TRANSMISSION www.regalaustralia.com.au POWER TRANSMISSION Coupling Product Guide
TRA
NSM
ISSI
ON
www.regalaustralia.com.au
POWER TRANSMISSION
Coupling Product Guide
WOULD YOU
LIKE A COUPLING
WITH THAT?
LOCATION TELEPHONE FACSIMILEVIC Rowville 0397554444 0397554411NSW Wetherill park 0287813140 0287813131NT Winnellie 0889472633 0289471499QLD Archerfield 0732751717 0732751818
SA Pooraka 0883591321 0883595675TAS Devonport 0364248574 0364249393WA Welshpool 0894586088 0894587088
Geared to drive Australian industry 1300139102transaus.com.au
WITH OUR WIDE RANGE OF COUPLINGS INCLUDING:ESCOGEAR&DISCREXNORDOMEGAWINFLEXGRIDWESTCARFLUID
POONASAMIFLEXELASTOMERICMAYRSMARTFLEXHRC,CHAIN&TYRE
WE CAN SELECT A COUPLING TO SUIT YOUR APPLICATION
SALES 1300 888 853 www.regalaustralia.com
ESCO FST• Heavy duty, robust gear coupling• Multi crown gearing• Torque range: up to 540,000 Nm• Bore: up to 1,130 mm
ESCO NST• The most economical steel gear coupling• Continuous sleeve basic design• Torque range: up to 2,000 Nm• Bore: up to 65mm
ESCO CST• Greatest ratio torque / O.D. on the market• Simplicity: only a few components (7)• Torque range: up to 17,000 Nm• Bore: up to 110 mm
ESCO CST M• Generation 2001• Heavy duty, robust gear coupling• Multi crown gearing• Continuous sleeve design• Torque range: up to 348,000 Nm• Bore: up to 290 mm
ESCO FRR• Rigid coupling• Torque range: up to 348,000 Nm• Bore: up to 330 mm
SALES 1300 888 853 www.regalaustralia.com
SALES 1300 888 853 www.regalaustralia.com
ESCO DMUCC• Close coupled version with split spacer • API 610 standard• Torque range: up to 19,800 Nm• Bore: up to 170 mm
ESCO DMU• Multi disc pack• API 610 standard • Torque up to 260,000 Nm• Bore: up to 370 mm
ESCO DPU• Multi disc pack with sandwich flange concept• Anti-spark (optional) API 610 Standard, 671 (optional)• Torque range: up to 23,000 Nm• Bore: up to 220 mm
OMEGA®
• Close coupled elastomeric couplings • Compact design - ease of assembly / disassembly, in situ• Torque range: up to 38,442 Nm• Bore: up to 229 mm
ESCO DLC• Single disc version• Low to medium duty applications• No Fretting corrosion or buckling• Torque range: up to 1,600 Nm• Bore: up to 105 mm
SALES 1300 888 853 www.regalaustralia.com
ROBA®-DS Backlash Free all steel coupling• Steel disc coupling with a wide choice of mounting options• Torques from 35 to 110,000 Nm• Very high torsional rigidity• Compact, with high performance density• Bores up to 250 mm• Can be combined with an overload clutch
ROBA®-DS Servo coupling• Torques from 35 to 150 Nm• Extremely robust servo coupling – backlash free• Low moment of inertia for highly dynamic drives• Deliver high torques in a small low weight package• Can be combined with an overload clutch
smartflex®-Steel Bellows coupling• Torques from 16 to 700 Nm• A flexible modular structure minimises stock
holding and provides quick availability• Bores up to 85 mm
CMD WINFLEX T• Flexible grid coupling 100% steel coupling• Compact design - ease of assembly• Torque range: up to 800,000 Nm• Bore: up to 390 mm
CMD WINFLEX DG• Tapered grid coupling 100% steel coupling• High torque capacity• Compact design - ease of assembly• Torque range: up to 186,000 Nm• Bore: up to 360 mm
SALES 1300 888 853 www.regalaustralia.com
SALES 1300 888 853 www.regalaustralia.com
SAMIFLEX• Special polyurethane elastomer element - wraps in between hubs• The two hubs work independently of each other, no metal to metal
contact on destruction of element - allows for easier maintenance, easy to remove element allows shafts to spin independently
• ATEX approved designs available• Variety of other designs available including spacer• Torque range up to 200,000 Nm• Bores of up to 300 mm
JAW• The most common shaft to shaft jaw coupling around
with star shaped spider• Made to industry standard• Also available in “snap wrap” and spacer design• Ideally suited to pump applications• Pre bored hubs stocked in popular sizes• Torque range up to 317 Nm• Bores available up to 65 mm
POONA HTB coupling• High temperature blind assembly coupling• Designed for mounting inside bell housing applications• Intrinsically fail safe• Mounts to standard SAE flywheel, coupling to shaft• Torque range from 1200 Nm to 40,000 Nm• SAE flywheel sizes SAE 11.5 to SAE 21
POONA RB coupling• SAE flywheel flange to shaft mounting• Shaft to shaft versions or Mill motor coupling• Severe shock load protection• Intrinsically fail safe• Zero backlash• Low cost• Torque range from 1200 Nm to 40,000 Nm
HRC coupling• Suitable for all general purpose coupling applications• Shaft connection is “fail safe” due to interacting jaw design• Can accommodate a high degree of misalignment• Torques from 31 to 3,150 Nm• Bores up to 115 mm• Simple design, easy installation and value for money• Available in taper lock design or pilot bore
REGAL BELOIT AUSTRALIA Pty LtdABN 61 122 303 084
VICTORIA19 Corporate AvenueRowville VIC 3178Tel: +61 (0)3 9237 4040 Fax:+61 (0)3 9237 4050
NEW SOUTH WALESSYDNEY6-7 Bushells PlaceWetherill Park NSW 2164Tel: +61 (0)2 8781 3100 Fax:+61 (0)2 8781 3131
NEWCASTLE3/11 Kinta DriveBeresfi eld NSW 2320Tel: +61 (0)2 4028 6407Fax:+61 (0)2 4028 6437
HEAD OFFICE
© Regal Beloit Australia Pty Ltd All information supplied in this publication is accurante at time of printing. Subject to change at any time without prior notice.
QUEENSLANDBRISBANE7 Mahogany CourtWillawong QLD 4110Tel: +61 (0)7 3246 3246Fax:+61 (0)7 3246 3210
CAIRNS (“Service - Repairs - Sales”)2/159-161 Newell StreetBungalow QLD 4870Tel: +61 (0)7 4033 1109 Fax:+61 (0)7 4033 5553
MACKAYCnr. John Vella Drive & Connors RoadPaget Mackay QLD 4740Tel: +61 (0)7 4952 6244 Fax:+61 (0)7 4952 6277
SOUTH AUSTRALIA47 Research RoadPooraka SA 5095Tel: +61 (0)8 8359 1321Fax: +61 (0)8 8359 5675
WESTERN AUSTRALIA21 Colin Jamieson DriveWelshpool WA 6106Tel: +61 (0)8 6253 3700Fax:+61 (0)8 6253 3710
TASMANIA115 Don RoadDevonport TAS 7310Tel: +61 (0)3 6424 8574Fax:+61 (0)3 6424 9393
19 Corporate Ave / PO Box 2340Rowville VIC 3178 AUSTRALIA
Tel: +61 (0)3 9237 4000Fax:+61 (0)3 9237 4010
AUSTRALIASales1300 888 853Drives Technical Support 1800 676 722www.regalaustralia.comwww.regalbeloit.com
NEW ZEALANDCMG Electric Motors (NZ) Ltd18 Jomac PlaceAvondale AucklandNEW ZEALANDTel: +64 9820 3550Fax: +64 9820 8504
SINGAPORECMG Elecric Motors(Asia Pacifi c) Pte Ltd12 Tuas Loop 637346SINGAPORETel: +65 6863 3473Fax: +65 6863 3476
THAILANDFASCO Motors (Thailand) Limited29/7-8 Bangkruay-Sainoi Road Bangkrang, Muang Nonthaburi District Nonthaburi 11000 THAILAND Tel: +66 2447 3300Fax: +66 2447 3500
MALAYSIARegal Beloit (dba Torin dba CMG)No. 6536A Jalan Bukit KemuningBatu 6 Seksyen 3440470 Shah Alam SelangorTel: +60 3 51246157Fax: +60 3 51211467
www.regalaustralia.com.auRegal | Couplings Product Guide 1113 (1.1.0)
Pin & Bush coupling• Torsionally elastic with the ability to dampen and
eliminate shocks and vibration• The flexible element consists of tapered rubber
rings mounted on steel pins• Replacement rings, pins and nuts are also available
as spare parts• Torques from 53 Nm to 16,000 Nm• Bores up to 150 mm• Available in taper lock design or pilot bore