crate_cat

Fully Assembled Chevy And Ford CrAte enginesGet a brand new fully-assembled engine that’s virtually ready to run and delivers classic Edelbrock performance right out-of-the-box. Available in power levels from 310 hp to 697 hp, these engines include high-quality Edelbrock manifolds, cylinder heads, Thunder Series AVS carbs, Edelbrock fuel injection, cams and optional water pumps. Check out the complete descriptions on the following pages!

Brand New Short Block– Not Reconditioned

High Quality Edelbrock Aluminum Heads

Edelbrock Manifold – Made in USA

Precision Assembled in the UsA with high QUAlity comPonents Edelbrock heads, camshaft, water pump, top quality gaskets and Thunder Series carburetor top off the GM short block for great out-of-the-box performance. Only the best components such as MSD and ARP are utilized for the assembly of Edelbrock Crate Engines. Quality and care are used for each Edelbrock Crate Engine as they are hand built by dedicated team members.

High Quality MSD or Mallory Distributor

High quality MSD or Mallory distributor

and coilEdelbrock aluminum valve covers with custom badge

Industry-leading “Polished Package” option shown here

Edelbrock Crate Engines include our top-of-the-line carburetor… Thunder

Series AVS with adjustable secondaries (Performer Series carbs on street legal)

Available with Edelbrock Performer, Performer RPM,

Performer Air-Gap, RPM Air-Gap or Dual-Quad

manifolds or powerful

Edelbrock EFI

Order with or without an Edelbrock water pump (your choice of styles)

High-quality Edelbrock aluminum heads with swirl-polished stainless steel valves

All S/B Chevy engines include a new GM short block with 4-bolt mains

Performer RPM engines include Milodon

oil pan, oil pump and timing cover as well as

precision-machined forged crankshaft, powdered metal connecting rods

and hypereutectic pistons

Dyno-matched Performer, Performer Hydraulic Roller, Performer RPM

& Performer RPM Hydraulic Roller camshafts

Heavy-duty 8-inch harmonic balancer

Description page # Description page #

2

tAble oF Contents

FORD SMALL BLOCKPerformer RPM 9.9:1 - 438 HP ................................................................ 4Performer RPM DUAL-QUAD 9.9:1 - 449 HP ........................................... 4Performer 5.0L EFI 9.9:1 - 430 HP ........................................................... 5Performer RPM XT EFI 9.9:1 - 503 HP ..................................................... 5CHEVY - SMALL BLOCKPerformer 8.5:1 - 310 HP ......................................................................... 7Performer 9.0:1 - 320 HP ......................................................................... 7Performer Dual-Quad 9.0:1 - 315 HP ..................................................... 8Performer Hi-Torq Dual-Quad 9.0:1 - 363 HP ......................................... 8Performer Hi-Torq 9.0:1 - 363 HP ............................................................ 8Performer Pro-Flo XT EFI 9.0:1 - 380 HP ................................................ 9

Performer RPM 9.5:1 - 410 HP ................................................................ 9Performer RPM E-Tec 9.5:1 - 435 HP .................................................... 10Performer RPM E-Tec Pro-Flo 2 9.5:1 - 440 HP ................................... 10Performer RPM Pro-Flo XT EFI 9.5:1 - 440 HP ...................................... 11Hi-Torq 383 Pro-Flo XT EFI 9.5:1 - 408 HP............................................ 11Signature Series 383 9.5:1 - 460 HP ..................................................... 12E-Force RPM Supercharged 9.5:1 - 507 HP .....................................12-13CHEVY - BIG BLOCKEdelbrock/MUSI 555 XT Carb (665 HP) & EFI (697 HP) ........................ 13Edelbrock Crate Engine Components.................................................... 14Crate Engine Assembly .......................................................................... 15

3

Ford CrAte engines


EndurashinE

finish now

availablE!

Performer RPM Crate Engine #45264 Performer RPM Crate Engine #45373 Performer RPM XT EFI Crate Engine #45363

Performer RPM Dual-Quad Crate Engine #45464

AvAilAble horsePower levels 430 438 503

smAll-bloCk Ford® 347 C.i. CrAte enginesEdelbrock Ford crate engines are an exciting new addition to the popular Edelbrock crate engine line. These small-block Ford offerings are 100% brand new – no reconditioned parts – and deliver the quality and performance Edelbrock is known for.

The short-block assembly is all Ford Racing, including an 8.2” deck height, four-bolt main BOSS block, forged steel crankshaft, forged steel connecting rods and forged pistons. A 4.030” bore and 3.400” stroke combination is used to provide 347 cubic inches. Edelbrock technicians then complete each crate engine with the Total Power Package® combination of roller camshaft, Performer RPM or RPM Xtreme cylinder heads, RPM or RPM XT intake manifold and carburetors or EFI (see individual listings for cylinder head and fuel induction options). The finished package delivers broad torque and high-end horsepower.

Additional qualities include Edelbrock 1.6:1 roller rockers, Victor Series aluminum water pump, MSD® or Mallory® distributor and a Milodon oil pan. A two-year, unlimited mileage warranty is included and administered through Edelbrock. Edelbrock

provides its customers with personal choice options in finish (cast, polished or EnduraShine) and water pump and oil pan style. All Edelbrock crate engines are hand assembled by dedicated

Edelbrock technicians.

coming soon… 427 c.i.d. s/b Ford

boss crAte engine (9.5" windsor)

4

Ford CrAte engines

Performer RPM Crate Engine

#45264

Torque

Horsepower

Performer RPM Dual-Quad Crate Engine #45464

PerFormer rPm438 HP & 413 FT/LBS ToRquEEdelbrock’s RPM 347 small-block Ford crate engine offers the best of quality and performance. Ford supplies the foundation with a four-bolt main Ford Racing BOSS block, forged steel crankshaft, forged steel connecting rods and forged pistons. A 4.030" bore and 3.400" stroke combination is used to provide 347 cubic inches. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including Performer RPM heads, Rollin’ Thunder hydraulic roller camshaft, RPM Air-Gap intake manifold and Thunder Series AVS 800cfm carburetor. Customers can also choose finish options that include: as cast aluminum, polished or Edelbrock’s exclusive EnduraShine® finish. The assembly is finished off with a MSD distributor and Milodon oil pan. Additional options include the choice of front sump or rear sump oil pan.

Displacement: 347 cid (4.030" bore x 3.400" stroke)Horsepower: 438Torque: 413 ft/lbs.Compression: 9.9:1Block: Ford Racing Boss (8.2" deck height)Crankshaft: Forged steelPistons: ForgedCamshaft: Rollin’ Thunder Hydraulic Roller #2281Rocker Arms: 1.6:1 roller

Manifold: RPM Air-Gap #7521Cylinder Heads: Performer RPM #60259Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Elite SeriesFinish Options: As-cast, polished and EnduraShineWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

800 cfm thunder Series AVS carb finish options (electric choke) and Pro Billet distributor As-Cast Polished EnduraShine

Performer RPM 347 with front sump oil pan .................... #45260* ................#45261* .................#45264*Performer RPM 347 with rear sump oil pan ..................... #45270* ................#45271* .................#45274*Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

PerFormer rPm dUAl-QUAd449 HP & 417 FT/LBS ToRquEThis RPM 347 small-block Ford Dual-Quad crate engine offers the same combination of high quality, high performance goodies as its single quad sibling – but with the addition of an Edelbrock RPM Air-Gap Dual-Quad induction package. Ford supplies the foundation with a four-bolt main Ford Racing BOSS block, forged steel crankshaft, forged steel connecting rods and forged pistons. A 4.030" bore and 3.400" stroke combination is used to provide 347 cubic inches. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including Performer RPM heads, Rollin’ Thunder hydraulic roller camshaft, RPM Air-Gap Dual-Quad intake manifold with Thunder Series AVS 500cfm carburetors and progressive linkage. The assembly is finished off with a MSD distributor and Milodon oil pan. Additional options include the choice of front sump or rear sump oil.

Displacement: 347 cid (4.030" bore x 3.400" stroke)Horsepower: 449Torque: 417 ft/lbs.Compression: 9.9:1Block: Ford Racing Boss (8.2" deck height)Crankshaft: Forged steelPistons: ForgedCamshaft: Rollin’ Thunder Hydraulic Roller #2281Rocker Arms: 1.6:1 roller

Induction: RPM Air-Gap Dual-quad #75354Cylinder Heads: Performer RPM #602519Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Elite SeriesFinish: EnduraShineWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

500 cfm thunder Series AVS carbs EnduraShine and Pro Billet distributor finish

Performer RPM Dual-quad with front sump oil pan ......................................................................#45464*Performer RPM Dual-quad with rear sump oil pan .......................................................................#45474*Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

5

Ford CrAte engines

Torque

Horsepower

Performer 5.0L Crate Engine

#45373

Performer RPM Xt Efi Crate Engine #45363

PerFormer 5.0l eFi430 HP & 420 FT/LBS ToRquEGot a 5.0L and want a little more? We have the prescription for you. Edelbrock’s Performer RPM 347 small-block Ford crate engine is the ultimate replacement crate engine for Fox body Mustangs or any chassis wanting 347 cubic inches of fuel injected Ford power. The 347 cubic inch package is built from a four-bolt main Ford Racing BOSS block, forged steel crankshaft, forged steel connecting rods and forged pistons. A 4.030" bore and 3.400" stroke combination is used to provide 347 cubic inches. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including RPM Xtreme cylinder heads, RPM II EFI intake manifold, Rollin’ Thunder hydraulic roller camshaft and roller rocker arms. The RPM II 5.0L intake #71233, and RPM XT cylinder heads deliver high horsepower and broad torque. This package has a black coated intake and valve covers for a custom look. Includes #8840 Victor Series 5.0L water pump and rear sump oil pan. Fuel injectors not included. Will require factory computer to be re-calibrated. Calibration not included.

Displacement: 347 cid (4.030" bore x 3.400" stroke)Horsepower: 430Torque: 420 ft/lbs.Compression: 9.9:1Block: Ford Racing Boss (8.2" deck height)Crankshaft: Forged steelPistons: Forged Camshaft: Rollin’ Thunder Hydraulic Roller #2221

Rocker Arms: 1.6:1 rollerManifold: RPM II #71233Cylinder Heads: RPM Xtreme #51259Water Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Victor SeriesFinish: Black powder coatedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

Performer 347 with 5.0L RPM II Intake, RPM XT cylinder heads and rear sump oil pan; with black powder coated intake .............................................................#45373*Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

Displacement: 347 cid (4.030" bore x 3.400" stroke)Horsepower: 503Torque: 445 ft/lbs.Compression: 9.9:1Block: Ford Racing Boss (8.2" deck height)Crankshaft: Forged steelPistons: Forged Camshaft: Rollin’ Thunder Hydraulic Roller #2281

Rocker Arms: 1.6:1 rollerEFI System: Pro-Flo XT #35203Cylinder Heads: RPM Xtreme #51259Water Pump: Victor series aluminumDistributor: MalloryValve Covers: Cast aluminum – Victor SeriesFinish Options: Black powder coatedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

RPM XT 347 with XT Fuel Injection System, RPM XT cylinder heads and rear sump oil pan; with black powder coated intake .............................................................#45363*Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

PerFormer rPm xt eFi503 HP & 445 FT/LBS ToRquEFor the discerning Ford enthusiast who wants classic muscle and modern technology, Edelbrock’s RPM 347 small-block Ford crate engine with Pro-Flo XT fuel injection offers a complete package with powerful fuel injection. Ford supplies the foundation with a four-bolt main Ford Racing BOSS block, forged steel crankshaft, forged steel connecting rods and forged pistons. A 4.030" bore and 3.400" stroke combination provides 347 cubic inches. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including RPM Xtreme cylinder heads, Rollin’ Thunder hydraulic roller camshaft and roller rocker arms. The Pro-Flo XT EFI system is a complete package assembled with the all-new XT intake manifold, fuel injectors, fuel rails and front mount 90mm throttle body. The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from the driver’s seat with the included handheld calibration module. A Mallory® distributor, pre-terminated two-piece EFI harness, fuel pump, fuel filter, fuel hose, attaching hardware and software are also included. Edelbrock RPM XT cylinder heads and RPM roller camshaft are used for the ultimate head and cam combo. This package has a black coated intake and valve covers for a custom look. Includes #8841 Victor Series water pump and rear sump oil pan.

Chevy CrAte engines

6

Chevy CrAte engines

Get a brand new fully-assembled engine that’s virtually ready to run and delivers classic Edelbrock performance right out-of-the-box. Available in Power Levels from 310 hp to 697 hp, these engines include high-quality Edelbrock manifolds, cylinder heads, Thunder Series AVS carbs, cams and optional water pumps.

Edelbrock aluminum valve covers with custom badge

Available with Edelbrock Performer, Performer RPM,

Dual-Quad, Performer Air Gap, or RPM Air-Gap manifolds or

powerful Edelbrock EFI

Edelbrock Crate Engines now include our top-of-the-line carburetor… Thunder Series AVS

with adjustable secondaries (Performer Series carbs on street legal)


All S/B engines include a new GM short block with 4-bolt mains

Order with or without an Edelbrock water pump (your choice of styles)

Dyno-matched Performer, Performer Hydraulic Roller, Performer RPM & Performer RPM Hydraulic Roller camshafts

Heavy-duty 8-inch harmonic balancer

EndurashinE

and PolishEd

finishEs arE

availablE!

High quality MSD or Mallory ignition

Brand New Short Block– Not Reconditioned

High Quality Edelbrock Aluminum Heads

Edelbrock Manifold – Made in USA

Precision Assembled in the UsA with high QUAlity comPonents Edelbrock heads, camshaft, water pump and Thunder Series carburetor top off the GM short block for great out-of-the-box performance. Only the best components such as MSD and ARP are utilized for the assembly of Edelbrock Crate Engines. Quality and care are used for each Edelbrock Crate Engine as they are hand built by dedicated team members.

High Quality MSD or Mallory Distributor

Fully Assembled smAll-bloCk Chevy CrAte engines

Performer RPM engines

include Milodon oil pan, oil pump

and timing cover as well as precision-machined forged

crankshaft, powdered metal connecting rods

and hypereutectic pistons

Chevy CrAte engines

7

Chevy CrAte enginessmAll-bloCk

Performer 9.0:1 Crate Engine #45410

50-state legal option for pre-1980 Chevy/GMC vehicles

Performer EPS manifold, 650 cfm thunder Series AVS carb finish options (electric choke) and Pro Billet distributor As-Cast Polished

Without water pump .....................................................................................#45100* ....................#45101*With short water pump #8810 ......................................................................#45110* ....................#45111*With long water pump #8811 .......................................................................#45120* ....................#45121*

PerFormer 9.0:1320 HP & 382 FT/LBS ToRquEA step-up in the Performer line, the Performer 320 has 9.0:1 compression ratio and delivers 320 horsepower and 382 ft/lbs. of torque. The Performer 320 is 100% brand new and includes a four-bolt main GM short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Performer series intake manifold, Thunder Series AVS 650 cfm carburetor and optional water pump. Customers have their choice of Performer EPS or Performer Air-Gap intake manifolds, standard cast aluminum or polished finish and water pump style.

Displacement: 350 c.i.d. Horsepower: 320Torque: 382 ft/lbs.Compression: 9.0:1Block: New GM 4-bolt 2-piece rear main sealCrankshaft: Cast ironPistons: Cast aluminumCamshaft: Performer #2102Rocker Arms: 1.5:1 roller

Manifold: Performer EPS #2701 or Performer Air-Gap #2601Cylinder Heads: Performer #60909, #60899Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast Aluminum - Elite SeriesFinish Options: As-cast and polishedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

Performer EPS manifold and 650 cfm finish options thunder Series AVS (electric choke) As-Cast Polished


Performer Air-Gap manifold and 650 cfm finish options thunder Series AVS Series (electric choke) As-Cast Polished

Without water pump ................................................................#45500* .................. #45501*With short water pump #8810 .................................................#45510* .................. #45511*With long water pump #8811 ..................................................#45520* .................. #45521*

Performer manifold with EGR, street legal 600 cfm finish options Performer Series carb (electric choke) and HEi distributor As-Cast Polished

Without water pump ..................................................................................... #45300......................#45301With short water pump #8810 ...................................................................... #45310......................#45311With long water pump #8811 ....................................................................... #45320......................#45321

PerFormer 8.5:1310 HP & 375 FT/LBS ToRquEThese entry level small-block Chevy crate engines are ideal for any street rod, muscle car or truck owner looking for over 300 horsepower of performance on 87-octane fuel. The Performer 310 is 100% brand new and includes a four-bolt main GM short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Performer Series intake manifold and optional water pump. An optional 50-State emissions legal package is available for 1980 and earlier GM vehicles. A Thunder Series AVS 650cfm carburetor is included on non-emissions applications and a Performer Series 600cfm carburetor on the 50-State legal version. Customers have their choice of standard cast aluminum or polished finish and water pump style.


Manifold: Performer EPS #2701 or Performer EGR #3701Cylinder Heads: Performer #60759Carburetor: Performer Series or Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro Billet or street legal HEIValve Covers: Cast Aluminum - Elite SeriesFinish Options: As-cast and polishedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

8


Performer Dual-Quad

Crate Engine #45011

Performer Hi-toRQ

Dual-Quad 9.0:1 Crate Engine

#46304

PerFormer dUAl-QUAd315 HP & 372 FT/LBS ToRquEThis Performer Dual-Quad has the same specifications as the Performer 320 with the addition of an Edelbrock dual four barrel intake and 500 cfm carburetors. Customers have their choice of the classic C-26 intake for lower height and greater hood clearance or the latest generation Performer RPM Air-Gap Dual-Quad intake manifold. Additional options include standard cast aluminum or polished finish, EnduraShine (on RPM Air-Gap Dual-Quad) and water pump style.


Manifold: C-26 #5425 or RPM Air-Gap Dual-quad #75254Cylinder Heads: Performer RPM #60899Carburetor: Performer Series or Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast Aluminum - Elite SeriesFinish Options: As-cast, polished and EnduraShineWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

C-26 Dual-Quad manifold, (2) 500 cfm finish options Performer Series carbs (manual choke) As-Cast Polished EnduraShine

Without water pump ......................................................... #45000* ................#45001* .....................N/AWith short water pump #8810 .......................................... #45010* ................#45011* .....................N/AWith long water pump #8811 ........................................... #45020* ................#45021* .....................N/A

RPM Air-Gap Dual-Quad manifold, (2) 500 cfm thunder Series finish options AVS carbs (1 manual & 1 electric choke) As-Cast Polished EnduraShine

Without water pump ............................................................. N/A ........................N/A .....................#45004*With short water pump #8810 .............................................. N/A ........................N/A .....................#45014*With long water pump #8811 ............................................... N/A ........................N/A .....................#45024*

PerFormer 363 hi-torQ363 HP & 405 FT/LBS ToRquE SINGLE oR DuAL-quADTake advantage of modern cylinder head and camshaft technology with the Performer 363 Hi-Torq series of engines. These 350 cubic inch packages have a 9.0:1 compression ratio and deliver 363 horsepower and 405 ft/lbs. of torque. The Performer-Plus Rollin’ Thunder hydraulic roller camshaft is designed to deliver high horsepower and broad torque from off-idle through 5,500 RPM. In addition to the performance, the Rollin’ Thunder provides exceptional vacuum at idle so you can easily operate power brakes and vacuum powered accessories. Both are 100% brand new and include a four-bolt main GM short block and Edelbrock E-TEC 170 heads, Rollin’ Thunder hydraulic roller camshaft and roller rocker arms. Performer Hi-Torq features a Performer EPS intake manifold and Performer Series 750 cfm carburetor. Performer Hi-Torq Dual-Quad features Performer RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AVS carburetors with progressive throttle linkage. Customers have their choice of standard cast aluminum, polished, or EnduraShine finish and water pump style.

Displacement: 350 c.i.d. Horsepower: 363Torque: 405 ft/lbs.Compression: 9.0:1Block: New GM 4-bolt 2-piece rear main sealCrankshaft: Cast ironPistons: Cast aluminumCamshaft: Rollin’ Thunder Hydraulic Roller #2208Rocker Arms: 1.5:1 Roller

Manifold: Performer EPS Vortec #2716 or RPM Air-Gap Dual-quad Vortec #75264Cylinder Heads: E-Tec 170 #60979Carburetor: 750 cfm Performer or Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast Aluminum - Elite SeriesFinish Options: As-cast, polished and EnduraShineWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

Performer EPS Vortec manifold and 750 cfm finish options Performer Series carb (electric choke) As-Cast Polished EnduraShine

Without water pump ......................................................... #46400* ................#46401* .................#46404*With short water pump #8810 .......................................... #46410* ................#46411* .................#46414*With long water pump #8811 ........................................... #46420* ................#46421* .................#46424*

RPM Air-Gap Dual-Quad manifold, (2) 500 cfm thunder Series AVS carbs (1 manual and 1 electric choke) EnduraShine

Without water pump ......................................................................................................................#46304*With short water pump #8810 .......................................................................................................#46314*With long water pump #8811 ........................................................................................................#46324*

9


Performer Pro-flo Xt 9.0:1

Crate Engine #46603

Displacement: 350 c.i.d. Horsepower: 380Torque: 401 ft/lbs.Compression: 9.0:1Block: New GM 4-bolt 2-piece rear main sealCrankshaft: Cast ironPistons: Cast aluminumCamshaft: Rollin’ Thunder Hydraulic Roller #2208

Rocker Arms: 1.5:1 RollerEFI System: Pro-Flo XT #3528Cylinder Heads: E-Tec 170 #60979Throttle Body: Edelbrock #3869Distributor: MalloryValve Covers: Cast aluminum – style varies by applicationFinish Options: As-cast, polished and black powder coatedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

finish options Performer 380 with Pro-flo Xt fuel injection As-Cast Polished Black

Without water pump ......................................................... #46600* ................#46601* .................#46603*

PerFormer rPm 410410 HP & 408 FT/LBS ToRquEThe Performer RPM 410 delivers outstanding street high performance. This 100% brand new engine is built with a GM ZZ short block that includes forged steel crankshaft, powdered metal rods and hypereutectic pistons. The engine is then assembled with Edelbrock Total Power Package components, including Performer RPM heads, RPM hydraulic camshaft, roller rocker arms, RPM series intake manifold, Thunder Series AVS 800 cfm carburetor and optional water pump. Customers have their choice of Performer RPM or Performer RPM Air-Gap intake manifolds, standard cast aluminum or polished finish and water pump style.

Displacement: 350 c.i.d. Horsepower: 410Torque: 408 ft/lbs.Compression: 9.5:1Block: New “ZZ” 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Performer RPM #7102Rocker Arms: 1.5:1 Roller

Manifold: Performer RPM #7101 or RPM Air-Gap #7501Cylinder Heads: Performer RPM #60899Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Polished Race SeriesFinish Options: As-cast and polishedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

Performer RPM manifold, 800 cfm finish options thunder Series AVS carb (electric choke) As-Cast Polished


RPM Air-Gap manifold, 800 cfm thunder Series AVS carb (electric choke)


Polished Performer RPM

#45611

PerFormer 380 Pro-Flo xt eFi380 HP & 401 FT/LBS ToRquEFor those who want modern efficiency and power, Edelbrock offers the Performer 380 Pro-Flo XT. Like its carbureted sibling, this 350 cubic inch package offers 9.0:1 compression ratio, but thanks to the modern Pro-Flo XT EFI, delivers a stout 380 horsepower, 401 ft/lbs. of torque and increased mileage potential! The Performer 380 is 100% brand new and includes a four-bolt main GM short block, Edelbrock E-TEC 170 heads, Performer-Plus Rollin’ Thunder hydraulic roller camshaft, roller rocker arms, Pro-Flo XT EFI and optional water pump. The Pro-Flo XT EFI system is a complete package assembled with the all-new XT intake manifold, fuel injectors, fuel rails and front mount 90mm throttle body. The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from the driver’s seat with the included handheld calibration module. A Mallory® distributor, pre-terminated two-piece EFI harness, fuel pump, fuel filter, fuel hose, attaching hardware and software are also included. Customers have their choice of standard cast aluminum, polished, or black powder coated finish.

As-cast and polished Performer Crate Engines include Elite Series aluminum

valve covers with badge

10


Performer RPM E-tec #45904 with optional EnduraShine

finish

Displacement: 350 c.i.d. Horsepower: 435Torque: 435 ft/lbs.Compression: 9.5:1Block: New “ZZ" 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2204Rocker Arms: 1.5:1 Roller

Manifold: RPM Air-Gap Vortec #7516Cylinder Heads: E-Tec 170 #60979Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Elite SeriesFinish Options: As-cast, polished and EnduraShineWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

RPM Air-Gap manifold and 800 cfm finish options thunder Series AVS carb (electric choke) As-Cast Polished EnduraShine

Without water pump ......................................................... #45900* ................#45901* .................#45904*With short water pump #8810 .......................................... #45910* ................#45911* .................#45914*With long water pump #8811 ........................................... #45920* ................#45921* .................#45924*

PerFormer rPm e-tec 435435 HP & 435 FT/LBS ToRquEThe Performer RPM E-TEC 435 is the ultimate 350 cubic inch small-block Chevy for muscle cars, street rods and trucks. Qualities include: 100% brand new GM ZZ short block with forged steel crankshaft, powdered metal rods and hypereutectic pistons, Edelbrock E-TEC 170 heads, Rollin’ Thunder hydraulic roller camshaft, roller rocker arms, RPM Air-Gap intake manifold, Thunder Series AVS 800 cfm carburetor and optional water pump. Customers have their choice of standard cast aluminum, polished finish or EnduraShine finishes and water pump style.

Elite Series valve covers with optional EnduraShine finish

Performer RPM Pro-flo E-tec Efi System #35070

Displacement: 350 c.i.d. Horsepower: 440Torque: 425 ft/lbs.Compression: 9.5:1Block: New “ZZ" 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2205Rocker Arms: 1.5:1 Roller

EFI System: Performer RPM Pro-Flo 2 Sequential EFI #35070Cylinder Heads: E-Tec 170 #60979Water Pump: Victor series aluminumDistributor: MSD HEIValve Covers: Cast aluminum - Polished Race SeriesFinish Options: As-cast and polishedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

finish options Performer RPM with Pro-flo 2 fuel injection As-Cast Polished


PerFormer rPm e-tec Pro-Flo 2 eFi440 HP & 425 FT/LBS ToRquEThis fuel injected small-block has the same specifications of the RPM E-TEC 435 but is equipped with our powerful and efficient Pro-Flo 2 electronic fuel injection. Assembly begins with a brand NEW GM supplied ZZ short block featuring forged steel crankshaft, powdered metal connecting rods and pistons. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including E-TEC 170 cylinder heads, Rollin’ Thunder hydraulic roller camshaft and roller rocker arms. The Pro-Flo 2 EFI system is complete with intake manifold, fuel injectors, fuel rails and throttle body. The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from the driver’s seat with the included handheld calibration module. A MSD® distributor, wiring harness, fuel pump, fuel filter, fuel hose, attaching hardware and software are also included. The Pro-Flo 2 offers all the modern performance of fuel injection with the classic style of a four-blade throttle body that accepts a round top-mounted air-cleaner. Customers have their choice of as cast aluminum or polished finishes. Optional water pump styles are also available.

optional EnduraShine finish features Elite Series valve

covers and air cleaner

11


Performer RPM Pro-flo Xt Crate Engine #46900

Available in black powder coated finish with Victor Series valve covers

PerFormer rPm e-tec Pro-Flo xt eFi440 HP & 425 FT/LBS ToRquEWant the absolute latest in EFI performance in a turnkey crate engine package? The Performer RPM E-TEC 435 with Pro-Flo XT EFI delivers performance, function and style. GM supplies the foundation with a brand new four-bolt main ZZ block, forged steel crankshaft, powdered metal connecting rods and pistons. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including E-TEC 170 cylinder heads, Rollin’ Thunder hydraulic roller camshaft and roller rocker arms. Pro-Flo XT’s styling cues are striking, thanks to the proprietary intake design and large 90mm front mount throttle body. The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from the driver’s seat with the included handheld calibration module. A Mallory® distributor, pre-terminated two-piece EFI harness, fuel pump, fuel filter, fuel hose, attaching hardware and software are also included. This package delivers great drivability and increased mileage potential. Customers have their choice of as cast aluminum or black powder coated finishes. Optional water pump styles are also available.

Displacement: 350 c.i.d. Horsepower: 440Torque: 425 ft/lbs.Compression: 9.5:1Block: New “ZZ" 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2205

Rocker Arms: 1.5:1 RollerEFI System: Pro-Flo XT Sequential #3528Cylinder Heads: E-Tec 170 #60979Distributor: Mallory Valve Covers: Cast aluminum – style varies by applicationFinish options: As-cast and black powder coatedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

finish options Performer RPM E-tec with Pro-flo Xt fuel injection As-Cast Black

Without water pump .....................................................................................#46900* ....................#46903*

Torque

Horsepower

Displacement: 383 c.i.d. Horsepower: 408Torque: 450 ft/lbs.Compression: 9.5:1Block: GM ZZ383 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2209

Rocker Arms: 1.5:1 RollerEFI System: Pro-Flo XT #3528Cylinder Heads: Polished E-Tec 170 #60979Throttle Body: Edelbrock #3869Distributor: MalloryValve Covers: Cast aluminum – style varies by applicationFinish options: Polished and black powder coatedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

finish options Pro-flo Xt fuel injection with 90mm throttle body Polished Black

Without water pump .....................................................................................#46381* ....................#46383*

hi-torQ 383 Pro-Flo xt eFi408 HP & 450 FT/LBS ToRquEThis fuel injected 383 cubic inch small-block delivers horsepower, torque and increased mileage potential in street rods, muscle-cars or any demanding off-road vehicle. Starting with a GM Performance Parts GM ZZ383 short-block, this 383 cubic inch Chevy delivers 408 horsepower and a whopping 450 ft/lbs. of torque. The unique Rollin’ Thunder hydraulic roller camshaft delivers broad torque throughout the RPM range and up to 17" of vacuum at as low as 650 rpm! The ultra-modern Pro-Flo XT fuel injection system is complete with intake manifold, fuel injectors, fuel rails and throttle body, electronic engine control unit (ECU), easy-to-use handheld calibration module, distributor, pre-terminated two-piece EFI harness, and all necessary fuel system components. Additional qualities include: 100% brand new, GM ZZ383 short block with forged steel crankshaft, powdered metal rods and hypereutectic pistons, Edelbrock E-TEC 170 heads, Rollin’ Thunder hydraulic roller camshaft, roller rocker arms and Pro-Flo XT EFI intake manifold. Customers can choose black powder coated or polished finish. Short valve covers available upon request.

Includes Edelbrock red roller rocker arms

12


Displacement: 383 c.i.d. Horsepower: 460Torque: 460 ft/lbs.Compression: 9.5:1Block: GM ZZ383 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2207

Rocker Arms: 1.5:1 RollerManifold: RPM Air-Gap #75161Cylinder Heads: Polished E-Tec 200 #609819Carburetor: Thunder Series AVSWater Pump: Victor series aluminumDistributor: MSD Pro BilletValve Covers: Cast aluminum – Signature SeriesWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

RPM Air-Gap manifold, 800 cfm Thunder Series AVS carb (electric choke) MSD ignition wires, flexplate, dipstick and Champion spark plugs With water pump .................#46213*

signAtUre series 383460 HP & 460 FT/LBS ToRquEThis Signature Series 383 is truly a unique crate engine, designed for those with an appreciation for Edelbrock performance and collectability. This 383 cubic inch Chevy delivers 460 horsepower and 460 ft/lbs. of torque. Qualities include: 100% brand new, GM ZZ383 short block with forged steel crankshaft, powdered metal rods and hypereutectic pistons, Edelbrock E-TEC 200 heads, Rollin’ Thunder hydraulic roller camshaft, roller rocker arms, RPM Air-Gap intake manifold, Thunder Series AVS 800 cfm carburetor and short water pump. Unique to the SS383, the water pump and valve covers and air cleaner are styled with a black finish. The valve covers are then laser engraved with the Vic Edelbrock’s signature and the engines serial number. Only 250 will be made – get one while you still can.

includes laser-etched air cleaner top

E-Force RPM Supercharged

350 Crate Engine #46501 e-Force rPm sUPerchArged

507 HP & 487 FT/LBS ToRquEWant big-block power in a small package for your street rod or muscle car? The recipe is simple… take the proven 435HP RPM E-TEC, bolt on powerful E-TEC 200 cylinder heads and Edelbrock E-Force supercharger. This 350 cubic inch small-block Chevy is 100% brand new, built on a GM ZZ short block with forged steel crankshaft, powdered metal rods and hypereutectic pistons, includes Edelbrock E-TEC 200 heads, Rollin’ Thunder hydraulic roller camshaft, roller rocker arms, E-Force supercharger with 5 pounds of boost, Thunder Series AVS 800 cfm carburetor and water pump. The finished product produces 507 horsepower, 487 ft/lbs. of torque and performs on 91-octane pump gas. Customers have their choice of standard cast aluminum or polished finishes and water pump style.

Displacement: 350 c.i.d. Horsepower: 507Torque: 487 ft/lbs.Compression: 9.5:1Block: New “ZZ" 4-bolt 1-piece rear main sealCrankshaft: Forged steelPistons: HypereutecticCamshaft: Rollin’ Thunder Hydraulic Roller #2204

Rocker Arms: 1.5:1 RollerSupercharger: Edelbrock E-ForceCylinder Heads: E-Tec 200 #60989Carburetor: Thunder Series AVSDistributor: MSD Pro Billet Valve Covers: Cast aluminum - Polished Race SeriesFinish Options: As-cast and polishedWarranty: 2-year/unlimited mileage

SPECifiCAtioNS

finish options As-Cast Polished

Edelbrock E-Force Supercharger, 800 cfm Thunder Series AVS carb with electric choke (With long water pump #8811) .....................................#46500* ....................#46501*

Edelbrock E-Force Supercharger with short snout for E-Force Tru-Trac System, 800 cfm Thunder Series AVS carb with electric choke (With short water pump #8820) .....................................................................#46700*

featuring:

Cylinder Heads

13

Chevy CrAte enginesbig-bloCk

e-Force trU-trAc serPentine systemsEngineered to work exclusively with Edelbrock E-Force RPM Superchargers for the ultimate in looks and performance. CNC machined from 6061-T6 billet aluminum and polished to a mirror finish, they bolt right on and align perfectly without the need for stabilizer brackets or adjuster bars. They also increase the efficiency of the water pump, alternator and compressor by eliminating belt slippage. These complete systems include a polished Powermaster 105 amp 1-wire alternator, polished Sanden SD-7 AC compressor, a polished Edelbrock reverse rotation water pump, polished 6061-T6 billet aluminum pulleys and brackets, and optional Maval Manufacturing power steering pump with AN fittings. This is the ideal and best way for installing an Edelbrock E-Force Supercharger into a street rod or muscle car!With power steering pump for E-Force Supercharger for S/B Chevy ...........................................#1565Without power steering pump for E-Force Supercharger for S/B Chevy ......................................#1566

Important Notes: Recommended for use with Edelbrock E-Force crate engine #46700 and Edelbrock E-Force Supercharger Kits #15611, #15621, #15631 & #15641.

E-force tru-trac Belt System #1565 installed on an Edelbrock E-force Supercharged crate engine

edelbrocK/mUsi 555 rPm xtAVAILABLE CARBuRETED oR EFIThe Edelbrock 555 RPM XT is a powerful big cubic inch crate engine package that features the all new Edelbrock RPM Xtreme cylinder heads. The RPM Xtreme cylinder heads are CNC ported to achieve optimal air-flow for maximum horsepower and torque in high performance street and light duty racing applications. The key advantages of these cylinder heads are the increased air-flow for big power and the exhaust port exits are in the stock location, which allows the use of readily available off-the-shelf headers. This engine is 100% brand new and constructed of the highest quality components. The Edelbrock 555 RPM is available carbureted or with powerful Pro-Flo 2 electronic fuel injection. The carbureted package includes a Victor Jr. intake manifold and 800cfm Thunder Series AVS carburetor. The fuel injected option is complete with Pro-Flo 2 electronic fuel injection and is assembled with EFI intake manifold, fuel injectors, fuel rails and throttle body, electronic engine control unit (ECU), handheld calibration module, Mallory® distributor, complete harness, fuel pump, fuel filter, fuel hose, attaching hardware and software. This package is extremely tunable and offers superb drivability on the street. NOTE: This engine features exhaust port exits that are in the stock location and will accept off-the-shelf headers.

Displacement: 555 c.i.d. Horsepower: 676 (carb) / 6 97 (EFI)Torque: 649 ft/lbs. (carb) / 643 ft/lbs. (EFI)Compression: 10.0:1Block: Dart Big-M 9.8”Crankshaft: Scat Forged steel 4.250Pistons: ForgedCamshaft: Hydraulic Roller #2264

Rocker Arms: 1.7:1 RollerManifold: Victor Jr. 454-R #2902 or Victor Jr. EFICylinder Heads: RPM Xtreme #51559Carburetor: Thunder Series AVSEFI: Pro-Flo 2 #35220Distributor: MSD Pro-Billit (Carb), Mallory (EFI)Valve Covers: Cast aluminum Warranty: 2-year/unlimited mileage

SPECifiCAtioNS

Edelbrock/Musi 555 Crate Engine #46550 with Pro-flo 2Efi System

Assembled by 8-time Pro

Street World Champ Pat

Musi, this Chevy starts with a

new Dart Big M block

Edelbrock/MuSI 555 RPM XT Carbureted, 676 HP / 649 Tq (water pump not included) .................................................................................#49550*

Edelbrock/MuSI 555 RPM XT with Pro-Flo 2 fuel injection, 697 HP / 643 Tq (water pump not included) .................................................................................#46550*

As-Cast finish

Edelbrock E-force Supercharger kits are also sold separately,

visit: www.edelbrock.com/superchargers

Supercharger Kit #15541

HEAD INTAKE CAM & T-CHAIN INTAKE CARB GASKET SERIES HP/TQ HEADS BOLTS BOLTS LIFTERS GEAR SET MANIFOLD /EFI SET

Small Block Ford 347

RPM 347 438hp/413tq 60259 8552 8524 2281 / 97453 7820 7521 1813 7364

RPM 347 Dual-Quad 449hp/417tq 60259 8552 8524 2281 / 97453 7820 7535 1803/1804 7364

Performer 347 EFI 430hp/420tq 51259 8552 8524 2221 / 97453 7820 71233 n-a 7364

RPM 347 XT EFI 503hp/445tq 51259 8552 8524 2281 / 97453 7820 71283 35203 7364

Small Block chevy

Performer 310 - 50-state legal 310hp/375tq 60759 8550 8504 2102 7802 3701 1400 7361

Performer 310 310hp/375tq 60759 8550 8504 2102 7800 2701 or 2601 1406 7361

Performer dual-quad 315hp/372tq 60899 8550 8504 2102 7800 5425 or 7525 1803/1804 7361

Performer 320 320hp/382tq 60899 8550 8504 2102 7800 2701 or 2601 1406 7361

Performer 363 363hp/405tq 60979 8550 8504 2208 / 97383 7800 2716 or 75264 3528 7367

Performer 380 XT EFI 380hp/401tq 60979 8550 8516 2208 / 97383 7800 3528 1411 7367

RPM 410 410hp/408tq 60899 8550 8504 7102 7800 7101 / 7501 18013 7361

RPM E-Tec 435 435hp/435tq 60979 8550 8516 2204 / 97384 7801 7516 1813 7367

RPM E-Tec Pro-Flo2 EFI 440hp/425tq 60979 8550 8516 2205 / 97384 7801 n-a 35070 7367

RPM E-Tec XT EFI 440hp/425tq 60979 8550 8516 2205 / 97384 7801 7138 3528 7367

Hi-Torq 383 XT EFI 408hp/450tq 60979 8550 8516 2209 / 97384 7801 7138 3528 7367

SS383 460hp/460tq 60989 8550 8504 2207 / 97384 7801 7516 1413 7367

E-Force Supercharged 507hp/487tq 60989 8550 8504 2204 / 97384 7801 1552 E-Force S/C 1413 7367

Big Block chevy

555 XT Carb 676hp/649tq 51559 8554 8564 2264 / 97443 7816 2902 1813 7376

555 XT EFI 697hp/643tq 51559 8554 8564 2264 / 97443 7816 29025 35220 7376

14

edelbroCk CrAte enginesComPonents

wAnt to build your own CrAte engine?EDELBRoCk MAkES IT’S EASy, THANkS To THE DyNo-TESTED PRoVEN PERFoRMANCE oF THE ToTAL PoWER PACkAGE ®

The Total Power Package solves the parts matching puzzle by providing a tested and prove recipe of components that are engineered to work together for maximum horsepower and torque in street applications.

Below are the Total Power Package components used on Edelbrock Performance Crate Engines.

Power Package Top End for S/B Ford

15

built with Pride For Proven PerFormAnCeWhether it’s a small-block Ford or Chevy, or the monstrous 555ci big-block Chevy, each and every Edelbrock Crate Engine begins life as a brand new short block. GM is the source for our S/B Chevy’s, Ford Racing supplies the 347-ci S/B Ford foundation and Pat Musi assembles the 555 short with top-quality Dart and Scat components. Each engine is then custom assembled with the components and options you select using this brochure, our catalog, or our web site as a guide. Follow along as we build this 435 hp Performer RPM E-Tec 9.5:1 engine, detailing the hands-on quality and care that goes into every new Edelbrock Crate Engine.

Load spreader tabs distribute the clamping force evenly to reduce the chance of oil leaks

5

Hydraulic roller lifters are used in Performer RPM E-tec engines with original equipment lifter guides

6

E-tec 170 cylinder heads are installed with Edelbrock gaskets on this 435 horsepower engine

7

Guide plate alignment is carefully adjusted to center the rockers over the valve stems

8

After adjusting the lifter pre-load to 3/4-turn, an Edelbrock RPM Air-Gap manifold is installed

9

the MSD billet distributor features a custom advance curve specifically tailored to the engine

10

the finished engine is shipped in this reusable crate

13

our top-of-the-line thunder Series AVS carb with adjustable secondaries can be

easily tuned to your car

11

Applying the custom badge to our aluminum valve covers finishes up assembly

12

Hydraulic roller camshaft reduces friction allowing higher valve velocity for increased performance

2

Pan rail surfaces are cleaned with lacquer thinner to improve oil pan gasket sealing

3

High quality parts like this one piece pan gasket ensure a leak-free engine

4

to build a Performer RPM crate engine we start with a brand new ZZ4 short block

1

edelbroCk CrAte enginesCrAte engine Assembly

Go to edelbrock.com for more info or call 1-800-FuN-TEAM

Tech line: 1-800-416-8628 from 7am-5pm PST, M-FHeadquarters: 1-310-781-2222 from 8am-5pm PST, M-F

© 2010 Edelbrock Corporation • Rev. 02/10 • Bro. #03509

Air CleAnersCAmshAFtsCArburetorsCAt-bACk systemsCrAte enginesCylinder heAdsexhAust systemsFuel injeCtiongeAr drivesintAke mAniFoldsmuFFlersnitrousshoCk AbsorberssusPensiontiming ChAinsvAlve CoversvAlvetrAin PArtswAter PumPs

edelbrock corporationTorrance, ca 90503www.edelbrock.com

crate_cat

Documents

dedicated

powdered metal

milodon oil

hand timing

handheld calibration

piece efi

black coated

additional