Crankshaft Catalog

Welcome to one of the most comprehensive new aftermarket replacement crankshaft catalogs available. Additionally, we also offer an expansive line of; Good Used, Polished, Reground &

Remanufactured crankshafts for a variety of applications.

If the crankshaft you are looking for is not listed here, please feel free to call us toll free at 800.828.6943 or email us at [email protected].

LARGEST SELECTION OF NEW AFTERMARKET REPLACEMENT CRANKSHAFTS

First EditionFirst Edition

v1.3.80114

800-828-6943 | WWW.DIESELCRANKS.COM 2

Dont see what youre looking for? Call 800.828.6943 for access to thousands of used, reground & reman crankshafts!

Welcome to R.F. Engine! We are happy to have the opportunity to introduce you to our comprehensive line of new replacement crankshafts for Agricultural, Marine, Industrial, Construction and Truck applications. Crankshafts are just a part of what we do, our specialty is engines and engine parts for a variety of truck and off-road applications. We strive to provide you with quality parts, exceptional service, competitive pricing and a comprehensive line of components to get your engine up and running with one easy phone call. [ENGINES] We are an authorized reseller of New OE John Deere and Perkins engines. We also offer a number of new surplus and old-stock OE engines for many other makes and models. Additionally, we can provide remanufactured, re-built, reconditioned, and used complete engines, long blocks, and short blocks for a myriad of applications. [OVERHAUL KITS] If youre looking to rebuild rather than replace, then weve got you covered there too. We are an authorized reseller of the industrys leading af-termarket brands, such as: Advantage, Federal-Mogul, Interstate-McBee, IPD, KMP, Maxiforce, Diesel Guard, Clevite, Mahle Original, Victor Reinz, PowerMax, and Reliance just to name a few. Top of the line components at the absolute best prices are just a phone call away. One of our experienced and knowledgeable engine specialists are standing by, ready to help you with all your engine and engine parts needs. [ENGINE COMPONENTS] We also offer a full line of remanufactured, rebuilt, re-conditioned, and used components, including: Cylinder Heads, Blocks, Turbo-chargers, Camshafts, Injection Pumps and just about anything else you might need that bolts to whatever engine youre working on. An R.F. Engine specialist is on-hand and ready to help you with all your engine and engine parts needs including CRANKSHAFTS! Best Regards, R.F. Engine Team

All original content, design, and images 2014 R.F. Equipment, Inc. All rights reserved. Manufacturers names, numbers, symbols, and descriptions are property of those manufacturers, for reference purposes only and is in no way implying that any item listed is the product of said manufacturers. All Items are aftermarket replacement and not original equipment. 3

Call 800.828.6943 for new, used & reman: INJECTORS, OIL PUMPS, CAMS, HEADS, ENGINE KITS & MUCH MORE!

ALLIS-CHALMERS 4

CASE 5

CATERPILLAR 6-7

CONTINENTAL 8

CUMMINS 8-9

DAVID BROWN 10

DETROIT DIESEL 10

DEUTZ 11-12

FORD | NEW HOLLAND 13

INTERNATIONAL | NAVISTAR 14-15

JOHN DEERE 16-19

KOMATSU 20

MACK 21

PERKINS 21-23

TERMS, CONDITIONS & POLICIES 25

R.F. Engine, originally established as Rebuilt Farm Equipment, was founded in 1974 by President Emeritus, David Narhi. In the beginning, David would rebuild various types of farm equipment in a shop located behind his house where he worked, with his sons, Andrew and Tim, amidst the demands of running his own farm and working full-time as a machinist.

In 1985, he purchased a former John Deere dealership in Morrice Michigan where R.F. Engine resides to this day. At that point, he left the farming and machinist work behind, making Rebuilt Farm Equipment his full-time endeavor.

In 1995, Rebuilt Farm Equipment incorporated with Shiawassee Tractor, a used parts company owed by his youngest son, Andrew, becoming R.F. Equipment, Inc. From thence on, the company slowly began to narrow its focus to the sale of engines and engine parts exclusively.

In 2007, David Narhi passed away, leaving the company to his son, Andrew. Now, 40 years after its founding, R.F. Engine is comprised of 35 team members, 20,000 sq. ft. of warehousing space and a legacy of providing top quality engines and engine parts for Agricultural, Industrial, Construction, and Truck applications nationwide.

As a division of R.F. Equipment, Inc., R.F. Engine is dedicated to holding true to its founding principles of consistently provid-ing excellence in customer service and all other aspects of the company and its endeavors.



ALLIS CHALMERS

Part Number

Engine Model

Replaces No. Dimensions & Notes Details

5002N G138 G149

227550 Stroke: 3.875 Rod: 1.9365-1.9375" Main: 2.7480-2.7490

Weight: 37 lbs.

5006N G226 W226 226 CID

226535

Stroke: 4.500 Rod: 2.3740-2.3750" Main: Front: 2.4352.4365" Center: 2.477-2.478" Rear: 2.4770-2.4780" Notes: Stepped main journals. Used primarily in Allis Chalmers WD45.

Flange: 4 Bolt Holes, Oil Galley Plug Installed Snout: 1 Keyway Weight: 50 lbs.

5009N

433 433I 433T 200 CID 3.3L

74006184, 74006908, 74007915, 74008043, 74008078, 74020230, 7402228

Stroke: 4.250 Rod: 2.3720-2.3735 Main: 2.7465-2.7480" Notes: Includes center balancer gear.

Flange: Flat, 6 Bolt Holes Snout: Tapered, 1 Large Bolt Hole, 2 Keyways Weight: 74 lbs.

7433N AD3.152 Perkins

70280077

Stroke: 5.000" Rod: 2.2484-2.2492" Main: 2.7485-2.7493" Notes: Used in Allis Chalmers 160.

Flange: Rope-Type Seal Snout: Splined

5002N5002N

5006N5006N

5009N5009N



Part Number

Engine Model


5306N G126 Early G148

G11164, G11700, G11701, G10071

Stroke: 4.13 Rod: 1.9365-1.9375 Main: 2.6230-2.6240" Notes: G148 engines, 1960 & earlier.

Weight: 43 lbs.

5307N G148B G159

G11708, G11709, 967731, A37210

Stroke: 4.13" Rod: 1.9365-1.9375" Main: 2.6230-2.6240"

Weight: 50 lbs.

5310N G188D A151015, G11740, G11741, A39151, 976321

Stroke: 4.125" Rod: 2.0605-2.0615" Main: 2.8730-2.8740"

Flange: Flat, 4 Bolt Holes, Open Pilot Hole (Uses Bushing) Snout: Threaded, 2 Keyways Weight: 76 lbs.

5314N G188D A151015, G11740, G11741, A39151, 976321

Stroke: 4.125" Rod: 2.0605-2.0615" Main: 2.8730-2.8740"

Flange: Flat, 4 Bolt Holes, Splined Pilot Hole (13-Splines) Snout: Threaded, 2 Keyways Weight: 76 lbs.

5315N 207D A144011, 976321

Stroke: 4.125" Rod: 2.2480-2.2492" Main: 2.8730-2.8740" Notes: Non-turbo applications only.

Flange: Flat, 4 Bolt Holes, Open Pilot Hole (Uses Bushing) Snout: Threaded, 2 Keyways Weight: 77 lbs.

5734N 4-390 4B 4BT

3903827, 3907803, 3929036, J908031, J918323

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682 Notes: Cummins / Consolidated Die-sel engine.

Flange: Flat, 8 Bolt Holes Snout: 4 Bolt Holes, 1 Keyway Weight: 93 lbs.

5309N

251 267 284 301 336 Small Main

A166001, 010700, A22578, 966772, A155438

Stroke: 5.00" Rod: 2.7480-2.7490" Main: 2.9980-2.9990 Notes: Main Journal : 2.999. Place for detachable gear by center main.

Weight: 95 lbs.

5316N 336 Large Main

A65109, A61983, 969266, A58722,

Stroke: 5.00" Rod: 2.999 Main: 3.499 Notes: Main Journal : 3.499. Place for weld-on gear by center main.

Weight: 95 lbs.

5733N 6-590 6B 6BT

3907804, 3929037, 3907604, 3908032

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682" Notes: Cummins / Consolidated Die-sel engine. Not for applications with bolt-on sensor.


CASE.

5306N5306N 5309N5309N 5314N5314N 5307N5307N



Part Number

Engine Model


7429N 3054

7C8214, 4P9948 071Z724149, ZZ90082, 1397018, Z13071, 2218057, 7C3184, 3131-5666

Stroke: 5.00 Rod: 2.4990-2.4995 Main: 2.9985-2.9990 Notes: To ensure you receive the right crankshaft, please provide # of bolt and dowel holes in rear flange when ordering.

Flange: Lip-Type Seal Snout: Splined, 3 Bolt Holes, 1 Keyway Weight: 75 lbs.

5443N 3056 1930159, 2340207 Stroke: 5.000 Rod: 2.4990-2.500 Main: 2.9980-2.9990

Weight: 102 lbs.

5476N 3066 1253005, 5I7671 0806127, 08C127

Stroke: 5.118 Rod: 2.3600-2.3608 Main: 3.5410-3.5420

Flange: Flat, 6 Bolt Holes, 2 Dowel Holes Snout: Straight, Threaded, 2 Keyways Weight: 140 lbs.

5441N 3116 3126 C7

1051725, 4W3498, 1013228, 4P5121, 7W5206, 2275480, 2715658

Stroke: 5.000" Rod: 2.7551-2.7567" Main: 3.5425-3.5441" Notes: Front gear is straight tooth, 50-teeth. Will not accept reluctor ring.

Flange: Centering Ring, 8 Bolt Holes, 1 Dowel Hole Snout: Straight, 4 Bolt Holes, 1 Keyway Weight: 160 lbs.

5453N 3176B C12

1694189 Stroke: 5.9055 Rod: 3.5031-3.5047 Main: 4.2512-4.2528

Weight: 187 lbs.

5430N 3204

1W9771, 4N0012, 4N111X, 6N8290, 1W0400, 4N0111, 4N1111, 7N5137, 0R1206, 0R1209, 0R5024, 0R5164, 0R5474, 0R5560

Stroke: 5.000" Rod: 2.7489-2.7505" Main: 3.4984-3.5000" Notes: 40-Tooth front gear (0.906 Wide).

Flange: Centering Ring, 8 Bolt Holes Snout: 2 Keyways (1 Long, 1 Short), 1 Large Bolt Hole Weight: 119 lbs.

5493N 3208

2W0085, 9N6221, 9N0300, 9N0303, 4N8454, 4N8453, 9N6220, 2N8453, 4N9054, 4N9055, 9N6304, 9N0305, 9N300, 9N6202, 9N6220, 0R5051, 0R5053, 0R5163,

Stroke: 5.000" Rod: 2.7496-2.7504" Main: 3.4990-3.5000" Notes: Replaces the 8-bolt flywheel, provided the 2 unused oil holes are plugged. Snout neck : 2.125

Flange: Centering Ring, 10 Bolt Holes (Non-Symmetrical), 1 Dowel Hole Snout: Straight, 1 Threaded Bolt Hole, 1 Large Keyway Weight: 128 lbs.

5442N D330

8M4505, 8M4504, 8M4506, 2M5170, 4M9950, 2S5570, 5S5251, 9H2725, 4M9960

Stroke: 5.50" Rod: 2.9987-3.0003" Main: 3.4990-3.5000" Thrust Width: 1.593" Notes: Front gear has 40-teeth and is L/H helical.

Flange: Flat, 9 Bolt Holes Snout: Tapered, 1 Bolt Hole, 1 Keyway Weight: 146 lbs.

5471N 3304

2P1491, 5C3834V, 2P1686, 5S3835, 2P6213, 5S5251, 2P6214, 5S5252, 2P6217, 9S771, 2Y4504, OR1212, 2W7960, 0R1214, 3Y1613, 0R5021, 4N769, 0R5166, 4N7692, 0R5167, 4N7694, 0R5169, 4N7695, 0R5170

Stroke: 6.000" Rod: 2.9987-3.0003 Main: 3.4990-3.5000 Notes: Front timing gear has 40-teeth and is L/H helical.


CATERPILLAR



Part Number

Engine Model


5472N 3306

1P1390, 5C3836, 1P1391, 5C3837, 1W8356, 5S5870, 2P2824, 5S5871, 2P2842, 5Y1546, 2P6219, 6N8079, 2P6221, 8M4502, 2W7458, 9S2270, 2Y5206, 9S3057, 2Y4507, SP6222, 4N7693, 0R5018, 4N7696, Y4517, 4P9857

Stroke: 6.000" Rod: 2.9987-3.0003 Main: 3.4990-3.5000 Notes: Front timing gear has 40-teeth and is L/H helical.

Flange: Flat, 9 Bolt Holes, 1 Dowel Hole Snout: Tapered, 1 Bolt Hole, 1 Keyway Weight: 200 lbs.

5425N 3406A 3406B

7C4859, 1W6207, 2W2585, 6N3906, 2W2300, 1W6206 1170456, 6N3906, 6N3907, 7C3536, 9Y9112, 0R5026, 0R5129, 0R5132

Stroke: 6.50" Rod: 3.8192-3.8208" Main: 4.7492-4.7508" Notes: Early style. Need to confirm CN and number of bolt holes in snout.

Flange: Centering Ring, 12 Bolt Holes Snout: 12 Bolt Holes, 1 Dowel Hole Weight: 400 lbs.

5498N 3406C 3406E C15

6I1453, 4P9121, 7C3536, 9Y9112

Stroke: 6.500 Rod: 3.5425-3.5441 Main: 4.7492-4.7508 Notes: Has a groove on edge of #2 counterweight for timing sensor.


5437N 3408 1W5008, 7N3408, 1W6208, 0R5066, 1W6209, 0R5067, 4N0008, 0R5179, 4N9442, 0R5556, 7N3407

Stroke: 6.000" Rod: 3.8192-3.8208" Main: 4.7492-4.7508" Notes: Early style, 10 counterweights.

Flange: Centering Ring, 12 Bolt Holes Snout: 12 Bolt Holes Weight: 400 lbs.

5439N 3408B 1W5009, 1W5008 Stroke: 6.000" Rod: 3.81889-3.8197" Main: 4.7479-4.7489" Notes: Late style, 9 counterweights.

Flange: Centering Ring, 12 Bolt Holes, 1 Dowel Hole Snout: Centering Ring, 12 Bolt Holes Weight: 400 lbs.

5494N 3412 1649

0R5069, 1W6213, 0R5070, 2W4088, 0R5339, 4N0012, 261-9648, 1W6212, 0R5070, 1W6213, 0R5339, 4N0012, 261-9647, 0R5069

Stroke: 6.500" Rod: 3.8192-3.8208" Main: 4.7492-4.7508" Notes: Front gear not included,

Flange: Centering Ring, 12 Bolt Holes, 1 Dowel Hole Snout: Centering Ring, 12 Bolt Holes Weight: 550 lbs.

5460N C7 2827956

Stroke: 5.000 Rod: 2.7551-2.7567 Main: 3.5425-3.5441 Notes: Front gear is straight tooth, 40-teeth. Will not accept reluctor ring.

Weight: 155 lbs.

5468N C9 2827958 Stroke: 5.870 Rod: 3.1488-3.1504 Main: 4.0937-4.0953

Weight: 220 lbs.

5451N C10 11937517, 1161081 Stroke: 5.5118 Rod: 3.2275-3.2291 Main: 4.2512-4.2528

Weight: 250 lbs.

5452N C11 207-8503 Stroke: 5.51 Rod: 3.5031-3.5047 Main: 4.2512-4.2528:

Weight: 292 lbs.

5453N C12 3176B

1694189 Stroke: 5.9055 Rod: 3.5031-3.5047 Main: 4.2512-4.2528

Weight: 187 lbs.


Weight: 276 lbs.

5498N C15 6I1453, 4P9121, 7C3536, 9Y9112

Stroke: 6.500 Rod: 3.5425-3.5441 Main: 4.7492-4.7508 Notes: Has a groove on edge of #2 counterweight for timing sensor.



Weight: 280 lbs.

CATERPILLAR.



Part Number

Engine Model


6002N Z120 1750280M1, Z120C500

Stroke: 3.75" Rod: 1.9365-1.9375" Main: 2.2490-2.2500"

Weight: 35 lbs.

6003N Z129 Z134

1750169M1, Z129C500, Z134C500, 830686M91, Z129C205

Stroke: 3.875" Rod: 1.9365-1.9375" Main: 2.2490-2.2500"

Flange: Flat, 4 Bolt Holes Snout: 2 Keyways Weight: 35 lbs.

5654N G176 G176C300, 830756M91

Stroke: 4.38" Rod: 2.0615-2.0625" Main: 2.3740-2.3750"

Weight: 46 lbs.

Part Number

Engine Model


5734N

4B 4BT 4BTA 3.9L

3903827, 3907803, 3929036, J908031, J918323

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682 Notes: For CaseIH applications.


5795N ISB 3.9L

3929027, 4896764, 2831067

Stroke: 4.7244 Rod: 2.7160-2.7170 Main: 3.2672-3.2682 Notes: Front gear is 0.40 wide. Rear gear is 1.25 wide.

Flange: Lip-Type Seal, 8 Bolt Holes Snout: 6 Bolt Holes, 1 Dowel Hole, Speed Indicator Ring Weight: 100 lbs.

5790N ISBe 4.5L NEF/Iveco

3974634, 3974539, 3968176, 3968177

Stroke: 4.882 Rod: 2.7160-2.7170 Main: 3.2672-3.2682

Flange: Lip-Type Seal, 8 Bolt Holes, 2 Dowel Holes Snout: 6 Bolt Holes, 1 Dowel Pin Hole Weight: 120 lbs.

5733N

6B 6BT 6BTA 5.9L

3907804, 3929037, 3907604, 3908032

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682" Notes: Not for applications with bolt-on sensor. For CaseIH applications.


5794N ISB 5.9L 24-Valve

3946437, 3964040, 3978482, 4980462, 3944243

Stroke: 4.7244 Rod: 2.7160-2.7170 Main: 3.2672-3.2682 Notes: Can replace 5733N. Also works in CNH Iveco 667TA engines.

Flange: Lip-Type Seal, 8 Bolt Holes, 2 Pilot Hole Snout: 4 Bolt Holes, 1 Dowel Pin Hole Weight: 130 lbs.

5798N QSB 5.9L

2830476, 3942441, 3929627, 4896766

Stroke: 4.7244 Rod: 2.7160-2.7170 Main: 3.2672-3.2682 Notes: Off-road applications only. Rear driven injection pump. Front gear has 36-teeth and is 0.40 wide. Rear gear is 1.25 wide.

Flange: Lip Seal, 8 Bolt Holes Snout: 6 Bolt Holes, 1 Dowel Hole, Speed Indicator Ring Weight: 140 lbs.

5791N ISB 6.7L

3974538, 4934862, 3974635, 4934861

Stroke: 4.88188 Rod: 2.7150-2.7170 Main: 3.2662-3.2682

Weight: 140 lbs.

CONTINENTAL

CUMMINS



Part Number

Engine Model


5735N

6C 6CT 6CTA 8.3L

3917320, 3917443 3918986, 390562, 3914584, 728533

Stroke: 5.315" Rod: 2.9906-2.9926" Main: 3.8568-3.8588" Notes: Front timing gear has 42-teeth and is L/H helical.

Flange: Flat, 8 Bolt Holes, 1 Dowel Hole Snout: Straight, 4 Bolt Holes, 1 Keyway Weight: 174 lbs.

5721N L10 5-Bolt Snout

3819989, 3803898, 3073707, 3027931

Stroke: 5.354" Rod: 3.1097-3.1107" Main: 4.4888-4.4904" Notes: Internally balanced. Snout is aprx. 2.0625 long with 3.385 .

Flange: Flat, 8 Bolt Holes, 2 Offset Dowel Holes Snout: 5 Bolt Holes, 1 Keyway Weight: 250 lbs.

5736N L10A 5-Bolt Snout

3819624

Stroke: 5.354" Rod: 3.1097-3.1107" Main: 4.4888-4.4904 Notes: Externally balanced. Snout is approximately 3.25 long.

Flange: 8 Bolt Holes, 2 Offset Dowel Holes Snout: 5 Bolt Holes, 1 Keyway Weight: 250 lbs.

5739N L10 6-Bolt Snout

3803898, 3027931, 3819989

Stroke: 5.354" Rod: 3.1097-3.1107" Main: 4.4888-4.4904" Notes: Snout is approximately 2.72 long and 3.361 in diameter.

Flange: Flat, 8 Bolt Holes, 2 Dowel Holes Snout: 6 Bolt Holes, 1 Keyway Weight: 250 lbs.

5792N ISL 8.9L

3965010, 3965011, 3965012

Stroke: 5.6890 Rod: 2.9906-2.9926 Main: 3.8568-3.8588

Weight: 160 lbs.

5741N M11 3073707

Stroke: 5.790" Rod: 3.1083-3.1107" Main: 4.4888-4.4903 Notes: Timing gear has 40-teeth and is R/H helical.

Flange: Flat, 8 Bolt Holes Snout: 5 Bolt Holes Weight: 250 lbs.

5710N 855 Bull Nose Big Cam

3024923, 101109, 3608833, 10846, 3004165, 111786, 3000140, 110760, 124310, 12821, 5671, 130186, 0131, 144016, AR1937

Stroke: 6.000" Rod: 3.1240-3.1250" Main: 4.4990-4.5000" Notes: For Big Cam engines.

Flange: Flat, 6 Bolt Holes Snout: Straight, 6 Bolt Holes, 1 Keyway Weight: 370 lbs.

5715N 855 Taper Nose Small Cam

101109, 162186, 110760, 181030, 111789, 187640, 121610, 196410, 123410, 208460, 130186, 208470, 135030, 3001588, 136530, 3029340, 142770, 42960, 142960

Stroke: 6.000" Rod: 3.1240-3.1250" Main: 4.4990-4.5000" Notes: For Small Cam engines.


5738N N14 3064291 Stroke: 6.00" Rod: 3.497-3.4995" Main: 4.4990-4.5000"


5766N ISX 4925762, 3681910, 4925761, 4319022

Stroke: 5.9055 Rod: 3.7002-3.7014 Main: 4.9205-4.9220

Flange: 12 Bolt Holes, 2 Dowel Holes Snout: 12 Bolt Holes, 1 Dowel Holes, 57-Tooth Ring Gear, 37-Tooth Gear

5704N KT1150 KT1950 K19

3096362, 3016098, 3016096, 3003000, 3201082, 3005357

Stroke: 6.250" Rod: 3.9985-4.0000" Main: 5.4985-5.5000" Notes: Has integral counterweights.

Flange: Flat, 9 Bolt Holes Snout: 6 Bolt Holes, 1 Keyway, 1 Dowel Hole Weight: 525 lbs.

5740N K38, KT38, KTA38, KT2300, KV12

3630076, 3630058, 3630075, 3630072, 3176428, 3176424

Stroke: 6.2589 Rod: 4.2470-4.2500 Main: 6.4975-6.5000 Notes: 3.05 snout bolt circle diame-ter. Will upgrade 3176428 & 3176424 to updated style nose with Cummins Spacer, 3069781, Adapter, 3069776 (not included), and Pulley (PN varies).

Weight: 795 lbs.

5799N G38, G50, K50, GTA50, QSK50

3629276, 3627642, 3626832, 4098998

Stroke: 6.2589 Rod: 4.2470-4.2500" Main: 6.4975-6.5000

Weight: 1100 lbs.

CUMMINS.



Part Number

Engine Replaces No. Dimensions Details

5399N AD3/55 K961726 Stroke: 4.500 Rod: 2.3730-2.3735 Main: 2.4990-2.4995

Weight: 85 lbs.

5318N AD4/47 905196, D1061, D908453, 5176

Stroke: 4.5 Rod: 2.2480-2.2485 Main: 2.4990-2.4995"

Weight: 115 lbs.

5321N AD4/49 D917985 Stroke: 4.00 Rod: 2.373 Main: 2.499

Flange: Flat, Rope-Type Seal, 4 Un-threaded Bolt Holes, 1 Dowel Hole Snout: Splined, Keyed & Threaded Weight: 70 lbs.

5312N AD4/55 Small Main

D905196, D179935, 917935, 2338423

Stroke: 4.500" Rod: 2.3730-2.3735" Main: 2.4990-2.4995" Notes: This engine is considered the Small Main version.


5317N AD4/55 Large Main

D928415

Stroke: 4.50" Rod: 2.3730-2.3735" Main: 2.6240-2.6245 Notes: This engine is considered the Large Main version.


Part Number


6278N 6V71 5146733, 5117906, 5144862, 5146572

Stroke: 5.000" Rod: 2.9985-3.0002" Main: 4.4985-4.5002"

Flange: Flat, No Centering Ring, 6 Bolt Holes Snout: Straight, 1 Large Bolt Hole, 3 Keyways Weight: 160 lbs.

6204N 6V92 8926419, 8926921, 5144862, 5145300

Stroke: 5.00" Rod: 2.9990-3.000" Main: 4.4990-4.5000" Notes: Right hand rotation.

Flange: Flat, No Centering Ring, 6 Bolt Holes Snout: Straight, 1 Large Bolt Hole, 3 Keyways Weight: 160 lbs.

6279N 8V71 5103264, 5119906, 5117908, 5144867

Stroke: 5.00" Rod: 2.9985-3.0002" Main: 4.4985-4.5002"

Flange: Flat, No Centering Ring, 8 Bolt Holes Snout: Straight, 1 Bolt Hole, 3 Keyways Weight: 200 lbs.

6206N 60 Series 11.1L

8929238, 8929413 Stroke: 5.472" Rod: 3.3450-3.3460" Main: 4.920-4.9210"

Flange: Flat, No Centering Ring, 12 Bolt Holes Snout: Straight, 1 Keyway Weight: 350 lbs.

6205N 60 Series 12.7L

8929239 Stroke: 6.299" Rod: 3.3450-3.3460" Main: 4.9200-4.9210"

Flange: Centering Ring, 12 Bolt Holes, 1 Keyway Snout: 12 Bolt Holes, 1 Keyway Weight: 350 lbs.

6207N 60 Series 14.0L

23527225 Stroke: 6.499 Rod: 3.7390-3.7400 Main: 4.9200-4.9210

Weight: 350 lbs.

DAVID BROWN

DETROIT DIESEL



Part Number


7512N F1L511 02233635 Notes: Bolt-on counterweights.

7533N F2L511 04152745, 20050551102

Notes: Bolt-on counterweights.

7534N F2L511 04152745, 20050551102

Notes: Integrated counterweights.

7521N F2L912

02232854, 02929337, 04152591, 3371552, 20050591203

Stroke: 4.724" Rod: 2.3599-2.3606" Main: 2.4398-2.4405" Notes: Without counterweights.

7523N F3L912

02929338, 04152646, 210556, 2136928, 20050591203

Stroke: 4.724" Rod: 2.3599-2.3606" Main: 2.4398-2.4405" Notes: Bolt-on counterweights.

7513N F3L912 New Generation

M2931044 Stroke: 4.724" Rod: 2.3599-2.3606" Main: 2.4398-2.4405"

7524N F4L912

02138819, 0292340, 04152903, 20050591204


7526N F4L912 02929339, 20050591214


7514N F4L912 New Generation

M2931048 Stroke: 4.724" Rod: 2.3599-2.3606" Main: 2.4398-2.4405"

7525N F5L912 M292378 Stroke: 4.724" Rod: 2.3599-2.3606" Main: 2.4398-2.4405"

7527N F6L912 02929342, 04151011, 2136993, 2136932, 20050591206


7515N BF4L913 M4150526 Stroke: 4.9213" Rod: 2.5973-2.5980" Main: 2.9516-2.9524"

7516N F4L913 BF4L913 New Generation

M2931050 Stroke: 4.9213" Rod: 2.5973-2.5980" Main: 2.9516-2.9524"

DEUTZ.



DEUTZ

Part Number




7532N BF6L913 BF6L913C

M2139405 Stroke: 4.9213" Rod: 2.5973-2.5980" Main: 2.9516-2.9524"

7519N F4L914 BF4L914

M2931492

7520N BF6L914 F6L914

D2931400

7528N F6L413F M2422049 Stroke: 5.118" Rod: 2.9517-2.9528" Main: 3.7382-3.7397"

7522N BF8L513 BF8L413F

M2144317 Stroke: 5.118" Rod: 2.9517-2.9528" Main: 3.7382-3.7397"

7542N F3L1011 BF3L1011

M4270229

Stroke: 4.1338" Rod: 2.1642-2.1650" Main: 2.7547-2.7555" Notes: 105mm hub.

7529N F2L2011 M2931735 Stroke: 4.409" Rod: 2.1642-2.1650" Main: 2.7547-2.7555" Notes: Includes bearings.

7530N F2L2011 F2L1011F

M4270231 Stroke: 4.409" Rod: 2.1642-2.1650" Main: 2.7547-2.7555"

7531N BF4M1012 D2929934 Stroke: 4.134" Rod: 2.1650-2.1660" Main: 2.7555-2.7566"

7535N BF4M1013 M2929962 Stroke: 5.118" Rod: 2.6764-2.6772" Main: 3.3457-3.3464"





FORD.

Part Number


1583N 134 172G 192G

B9NN6303

Stroke: 3.60" Rod: 2.2978-2.2986" Main: 2.4969-2.4977" Notes: Has place for center gear but does not include the gear itself.

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole Snout: Splined, 1 Keyway Weight: 64 lbs.

1584N 172D 192D

EZJL6300BA, B9NN6302B

Stroke: 3.60" Rod: 2.2978-2.2988" Main: 2.4978-2.4988" Notes: Includes balancer drive gear.

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole Snout: Splined, 1 Keyway Weight: 64 lbs.

1590N

D175 D183 D192 BSD329

E0NN6303AA, C5NE6303L, C5NE6303R, C5NE6305

Stroke: 4.200" Rod: 2.7496-2.7500" Main: 3.3713-3.3723"

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: Keyed, 1 Bolt Holt Weight: 83 lbs.

1591N D201 BSD333

F0NN6303MA, C5NE6303N, C5TE6303, E5NN6306N

Stroke: 4.400" Rod: 2.7496-2.7504" Main: 3.3713-3.3723"

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: Keyed, 1 Bolt Hole Weight: 101 lbs.

1586N 220 Early

E1ADDN6303F, E1ADDNND, E1ADDNN6303E, E1ADDNN6303D

Stroke: 4.524-4.528 Rod: 2.4997-2.5005 Main: 3.0002-3.0010 Notes: Snout is straight (no step) and 3.015 long.

Flange: Flat, Rope-Type Seal, 6 Bolt Holes, 1 Dowel Hole Snout: Straight, 1 Large Bolt Hole, 1 Long Keyway Weight: 78 lbs.

1585N 220 Gas & Diesel

Late E1ADDN6306B

Stroke: 4.524-4.528 Rod: 2.4997-2.5005 Main: 3.0002-3.0010 Notes: Snout is stepped and 2.772 long.

Flange: Flat, Rope-Type Seal, 6 Bolt Holes, 2 Dowel Holes Snout: Stepped, 1 Large Bolt Hole, 1 Long Keyway Weight: 78 lbs.

1595N76 76-Tooth

1595N78 78-Tooth

233 256 BSD442

C5NE6303K

Stroke: 4.203" Rod: 2.7496-2.7504" Main: 3.3713-3.3723" Notes: Includes balancer drive gear with W style teeth. Check balancer drive gear to determine Early (78-Tooth) or Late (76-Tooth).

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Weight: 105 lbs.

1598N76 76-Tooth

1598N78 78-Tooth

D268 BSD444

E5NN6303DA, E5NN6303FA, D9NN6303AA, E5NN6303CA, D9NN6303A

Stroke: 4.4000" Rod: 2.7496-2.7504" Main: 3.3713-3.3723" Notes: Includes balancer drive gear with W style teeth. Check balancer drive gear to determine Early (78-Tooth) or Late (76-Tooth).

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Weight: 103 lbs.

1587N 401 BSD666

E3HN6303AA, E3HN6303AB, E6HN6303CB, E6HN6303CC, C7NN6303, C7NN6303A

Stroke: 4.4000" Rod: 2.7496-2.7504" Main: 3.3713-3.3723"

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Keyway Weight: 80 lbs.

1606N T853A 1.7L Shibaura

SBA115256471

Stroke: 3.940 Rod: 2.3602-2.3610 Main: 2.6750-2.6760 Note: Used in Ford 1910.

Weight: 44 lbs.



Part Number


6750N C60 353743R93, 251264R1, 357247R1

Stroke: 2.75" Rod: 1.4980-1.4990" Main: 1.6230-1.6240"

Weight: 25 lbs.

6760N BD144 BD154 G164

3110995R91, 13776E, 751303R2, 751303R3

Stroke: 4.000" Rod: 2.3740-2.3750" Main: 2.4990-2.5000"

Flange: 4 Bolt Holes, 2 Dowel Holes Snout: Threaded End, 2 Key-ways Weight: 38 lbs.

6713N D206 3132889R2, 3132968R93

Stroke: 4.38" Rod: 2.5185-2.5193" Main: 3.1485-3.1492" Notes: Includes 80-tooth helical center gear.

Weight: 83 lbs.

6719N D239 DT239

313276243R92, 3144624R92, 3132982R94, 3144626R92, 182752R2, 2744406R1, 3132752R3

Stroke: 5.0625" Rod: 2.5185-2.5193" Main: 3.1484-3.1492" Notes: Includes 80-tooth helical center gear.

Flange: 7 Bolt Holes, 1 Dowel Hole Snout: Straight, 3 Bolt Holes, 1 Keyway Weight: 81 lbs.

5734N 239 CID 3.9L Cummins

3903827, 3907803, 3929036, J908031, J918323

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682 Notes: Cummins / Consolidated Diesel engine.

Flange: 8 Bolt Holes Snout: 4 Bolt Holes, 1 Keyway Weight: 93 lbs.

6793N D268 DT268

3228376R91, A097292, 528R279, 218528R1, 218528R2, 218528R3, 3218528R1

Stroke: 5.5000" Rod: 2.5185-2.5193" Main: 3.1484-3.1492" Notes: Includes 90-tooth straight center gear.

Flange: 7 Bolt Holes Snout: Straight, 3 Bolt Holes, 1 Keyway Weight: 91 lbs.

6791N D358 DT358

3059514R1, 3136036R95

Stroke: 5.059" Rod: 2.5185-2.5193" Main: 3.1484-3.1492"

Flange: 7 Bolt Holes, 1 Dowel Hole Snout: 3 Bolt Holes Weight: 150 lbs.

5733N 359 CID 5.9L Cummins

3907804, 3929037, 3907604, 3908032

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682" Notes: Cummins / Consolidated Diesel engine. Not for applications with bolt-on sensor.

Flange: 8 Bolt Holes Snout: 4 Bolt Holes, 1 Key-way Weight: 128 lbs.

INTERNATIONAL NAVISTAR

6719N 6719N INTERNATIONAL D239 & DT239INTERNATIONAL D239 & DT239



Part Number


6799N D360 DT360

1809953C91, 1809954C1, 675351C2

Stroke: 4.751" Rod: 2.5182-2.5197" Main: 3.3742-3.3755" Notes: For truck applications only.

Flange: 8 Bolt Holes Snout: 1 Keyway, 3 Bolt Holes Weight: 120 lbs.

6774N D361 DT361

3223882R2 Stroke: 4.50" Rod: 2.9977-2.9990" Main: 3.3742-3.3755"

Weight: 95 lbs.

6730N D414 DT414

675050C1, 675668C92

Stroke: 4.750" Rod: 2.9977-2.9990" Main: 3.3742-3.3755"


6731N D436 DT436

675051C1, 675663C92

Stroke: 5.004" Rod: 2.9977-2.9990" Main: 3.3742-3.3755"


6732N D466 DT466

675669C93, 675591C2, 1816975C1, 675591C1, 675591C, 675591C3, 675591C4

Stroke: 5.350" Rod: 2.9977-2.9990" Main: 3.3742-3.3755" Notes: Early (pre-2000) style with 8-bolt rear flange.

Flange: Flat, 8 Bolt Holes Snout: Straight, 3 Bolt Holes, 1 Keyway Weight: 200 lbs.

6736N DT466E 7.6L

1830596C91

Stroke: 5.350 Rod: 3.1494-3.1506 Main: 3.5344-3.5356 Notes: Late (after 2000) style with 12-bolt rear flange. Verify stroke when ordering.

Flange: Centering Ring, 12 Bolt Holes, 1 Dowel Hole Snout: Straight, 3 Bolt Holes, 1 Dowel Hole, 1 Keyway Weight: 185 lbs.

6713N6713N 6793N6793N 6719N6719N

INTERNATIONAL NAVISTAR.

6732N6732N 6760N6760N



Part Number


6833N 3.152 3.164 3.179

AT18031, T23516, T20031, RE46896

Stroke: 4.330" Rod: 2.7480-2.7490" Main: 3.1230-3.1240"

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 2 Key-ways Weight: 75 lbs.

6826N 4.202 4.219 4.239 Early

AT18030, R23517, R81959, R94644, RE48748

Stroke: 4.330" Rod: 2.7480-2.7490" Main: 3.1235-3.1245" Notes: 36mm (1.42) snout. 4.239 ESN up to 769619.

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: Straight, 1 Bolt Hole, 1 Keyway Weight: 98 lbs.

6851N 4.239 Late 4039D

R23909, R97926, R97928, R121018, R81959, R979266, RE20585, RE65224

Stroke: 4.330" Rod: 2.7480-2.7488" Main: 3.1236-3.1244" Notes: 60mm (2.36) snout. 4.239 ESN 769620 & up.


6809N 4.254 4.270 Early

AR26428, R40570, R26540

Stroke: 4.750" Rod: 2.9980-2.9990" Main: 3.3715-3.3725" Notes: 4.270 ESN up to 280000. Includes balancer driver gear.

Flange: Flat, 4 Bolt Holes, 2 Dowel Holes Snout: 1 Bolt Hole, 2 Key-ways Weight: 121 lbs.

6841N 4.270 Late AR40485, R40570, R46498

Stroke: 4.750" Rod: 2.9980-2.9990" Main: 3.3715-3.3725" Notes: 4.270 ESN 280001 & up. Includes balancer drive gear.

Flange: Centering Ring, 4 Bolt Holes, 2 Dowel Holes Snout: 1 Bolt Hole, 2 Key-ways Weight: 121 lbs.

6813N

4.276 4.276T 4045D 4045T

RE56792, RE71439, R54501

Stroke: 5.000" Rod: 3.0630-3.0640" Main: 3.1235-3.1245"


6852N

4.276 4.276T 4045 4045T Long Nose

RE54883, RE33485, R90825, R120009

Stroke: 5.000" Rod: 3.0630-3.0640" Main: 3.1235-3.1245" Notes: 60mm (2.36) Long Nose snout.


JOHN DEERE



Part Number


6837N

6.303 6.329 6.359 6059D/T/A

AT22562, R108568, T23266, R108679, R45541, RE502190

Stroke: 4.330" Rod: 2.7480-2.7488" Main: 3.1236-3.1244"

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Weight: 122 lbs.

6820N

6.414 6.414T 6068 6068T

RE45517, R54619, RE33687, RE502191

Stroke: 5.00" Rod: 3.0630-3.0640" Main: 3.1230-3.1240" Notes: Also available with 6-bolt rear flange, call for details.

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Key-way Weight: 144 lbs.

6822N 6.404 Early RE42674, AR26431, R26560, RE63292

Stroke: 4.750" Rod: 2.9980-2.9990" Main: 3.3715-3.3725" Notes: 6.404 ESN up to 214999. Includes oil pump drive gear.

Flange: Flat, 4 Bolt Holes, 2 Dowels Snout: 1 Bolt Hole Weight: 160 lbs.

6823N 6.404 Late 6.466 6076 Early

AR96189, R26540, R26560, R56919, R56934, RE63451, RE53422

Stroke: 4.750" Rod: 2.9980-2.9990" Main: 3.3715-3.3725" Notes: 6.404 ESN 215000 & up and 6076 ESN up to 187657.

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: 2 Keyways, 1 Bolt Hole Weight: 160 lbs.

6855N 6076 Late Long Nose

RE53201, R104855, RE42671, RE63293

Stroke: 4.75" Rod: 2.9980-2.9990" Main: 3.3720-3.3730" Notes: 6076 ESN 187658 & up. Nose is 3.4 from shoulder of the 1st main journal to the end of the snout. In-cludes oil pump drive gear.

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Snout: 1 Bolt Hole, 2 Key-ways Weight: 167 lbs.

6857N 6076 Late Short Nose

RG23551, RE53199

Stroke: 4.75" Rod: 2.9980-2.9990" Main: 3.3720-3.3730" Notes: Nose is 3 from shoulder of the 1st main to the end of the snout. In-cludes oil pump drive gear.

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Snout: 1 Bolt Hole, 2 Key-ways Weight: 167 lbs.

6821N 6.531 6.619 6.101 Early

AR92533, AR36350, AR47403, AR69264, AR78403, R36350, R57730, R63476, R63478

Stroke: 5.00" Rod: 3.4980-3.4990" Main: 3.7480-3.7490" Notes: Includes oil pump drive gear.

Flange: 6 Bolt Holes, 2 Large Dowels Snout: 1 Large Bolt Hole, Threaded Weight: 265 lbs.

JOHN DEERE.



Part Number


6897N 3029 2.9L PowerTech

RE50979 R101223, RE521348

Stroke: 4.331 Rod: 2.7480-2.7490 Main: 2.7480-2.7490

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: 1 Keyway, 1 Bolt Hole Weight: 75 lbs.


RE504638, RE50618, R113596

Stroke: 5.00 Rod: 3.0630-3.0640 Main: 3.1230-3.1240 Notes: Single step straight nose style. Reference diagram below.

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: Single Step, 4 Bolt Holes Weight: 110 lbs.


R113596

Stroke: 5.00 Rod: 3.0630-3.0640 Main: 3.1230-3.1240 Notes: Double step straight nose style. Reference diagram below.

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: Double Step, 4 Bolt Holes Weight: 110 lbs.


RE506195, R503715

Stroke: 5.00 Rod: 3.0630-3.0640 Main: 3.1230-3.1240 Notes: Tapered Nose. Reference diagram below.

Flange: 4 Bolt Holes, 1 Dowel Hole Snout: Tapered, 1 Bolt Hole, 1 Key-way Weight: 110 lbs.


R116076, RE504639, RE515785

Stroke: 5.00 Rod: 3.0630-3.0640 Main: 3.1230-3.1240

Flange: 6 Bolt Holes, 1 Dowel Hole Snout: Straight Nose, 4 Bolt Holes Weight: 145 lbs.


RE505921, R503470 Stroke: 5.00 Rod: 3.0630-3.0640 Main: 3.1230-3.1240

Flange: 6 Bolt Holes, 1 Dowel Snout: Tapered Nose, 1 Bolt Hole, 1 Keyway Weight: 145 lbs.

6869N 6081 8.1L Early PowerTech

RE534314

Stroke: 5.059 Rod: 2.998-2.999 Main: 3.748-3.749 Notes: Both gears are straight tooth gears.

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: Straight Nose, 1 Bolt Hole, 2 Keyways Weight: 165 lbs.

6899N 6081 8.1L Late PowerTech

RE535300

Stroke: 5.059 Rod: 2.998-2.999 Main: 3.748-3.749 Notes: Front gear is straight tooth, rear gear is helical tooth.

Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: Straight Nose, 1 Bolt Hole, 2 Keyways Weight: 165 lbs.

6890N 6090 9.0L

RE540429, R526075 Stroke: 5.3443 Rod: 3.2869-3.2879 Main: 3.7479-3.7490

Flange: 6 Bolt Holes, 1 Dowel Hole Weight: 225 lbs.

6891N 6090 9.0L

RE548603, R525587, RE533517

Stroke: 5.3443 Rod: 3.2869-3.2879 Main: 3.7479-3.7490

Flange: 10 Bolt Holes, 1 Dowel Hole Weight: 225 lbs.

SINGLE STEPSINGLE STEP

STRAIGHT NOSESTRAIGHT NOSE TAPERED NOSETAPERED NOSE

DOUBLE STEPDOUBLE STEP

STRAIGHT NOSESTRAIGHT NOSE

JOHN DEERE

Reference Reference 6858N & 6861N6858N & 6861N

Reference Reference 6826N6826N



6859N6859N

6823N6823N

6826N6826N

6813N6813N

6833N6833N



Part Number


6999N 4D95 S4D95

6207-31-1201 Stroke: 4.5276 Rod: 2.2441-2.2447 Main: 2.7559-.7565

Weight: 56 lbs.

6998N 4D95 S4D95L

6204-31-1110, 6204-31-1200

Stroke: 4.5276 Rod: 2.2441-2.2447 Main: 2.7559-.7565

Weight: 56 lbs.

5734N 4D102 3903827, 3907803, 3929036, J908031, J918323

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682


6997N 4D105 S4D105

6134-31-1100 Stroke: 4.527 Rod: 2.5957-2.5965 Main: 3.2256-3.2264

Weight: 85 lbs.

6901N 4D130 4D120

6110-33-1112, 6115-31-1110

Stroke: 6.299 Rod: 2.9516-2.9528 Main: 3.7394-3.7402

Weight: 190 lbs.

5733N 6D102 3907804, 3929037, 3907604, 3908032

Stroke: 4.724" Rod: 2.7160-2.7170" Main: 3.2672-3.2682"


6908N 6D95 S6D95

6206-31-1110, 6207-31-1110, 6207-31-1100

Stroke: 4.5276" Rod: 2.2441-2.2447" Main: 2.7559-2.7565"

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole Snout: 1 Bolt Hole, 1 Keyway Weight: 105 lbs.

6902N 6D105 S6D105

6136-31-1110, 6138-31-1110

Stroke: 4.921" Rod: 2.5957-2.5965" Main: 3.3426-3.3445"

Flange: Flat, 6 Bolt Holes Snout: 1 Bolt Hole, 1 Keyway Weight: 148 lbs.

6912N 6D108 6222-31-1110 Stroke: 5.1181 Rod: 2.7533-27539 Main: 3.7376-3.7382

Weight: 165 lbs.

6996N 6D110 6138-31-1010 Stroke: 4.921 Rod: 2.5957-2.5964 Main: 3.3437-3.3445

Weight: 150 lbs.

5735N 6D114 3917320, 3917443 3918986, 390562, 3914584, 728533

Stroke: 5.315" Rod: 2.9906-2.9926" Main: 3.8568-3.8588" Notes: Front timing gear has 42-teeth and is L/H helical.

Flange: Flat, 8 Bolt Holes, 1 Dowel Hole Snout: Straight, 4 Bolt Holes, 1 Keyway Weight: 174 lbs.


Weight: 275 lbs.


Weight: 345 lbs.

6900N 6D155 6127-31-1012, 6127-31-1011, 6127-31-1114

Stroke: 6.693 Rod: 3.8583 Main: 4.1732

Weight: 540 lbs.


Weight: 560 lbs.

KOMATSU



Part Number


7005N E6 456GC5113, 456GCF586

Stroke: 6.000 Rod: 2.9975-2.9980 Main: 3.9980-3.9990

Weight: 251 lbs.

7021N E7 12.0L

456CFG5128, 456CFG5137

Stroke: 6.500" Rod: 3.2470-3.2480" Main: 4.4966-4.4974"

Flange: Flat, 6 Bolt Holes, 1 Shallow Dowel Hole Snout: Straight, 1 Bolt Hole Weight: 290 lbs.

Part Number


7404N 3.152 Gas & Diesel

026005M1, 736532M91, 31312419, 84402, 31312436, 31312441 SD260034, U5BG0031, 31312700, ZZ90084 3637454M91, ZZ90116, 467, ZZ90148

Stroke: 5.000" Rod: 2.2484-2.2492" Main: 2.7485-2.7493" Notes: Uses bolt-on counterweights.

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Rope-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 52 lbs.

7418N 3.152

026053M, 94458, 31312701, 94464, 31312707, U5BG0027, 31315135, ZZ90078, 3637410M91, ZZ90150, ZZ90122, 637399M91

Stroke: 5.00" Rod: 2.2484-2.2492" Main: 2.7485-2.7493" Notes: Uses bolt-on counterweights.

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 52 lbs.

7424N 3.152 31312702, 31312704, 94463, 94459, ZZ90117

Stroke: 5.00" Rod: 2.2484-2.2492" Main: 2.7485-2.7493"

Flange: Flat, 6 Bolt Holes, 1 Dow-el Hole, Lip-Type Seal Snout: Splined, 1 Large Bolt Hole Weight: 52 lbs.

7427N 3.152 31312437, 84399 Stroke: 5.00" Rod: 2.2484-2.2492" Main: 2.7485-2.7493"

Flange: Flat, 6 Bolt Holes, 1 Dow-el Hole, Rope-Type Seal Snout: Splined, 1 Large Bolt Hole Weight: 52 lbs.

7433N AD3.152 70280077

Stroke: 5.000" Rod: 2.2484-2.2492" Main: 2.7485-2.7493" Notes: Used in Allis Chalmers 160.

Flange: Rope-Type Seal Snout: Splined

7423N

1103A 1103B 1103C 1103D Series

4181V017 Stroke: 5.00 Rod: 2.4986-2.4994 Main: 2.9982-2.9990

Flange: 6 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Splined, 3 Bolt Holes Weight: 52 lbs.

MACK.

PERKINS.



Part Number


7406N 4.108 ZZ90022, ZZ90124, ZZ90160, U5BG0056 31315824, 84417

Stroke: 3.50" Rod: 1.9993-2.0001" Main: 2.2480-2.2485"

Flange: Flat, 5 Bolt Holes, Rope-Type Seal Snout: 1 Bolt Hole, 2 Keyways Weight: 46 lbs.

7414N 4.203

026032M1, 94441, 31315181, 94454, 31315182, 94455, 31315184, ZZ90111, 742344M91

Stroke: 5.000" Rod: 2.2480-2.2490" Main: 2.7480-2.7490

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Splined, 1 Bolt Hole, 1 Keyway Weight: 55 lbs.

7415N 4.203 Stroke: 5.000" Rod: 2.2480-2.2490" Main: 2.7480-2.7490

Flange: Rope-Type Seal Snout: Splined Weight: 55 lbs.

7405N 4.203

026008M1, 3638473M91, 31315135, 742742M91, 31315138, 84407, 31315145, 85811, 31315148, 92484, 31315167, 92485, 31315184, U5BG0017, ZZ90121, U5BG0028, 3637399M91

Stroke: 5.000" Rod: 2.2480-2.2490" Main: 2.7480-2.7490

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Rope-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 54 lbs.

7426N 4.203

026032M1, 94441, 31315182, 94454, 31315184, 94455, 742344M91, Z90111, 026033, 3637458M91

Stroke: 5.000" Rod: 2.2480-2.2490" Main: 2.7480-2.7490

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 55 lbs.

7412N 4.212 D4.212

85719, ZZ90100, ZZ90076, 3637457M91, 737189M91

Stroke: 4.500" Rod: 2.4990-2.4995" Main: 2.9985-2.9990

Flange: Rope-Type Seal Snout: Splined, 1 Keyway Weight: 60 lbs.

7413N 4.212 D4.212

94430, ZZ90077, 3637453M91, 742873M91

Stroke: 4.500" Rod: 2.4990-2.4995" Main: 2.9985-2.9990

Flange: Lip-Type Seal Snout: Splined, 1 Keyway Weight: 60 lbs.

7408NCW 4.236 4.248

31315601, 31315663, 31315851, 31315881, 31315884, ZZ90108, 68050, 68609, 84421, 84422, U5BG0026

Stroke: 5.000 Rod: 2.4990-2.4995 Main: 2.9985-2.9990 Notes: Counterweighted.

Flange: Flat, 6 Bolt Holes, 1 Dowel Hole, Rope-Type Seal Snout: Splined, 1 Bolt Hole, 1 Keyway Weight: 75 lbs.

7408N 4.236 4.248

3637789M91, U5BG0054, 31315911, 31315921, 31315912, 84422, 85721, ZZ90093, 84421, 736829M91, 31315881, 68050, 31315884, 3639541M1

Stroke: 5.000 Rod: 2.4990-2.4995 Main: 2.9985-2.9990 Notes: Not counterweighted.

Flange: Flat, 6 Bolt Holes, No Dowel Hole, Rope-Type Seal Snout: Splined, 1 Bolt Hole, 1 Keyway Weight: 75 lbs.

PERKINS



PERKINS.

Part Number


7416N 4.236 4.248

31315631, 94433, 31315641, 94434, 31315664, 85821, U5BG0052, 26042, 31315871, ZZ90082, 31315881, ZZ90122, 73629M91

Stroke: 5.000 Rod: 2.4990-2.4995 Main: 2.9985-2.9990

Flange: 6 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Splined, 1 Bolt Holes, 1 Keyway Weight: 62 lbs.

7429N

4.236 4.248 1004.4 Phaser 90

ZZ90119, ZZ90202, 3637401M91, U5BG0024, 31315981, 31315982, 31315991, 94435, 94436, ZZ90082, ZZ90081, ZZ90143, 741747M1, 31315870, 31315980

Stroke: 5.00 Rod: 2.4990-2.4995 Main: 2.9985-2.9990 Notes: To ensure you receive the right crankshaft, please provide # of bolt and dowel holes in rear flange when ordering.

Flange: Lip-Type Seal Snout: Splined, 3 Bolt Holes, 1 Keyway Weight: 62 lbs.

7431N

1104A 1104C 1104D Series

ZZ90222, ZZ90239

Stroke: 5.00 Rod: 2.4986-2.4994 Main: 2.9982-2.9990

Flange: Lip-Type Seal, 1 Dowel Hole, 10 Bolt Holes Snout: Splined, 3 Bolt Holes Weight: 105 lbs.

7452N 404C Series Shibaura

115256750, 115256990

Stroke: 3.9370" Rod: 2.0458-2.0462" Main: 2.6755-2.6759"

Flange: Lip-Type Seal Snout: Tapered, Threaded Weight: 78 lbs.

7407N 6.354.2

31322317, 31325016, 31322301, 31325019, 31322302, 31325022, 31322321, 31325023, 31322322, 31325025, 31322351, 31325028, 31322421, 31325036, 31323202, 31325042, 31323207, U5BG0045, 31323251, ZZ90089, 31322361, 31322363, 31322364, 68063, 85727, 742150M1, 736902M1

Stroke: 5.000" Rod: 2.4988-2.4996" Main: 2.9984-2.9996"

Flange: Flat, 12 Bolt Holes, Rope-Type Seal Snout: Splined, 1 Large Bolt Hole, 1 Keyway Weight: 98 lbs.

7402N 6.354.2

31323261, U5BG0048, 31323262, ZZ90090, 94443, 94460, 94468, 742160M1, 742161M1

Stroke: 5.000" Rod: 2.4988-2.4996" Main: 2.9984-2.9996"

Flange: Flat, 12 Bolt Holes, 1 Dow-el Hole, Lip-Type Seal Snout: Splined, Keyed, 1 Bolt Hole Weight: 98 lbs.

7449N 6.354.4 6.372.4

U5BG0031, ZZ90113, 3637408M91

Stroke: 5.000" Rod: 2.4988-2.4996" Main: 2.9984-2.9996"

Flange: Rope-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 98 lbs.

7451N 6.354.4 A6.354.4 T6.354.4

31314021, 313111021, 68076, ZZ90086, 3637404M91, ZZ90113, 748751M1

Stroke: 5.000" Rod: 2.4988-2.4996" Main: 2.9984-2.9996"

Flange: Lip-Type Seal Snout: Keyed, 1 Bolt Hole Weight: 98 lbs.

7421N 6.354.4 1006 Phaser Series

3637019M91

Stroke: 5.000" Rod: 2.4988-2.4996" Main: 2.9984-2.9996" Notes: Does not have gear collar step. Induction hardened.

Flange: 11 Bolt Holes, 1 Dowel Hole, Lip-Type Seal Snout: Keyed, 3 Bolt Holes Weight: 98 lbs.

7432N 1106 Series

4225497M1, ZZ90213, ZZ90228, 3637019M1

Stroke: 5.00 Rod: 2.4986-2.4994 Main: 2.9982-2.9990

Flange: Lip-Type Seal, 2 Dowel Holes, 10 Bolt Holes Snout: Keyed, 3 Bolt Holes Weight: 98 lbs.



NOTES

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________

___________________________________________



Terms & Conditions

New products are warrantied by the manufacturer only (details available upon request). R.F. Equipment, Inc. and its subsidiaries provide no warranty or guarantee of any type, express or implied.

Non-new product(s) carry an inspection warranty only unless otherwise expressly stated in writing. All product(s) must be inspected before installation. By installing, the customer is accepting, completely and without reserve, the product(s) and all liability from the point of receipt forward.

Returns must be accompanied by a Return Materials Authorization (RMA) to ensure proper handling. Returns must be received within 30-days from the date of original invoice. Returns must be shipped back to R.F. Equipment, Inc. freight pre-paid and must arrive at our facility in

Like New condition. Returns are subject to a 15% restocking fee. Freight charges are non-refundable. Disputes are subject to the exclusive jurisdiction of Shiawassee County, Michigan. By placing an order with R.F. Equipment, Inc. or one of its subsidiaries, you are expressly accepting

without reserve all terms, conditions, policies, protocols and warranties (if applicable) of R.F. Equipment, Inc., its subsidiaries and all associated manufacturers and carriers. No signature or other confirmation is required.

Warranty Policies

NEW PRODUCTS: New product(s) are warrantied by the original manufacturer only. R.F. Equipment, Inc. and its subsidiaries do not offer any type of warranty or guarantee, express or implied, of any type. Due to the expansive product range offered by R.F. Equipment, Inc. and its subsidiaries and the vast number of manufacturers available to us, no specific guarantee or warranty can be outlined here. Please feel free to contact R.F. Equipment, Inc. for complete warranty details as they pertain to your specific product(s). Rest assured that regardless of the component or the manufacturer, we will be available to help you with any problems that may arise and to ensure that any warranty claims are properly submitted to their respective manu-facturer. At no time will any warrantable compensation exceed the original purchase price of the product(s) in question. NON-NEW PRODUCTS: Non-new product(s) carry an inspection warranty only unless otherwise expressly stat-ed in writing. With an inspection warranty, it is sole responsibility and discretion of the customer to inspect said product(s), prior to installation, to determine their usability. By installing, the customer is expressly accepting, completely and without reserve, the product(s) and all liability from the point of receipt forward. CLAIMS: Claims must be submitted to R.F. Equipment, Inc. in writing immediately following any issue and before attempting disassembly or repairs of any type. Any type of disassembly or repair, or a delay of notice, will void any applicable warranty (if applicable). R.F. Equipment, Inc. reserves the right to inspect all product(s) and com-ponents involved in any warrantable claim. All product(s) and components being returned for inspection must be sent freight pre-paid. At no time will any warrantable compensation exceed the original purchase price of the product(s) in question.

Receiving & Returns Protocol

Please be sure to inspect all packages and products for damage or signs of mishandling upon arrival. All damage, even suspected damage, must be reported to the delivering carrier at the time of delivery and then to R.F. Equipment, Inc. immediately following. All missing and damaged products must be reported to R.F. Equipment, Inc. within 7 days of receipt. Returns are accepted on a case-by-case basis and must be authorized by R.F. Equipment, Inc. beforehand. Under no circumstances will freight charges be refunded. Any shipments sent Freight Collect and any re-turns sent without a valid RMA will be refused. A 15% restocking fee will be charged on all returns unless expressly stated in writing in advance. All returns must be received un-used, never installed and in clean, unmarked, original packaging. All product(s) damaged in return shipping will not be refunded.

1445 E. Lansing Rd. Morrice, MI 48857 Toll Free: 800-828-6943 Local: 517-625-4440 Fax: 517-625-6425 E-mail: [email protected] WWW.DIESELCRANKS.COM

If you should come across an error within this catalog or if you have any input as to how we

can improve this publication, please feel free to

call us toll free at 800-828-6943 or email us at [email protected].

If we use your input, well send you some free R.F. swag for helping us improve our service.

Crankshaft Catalog

Documents

engine components

engine youre

engine kits

engine team

engine parts needs

line components

line of remanufactured

perkins engines