This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Corded Rotary Hammers Drill UD 30 Page 32 Rotary hammer TE 1 Page 32 Rotary hammer TE 2 Page 33 Rotary hammer TE 2-S Page 33 Rotary hammer TE 2-M Page 34 Rotary hammer TE 7 Page 35 Rotary hammer TE 7-C Page 35
Cordless Combihammers Cordless combihammer TE 30-A36 Page 38
Combihammers Combihammer TE 30 Page 39 Rotary hammer TE 30-M AVR Page 39 Combihammer TE 40 Page 40 Combihammer TE 50 Page 40 Combihammer TE 60 Page 41 Combihammer TE 60-ATC-AVR Page 41 Combihammer TE 70-D/AVR Page 42 Combihammer TE 70-AVR Page 42 Combihammer TE 70-AVR/AVR Page 43
Demolition Hammers and Breakers Breaker TE 300-AVR Page 46 Breaker TE 500 Page 46 Breaker TE 700-AVR Page 47 Breaker TE 1000-AVR Page 47 Breaker TE 1500-AVR Page 48 Breaker TE 3000-AVR Page 48
Hammer Drill Bits (SDS) Hammer drill bit 4 - 6 mm TE-C Page 49 Hammer drill bit, multipack, 5 - 7 mm TE-CX Page 49-51 Hammer drill bit sets (metric) TE-CX Page 52 Hammer drill bit TE-CD Page 52 Hammer drill bits, 12 - 16 mm (metric) TE-YX Page 53-54 Percussion core bit TE-Y-BK Page 54-55 Bell-shaped bit TE-Y GB Page 55 Hammer drill bit metric TE-Y Page 56 Hammer drill bit TE-YD Page 56
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008. ** Hilti values following preliminary EPTA Standard 05-2009.
Trade recommendation
Applications
Working directions
Weight of tool as per EPTA 1/2003 (kg) * 3.8 kg 5.6 kg 7.9 kg 10.5 kg
Additional features Needle Adapter AVR Dust removal module (optional)
Advantages • Wall breaker with excellent performance-to- weight ratio
ToolsTE 500
Mechanical
Electrical
Building construction
• Chiseling on masonry and concrete
• Channeling
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008. ** Hilti values following preliminary EPTA Standard 05-2009.
Trade recommendation
Applications
Weight of tool as per EPTA 1/2003 (kg) * 5.7 kg 6.3 / 7.4 kg 7.7 /8.9 kg 10.2 kg
Max. single impact energy ** 5.2 J 7.0 J 11.0 J 11 J
Optimum drilling range 16 - 25 mm 18 – 30 mm 22– 80 mm 22-150mm
Optimum coring range 45 - 68 mm 45 –90 mm 60– 150 mm -
Weight of tool as per EPTA 1/2003 (kg) * 12.5 kg 14.2 kg 29.9 kg
Max. single impact energy** 26.0 J 30.0 J 68 J
Additional features AVR, brushless SR motor AVR, brushless SR motor AVR, brushless SR motor
• Top demolition performance thanks to high impact energy
• AVR system for higher productivity, longer trigger times and high comfort
• Longer service intervals due to brushless SR motor
• AVR system for higher productivity, longer trigger times and high comfort
Advantages • Minimal vibration - less than 7m/s², i.e. over 4 hours permissible trigger time
• Maintenance -free SR motor
ToolsTE 3000
Building construction
Civil engineering
Building construction
Civil engineering
Building construction
Civil engineering
• Breaking up asphalt for road building, repair work and pipe laying • Unlike air tools, needs no compressor therefore versatile
• Demolishing concrete and masonry at floor level or below waist level
• Renovation of all kinds of floors
• Demolition and penetrations at floor level or below waist level
• Renovation of all kinds of floors
* As of 1.1.2009, values for the tools must be measured in accordance with EPTA 1/2003. Hilti has been doing this since 2008. ** Hilti values following preliminary EPTA Standard 05-2009.
Hilti tools plus Hilti accessories.Total Performance.
Hot stuff.Accessories by Hilti for the workshop and jobsite.
Research and developmentWe go to great lengths to even further improve the per-formance, durability and life of Hilti accessories. In com-plex tests, for example, we confirm the life-expectancy of our hammer drill bits under the toughest conditions and prove that they practically never get stuck when drilling into rebars.
Drilling anchor holesWe make our ownWe manufacture most of our innovative power tool acces-sories ourselves. That’s why we can guarantee, among other things, that a Hilti drill bit will be replaced free of charge in the event of breakage – so long as the wear mark on the helix is still visible.
Drilling penetrationsHealth and safety Working on metals1 + 1 = 3Hilti power tools and accesso-ries are developed together, tested together and are thus perfectly matched. You there-fore benefit from the Hilti power effect – a level of sys-tem performance that adds up to much more than just the sum of its parts.
TE-C / TE- Y hammer drill bits From page XY onwards
DD-BL diamond core bits From page XY onwards
Special / univer-sal performance abrasive discs From page XY onwards
Special / universal performance cutting discs From page XY onwards
Special / universal performance slitting discs From page XY onwards
Recip saw blades From page XY onwards
Bimetal hole saws From page XY onwards
Bit and socket sets From page XY onwards
DG-CW diamond cup wheels From page XY onwards
Many dishes need a touch of chili to bring out their full flavor. The same applies to your tools in the workshop and on the jobsite – only with the right Hilti accessories do they reach their full potential.
Hot stuff. Accessories by Hilti: www.hilti.co.za
All of your accessories from Hilti.For drilling, grinding, cutting and fastening.
TE 7 230V box 1x Rotary hammer TE 7 230V 1 pc 428643TE 7 230V +DRS cas 1x Rotary hammer TE 7 230V, 1x Dust removal module TE DRS-M, 1x Case 1 pc 428645
Drilling and Demolition
www.hilti.co.za | 08000 23331
2
Rotary hammer TE 7-C
Technical dataRated input power 720 W
Rotation speed gear 1 under no load
740 rpm
Weight according to EPTA Procedure 01/2003
3.4 kg
Working mode Hammer drilling, Drilling only, Chiselling, Chisel setting
Number of gears 1
Optimum drilling di-ameter in concrete
6 - 16 mm
Optimum drilling di-ameter in concrete - max.
16 mm
Optimum drilling di-ameter in concrete - min.
6 mm
Depth gauge Yes
Dust removal module
TE DRS-M (optional)
Key applications & advantages■ Drilling and hammer drilling in concrete
and masonry■ Corrective chiseling and small channel
openings in concrete■ Occasional drilling in wood and steel
with optional quick-release chuck■ Ergonomically designed D-grip for com-
fortable use over long periods■ Robustly built and superbly engineered