Page 1 of 7 Micriμm μC/Probe on the Freescale Freedom without an RTOS Micriμm μC/Probe on the Freescale FRDM-KL05Z without an RTOS Introduction This document will guide you through the necessary steps to connect μC/Probe to any embedded application running on the FRDM-KL05Z Rev. B1 without any RTOS. The process involves the use of the onboard OpenSDA adapter. OpenSDA features a mass storage device bootloader, which provides a quick and easy mechanism for loading different OpenSDA applications such as flash programmers and run-control debug interfaces. Because the communication interface between μC/Probe and the FRDM-KL05Z is via this OpenSDA debugging unit, you do not require any special code running on the target and you gain instantaneous control over your global variables in a real-time and non-intrusive way. This guide requires the use of the following files found in the Quick Start Package for the FRDM-KL05Z: MSD-FRDM-KL05Z_Pemicro_v105.SDA OpenSDA application to program the flash. CMSIS-DAP_OpenSDA.S19 OpenSDA application that implements the CMSIS-DAP debugging interface. Micrium_FRDM-KL05Z_Baremetal.srec Precompiled example of Micriµm’s μC/Probe in S-record format. Micrium_FRDM-KL05Z_ Baremetal.out Precompiled example of Micriµm’s μC/Probe in ELF format. Micrium_FRDM-KL05Z.wspx Workspace example of Micriµm’s µC/Probe.
7
Embed
µC/Probe on the Freescale Freedom without an RTOSmicrium.com/probe/Micrium_FRDM-KL05Z_QSG.pdf · 2014-08-21 · Page 4 of 7 Micriµm µC/Probe on the Freescale Freedom without an
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 7
Micriµm µC/Probe on the Freescale Freedom without an RTOS
Micriµm
µC/Probe on the Freescale FRDM-KL05Z without an RTOS
Introduction
This document will guide you through the necessary steps to connect µC/Probe to any embedded
application running on the FRDM-KL05Z Rev. B1 without any RTOS.
The process involves the use of the onboard OpenSDA adapter. OpenSDA features a mass storage device
bootloader, which provides a quick and easy mechanism for loading different OpenSDA applications
such as flash programmers and run-control debug interfaces.
Because the communication interface between µC/Probe and the FRDM-KL05Z is via this OpenSDA
debugging unit, you do not require any special code running on the target and you gain instantaneous
control over your global variables in a real-time and non-intrusive way.
This guide requires the use of the following files found in the Quick Start Package for the FRDM-KL05Z:
MSD-FRDM-KL05Z_Pemicro_v105.SDA
OpenSDA application to program the flash.
CMSIS-DAP_OpenSDA.S19
OpenSDA application that implements the CMSIS-DAP debugging interface.
Micrium_FRDM-KL05Z_Baremetal.srec
Precompiled example of Micriµm’s µC/Probe in S-record format.
Micrium_FRDM-KL05Z_ Baremetal.out
Precompiled example of Micriµm’s µC/Probe in ELF format.
Micrium_FRDM-KL05Z.wspx
Workspace example of Micriµm’s µC/Probe.
Page 2 of 7
Micriµm µC/Probe on the Freescale Freedom without an RTOS
Quick Start Guide
The following steps will guide you through the process of loading the Micriµm’s precompiled example
and the CMSIS-DAP debug interface.
1. Download the Quick Start Package for the FRDM-KL05Z from the following link: