Item # Description Qty 1) VK1111 Viking Knit All-in-One Tool Kit Each 2) VK2222 Wire Weaving Tool, 1/4" Rod w/6-Loop Head Insert Each 3) VK2233 Wire Weaving Tool, 1/2" Rod w/12-Loop Head Insert Each VK3333 Drawplate by Lazee Daizee ™ - 1/8" - 5/8" Each New! Item # Description Qty 4) RYW01 Round Your Wire Tool w/1.8mm Cup Bur Each 5) BUR18 1.8mm Cup Bur used with RYW01 Each Round Your Wire! Tool for Smoothing Wire Ends With its European quality cup bur, this simple to use tool is perfect for smoothing the rough & often sharp ends of cut beading wire. Round the end of rough or pointed wire with this cup bur tool. (A "cup bur" is a very small, cup-shaped file which works perfectly on the ends of wire to smooth sharp ends. You will get a lot of use out of this little tool!). Just twist the hardwood handle while holding the cup on the end of your wire. The cutting surfaces that smooth the wire are inside a 1.8mm cup. Designed for soft wire such as sterling silver, copper or gold-filled wires. Retail-Ready Packaging. Viking Knit All-in-One Tool Kit Drawplate and Wire Worker Tool also Sold Separately By Lazee Daizee ™ The Lazee Daizee ™ Viking Knit All-in-One Wire Weaving Tool Kit makes learning the centuries-old wire weaving technique easier than ever–no more start-up prep, dowels or vises. Just hold the tool in your hand & start weaving. Adding new wire is easy with the pre-drilled anchor hole & the hexagon-shaped rod limits the need for needle tools that may damage or scratch coated wires. Make your own wire-wrapped end caps with the End Coil Shaper. KIT INCLUDES: hex rod tool, easy-start head attachment, lightweight and durable thermoplastic draw plate, conditioning fabric, end coil shaper, pin tool, #20 & #26 gauge practice wires & color step-by-step photos and instructions. The Drawplate & Viking Knit Wire Weaving Tools are also available separately. All items come in retail-ready, hangable packaging. RYW01 4 BUR18 5 Close-up of cup bur VK1111 1 VK3333 Drawplate can be found on pg. 102 VK2233 3 VK2222 2 228A-500 6 228A-510 7 Artistic Wire ® Spiral Makers These Spiral Makers create perfect spirals out of Artistic Wire, German Style Wire & any other soft wire 20 ga (0.81mm) & smaller. Use colorful spirals to embellish jewelry, scrapbooks & paper crafts. Use small pieces of wire to use as washers on the three screws. Tighten wing nuts and insert the same gauge wire into the device. Center the wire in the center hole and insert the twister handle so the wire is inside the slit on the handle. Twist the handle until the desired size of coil is reached. Tip: count the number of turns to re-create the same size coils for multiple coils or perfectly matching earring dangles. Made in the USA. Item # Description Qty 6) 228A-500 Artistic Wire ® Spiral Maker Each 7) 228A-510 Artistic Wire ® Spiral Maker - Large Each New! New! 88 craft wire tools craft wire tools