3,050Ø Diameter mm 450 Width mm 450 Weight kg 2 x 625
Front ShovelsCutting width mm 2,300 2,700 2,700 2,700 2,700 3,150 Capacity m3 4.40 5.10 5.40 5.60 6.00 6.50L Length mm 2,600 2,600 2,840 2,800 2,800 2,800H Height mm 2,700 2,700 2,840 2,700 2,700 2,700 Width mm 2,350 2,700 2,700 2,700 2,700 3,150 Weight Level I kg – 8,450 – 8,750 9,950 10,750 Level II kg 8,310 9,100 – 9,450 10,700 11,600 Level III kg 9,160 10,150 10,600 10,600 11,950 12,900
Dimensions and Weights
Backhoe Buckets HD
Cutting width mm 2,300 2,450 Capacity m3 6.20 6.80L Length mm 2,850 2,850H Height mm 2,050 2,050 Width mm 2,500 2,500 Weight kg 6,500 6,800
Backhoe Buckets HDV
Cutting width mm 2,300 2,300 2,300 Capacity m3 5.20 5.70 6.30L Length mm 2,550 2,600 2,850H Height mm 2,050 2,050 2,050 Width mm 2,350 2,350 2,450 Weight kg 7,200 7,300 7,600
R0022.02
L
H
R0022.02
L
H
R0022.02
L
H
R0022.02
L
H
R0022.02
L
H
R0022.02
L
H
R0022.02
L
Ø
Shovel Hoist Cylinders (two)L Length mm 2,920H Height mm 550 Width mm 450 Weight kg 2 x 1,100R0022.02
L
H
R 980 SME Litronic 15
Standard Equipment
Non-exhaustive list, please contact us for further information.
* optionally extendable after one year
UndercarriageChain guide 2 piecesLashing eyeletsSprocket double-toothed with dirt ejectorSupporting rollers with double bearingsTrack pads, chamferedTrack rollers, lifetime-lubricatedTracks, sealed and greasedTravel gear support, reinforced
Operator’s Cab7" colour multifunction display with touchscreenAir conditioning, automaticCamera for side area monitoringCigarette lighter and ashtrayCoat hookCup holderFuel consumption indicator on touchscreenHeadlights on cab, front, halogen, 2 piecesHydraulic suspensionImpact-resistant roof windowImpact-resistant 2 pieces windscreenInterior lightLiDAT Plus (Liebherr data transfer system) *Mechanical hour meters, readable from outside the cabOil level monitoring on touchscreenOperator seat Comfort with horizontal and vertical dampingPreparation for radio installationRain hood over front window openingRearview mirrorsRear view monitoring cameraRear window emergency exitRetractable seat belt 51 mmRoll-down sun blindRotation / boom lift priority adjustable on displayRubber floor matSliding windows in cab doorStorage binStorage spaceTinted windowsUrea tank level monitoring on touchscreenWiper / washer
AttachmentBoom cylinders oil regenerationBottom protection for stickHeadlights on boom, halogen, 2 pieces, protections includedLiebherr central lubrication system, fully-automatic (except connecting link for bucket kinematics)Load valve for stick cylinder (on distributor)Safety check valves for hoist and stick cylindersStick cylinder oil regeneration
UppercarriageEngine hood with two-part gas spring openingFuel tank cap lockable with padlockHandrailsHeadlights on uppercarriage, front, halogen, 2 pieces, protections includedHeavy counterweightInternal platform with access to engine and hydraulic compartmentsManual main switchSound insulationStorage box, lockableSwing brake lock, maintenance-freeTool set 29 piecesWalkway, both-sided
Hydraulic SystemDedicated swing circuitFilter with integrated fine filter areaLiebherr hydraulic oilPositive Control systemPressure storage for controlled lowering of equipment with engine turned offPressure test ports for hydraulicShut-off valve between hydraulic tank and pumpsWork mode selector
EngineCommon-Rail injection systemConform with stage IV / Tier 4f emission standardEngine idling, automatic, sensor-controlledFixed geometry turbo chargerFuel filter and water separatorIntercoolerLiebherr SCR technologyStepless adjustable engine speed
Options
Liebherr-France SAS 2 avenue Joseph Rey, B.P. 90287, FR-68005 Colmar Cedex S +33 389 21 30 30, Fax +33 389 21 37 93 www.liebherr.com, E-Mail: [email protected] www.facebook.com/LiebherrConstruction
Prin
ted
in G
erm
any
by E
berl
RG
-BK
-OT
LFR
/SP
122
0557
3-2-
09.1
6_en
GB
A
ll ill
ustr
atio
ns a
nd d
ata
may
diff
er fr
om s
tand
ard
equi
pmen
t. S
ubje
ct to
cha
nge
with
out n
otic
e. A
ll in
dica
ted
load
s ar
e ba
sed
in a
ccor
danc
e w
ith IS
O 9
248.
Options
UndercarriageChain guide 3 piecesChain guide full lengthProtection plate for wrecking ball operationReinforced cover and base plate for undercarriage centre sectionSpecial paintingTravel drive protection
Operator’s CabAcoustic travel alarm deactivatableAdditional headlights cab, front and / or rear, halogen or LED, 2 piecesAdjustable intensity headlights (LED)Amber beacon on cabinAuxiliary heater (programmable)Bottom windscreen wiperCool box (12 V)Electronic immobilizerEmergency stop button in cabFalling objects protection structure FOPSFire extinguisherFirst-aid boxFollow me home headlightsFootrestFront guard protection structure FGPS swivelableHandrests elevated for joysticksHeadlights on cab roof, front, LED, 2 piecesIntegral protection guard FGPS + FOPSLighting for cabin accessOperator seat Comfort with 4-points seat beltOperator seat Premium with integrated ventilationRadio ComfortRoof window wiperSpecial paintingSun visor
AttachmentBottom protection for boomCylinders check valveEyelet on boom and stickHeadlights on boom, LED, 2 piecesLiebherr bucket rangeLiebherr tooth systemLoad holding valve for bucket cylinderOverload warning devicePiston rod protection for hoist cylinder (backhoe)Piston rod protection for bucket cylinder (backhoe + shovel)Security for hoist cylindersSpecial painting
UppercarriageAutomatic tiltable access ladderCab elevationElectric socket for external start-up aid (24 V)Electric socket for urea filling station (24 V)Engine compartment lightingFine filter protection grid for radiatorLubrication line protection (swing ring)Reversible fan driveSkyView 360° cameraSpecial paintingStorage box with extended tool set 40 pieces (incl. toolbox)Swing drive protectionTank refilling pump fuelWalkway, wide version with guard railWiggins quick coupling for fuel
Hydraulic SystemBypass filter for hydraulic oilLiebherr hydraulic oil, adapted for extreme climate conditionsLiebherr hydraulic oil, biodegradablePreheating for hydraulic oil (240 V)
EngineAir pre-filter with dust trapAutomatic engine shut-down after idlingPreheating for fuel, coolant and engine oil (240 V)Wiggins quick coupling for engine oil
Non-exhaustive list, please contact us for further information.
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.