1 ITI LIMITED, KANJIKODE WEST, PALAKKAD, KERALA Original RFQ Ref: PM486L022 dated :27.12.2016 CORRIGENDUM ISSUE 01 DATED: 12/01/2017 RFQ Ref: PM486L022 DATED 27/12/2016 FOR SUPPLY, INSTALLATION, INTEGRATION AND MAINTENANCE OF SERVERS, UTM & OTHER NETWORK ELEMENTS The Changes in the nutshell are Sl. No. Item Amendment 1 FTP Server HP/IBM/DELL/CISCO are preferred makes 2 App Server HP/IBM/DELL/CISCO are preferred makes 3 UTM Appliance Specific Make is removed and OEM should be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM. The bidder hall produce the necessary documents 4 Storage HP/DELL/EMC/Netgear/IBM/QNAP are preferred makes 5 L3 Switch CISCO, JUNIPER, HP, DELL, Dlink, NetGear are preferred makes. 6 L2 Switch CISCO, JUNIPER, HP, DELL, Dlink, NetGear are preferred makes. 7 Server Rack Rack Size is changed as 42U 8 Windows Server Windows CAL 2 numbers are required with each server License (Total 4 Server and 8 CAL) 9 Trend Micro Item is changed as Anti Virus ( Enterprise Anti virus security Suite) with attached spec 10 EMD for MSMEs registered with National Small Industries Corporation Ltd., New Delhi and in respect of which competency certificates are issued by the corporation will be exempted from payment of EMD. Attested copies of certificates shall be attached (The RFQ Document hereby revised vide Corrigendum Issue – 1 dated 12/01/2017 and appended below Page 2 to 30)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
ITI LIMITED, KANJIKODE WEST, PALAKKAD, KERALA
Original RFQ Ref: PM486L022 dated :27.12.2016
CORRIGENDUM ISSUE 01 DATED: 12/01/2017
RFQ Ref: PM486L022 DATED 27/12/2016
FOR SUPPLY, INSTALLATION, INTEGRATION AND MAINTENANCE OF
SERVERS, UTM & OTHER NETWORK ELEMENTS
The Changes in the nutshell are
Sl. No. Item Amendment
1 FTP Server HP/IBM/DELL/CISCO are preferred makes
2 App Server HP/IBM/DELL/CISCO are preferred makes
3
UTM Appliance
Specific Make is removed and OEM should be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM. The bidder hall produce the necessary documents
4 Storage HP/DELL/EMC/Netgear/IBM/QNAP are preferred makes
8 Windows Server Windows CAL 2 numbers are required with each server License (Total 4 Server and 8 CAL)
9 Trend Micro Item is changed as Anti Virus ( Enterprise Anti virus security Suite) with attached spec
10
EMD
for MSMEs registered with National Small Industries
Corporation Ltd., New Delhi and in respect of which
competency certificates are issued by the corporation
will be exempted from payment of EMD. Attested
copies of certificates shall be attached
(The RFQ Document hereby revised vide Corrigendum Issue – 1 dated 12/01/2017 and appended below Page 2 to 30)
2
REVISED RFQ
Request for Quote for Supply, Installation, Integration and Maintenance of Servers, UTM and other network elements at ITI Ltd., Palakkad GENERAL TERMS AND CONDITIONS 1. SCOPE
IT setup for Smart Card Division of ITI Ltd. Palakkad
Supply and installation of Servers , UTM firewall, Router and switches at Smart Card Division of ITI Ltd., Kanjikode West P O, Palakkad- 678 623 with the objective of Secured data transfer and data processing. Items Required Slno Item Qty
UTM Appliance - Rack mounted 2,00,000 concurrent and 15,000 new sessions,5000MBPS FW, 400 MBPS AV and 700 MBPS IPS throughput, 4 GE ports (Make - OEM should be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM) Perpetual License, 3 Year warranty, Spec attached 3
4 Storage - Rack Mounted NAS with 16 TB SATA HDD, Minimum 12 Bays and Minimum Capacity 48 TB (Make HP/DELL/EMC/Netgear/IBM/QNAP.) Spec Attached 1
8 Server Rack - 42 U Server Rack with Doors, key, 5/15A Power supply 24 Numbers , Fan, 2 Shelves etc.(Make Valrack/ Netrack,APW,Dlink,APC,iBall) 1
9 Monitor - 18.5 " LCD, Keyboard & Mouse 1
3
10 KVM Switch - 8 port Combo KVM 8* 6ft cables for servers and 1 * 6 ft cables for monitor and mouse 1
11
DesktopPC - Desk top computers Corei5, 4GB RAM/ 1TBHDD with attached Spec 8
12 Laptop PC Thin Laptop Corei5, 4GB RAM/ 1TBHDD Max 2.5 Kg with attached spec 2
13 MS Windows Server - Software License MS Windows Std 2012 R2 SNGL OLP NL along with 2 Server CAL (Total 4 Server and 8 CAL) 4
14 MS Office - Software License MS Office Standard OLP NL 8
15 AntiVirus -- Enterprise Antivirus Security Suite 3 year license Spec Attached 10
16 Installation - Installation & commissioning 1
1.1 The scope of work shall also include hardware and software items, accessories, devices, special tools required to make the IT Setup fully functional. Such additional items required shall be explicitly stated.
1.2 The bidder shall undertake the installation and commissioning tasks at Smart Card division, ITI Ltd. Palakkad.
1.3 Seamless integration of the Servers, Storage, UTM, Router, switches OS etc. meeting the required functionality is the responsibility of the bidder. The bidder shall provide necessary licenses and support for the same.
1.4 The Bidder shall provide maintenance support for service and spare parts for the warranty period of 3 years, at no extra cost.
1.5 All the cables to be drawn for the purpose of inter connection among various components including power cables and LAN cables are to be neatly laid and covered using suitable and descent conduit.
1.6 This work shall be in compliance with all applicable standards, statutory regulations and safety requirements in force of the date of award of this contract
1.7 The bidder shall also be responsible for deputing qualified personnel for installation, testing, commissioning and other services under his scope of work. All required tools and tackles for completing the scope of work is also the responsibility of the bidder
1.8 Cables must be tested after laying and connecting at both ends. The supplier shall bring all testing equipment. A test report shall be submitted after the completion of the work
1.9 All the cables, connectors, sockets, panel's etc. shall be labeled for identification purpose
4
1.10 Equipment furnished shall be complete in every respect with all mountings, fittings, fixtures and standard accessories normally provided with such equipment's and/or needed for erection, completion and safe operation of the equipment's as required by applicable codes though they may not have been specifically detailed in the technical specification, unless included in the list of exclusions
1.11 A documentation covering the details of equipments, its current configuration, installation procedure, network diagram, IP address table, list of licenses etc. need to be submitted after installation.
1.12 A single point of contact shall be provided for the networking and maintenance
2. General Information, Terms and Conditions
2.1 Total value of all items including installation and commissioning
charges will be considered for comparison, for ordering purpose. The bidder should quote for all items. Quote for partial items will not be considered.
2.3 All software licence need to be in the name of ITI Limited, Kanjikode West, Palakkad, Kerala.
2.4 The bidder need to attach all technical documentation/data sheets related to the offered items.
3. Techno commercial Eligibility
3.1 The Bidder must be a registered and reputed firm in India and should be operating in India for the last 2 (Two Years). The Certificate of incorporation or certificate of commencement of business shall be submitted.
3.2 The bidder should be an OEM or an authorised agent of the OEM of offered items. Authorised agents have to produce the certificate from the OEM in this regard.
3.3 The bidder should have sufficient technical manpower to execute the project. List of technical personnel with their experience profile shall be submitted along with the bid.
3.4 The bidder should have executed orders worth Rupees 10 lakhs towards supply and installation of Servers and storage in the last 2 years (cumulative). Documentary evidence of details of orders executed shall be submitted.
3.5 The bidder shall have office in Palakkad or nearby towns Coimbatore/Trichur/Cochin/Trivandrum/Kozhikode. Address of such office with contact details shall be submitted.
3.6 The bidder should have quoted for all items. Quote for partial items will not be considered.
5
3.7 All hardware and software item quoted shall be of latest model and version and are not declared as end of life products.
3.8 The bidder shall submit an undertaking from OEM that all equipments supplied are new and are not declared as end of life products.
3.9 Compliance statement to the specification shall be submitted along with the technical bid in the format as in Annexure B, for every line item as called for in the specification.
3.10 The bidder shall submit a statement of unconditional acceptance of full responsibility for executing the Scope of Work.
3.11 The specifications of offered items are to be submitted by OEM Documents.
3.12 Block diagram shall be submitted illustrating connections among different hardware components and layers.
3.13 The bidder shall submit copies of certificates for service tax registration no; Income tax Pan and sales tax no.
3.14 Earnest Money Deposit(EMD)
3.14.1 The vendor shall submit an EMD of Rs.50,000/-(Rupees Fifty
Thousand only) by way of Demand Draft from Nationalised /Scheduled Bank, drawn in favour of M/s.ITI Limited, payable at Palakkad. The EMD DD shall be attached in the Technical Bid.
MSMEs registered with National Small Industries Corporation Ltd., New Delhi and in respect of which competency certificates are issued by the corporation will be exempted from payment of EMD. Attested copies of certificates shall be attached.
3.14.2 The EMD of unsuccessful vendors, not meeting the general terms and conditions or techno-commercial eligibility will be returned within 30 days from the date of tender opening.
3.14.3 The EMD of successful bidder shall be discharged within 30 days after acceptance of purchase order and submission of performance bank guarantee for 10% of the Purchase Order value.
3.14.4 The EMD of all other unsuccessful bidders shall be discharged within 30 days from the price bid opening.
4 Bid Submission
The tender will be processed in Two Part Bid System (Techno-Commercial Bid and Price Bid)
4.1 Techno-Commercial Bid
6
4.1.1 The Techno-Commercial bid shall be submitted in a separate sealed envelope superscribing “Techno Commercial Bid”, indicating the enquiry referencePM486L022and due date19/01/2017.
4.1.2 The bidder should submit the techno commercial bid indicating clearly the make and model basic quantities, without price
4.1.3 The bidder shall submit the technical Bid as in Annexure A and a technical compliance statement as per format in Annexure B
4.1.5 Thebidder shall submit details and documents for meeting the eligibility conditions in clause 3.1 to 3.13.
4.1.6The EMD DD shall be attached in the Technical Bid.
4.2 Price Bid
4.2.1 The Price Bid as per the format at Annexure C shall be submitted in a separate sealed envelope, super scribing “Price Bid” indicating the enquiry reference PM486L022 and Due Date.19/01/2017.
4.2.2 The bidder should submit the price bid mention quantities and price against each item. Duties and Taxes shall be indicated against each line item.
4.2.3 Prices shall be indicated both in figures and in words for total value. 4.2.4 Prices shall be FOR AT OUR STORE(ITI Limited, Kanjikode) and shall
include all charges towards packing, forwarding, freight, transit insurance and unloading.
4.2.5 Bids shall remain valid for 120 days from the due date for submission of bids
4.2.6 The bidder who has quoted the lowest against the total of the prices mentioned at slnos.1 to 15 in Annexure-C will be considered as the L-1 bidder of the tender
4.3 Address for Bid Submission
Two sealed envelopes ie, (Techno-Commercial Bid and Price Bid) together should be put in a separate sealed envelope super scribing our enquiry Ref:PM486L022 and Due Date19/01/2017on the top. The address for bid submission is: “ The Chief Manager(MM), ITI Limited, Kanjikode West PO, Palakkad, Kerala - 678623, Phone No.(0491) 2566010 Extn 330, 375 Fax No.(0491) 2566009, Email: [email protected].
4.3.1 Clarification on Bid documents
A prospective bidder, requiring any clarification on the Bid Documents shall notify the Tendering Agency in writing or by e-mail only at the Tendering Agency’s mailing address indicated in the invitation of Bid on or before the stipulated date. The Tendering Agency will respond in writing to any request for the clarification of the Bid Documents received within the schedule. Copies
7
of the query (without identifying the source) and clarifications by the Tendering Agency will be sent to all the prospective bidders who have asked for the clarifications. Clarifications shall be made available as a corrigendum in the Tendering Agency’s web site (itiltd-india.com) and National Portal (tenders.gov.in) also.
4.4 Time Schedule Ref.No. : PM486L02 Bid Issue Date : 27/12/2016
Last date for submitting clariifcations : 09/01/2017 Reply to clarifications : 12/01/2017
Due Date for submission of Bid : 19/01/2017 2.00 PM Bid Opening Date and Time : 19/01/2017 at 2.30 PM 4.5 Rejection of Bids 4.5.1 Bids received by mail/fax will not be considered 4.5.2 Bids received after the due date of submission will be rejected 5. Delivery & L.D.
Adherence to delivery schedule is the essence of the contract. The bidder shall agree to deliver the materials as a single lot within 6-8 weeks from the date of Purchase Order. In the event of any delay in supply with respect to the agreed delivery schedule, liquidated damages will be recovered @ 0.5% per week of delay for first four weeks and 0.7% per week for every week of delay thereafter, or part thereof for the item delayed.Installation & Commissioning to be completed within 3 weeks after the supply of equipments
6. Payment Terms
6.1 90% payment will be made after 60 days of receipt, subject to successful installation and commissioning and acceptance. 6.2 10% payment after completion of warranty period. (or ) On completion of six months after commissioning and against submission of Performance Bank
8
Guarantee for a value of 10% of our Purchase Order covering the warranty period.
7. Warranty (Onsite Comprehensive)
Warranty of the complete OFC network shall be for a period of 3 years(onsite comprehensive) from the date of commissioning, acceptance and taking over. Any fault in the supplied system shall be made good within 48 hours from the time of intimation by ITI. Delay in rectifying the fault shall attract a penalty of 0.05% of the PO value per day of delay or part therof. The total penalty during the period of warranty will be adjusted with the PBG prior to the release of PBG. (PBG format as per Annexure-Dattached)
8. Assignment The bidder shall not assign any obligations of the purchase order either in full or part thereof to any other party, except under written consent by ITI. 9. Specifications
Wherever proprietary specification terms are given, equivalent open system standards and specifications are acceptable. In such cases, the bidder shall provide the offered specification in remarks Bidder can quote for items with higher specification . In such cases also , the bidder shall indicate the same in the compliance statement Item No 1
FTP Server 1 No Make
Model
Sl.No Parameter Specifications Compliance
1 Processor Server should be populated with 1Number of Intel
5 Memory Property Advanced ECC memory protection, Memory mirroring or
Equivalent
6 Hard Disk 2x300GB SAS HDD for OS , 5x1.0TB SATA HDD,15K RPM
9
7 Drives Server Chassis supports up to 8 LFF Hard Drives
Should support 3.5" SSD HDD bays in a 2U form factor
8 RAID Controller Integrated Hardware RAID controller and should support
Raid 0,1,5,6,10,50 and with upto 1GB NV Cache
9 Optical Drive DVD-RW
10 Graphics Controller Minimum 16 MB Memory
11 Ethernet Ports 4 * 1 GbE multifunctional network ports with support for iSCS protocols
12 PCI Slots Up to 4 PCIe Gen3 slots
13 Remote Management
Ability to remotely configure machines completely via command scripts with Advance Settings Utility , Should have
IDRAC ( or equivalent ) Enterprise Port card
14 Redundant Power Supply 1+1 Power Supply, Redundant Configuration, 750W
15 Redundant Cooling Fans
Hot-Swap redundant cooling fans. Fans should automatic
adjust speeds depending on the temperature inside the server chassis
16
Failure Alerting Mechanism
The server should be able to alert impending failures on maximum number of components. The components covered under alerting mechanism should at least include Processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives
17 Cluster Support Should support High Availability Clustering
18 Form Factor Rack Mount
19
OS Support & Certification
Supports
Microsoft® Windows Server® 2012 R2 (includes Hyper-V®
Microsoft Windows Server 2012 (includes Hyper-V)
Red Hat® Enterprise Linux®
VMware
Certified with Windows / RHEL /
20 Remote access Should have dedicated management port for remote access
21 Server Management The server should come with systems management licensed software with Virtualization Management
Integration into virtual consoles
VMWare Integration- Spectre
System Center VMM Integration
other features,should have dedicated port for management
22 Warranty 3 years Comprehensive onsite warranty directly from the
OEM with 24x7 support. Prefailure warranty on CPU, Memory & Hard disks
23 Make HP/DELL/IBM/CISCO
10
24 Rail Must be supplied with cable mngmt arms and rails to rack mount the servers
Item No 2
App Servers 3 Numbers Make:
Model: Sl No Parametre Specifications Compliance
1 Processor Intel® Xeon® processor E3-1200 series 3.3 GHz equivalent or higher
2 Chipset Compatible Chipset
3 Memory 16GB Memory
4 Maximum Memory Architecture: Up to 2133MT/s DDR4 DIMMs
8GB vFlash media (upgrade),16GB vFlash media (upgrade)
13 Redundant Power Supply
Up to 2 x 350W hot-plug redundant power supplies
14 Failure Alerting Mechanism
The server should be able to alert impending failures on maximum number of components. The components covered under alerting mechanism should at least include Processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives
15 Form Factor 1U / 2U rack
16 Server Management • IPMI 2.0 compliant
17 OS Support MS Windows Server, RHEL, Vmware
18 Rails Must be supplied with sliding rack rails
19 Make HP/IBM/DELL/CISCO
20 Warranty 3 years Comprehensive onsite warranty.
11
Item no 3
UTM Appliance 3 Nos
Make
Model
Slno Specification Compliance
1
The UTM Make shall be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM – Attach Document
2 The UTM shall be Rack Mountable with perpetual license
3
The warranty shall be for 3 years and service and support for 3 years from OEM
4
The product must have minimum 4 nos. of 10/100/1000 GE Copper ports.
5
The product should support 2,00,000 Concurrent sessions or above as well as 15,000 New Sessions per second or more processing
6
The product should Support minimum of 5000 Mbps of Firewall throughput
7
The product should support minimum 400 Mbps of Antivirus & 700 Mbps IPS throughput
8
Proposed Solution should support UTM or NGFW Throughput of minimum 300 Mbps.
9
The proposed solution should support link Load Balancing and Failover among more than 2 ISP Links.
10 Product should support Integrated Intrusion prevention solution.
11 Firewal solution proposed should be ICSA Certified.
12
The proposed solution should support Gateway antivirus scanning for SMTP,SMTPS POP3,POP3S IMAPS, FTP,SFTP, HTTP, HTTPS, FTP protocols
13
The proposed solution should have minimum 80+ Web-Category webfiltering solution & an Application signature database of 2000+ Applications for Application filtering
14
The proposed Solution should have option to Guarantee or limit bandwidth per User, User-Group level ,Webcategory & application level
15
The proposed solution should support On-appliance reporting or should provide external hardware/Software reporting solution supporting the same.
16
The UTM should support Secure remote access and web based GUI management
17 The UTM Support Secure Wireless
18 The UTM should support URL filtering
19 The UTM should support Ipsec and SSL VPN
20 Make CISCO/Checkpoint/Sonicwall/Sophos/Fortigate/Cyberoam
21 The UTM shall be rackmounted
12
22 The UTM should support Centralised Management
Item No 4
NAS Storage 1 No Make :
Model:
Sl No Parametre Specifications Compliance
1 CPU Intel® Ivy Bridge i3-3220v2 Dual Core 3.3GHz or higher
2 Memory 4GB ECC
3 HDDs 4 X 4 TB 3.5" SATA HDDs 7200 RPM 6 Gb/s Hot Swapable or higher
4 Drive bays 12
5 Drive Types Supported SATA/SDD 2.5” or 3.5”
6 Hot Swappable Drives yes
RAID RAID Support 0,1,5,6,10
7 eSATA Ports 2
8 Form Factor Should be a Rackmount Form Factor
9 Gigabit LAN Ports 4
Dual Gigabit Ethernet ports with link aggregation and failover
UTM Appliance - Rack mounted 2,00,000 concurrent and 15,000 new sessions,5000MBPS FW, 400 MBPS AV and 700 MBPS IPS throughput, 4 GE ports (Make - OEM should be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM) Perpetual License, 3 Year warranty, Spec attached 3
4
Storage - Rack Mounted NAS with 16 TB SATA HDD, Minimum 12 Bays and Minimum Capacity 48 TB (Make HP/DELL/EMC/Netgear/IBM/QNAP) Spec Attached 1
8 Server Rack - 42 U Server Rack with Doors, key, 5/15A Power supply 24 Numbers , Fan, 2 Shelves etc.(Make Valrack/ Netrack,APW,Dlink,APC,iBall) 1
9 Monitor - 18.5 " LCD, Keyboard & Mouse 1
10 KVM Switch - 8 port Combo KVM 8* 6ft cables for servers and 1 * 6 ft cables for monitor and mouse 1
11 DesktopPC - Desk top computers Corei5, 4GB RAM/ 1TBHDD with attached Spec 8
12 Laptop PC Thin Laptop Corei5, 4GB RAM/ 1TBHDD Max 2.5 Kg with attached spec 2
13 MS Windows Server - Software License MS Windows Std 2012 R2 SNGL OLP NL along with 2 Server CAL ( Total 4 Server and 8 CAL) 4
14 MS Office - Software License MS Office Standard OLP NL 8
19
15 AntiVirus -- Enterprise Antivirus Security Suite 3 year license Spec Attached 10
16 Installation - Installation & commissioning 1
Annexure B
Compliance Statements Wherever proprietary specification terms are given, equivalent open system standards and specifications are acceptable. In such cases, the bidder shall provide the offered specification in remarks Bidder can quote for items with higher specification . In such cases also , the bidder shall indicate the same in the compliance statement Item No 1
FTP Server 1 No Make
Model
Sl.No. Parameter Specifications Compliance
1 Processor Server should be populated with 1Number of Intel
5 Memory Property Advanced ECC memory protection, Memory mirroring or
Equivalent
6 Hard Disk 2x300GB SAS HDD for OS , 5x1.0TB SATA HDD,15K RPM
7 Drives Server Chassis supports up to 8 LFF Hard Drives
Should support 3.5" SSD HDD bays in a 2U form factor
8 RAID Controller Integrated Hardware RAID controller and should support
Raid 0,1,5,6,10,50 and with upto 1GB NV Cache
9 Optical Drive DVD-RW
10 Graphics Controller Minimum 16 MB Memory
11 Ethernet Ports 4 * 1 GbE multifunctional network ports with support for iSCS protocols
12 PCI Slots Up to 4 PCIe Gen3 slots
13 Remote Management Ability to remotely configure machines completely via command scripts with Advance Settings Utility ,
20
Should have
IDRAC ( or equivalent ) Enterprise Port card
14 Redundant Power Supply 1+1 Power Supply, Redundant Configuration, 750W
15 Redundant Cooling Fans
Hot-Swap redundant cooling fans. Fans should automatic
adjust speeds depending on the temperature inside the server chassis
16 Failure Alerting Mechanism
The server should be able to alert impending failures on maximum number of components. The components covered under alerting mechanism should at least include Processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives
17 Cluster Support Should support High Availability Clustering
18 Form Factor Rack Mount
19 OS Support & Certification Supports
Microsoft® Windows Server® 2012 R2 (includes Hyper-V®
Microsoft Windows Server 2012 (includes Hyper-V)
Red Hat® Enterprise Linux®
VMware
Certified with Windows / RHEL /
20 Remote access Should have dedicated management port for remote access
21 Server Management The server should come with systems management licensed software with Virtualization Management
Integration into virtual consoles
VMWare Integration- Spectre
System Center VMM Integration
other features,should have dedicated port for management
22
Warranty
3 years Comprehensive onsite warranty directly from the
OEM with 24x7 support. Prefailure warranty on CPU, Memory & Hard disks
23 Make HP/DELL/IBM/CISCO
24 Rail Must be supplied with cable mngmt arms and rails to rack mount the servers
Item No 2
App Servers 3 Numbers Make:
Model: Sl
No Parametre Specifications Compliance
21
1 Processor Intel® Xeon® processor E3-1200 series 3.3 GHz equivalent or higher
2 Chipset Compatible Chipset
3 Memory 16GB Memory
4 Maximum Memory Architecture: Up to 2133MT/s DDR4 DIMMs
8GB vFlash media (upgrade),16GB vFlash media (upgrade)
13 Redundant Power Supply
Up to 2 x 350W hot-plug redundant power supplies
14 Failure Alerting Mechanism
The server should be able to alert impending failures on maximum number of components. The components covered under alerting mechanism should at least include Processors, memory, PCIe slots, VRMs, power supplies, fans, hard disk drives
15 Form Factor 1U / 2U rack
16 Server Management • IPMI 2.0 compliant
17 OS Support MS Windows Server, RHEL, Vmware
18 Rails Must be supplied with sliding rack rails
19 Make HP/IBM/DELL/CISCO
20 Warranty 3 years Comprehensive onsite warranty.
Item no 3
UTM Appliance 3 Nos
Make
Model
Slno Specification Compliance
1
The UTM Make shall be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM – Attach Document
2 The UTM shall be Rack Mountable with perpetual license
22
3
The warranty shall be for 3 years and service and support for 3 years from OEM
4 The product must have minimum 4 nos. of 10/100/1000 GE Copper ports.
5
The product should support 2,00,000 Concurrent sessions or above as well as 15,000 New Sessions per second or more processing
6
The product should Support minimum of 5000 Mbps of Firewall throughput
7
The product should support minimum 400 Mbps of Antivirus & 700 Mbps IPS throughput
8
Proposed Solution should support UTM or NGFW Throughput of minimum 300 Mbps.
9
The proposed solution should support link Load Balancing and Failover among more than 2 ISP Links.
10 Product should support Integrated Intrusion prevention solution.
11 Firewal solution proposed should be ICSA Certified.
12
The proposed solution should support Gateway antivirus scanning for SMTP,SMTPS POP3,POP3S IMAPS, FTP,SFTP, HTTP, HTTPS, FTP protocols
13
The proposed solution should have minimum 80+ Web-Category webfiltering solution & an Application signature database of 2000+ Applications for Application filtering
14
The proposed Solution should have option to Guarantee or limit bandwidth per User, User-Group level ,Webcategory & application level
15
The proposed solution should support On-appliance reporting or should provide external hardware/Software reporting solution supporting the same.
16
The UTM should support Secure remote access and web based GUI management
17 The UTM Support Secure Wireless
18 The UTM should support URL filtering
19 The UTM should support Ipsec and SSL VPN
20 Make CISCO/Checkpoint/Sonicwall/Sophos/Fortigate/Cyberoam
21 The UTM shall be rackmounted
22 The UTM should support Centralised Management
Item No 4
NAS Storage 1 No Make :
Model:
Sl No Parametre Specifications Compliance
23
1 CPU Intel® Ivy Bridge i3-3220v2 Dual Core 3.3GHz or higher
2 Memory 4GB ECC
3
HDDs
4 X 4 TB 3.5" SATA HDDs 7200 RPM 6 Gb/s Hot Swapable or higher
4 Drive bays 12
5 Drive Types Supported SATA/SDD 2.5” or 3.5”
6 Hot Swappable Drives yes
RAID RAID Support 0,1,5,6,10
7 eSATA Ports 2
8 Form Factor Should be a Rackmount Form Factor
9 Gigabit LAN Ports 4
Dual Gigabit Ethernet ports with link aggregation and failover
3 UTM Appliance - Rack mounted 2,00,000 concurrent and 15,000 new sessions,5000MBPS FW, 400 MBPS AV and 700 MBPS IPS throughput, 4 GE ports (The UTM Make shall be as leader or challenger in the gartner magic quadrant for enterprise firewall/UTM) Perpetual License, 3 Year Warranty Spec attached
3
4 Storage - Rack Mounted NAS with 16 TB SATA HDD, Minimum 12 Bays and Minimum Capacity 48 TB (Make HP/DELL/EMC/Netgear/IBM/QNAP) Spec Attached