40 CP INSTALLATION AND USE Suitable for use with clean water and liquids that are not chemical- ly aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the ir- rigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. PATENTS - TRADE MARKS - MODELS • Registered Community Design n° 002098434 OPTIONALS AVAILABLE ON REQUEST • Special mechanical seal • Other voltages or 60 Hz frequency • IP X5 class protection for CP 170, CP 170M GUARANTEE 2 years subject to terms and conditions PERFORMANCE RANGE • Flow rate up to 160 l/min (9.6 m³/h) • Head up to 56 m APPLICATION LIMITS • Manometric suction lift up to 7 m • Liquid temperature between -10 °C and +90 °C • Ambient temperature up to +40 °C • Max. working pressure: – 6 bar for CP 100-130-132-150-158 – 10 bar for CP 170-190-200 • Continuous service S1 CONSTRUCTION AND SAFETY STANDARDS EN 60335-1 IEC 60335-1 CEI 61-150 EN 60034-1 IEC 60034-1 CEI 2-3 REGULATION (EU) N. 547/2012 CERTIFICATIONS Centrifugal pumps
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
40
CP
INSTALLATION AND USESuitable for use with clean water and liquids that are not chemical-ly aggressive towards the materials from which the pump is made.As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the ir-rigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
PATENTS - TRADE MARKS - MODELS • Registered Community Design n° 002098434
OPTIONALS AVAILABLE ON REQUEST • Special mechanical seal • Other voltages or 60 Hz frequency • IP X5 class protection for CP 170, CP 170M
GUARANTEE 2 years subject to terms and conditions
PERFORMANCE RANGE • Flow rate up to 160 l/min (9.6 m³/h) • Head up to 56 m
APPLICATION LIMITS • Manometric suction lift up to 7 m • Liquid temperature between -10 °C and +90 °C • Ambient temperature up to +40 °C • Max. working pressure:
– 6 bar for CP 100-130-132-150-158 – 10 bar for CP 170-190-200 • Continuous service S1
CONSTRUCTION AND SAFETY STANDARDSEN 60335-1IEC 60335-1CEI 61-150
EN 60034-1IEC 60034-1CEI 2-3
REGULATION (EU) N. 547/2012
CERTIFICATIONS
Centrifugal pumps
41
η = 38.5%
η = 32%
η = 34%η = 43%
η = 41%
η = 45.5%
η = 53.5%η = 38%
η = 41%
Flow rate Q 4
Hea
d H
(met
res)
4
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 1/min HS= 0 m
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3.
CP 130 2.0 A 1.2 A 1.8 A 1.1 ACP 132A 2.9 A 1.7 A 2.4 A 1.4 ACP 150 4.2 A 2.4 A 4.1 A 2.4 A
CP 158® 4.4 A 2.5 A 4.3 A 2.5 A
CP 170 - 170M 5.2 A 3.0 A 5.1 A 2.9 ACP 190 7.5 A 4.3 A 7.3 A 4.2 ACP 200 9.3 A 5.4 A 9.0 A 5.2 A
MODEL VOLTAGE (single-phase)
Single-phase 230 V 240 V 110 V
CPm 100 1.9 A 1.55 A 3.3 ACPm 130 3.2 A 2.9 A 6.4 ACPm 132A 3.5 A 3.2 A 7.0 ACPm 150 5.7 A 5.4 A 11.4 A
CPm 158® 6.0 A 5.8 A 12.0 A
CPm 170 - 170M 7.8 A 7.2 A 16.0 ACPm 190 11.0 A 10.0 A 22.0 A
8001200
H
REGULATION (EU) N. 547/2012
• Minimum efficiency index MEI ≥ 0,10 for water pumps according to the (EU) Regulation current from the 1th of January 2013.
• The benchmark for most efficient water pumps is MEI ≥ 0,70.
• The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller dia-meter. The trimming of the impeller will adapt the pump to a fixed duty point, leading to reduced energy con-sumption. The minimum efficiency index (MEI) is based on the full impeller diameter.
• The operation of this water pump with variable duty points may be more efficient and economic when controlled, for example, by the use of a variable speed drive that matches the pump duty to the system.
• Information on benchmark efficiency is available www.europump.org/efficiencycharts.