RTO 51178 COURSE BROCHURE UEE42211 CERTIFICATE IV IN INSTRUMENTATION AND CONTROL 15 Years of Vocational Training Experience † Career Oriented † Affordable † Nationally Recognised Project Management Vision
RTO 51178
COURSEBROCHURE
UEE42211
CERTIFICATE IV IN INSTRUMENTATION
AND CONTROL
15 Years ofVocational
Training Experience
† Career Oriented
† Affordable
† Nationally Recognised
Project Management Vision
$
† To enhance the participants PLC and Process Instrumentation skills† To enhance the participants digital and analog electronic problem-solving skills† To enhance the participants testing, fault finding and commissioning systems† To give participant's an edge to enter into the oil and gas or mineral processing
industry which uses PLC interfaces with HART compliant field instrumentation.OBJECTIVES
OUTCOME
SCOPE
A) Full qualification – UEE42211 Certificate IV in Instrumentation and ControlCandidates who hold an UEE31211 – Certificate III in instrumentation and Control and are successfully competent in both theoretical and practical training, completing all units of competency in the training package, will receive the full qualification.
B) Statement of Attainment (SOA) – UEE42211 Certificate IV inInstrumentation and ControlThis Statement is issued to a student who has successfully completed one or more units of competency but does not meet the requirements for a full qualification e.g. Graduate Electrical Engineers.
This qualification provides competencies to select, install, set up, test, fault find, repair, maintain and commission systems and devices for measurement and recording of physical/chemical phenomenon and related process control systems
CERTIFICATE IV IN INSTRUMENTATION AND CONTROL
UEE42211
LOCATIONCOURSE DURATION 6 Days + 6 Days
COURSE COST$4,500 Training centers at
Perth, Brisbane, Adelaide,or at Client's facility
08 9317 2146 [email protected] www.pmv.net.au
Project ManagementVision
All candidates interested in learning or up-skilling their PLC programming, HMI, and HART field Instrumentation skills in calibration, testing and fault finding are encouraged to undertake this post-trade professional development gap training course.
PRE-REQUISITES A current electrical license (any Australian state or territory) or UEE31211 – Certificate III in instrumentation and Control, is preferred but not essential.
http://training.gov.au/Training/Details/UEE42211
TARGETWORKFORCE
LOCATION
Delivered at one of PMV's national training centres in Perth, Brisbane and Adelaide, or at a client's facility
TRAININGMETHOD
COURSE STRUCTURE
Blended delivery of 40% theory and 60% practical training with equipment that you are likely to see in a typical modern industrial control environment with HART rated instrumentation, final control elements with PLC control system.
TRAININGCONTENT
You will undergo one on one practical training with industry experienced, qualified Instrument and Control System Professional Trainers. The training would include the following technologies on a purpose-built instrumentation skid/ facilities and control system with HART compliant field instruments, Siemens or Allen Bradley PLC Control System:
1. Pressure (suppression/elevation of transmitter)2. Level Radar / Ultrasonic configuration3. Diagnose and rectify faults in digital controls systems4. Flow – configuration and control including Magnetic flow meter operation5. Calibration of Temperature loops with RTD and Thermocouples6. Calibration of Flow Control through a Pump or Control valves and operation
and working with Variable Speed Drive (VSD)7. Program digital and analog Siemens or Allen Bradley PLC. Download, test and
fault find PLC program on PLC hardware8. Configuration of smart devices via HART Modem and Hand-Held Configurator,9. Reading P&ID and 2 and 4 Wire loop drawings. Verify the drawings against as
installed equipment10. Calibration of the field instruments; installing instruments; fault finding;11. Fault find and repair analogue circuits and components in electronic control
systems
PMV offers a small size class with flexible training to accommodate difficult rosters / work schedules.
CERTIFICATE IVIN INSTRUMENTATION
AND CONTROL
08 9317 2146 [email protected] www.pmv.net.au
Project ManagementVision
WHY PMV?
† Fast tracked gap training (6days + 6days) to allow for student’s busy schedule † All the courses have been developed in consultation with industry experts † You will undergo one on one practical training with industry experienced,
qualified Instrument and Electrical Professional Trainers† Training is aligned to the requirements of latest industry trends and
standards.
08 9317 2146 [email protected] www.pmv.net.au
Project ManagementVision
UEENEEC038B
UEENEEE101A
UEENEEE102A
UEENEEE104A
UEENEEE105A
UEENEEE107A
UEENEEE119A
UEENEEE117A
UEENEEE124A
UEENEEE137A
UEENEEI101A
UEENEEI102A
UEENEEI103A
UEENEEI104A
UEENEEI105A
UEENEEI106A
UEENEEI107A
UEENEEI108A
UEENEEI110A
UEENEEI111A
UEENEEI112A
UEENEEI113A
UEENEEI124A
UEENEEI139A
UEENEEI150A
UEENEEK145A
UEENEEP013A
PMV Training
Electrical License
Electrical License
Electrical License
Electrical License
Electrical License
UEE31211
PMV Training
PMV Training
Electrical License
UEE40411
UEE40411
UEE40411
UEE40411
UEE40411
UEE31211
UEE31211
UEE31211
UEE31211
UEE31211
UEE31211
UEE31211
PMV Training
PMV Training
UEE40411
PMV Training
UEE31211
Participate in development and follow a personal competency development plan
Apply Occupational Health and Safety regulations, codes and practices in the workplace
Fabricate, assemble and dismantle utilities industry components
Solve problems in D.C. circuits
Fix and secure electro technology equipment
Use drawings, diagrams, schedules, standards, codes and specifications
Solve problems in multiple path extra low voltage (ELV) A.C. circuits
Implement and monitor energy sector OHS policies and procedures
Compile and produce an energy sector detailed report
Document & apply measures to control OHS risks associated with electro technology work
Use instrumentation drawings, specification, standards and equipment manuals
Solve problems in pressure measurement components and systems
Solve problems in density/level measurement components and systems
Solve problems in flow measurement components and systems
Solve problems in temperature measurement components and systems
Set up and adjust PID control loops
Install instrumentation and control cabling and tubing
Install instrumentation and control apparatus and associated equipment
Set up and adjust advanced PID process control loops
Find and rectify faults in process final control elements
Verify compliance and functionality of instrumentation and control installations
Setup and configure human-machine interface (HMI) and industrial networks
Fault find and repair analogue circuits and components in electronic control systems
Diagnose and rectify faults in digital controls systems
Develop, enter and verify discrete control programs for programmable controllers
Implement & monitor energy sector environmental and sustainable policies & procedures
Disconnect - reconnect control devices connected to low voltage installation wiring
Core Competency Standard UnitsAll Core competency standard units to be achieved Delivery Method
CERTIFICATE IVIN INSTRUMENTATION
AND CONTROL
UEENEED104A
UEENEEI122A
UEENEEI114A
UEENEEI117A
UEENEEI151A
PMV Training
PMV Training
PMV Training
PMV Training
PMV Training
Use engineering applications software on personal computers
Assist in commissioning process and instrumentation control systems
Trouble shoot process control systems
Calibrate, adjust and test measuring instruments
Develop, enter & verify word & analogue control programs for programmable logic controllers.
Delivery Method
Project ManagementVision
Project ManagementVision
Perth10/22 Shields Crescent Booragoon, WA 6154Tel: (08) 9317 2146 and (08) 9317 2147
BrisbaneUnit 14, 720 MacArthur Ave Central, Pinkenba, QLD, 4008 Tel: (07) 3255 5952
Adelaide1042 Port Road, Albert Park, SA, 5014 Tel: (08) 9317 2147
Group A, B & C – Qualification Elective Units
CERTIFICATE IVIN INSTRUMENTATION
AND CONTROL