Main Office : CLSU Compound, 3120 Muñoz, Nueva Ecija, Philippines Tel.No. (044) 456-0213 / 282 / 287 /290 Fax No.: (044) 456-0110 Liaison Office : 3rd Floor, ATI Bldg., Elliptical Road, Diliman, Quezon City, Philippines Tel. No. (02) 927-40-19, 927-40-29 Fax No. (02) 926-81-59 Transforming the Future of Agriculture l Portable type l Higher percentage separation recovery l Blower designed with air control for regulated blowing to separate clean shelled corn from fine waste l Provided shaker to separate corn from cobs l All steel construction l Crushing type; shelling drum consist of closed cylinder with four rows of square peg tooth l Capacity: 2-2.5 tons per hour @ 25-35% moisture content l Shelling recovery: 99.86% l Purity: 99.73% l Damage kernels: <2.0% l Peg tooth cylinder l Cylinder speed: 900 rpm l Power Requirement: 16 hp gas engine or 12 hp diesel engine l Fuel consumption: 1.2 li/hr l Weight: 450-500 kgs Corn sheller cut down substantial losses incurred in manual and other corn shelling methods. These ensure less grain breakage and kernel fissures as well as prevent possible mycotoxin contamination through better shelling and minimized mechanical injury. Corn Sheller Features Specifications website: www.philmech.gov.ph Manufacturers PI Farms Products, Inc. #35 F. Alarcon Street, Sitio Malabo, Maysan, Valenzuela, Metro Manila Tel. Nos.: (02) - 4446336; 2928368 Marvel Corn Sheller and Machinery Supply North Pob., Maramag, Bukidnon CP. No. (0918) 4715174