Course Introduction

Production Engineering II

2013 INSTITUTE OF TECHNOLOGY PETRONAS SDN BHD

All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted in any form or by any

means (electronic, mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.

PCB-3073 PRODUCTION ENGINEERING II

Semester 3/2

By :

Dinesh Kanesan

([email protected])

Tel No : 05 368 7295

Room No : 14.03.35

PROGRAMME OUTCOMES

The three major programme outcomes are:

PO-1: Ability to apply knowledge of engineering fundamentals in solving complex petroleum engineering problems

supplemented by specialization know-how.

PO-2: Ability to undertake problem identification, formulation and solve complex petroleum engineering issues using

engineering, science and mathematical principles.

PO-3: Ability to design complex petroleum engineering components and systems while considering possible public health and

safety, cultural, societal, and the environmental impact.

COURSE LEARNING OUTCOMES

At the end of this course, students should be able to :

1. Explain various types of offshore structures [PO-1]

2. Propose suitable processes and treatment equipment to

manage produced oil, gas and water [PO-2]

3. Perform standard engineering calculations for the design of

separators, pumps, compressors and pipelines [PO-3]

COURSE CONTENTS

Introduction Exploration & Production Business Exploration & Production Costs Licensing Agreements Production Sharing Contract Terms Malaysian Models

Field Development Concept Fixed Platform,Jackets, Compliant Towers, Gravity Based Structures, Jack Up

Rigs.

Floating Platforms, Tension Leg Platforms, Semi Submersible, Spars and Floating Production Systems

Facilities Requirements Integrated Development Systems Energy Consumption On Offshore Facilities

Oil and Gas Production Processes Oil Production Process Gas Production Process

COURSE CONTENTS

Separation Process Two Phase Separation Concept Three Phase Separation Concept Separator Sizing

Transportation and Storage Pipeline Design and Sizing Pumps and Compressors Storage Sizing

Water Handling Chemical Properties of Formation / Produced Water. Produced Water Treatment Disposal of Produced Water

Oil and Gas Field Operations Management of Uncertainty in Production Operations Management and Optimization of Production Operations. Environmental Effect of Production Operations

COURSE PLAN

Topic Week (s)

Introduction 1

Field Development Concept 2

Oil and Gas Production Processes 3-5

Separation Process 6-9

Transportation and Storage 10-12

Water Handling 13

Oil and Gas Field Operations 14

ASSESSMENT PLAN

Assessment Score (%)

Quizzes 10

Assignments 10

Test 1 15

Test 2 15

Final Exam 50

Total 100

REFERENCES

Main References

1. Ken Arnold, Maurice Stewart (1999), Surface Production Operations: Design

of Oil-Handling Systems and Facilities,2nd Edition, Gulf Publishing Company.

2. Ken Arnold, Maurice Stewart (1999), Surface Production Operations: Design

of Gas-Handling Systems and Facilities, 2nd Edition, Gulf Publishing

Company

Optional References

1. John L. Kennedy (1993), Oil and Gas Pipeline Fundamentals, 2nd Edition,

PennWell Publishing.

2. A.P. Szilas (1995), Production and Transport of Oil and Gas,2nd Edition,

Elsevier Science B.V.

CLASS POLICY

Attendance/Punctuality

Plagiarism

Honesty & Commitment

Adherence to Datelines(Submission of

Assignments)

Tutorials/Examples/Extra Help (Team spirit)

E-Learning

LECTURE TIMES

Day: Tuesday

Time: 3.00 5.00pm

Day: Thursday

Time: 10.00 11.00am

THANK YOU 2013 INSTITUTE OF TECHNOLOGY PETRONAS SDN BHD

All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted in any form or by any means (electronic,

mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.