8/3/2019 CORTEX Catalog 2010 Edi2
1/28
CATALOG
8/3/2019 CORTEX Catalog 2010 Edi2
2/28
8/3/2019 CORTEX Catalog 2010 Edi2
3/28
INTRODUCTION Page 4
IMPLANTS
ABUTMENT
Individual abutments Page 14
Abutments for screw components Page 18
Ball attachments and components Page 19
Locator abutments and components Page 20
IMPRESSION COPYING
Impression components Page 22
Analogs Page 23
SURGICAL KITS
CORkit Basic Page 24
CORkit Premium Page 25
CORkit Prime Page 25
TOOLING
Surgical instruments Page 26
Page 6 Page 8
3
INDEX
Page 10 Page 12 Page 13
8/3/2019 CORTEX Catalog 2010 Edi2
4/28
INTRODUCTION
Cortex was founded in 2007 by a group of entrepreneurs, specialists in Maxillo Facial surgery, dentists,
and other professional experts, all of whom have accumulated many years experience in surgery,
consulting and training in others implant manufaturers worldwide.
What has brought all these people together into a single group, is the vision, and the ambition, of
founding an implant company which will offer innovative products embodying the worlds most advanced
techniques of design and finishing while at the same time giving maximum consideration to the needs of
the clinician working in the field of dental implants.
The targets which Cortex has set itself are as follows:
1. To offer innovative and patent-protected products.
2. To achieve the greatest possible precision in fitting the components which it produces.
3. To produce the cleanest possible surfaces, with the best possible morphology for osseointegration.
4. To produce an easy-to-use package, which will meet the strictest of sterilization standards.
5. To include in the package all the components required, to enable the practicing clinician to adopt
whatever strategy he chooses, during the surgical procedure.
6. To simplify surgical and recovery procedures as far as possible.
7. To establish training frameworks, to reinforce the confidence of clinicians.
8. To share the knowledge and experience of clinicians worldwide.
CORTEX IMPLANTSCortex Implants are manufactured from Titanium alloys (Ti6Al4V- ELI).
Material highly successful for the fabrication of dental implants due to is combination of mechanical properties such as low specific weight, high
strength/weight ratio, high modulus of elasticity, high corrosion resistance and excellent general biocompatibility.
The Cortex manufacturing implants operate in conformity with ISO Standard 2001, and with ISO 13485 (medical). They have undergone inspection of
European Notified Body (CE 0473) for approval of the design, manufacture, and quality assurance systems of Cortex Implants, prosthetic components,
and surgical tools. The companys products also have the approval of the U.S. FOOD AND DRUG ADMINISTRATION (FDA). At the present time, the
Cortex Co. is completing registration and regulatory procedures in a number of other countries.
Surface area of Cortex Implants
The reaction of the bone to the implant is determined by the load, the morphology and by the modification
of the surface chemistry in the nano scale.
The roughness and microgeometry are achieved by sandblasting and acid etched.
This surface developed with the collaboration of University, improve the bone contact implant surface
(BIC) by increasing the envelope surface by 3 or 4 and improve the mechanical anchorage of the cells.
AMAR
4
8/3/2019 CORTEX Catalog 2010 Edi2
5/28
Laboratory tests
Cortex carries out all the necessary laboratory tests and trials to ensure that production is of the highest possible quality.
The company works continually with Universities and Professional Research Laboratories worldwide testing its implants or standards of precision of
manufacture, materials fatigue, sterilization, chemical composition of metals and surfaces.
One of the major factors in good osseointegration is the cleanliness of implant surfaces.X.P.S. testing has shown that the surfaces of Cortex implants are extremely clean, and that the components of greatest importance for osseointegration
(titanium and oxygen) are present in them in a very high percentage a fact which further confirms the superior surface qualities of Cortex dental implants.
All the companys products are marked with batch numbers, and all raw materials are monitored from the moment of their arrival in
the manufacturing plant.
All products are subject to strict quality control at all stages of production.
Cortex products undergo a very severe sterilization procedure exposure to gamma rays at an intensity of 2.5 M.R. I.D., in
accordance with the strictest requirements of the regulatory bodies, which have allowed Cortex implants a 5 year period of validity.
The company has sufficient confidence in the quality of its implants and prosthetics, to offer them with a 15 year guarantee, on
condition that they are used according to the companys instructions and regulations.
5
DYNAMIX L11.5 D3.8
YYYY-MM
0473
For single use only
Lot Number
Expiry date
Reading instruction before using
Caution, consultaccompanying documents
1005025A
8/3/2019 CORTEX Catalog 2010 Edi2
6/28
Milling Tunnels
Locking Elements
Following are the majors advantages of the new ClassiX implant
IMPLANTS
Optimal bone grip & compression Vertical and horizontal bone compression causing
active bone contact all through the implant
Excellent bone penetration
capabilities
Two threads starts and three milling
cutting edges Easybonepenetration
Precisecutting
Squareshapedthreadtype
Improvedbonecondensation
Bonepreservation
Largersurfaceareaforexcellent contact
High initial stability
Implanttoppartfourthreads:
Twocontinuingofthebasethreadsandtwonew threads
Extracorticalbonegrip
Thickening and square shaped threads
providehighbonegripandinitialstability
Patentpending-Locking elements- extraresistanceforanti-rottationalforces
Horizontal Bone Compression by squareshaped threads applying horizontal pressure
Vertical Bone Compression by gradualthickening of the thread
6
8/3/2019 CORTEX Catalog 2010 Edi2
7/28
3.75 3.75 3.75
3.8 4.2 5
Abutment Soft Tissue
Bone
Classix Sizes & Dimentions
mm L = 8 mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm
L
= 3.3 mm - - PCSC-1033 BCSC-1033 PCSC-1133 BCSC-1133 PCSC-1333 BCSC-1333 PCSC-1633 BCSC-1633
= 3.8 mm PCSC-0838 BCSC-0838 PCSC-1038 BCSC-1038 PCSC-1138 BCSC-1138 PCSC-1338 BCSC-1338 PCSC-1638 BCSC-1638
= 4.2 mm PCSC-0842 BCSC-0842 PCSC-1042 BCSC-1042 PCSC-1142 BCSC-1142 PCSC-1342 BCSC-1342 PCSC-1642 BCSC-1642
= 5.0 mm PCSC-0850 BCSC-0850 PCSC-1050 BCSC-1050 PCSC-1150 BCSC-1150 PCSC-1350 BCSC-1350 - -
= 6.0 mm PCSC-0860 BCSC-0860 PCSC-1060 BCSC-1060 PCSC-1160 BCSC-1160 PCSC-1360 BCSC-1360 - -
Drilling sequence : Soft bone - Type III, IV
Markingdrill
Pilot2.0mm
Implant3.3mm 2.8mm
Implant3.8mm 3.2mm
implant4.2mm 3.8mm
implant5.0mm
Drilling sequence : Dense bone - Type I, II
Markingdrill
Pilot2.0mm 2.8mm
Implant3.3mm 3.2mm
Implant3.8mm 3.8mm
implant4.2mm 4.2mm
implant5.0mm
IMPLANTS
Switching platform All implants top diameter are equal
Due to the switching platform geometry the
diameter at the abutment connection ofthe implant is reduced and lateralize themicro-gap
Better for soft tissue adaptation andreduce bone resorption
7
8/3/2019 CORTEX Catalog 2010 Edi2
8/28
3.75 3.75 3.75
54.23.8
Abutment Soft Tissue
Bone
Locking Slots
Following are the majors advantages of the new DynamiX implant
IMPLANTS
Outstanding bone
penetration capabilities Double thread and optimal pitch
(gap) for efficient implantation
Switching platform All implants top diameter are equal
3.75 mm
Due to the switching platform
geometry the diameter at the
abutment connection of the implant
is reduced and lateralize the
micro-gap
and reduce bone resorption
Cutting Thread
Optimal bone grip &
compression
Vertical and horizontal bone
compression causing high bone contactall through the implant
Vertical Bone Compression
by gradual thickening of the square
shaped threads
Horizontal Bone Compression by
the conical configuration of the (body)
Fixture
8
8/3/2019 CORTEX Catalog 2010 Edi2
9/28
Dynamix Sizes & Dimentions
IncorrectPre-drill
2 PassiveRings
4 Threads
mm L = 6 mm L = 8 mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm
L
= 3.8 mm - - PCSD-0838 BCSD-0838 PCSD-1038 BCSD-1038 PCSD-1138 BCSD-1138 PCSD-1338 BCSD-1338 PCSD-1638 BCSD-1638
= 4.2 mm - - PCSD-0842 BCSD-0842 PCSD-1042 BCSD-1042 PCSD-1142 BCSD-1142 PCSD-1342 BCSD-1342 PCSD-1642 BCSD-1642
= 4.5 mm PCSD-0645 BCSD-0645 - - - - - - - - - -
= 5.0 mm PCSD-0650 BCSD-0650 PCSD-0850 BCSD-0850 PCSD-1050 BCSD-1050 PCSD-1150 BCSD-1150 PCSD-1350 BCSD-1350 - -
= 6.0 mm PCSD-0660 BCSD-0660 PCSD-0860 BCSD-0860 PCSD-1060 BCSD-1060 PCSD-1160 BCSD-1160 PCSD-1360 BCSD-1360 - -
Drilling sequence : Soft bone - Type III, IV
Markingdrill
Pilot2.0mm 2.8mm
Implant3.8mm 3.2mm
Implant4.2mm 3.8mm
implant5.0mm 4.2mm
implant6.0mm
Drilling sequence : Dense bone - Type I, II
Markingdrill
Pilot2.0mm 2.8mm 3.2mm
Implant3.8mm 3.8mm
Implant4.2mm 4.2mm
implant5.0mm 5.2mm
implant6.0mm
IMPLANTS
Excellent bone cutting capacity
Narrow, long and sharp apical startingthread
Milling cutting edges
Ability to change penetration angle
during implantation in case of incorrectpre-drilling
High initial stability
Thickening threads and wide pitch (gap) provide high
bone grip and initial stability Two passive rings to allow biological width adaptation
Implant top part four threads :Two continuing of the base threads and two newthreads
Patent Pending - Locking elements
- extra resistance for anti rotational forces
[Patent Pending]
9
8/3/2019 CORTEX Catalog 2010 Edi2
10/28
Following are the majors advantages of the new SMART 1PIECE implant
IMPLANTS
10
Drilling sequence :
Markingdrill
Pilot2.0mm
The OP is a threaded self tapping one piece implants with an integrated abutment designed for one stage surgical procedure and cement restorations.
The OP is especially designed for narrow ridges and tight spaces, for placement with small bone width and small prosthetic spaces. Its unique designed
features include compress threads for immediate engagement. The OP is suitable for all bone types and for immediate loading. The insertion of the OPimplant is a quick and simple one stage procedure .Due to their innovative geometries and advanced surface morphology these unique implants offer
high initial stability. These versatile implants can be used to restore single crowns and anterior cemented bridges. The one piece smart is available in two
diameters 3.0mm and 3.3mm, have varying heights of 10mm, 11.5mm, 13mm and 16mm.
Advantages:
Designed for replacement of laterals in the maxilla and incisors in the mandible
Minimal invasive surgery
Offers fast and easy flapless procedure
Designed for narrow places
Solves tight spacing problems
Immediate function
Implant and abutment in one product
Unigrip - better and even grip and
pressure all way through the implant.
mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm
= 3.0 mm CP - 1030 CP - 1130 CP - 1330 CP - 1630
= 3.3mm CP - 1033 CP - 1133 CP - 1333 CP - 1633
CM - 0030
8/3/2019 CORTEX Catalog 2010 Edi2
11/28
IMPLANTS
11
8/3/2019 CORTEX Catalog 2010 Edi2
12/28
IMPLANTS
12
Following are the major advantages of the new Premium implant set
Pre assembled implant
and abutment
Simpleandsafeprocedure
Direct mounting of implant
and abutment (carrier)
Themoststerilewayofextractingthe
implantfromitscaseand
transferringittotheimplantlocation
Timesavingandeasytousetransferring
system
Transfer / Impression copying
Thermtransferdeviceiseasily
separatedaftermountingintotwoparts:
Thetransfertopwhichcanbe
disposedof
Impressioncopyingtobeusedas
partoftheimplantationprocedure
Disposable Transfer TopMount / Transfer
Transfer
ProductDescription CatNumber
Red PK-N005-R
Blue PK-N005-B
Green PK-N005-G
Black PK-N005-BL
Yellow PK-N005-Y
Clear PK-N005-H
Premium transferconnector
8/3/2019 CORTEX Catalog 2010 Edi2
13/28
IMPLANTS
13
Allows the implantologists toadopt any implantology strategy
during procedure: Two stages (submerge)
One stage- Metal healing cap
Plastic healing cap / Immediate loading
Immediate impression
Cost effective - 6 elements in one
packaging Cover screw
Plastic healing cap
Titanium healing cap
Transfer
Abutment
Implant
Product Description Cat Number
Premium Transfer Connector PK-N005
Premium Straight Abutment CO-8036
Abutment Screw 9.5 CO-S030
Dental Implant -
Healing Cap Plastic PK-N007
Healing Cap 3mm CO-7103
Surgical Cover Screw CS-0010
Product Description Cat Number
Healing Cap Plastic PK-N007
Premeum Implant Set Package
Healing Cap Plastic
Product Description Cat Number
Prime Driver Mount CM-0025
Dental Implant -
Surgical Cover Screw CS-0010
Prime implant set package
8/3/2019 CORTEX Catalog 2010 Edi2
14/28
INDIVIDUAL ABUTMENTS
ABUTMENTS
14
Prosthetic Platform Cat Number Collar Height
3.75 CO-7102 2 mm
3.75 CO-7103 3 mm
3.75 CO-7104 4 mm
3.75 CO-7105 5 mm
3.75 CO-7106 6 mm
3.75 CO-7107 7 mm
Healing Cap
Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver.
4.7mm
3.8mm
6mm
Prosthetic Platform Cat Number Collar Height
3.75 CO-8102 2 mm
3.75 CO-8103 3 mm
3.75 CO-8104 4 mm
3.75 CO-8105 5 mm
3.75 CO-8106 6 mm
3.75 CO-8107 7 mm
Healing Cap Narrow
Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver.
Prosthetic Platform Cat Number Collar Height
3.75 CO-8111 1 mm
3.75 CO-8112 2 mm
3.75 CO-8113 3 mm
3.75 CO-8114 4 mm
Straight Abutment With Collar
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy ( T i6Al4V). Final Torque 30 Ncm
Prosthetic Platform Cat Number Collar Height
3.75 CO-7503 3 mm
3.75 CO-7504 4 mm
3.75 CO-7505 5 mm
3.75 CO-7506 6 mm
Healing Cap Wide
Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver.
8/3/2019 CORTEX Catalog 2010 Edi2
15/28
ABUTMENTS
15
Prosthetic Platform Cat Number Compatible for implant
3.75 CO-8036 3.3, 3.75, 4.2, 5, 6 mm
Premium Straight Abutment 7 mm
Used for cement retained, single or multiple prosthetic units.Also used with a plastic impression
coping for a closed tray impressions
Titanium Alloy (Ti6Al4V). Included in Premium package
Final Torque 30 Ncm
Prosthetic Platform Cat Number Collar Height
3.75 CO-8000 9 mm
3.75 CO-8100 13 mm
Standard Straight Abutment
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030
Final Torque 30 Ncm
Prosthetic Platform Cat Number Lenght
3.75 CO-8031 11 mm
Narrow Straight Abutments
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030
Final Torque 30 Ncm
Prosthetic Platform Cat Number Collar Height
3.75 CO-9001 1 mm
3.75 CO-9002 2 mm
3.75 CO-9003 3 mm
3.75 CO-9004 4 mm
Anatomic Straight Abutments
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030
Final Torque 30 Ncm
Prosthetic Platform Cat Number Lenght
3.75 CO-8200 11 mm
Wide Straight Abutment
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030
Final Torque 30 Ncm
7mm
1.5mm
8/3/2019 CORTEX Catalog 2010 Edi2
16/28
INDIVIDUAL ABUTMENTS
ABUTMENTS
16
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Prosthetic Platform Cat Number Lenght
3.75 CO-8015 9 mm
3.75 CO-8115 12 mm
Angled Abutments 15
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy ( T i6Al4V). Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Prosthetic Platform Cat Number Lenght
3.75 CO-8025 9 mm
3.75 CO-8125 12 mm
Angled Abutments 25
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Prosthetic Platform Cat Number Collar Height
3.75 CO-9115 1 mm
3.75 CO-9215 2 mm
3.75 CO-9315 3 mm
3.75 CO-9415 4 mm
Anatomic Angled Abutments 15
Used for cement retained, single or multiple prosthetic units.
Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Prosthetic Platform Cat Number Collar Lenght
3.75 CO-9125 1 mm
3.75 CO-9225 2 mm
3.75 CO-9325 3 mm
3.75 CO-9425 4 mm
Anatomic Angled Abutments 25
8/3/2019 CORTEX Catalog 2010 Edi2
17/28
ABUTMENTS
17
Prosthetic Platform Cat Number Angle
3.75 CO-9610 Straight
3.75 CO-9615 Angled 15
3.75 CO-9625 Angled 25
Zirconium Abutments
Used for cement retained, single or multiple prosthetic units
Yttria - stabilized Zirconia. Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Used for cement retained, single or multiple prosthetic units
Titanium Alloy ( Ti6Al4V). Packaged with abutment screw CO-S020
Final Torque 30 Ncm
Prosthetic Platform Cat Number Angle
3.75 CO-9515 15
3.75 CO-9525 25
Leaf Angled Abutments 15, 25
Used for cement retained, single or multiple prosthetic units
Delrin sleeve. Packaged with abutment screw CO-S030
Final Torque 30 Ncm
Prosthetic Platform Cat Number Diameter
3.75 With Hex CO-9700 4.5
3.75 With Hex CO-9705 5
3.75 Non Hex CO-9710 4.5
3.75 Non Hex CO-9706 5
Custom Titanium Castable Abutments (UCLA)
Used for cement retained, single or multiple prosthetic units
Delrin sleeve. Packaged with abutment screw CO-S030
Final Torque 30 Ncm
Prosthetic Platform Cat Number Diameter
3.75 With Hex CO-5020 Narrow
3.75 Non Hex CO-5000 Narrow
3.75 With Hex CO-5010 Wide
3.75 Non Hex CO-5030 Wide
Custom Fully Castable Abutments
8/3/2019 CORTEX Catalog 2010 Edi2
18/28
ABUTMENTS
18
ABUTMENTS FOR SCREW COMPONENTS
Prosthetic Platform Cat Number Collar Height
3.75 CO-6105 0.5 mm
3.75 CO-6115 1.5 mm
3.75 CO-6125 2.5 mm
Esthetic Connection Abutment
Used for multiple-unit restorations at the abutment level, cast alloy bars for overdentures and
fixed/detachable restorations
Titanium Alloy ( T i6Al4V). Packaged with compatible screw screw
Final Torque 30 Ncm
For Abutment Collar Cat Number Lenght
0.5 mm CO-S060 10.7mm
1.5 mm CO-S061 11.3mm
2.5 mm CO-S062 12.3mm
Screw for Esthetic Connection Abutment
Fits Aesthetic Connection Abutments. Utilize the 1.25mm Hex Driver.
Titanium Alloy ( Ti6Al4V). Final Torque 30 Ncm
Prosthetic Platform Cat Number Connection
Aesthetic connection
Abutment
CO- 6605 Hex
CO- 6606 Non Hex
Plastic Sleeve for Esthetic Connection Abutment
May be trimmed for height and shape
Delrine
8/3/2019 CORTEX Catalog 2010 Edi2
19/28
ABUTMENTS
19
BALL ATTACHMENTS AND COMPONENTS
Prosthetic Platform Cat Number Collar Height
3.75 CO-6201 1 mm
3.75 CO-6202 2 mm
3.75 CO-6203 3 mm
3.75 CO-6204 4 mm
3.75 CO-6205 5 mm
Ball Attachment
Used for rettention of tissue supported overdentures.
Titanium Alloy ( T i6Al4V). Final Torque 20 Ncm
Cat Number Height
CO-6030 3 mm
Metallic Attachment Housing (Cap)
For nylon insert CO-6020 housing. Used for overdentures pickup or soldering
Stainless steel
Cat Number Description
CO-6020 Standard
CO-6021 Soft
CO-6022 Extra soft
Nylon insert (Silicon Cap)
For nylon insert CO-6030 housing. Used for overdentures pickup or soldering
Stainless steel
8/3/2019 CORTEX Catalog 2010 Edi2
20/28
ABUTMENTS
20
LOCATOR ABUTMENTS AND COMPONENTS
LC-LPP:locator parallel post-(4 pack)
LC-LFA4: locator female analog 4mm-4 pack
LC-LFA5: locator female analog 5mm-4 pack
LC-LCT00: locator cor tool
LC-LBPRM: locator black processing replacement male-4 pack
LC-LRMC: locator replacement male-clear-4 pack
LC-LRMP: locator light retention replacement male (pink) -4 pack
LC-LRMB: locator extra light retention replacement male (blue)
LC-LRMG: locator extended range replacement male (green)-4 pack
LC-LRMR: locator extra light Retention rep male (red)
LC-LAMG:locator angle measurement guide
LC-LIC00: locator impression coping-4 pack
8/3/2019 CORTEX Catalog 2010 Edi2
21/28
ABUTMENTS
21
Part No. Cuff Height
LC-PYLA0 0 mm
LC-PYLA1 1 mm
LC-PYLA2 2 mm
LC-PYLA3 3 mm
LC-PYLA4 4 mm
LC-PYLA5 5 mm
LC-PYLA6 6 mm
3.5 Abutments (3.75 Platfom)
LC-LMPP10: locator male processing package-10 pack
LC-LMPP2: locator male processing package-2 pack
LC-LSDT21: locator square drive tool 21mm
LC-LSDT15: locator square drive tool 15mm
8/3/2019 CORTEX Catalog 2010 Edi2
22/28
IMPRESSION COPYING
22
IMPRESSION COMPONENTS
Cat Number Height
CO-8050 9 mm
CO-8055 15 mm
Direct Pick-up Snap Copings (Closed tray)
Used to make a closed tray, implant level impression
Snap on technique
Cat Number Height
CO-8060 10 mm
CO-8065 13 mm
Indirect Transfer Copings (Open Tray)
Used to make an open tray, implant level impression
Hand tighten with the 1.25 mm Hex Driver
Cat Number Height
CM-0040 10 mm
Direct One Piece Transfer Copings (Closed Tray)
Used to make a closed tray, One Piece abutment level impression
Snap on technique
Surgical Cover Screw
Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver
For use during submerged healing. Included with implant.
CS-0010
8/3/2019 CORTEX Catalog 2010 Edi2
23/28
IMPRESSION COPYING
23
ANALOGS
Cat Number
CO-8047
Abutment Analog
Used for a laboratory fabricated abutment level stone models
Compatible to premium abutment only CO-8036
Cat Number
CO-8040
Implant Analog
Used for a laboratory fabricated implant level stone models
Compatible to all implant level components with a 3.75 platform
Cat Number
CO-8046
One Piece Analog
Used for a laboratory fabricated abutment level stone models
Compatible to One Piece implants only
Cat Number Diameter
CO-S020 2.3
Abutment Screw Short (8.3mm)
Fits all abutments
Low profile screw head
Utilize the 1.25 mm Hex Driver
Packaged with all angulated abutments
Final torque 30 Ncm.
Titanium Alloy - Ti6Al4V
Cat Number Diameter
CO-S030 2.1
Abutment Screw Long (9.5 mm)
Fits all abutments
High profile screw head
Utilize the 1.25 mm Hex Driver
Packaged with all Straight and UCLA abutments
Final torque 30 Ncm. Titanium Alloy - Ti6Al4V
8/3/2019 CORTEX Catalog 2010 Edi2
24/28
SURGICAL KITS
KITS
CORKIT BASIC
Handy collection of surgical tooling and accessories
CORKIT PLASTIC KIT
Surgical kit tooling with changeble inserts
24
Cat Number Product
CT-0800 Ratchet
CT-0250 Motor Mount 1.25 Hex L22mm
CT-0252 Motor Mount 2.42 Hex L20mm
CT-0254 Motor Mount 2.42 Hex L28mm
CT-0260 Drill Extension
CT-0207 Hex Driver 2.42mm L 7mm
CT-0215 Hex Driver 2.42mm L15mm
CT-0107 Hex Driver 1.25mm L7mm
CT-0115 Hex Driver 1.25mm L15mm
CT-0410 Guide Pin 10mm x 2
CT-0413 Guide Pin 13mm x 2
CD-1003 Round bur 1.9 without irrigation
CD-5003 Pilot Drill =2.0mm
CD-5010 Drill =2.8mm
CD-5020 Drill =3.2mm
CD-5030 Drill =3.8mm
CD-5040 Drill =4.2mm
CD-5050 Drill =4.8mm
CK-0001 Empty Metal Container
Corkit Basic
CK-0011
CK-0003
8/3/2019 CORTEX Catalog 2010 Edi2
25/28
KITS
CORKIT PRIME
Handy collection of surgical tooling and accessories
CORKIT PREMIUM
Extensive collection of surgical tooling and accessories
25
Cat Number Product
CT-0500 Screw Driver
CT-0230 Hand Ratchet
CT-0710 Depth Probe with aluminum handle
CT-0801 Ratchet with aluminum handle
CT-0410 Guide pin 10 mm
CT-0420 Spacer Guide 789
CT-0413 Guide pin 13mm
CD-1003 Round bur 1.9 without irrigation
CD-5003 Pilot Drill =2.0mm
CD-5010 Drill =2.8mm
CD-5020 Drill =3.2mmCD-5030 Drill =3.8mm
CD-5040 Drill =4.2mm
CD-5050 Drill =4.8mm
CD-5060 Drill =5.2mm
CD-5120 Countersink 5.0mm - 6.0mm
CD-5110 Countersink 3.8mm - 4.2mm
CT-0107 Hex Driver 1.25mm L7mm
CT-0115 Hex Driver 1.25mm L15mm
CT-0207 Hex Driver 2.42mm L 7mm
CT-0215 Hex Driver 2.42mm L15mm
CT-0250 Motor Mount 1.25 Hex L22mm
CT-0251 Motor Mount 1.25 Hex L28mm
Cat Number Product
CT-0252 Motor Mount 2.42 Hex L20mm
CT-0254 Motor Mount 2.42 Hex L28mm
CT-0705 Distance indicator tool
CK-0002 Cor Kit Plastic Box Without Insert
CK-INS01 Plastic Box -Insert I
Corkit Premium
Cat Number Product
CT-0801 Ratchet with aluminum handle
CT-0230 Hand Ratchet
CT-0110 Hex Driver 1.25mm L10mmCT-0210 Hex Driver 2.42mm L10mm
CD-1003 Round bur 1.9 without irrigation
CD-5003 Pilot Drill =2.0mm
CD-5010 Drill =2.8mm
CD-5020 Drill =3.2mm
CD-5030 Drill =3.8mm
CD-5040 Drill =4.2mm
CT-0410 Guide pin 10mm
CT-0413 Guide pin 13mm
CD-5110 Countersink 3.8mm - 4.2mm
CD-5120 Countersink 5.0mm - 6.0mm
CT-0705 Distance indicator tool
CK-0002 Cor Kit Plastic Box Without InsertCK-INS02 Plastic Box - Insert II
Corkit Prime
CK-0022
CK-0032
CK-INS01
CK-INS02
8/3/2019 CORTEX Catalog 2010 Edi2
26/28
SURGICAL INSTRUMENTS
TOOLING
26
Torque ratchetCT - 0860
Surgical screw
driver long
CT - 0550
DRILLS
Internal / External Diameter Cat Number
Marking drill 1.9 CD - 1003
Pilot drill internal 2.0 CD - 6003
Internal Irrigation 2.8 CD - 6010
Internal Irrigation 3.2 CD - 6020
Internal Irrigation 3.8 CD - 6030
Internal Irrigation 4.2 CD - 6040
Internal Irrigation 4.8 CD - 6050
Internal Irrigation 5.2 CD - 6060
Pilot drill External 2.0 CD - 5003
External Irrigation 2.8 CD - 5010
External Irrigation 3.2 CD - 5020
External Irrigation 3.8 CD - 5030
External Irrigation 4.2 CD - 5040
Internal / External Diameter Cat Number
External Irrigation 4.8 CD - 5050
External Irrigation 5.2 CD - 5060
Short marking dri ll 1.9 CD - S1003
Short Pilot drill External 2.0 CD - S5003
Short External Irrigation 2.8 CD - S5010
Short External Irrigation 3.2 CD - S5020
Short External Irrigation 3.8 CD - S5030
Short External Irrigation 4.2 CD - S5040
Short External Irrigation 4.8 CD - S5050
Short External Irrigation 5.2 CD - S5060
Countersink 3.8mm - 4.2mm 3.8-4.2 CD - 5110
Countersink 5.0mm - 6.0mm 5.0-6.0 CD - 5120
Internal / External Irrigation
Hand ratchetCT - 0230
Prosthetichand driverCT - 0220
RatchetCT - 0801
Depth probeCT - 0710
Surgical screwdriver shortCT - 0500
Distance
IndicatorCT - 0705
8/3/2019 CORTEX Catalog 2010 Edi2
27/28
8/3/2019 CORTEX Catalog 2010 Edi2
28/28
Cortex Dental Implants Industries Ltd.
Cortex is a dynamic and innovative company founded by a group of
experienced maxillofacial surgeons,embodies vast knowledge, experience
and engineering creativity. Cortex brings superior and groundbreaking
implant systems, packed with innovations and features ensuring outstanding
performance, fast operation and precision bringing cost effective and easy-to-
use solutions to the market.
CORTEX Dental Implants Industries Ltd.
Nof Bldg. Tefen Industrial Zone. P.O. Box 49, 24959 Israel
T: +972 4 9873970 F: +972 4 9873972CORTEX Dental Implants Industries Ltd.
Edition
2
July
10