CRANE REBUILDS - HOFFMAN EQUIP · 2017. 11. 22. · GROVE RT600 BENT BOOM REPAIR BOOM TIP NOSE REPLACEMENT ROLLOVER ACCIDENT 6. Hoffman Equipment has the capabilities to perform these

REPOWER REBUILD REPAIRCRANE REBUILDS

Save as much as 50% over buying a new crane• All crane components and structures are inspected and measured against factory

specifications and are refurbished as needed.*

• All rebuilds are completed by Manitowoc Certified Structural Welders and Technicians.

• A full 12 month EnCORE warranty is provided on all Manitowoc parts and a 6 month warranty on all repairs completed under the Hoffman EnCORE Program.*

REfURBISh / REBUILD

Services• Line Boring and Facing

• Non-Destructive Testing (NDT)

• Factory & OEM Reman Component Exchange

• Jobsite Commissioning and Adjustments

Certifications• Manitowoc EnCORE Partner—Full access to all

Manitowoc engineering drawings and specifications

• Manitowoc Certified Structural Welders and Technicians

All modifications are factory preapproved to comply with OSHA regulation 1926.1412A.

*Minimum levels of refurbishment and benchmarks must be met in order to be approved as an EnCORE refurbished crane.

2

Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.

Manitowoc 888 Repower, Refurbish & Structural Repairs

Cummins 330hP Tier III Engine (4100 & 888)

Manitowoc 4100 Repower & Refurbish After

After

After

3

REPOWER & EMISSIONS Extend the life of your crane

• Factory approved Tier III engines comply with local regulations.

• All replacement engines adhere to OSHA repower modification regulations.

• Available DPF systems comply with jobsite & local regulations.

• Repowered engines are an economical solution for older models.

• Tier III engines can be shipped worldwide.

Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.

A Typical Active DPf System Includes:• One Button Regeneration

Cycle—Easily activate the regeneration cycle from the operator’s cab.

• Work time between required regeneration cycles is between 8 and 12 hours minimum.

• Only a 30 minute regeneration cycle takes place without the engine running.

• Quick disconnect filter mounting available, allowing filters to be mounted onto removable counterweight.

• Meets all NYC BAT emissions requirements and is California CARB certified.

A Typical Repower Includes:• OSHA complaint engine with

a 2 year or 2,000 mile warranty

• Engine control panel with diagnostics in operator's cab

• Electrical harness and junction box

• Instruments

• Drive lines

• Hydraulic components

• Hoses

• Charge air cooler

• Hoffman Equipment’s mechanical to electric throttle adapter

• Air filter package

• Optional engine mounted air compressor

• Radiator with optional steel piping

• Optional remote filter and oil drains for quick and easy regular service

4

Optional Steel Coolant Piping Optional Remote filter Mounting & Oil Drains

Cummins Control Panel in Operator’s Cab Cummins 330hP Tier III Engine (4100 & 888)

Mechanical to Electrical Throttle Adapter Active DPf System to Reduce Particulate Matter

5

• Hoffman works with Manitowoc’s EnCORE engineers, insurance representatives and crane owners to determine whether damaged components should be repaired or replaced.

• All post accident repairs are performed by Manitowoc Certified Structural Welders and Technicians.

• Hoffman installs only factory approved OEM components. Remanufactured components are used whenever possible.

fACTORy CERTIfIEDPOST ACCIDENT REPAIR

AfTER

GROVE RT600 BENT BOOM REPAIR

BOOM TIP NOSE REPLACEMENT

ROLLOVER ACCIDENT

6

Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.

Manitowoc EnCORE Partner locations in Piscataway & Williamstown, New Jersey

CAPABILITIES

Tools & Equipment• 15 Ton Overhead Crane

• 100 Ton Yard Crane

• 15 Ton Yard Crane

• Line Boring and Facing

• Hydraulic Presses

• Hydraulic Cylinder Repair

• Calibrated Welders

• Field Service and PM Trucks

• Mutlimillion dollar parts inventory

The Crane Experts• Manitowoc Certified Technicians

• Terex Crane Factory Trained Technicians

• Manitowoc Certified Structural Welders

• Thousands of Hours of Manitowoc Factory Training

• Crane Repair & Rebuild Experienced Technicians and Management

Authorized Distributor for these Crane Manufacturers

AMERICAN®

7

300 South Randolphville RoadPiscataway, NJ 08854Phone: 732-752-3600

2610 South Black Horse PikeWilliamstown, NJ 08094Phone: 856-875-0036

800-4-HOFFMAN (800-446-3362)[email protected]

Manitowoc EnCORE Partner Certified facilitiesREBUILD fACILITIES

North American Manitowoc EnCORE Partner Locations