3606 | Mater. Adv., 2020, 1, 3606 This journal is © The Royal Society of Chemistry 2020 Cite this: Mater. Adv., 2020, 1, 3606 Correction: Overview of sterilization methods for UHMWPE through surface analysis Melissa Machado Rodrigues,* a Estela K. Kerstner Baldin, ab Cristian Padilha Fontoura,* a Leonardo Mathias Leidens, a Rodrigo Anto ˆ nio Barbieri, c Rafaele Frassini, d Ce ´ lia de Fraga Malfatti, b Mariana Roesch-Ely, d Carlos Alejandro Figueroa a and Cesar Aguzzoli a Correction for ‘Overview of sterilization methods for UHMWPE through surface analysis’ by Melissa Machado Rodrigues et al., Mater. Adv., 2020, DOI: 10.1039/d0ma00772b. The authors regret an error in Fig. 6a in the original article. It contained the incorrect nanoscratch trail FEG-SEM micrograph for the pristine condition. The corrected version of Fig. 6a is provided below. The authors confirm that the change does not affect the discussion of the results, nor the conclusions of the paper. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers. Fig. 6 Friction and plastic deformation behaviors for different treated samples where pristine is (a), EtO (b), CPO (c), HPP (d) and SA (e). a A ´ rea do Conhecimento de Cie ˆncias Exatas e Engenharias, PPGMAT, Universidade de Caxias do Sul, Caxias do Sul, RS 95070-560, Brazil. E-mail: [email protected], [email protected] b Laborato´rio de Pesquisa em Corrosa ˜o (LAPEC), Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre 9500, RS 91501-970, Brazil c Laborato´rio Central de Microscopia – LCMIC, Universidade de Caxias do Sul, Caxias do Sul, RS 95070-560, Brazil d Instituto de Biotecnologia, Universidade de Caxias do Sul, Caxias do Sul, RS 95070-560, Brazil DOI: 10.1039/d0ma90045a rsc.li/materials-advances Materials Advances CORRECTION Open Access Article. Published on 24 November 2020. Downloaded on 10/25/2021 12:51:43 AM. This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. View Article Online View Journal | View Issue