Copyright © 2012 Pearson Education Inc. Work and Energy Physics 7C lecture 06 Thursday October 17, 8:00 AM – 9:20 AM Engineering Hall 1200.

Copyright © 2012 Pearson Education Inc.

Work and Energy

Physics 7C lecture 06

Thursday October 17, 8:00 AM – 9:20 AMEngineering Hall 1200


Introduction

• The simple methods we’ve learned using Newton’s laws are inadequate when the forces are not constant.

• In this chapter, the introduction of the new concepts of work, energy, and the conservation of energy will allow us to deal with such problems.


Work

• A force on a body does work if the body undergoes a displacement.

• Figures 6.1 and 6.2 illustrate forces doing work.


Work done by a constant force

• The work done by a constant force acting at an angle to the displacement is W = Fs cos . Figure 6.3 illustrates this point.

• Follow Example 6.1.


Positive, negative, and zero work

• A force can do positive, negative, or zero work depending on the angle between the force and the displacement. Refer to Figure 6.4.

© 2012 Pearson Education, Inc.

Q6.1

A. The cable does positive work on the elevator, and the elevator does positive work on the cable.

v

Motor

Cable

Elevator

An elevator is being lifted at a constant speed by a steel cable attached to an electric motor. Which statement is correct?

B. The cable does positive work on the elevator, and the elevator does negative work on the cable.

C. The cable does negative work on the elevator, and the elevator does positive work on the cable.

D. The cable does negative work on the elevator, and the elevator does negative work on the cable.


A6.1


An elevator is being lifted at a constant speed by a steel cable attached to an electric motor. Which statement is correct?




v

Motor

Cable

Elevator


Q6.2


v

Motor

Cable

Elevator

An elevator is being lowered at a constant speed by a steel cable attached to an electric motor. Which statement is correct?





A6.2


An elevator is being lowered at a constant speed by a steel cable attached to an electric motor. Which statement is correct?




v

Motor

Cable

Elevator


Work done by several forces

• W = Wtraction + Wfriction

• or

• W = (Tx + fx ) . x


A tractor driving at a constant speed pulls a sled loaded with firewood. There is friction between the sled and the road.

A. positive.

B. negative.

C. zero.

D. not enough information given to decide

Q6.4

The total work done on the sled after it has moved a distance d is


A tractor driving at a constant speed pulls a sled loaded with firewood. There is friction between the sled and the road.

A. positive.

B. negative.

C. zero.


A6.4

The total work done on the sled after it has moved a distance d is


Kinetic energy

• The kinetic energy of a particle is K = 1/2 mv2.

• The net work on a body changes its speed and therefore its kinetic energy, as shown in Figure 6.8 below.


The work-energy theorem

• The work-energy theorem: The work done by the net force on a particle equals the change in the particle’s kinetic energy.

• Mathematically, the work-energy theorem is expressed as Wtot = K2 – K1 = K.


A nonzero net force acts on an object. Which of the following quantities could be constant?

A. the object’s kinetic energy

B. the object’s velocity

C. both of the above

D. none of the above

Q6.5


A nonzero net force acts on an object. Which of the following quantities could be constant?

A6.5

A. the object’s kinetic energy

B. the object’s velocity

C. both of the above

D. none of the above


The work-energy theorem

• Wtot = K2 – K1 = K.

• Proof:

F = m dV/dt

and dx = V dt

multiply:

F dx = m V dV = d(½ m V2) = d K

Since: d W = F dx

we have: d W = d K

or W = K2 – K1


Using work and energy to calculate speed

• with 1 N push, what is V2?


Three blocks are connected as shown. The ropes and pulleys are of negligible mass. When released, block C moves downward, block B moves up the ramp, and block A moves to the right.

A. positive work on A, B, and C.

B. zero work on A, positive work on B, and negative work on C.

C. zero work on A, negative work on B, and positive work on C.

D. none of these

Q6.8

After each block has moved a distance d, the force of gravity has done


Three blocks are connected as shown. The ropes and pulleys are of negligible mass. When released, block C moves downward, block B moves up the ramp, and block A moves to the right.

A. positive work on A, B, and C.

B. zero work on A, positive work on B, and negative work on C.

C. zero work on A, negative work on B, and positive work on C.

D. none of these

A6.8

After each block has moved a distance d, the force of gravity has done


Work and energy with varying forces—Figure 6.16

• Many forces, such as the force to stretch a spring, are not constant.

• In Figure 6.16, we approximate the work by dividing the total displacement into many small segments.


Stretching a spring

• The force required to stretch a spring a distance x is proportional to x: Fx = kx.

• k is the force constant (or spring constant) of the spring.

• The area under the graph represents the work done on the spring to stretch it a

distance X: W = 1/2 kX2.


Motion with a varying force

• An air-track glider is attached to a spring, so the force on the glider is varying.

• For initial speed v1, how long can the spring extend?




½ m v12 = ½ k x2




½ m v12 = ½ k x2 + fk x


Motion on a curved path—Example 6.8

• A child on a swing moves along a curved path.

• write down all the work(s)


Motion on a curved path—Example 6.8

• gravity: mg R (1-cos θ)

• push: F R sin θ

• tension in the string: 0 (Why?)


Q6.6

A 6.00-kg block and an 8.00-kg block are connected as shown. When released, the 6.00-kg block accelerates downward and the 8.00-kg block accelerates to the right. After each block has moved 2.00 cm, the force of gravity has done

A. more work on the 8.00-kg block than on the 6.00-kg block.

B. the same amount of work on both blocks.

C. less work on the 8.00-kg block than on the 6.00-kg block.



A 6.00-kg block and an 8.00-kg block are connected as shown. When released, the 6.00-kg block accelerates downward and the 8.00-kg block accelerates to the right. After each block has moved 2.00 cm, the force of gravity has done

A. more work on the 8.00-kg block than on the 6.00-kg block.

B. the same amount of work on both blocks.

C. less work on the 8.00-kg block than on the 6.00-kg block.


A6.6


A 6.00-kg block and an 8.00-kg block are connected as shown. When released, the 6.00-kg block accelerates downward and the 8.00-kg block accelerates to the right. After each block has moved 2.00 cm, the total work done on the 8.00-kg block

A. is greater than the total work done on the 6.00-kg block.

B. is the same as the total work done on the 6.00-kg block.

C. is less than the total work done on the 6.00-kg block.


Q6.7


A 6.00-kg block and an 8.00-kg block are connected as shown. When released, the 6.00-kg block accelerates downward and the 8.00-kg block accelerates to the right. After each block has moved 2.00 cm, the total work done on the 8.00-kg block

A. is greater than the total work done on the 6.00-kg block.

B. is the same as the total work done on the 6.00-kg block.

C. is less than the total work done on the 6.00-kg block.


A6.7


Power

• Power is the rate at which work is done.

• Average power is Pav = W/t and instantaneous power is P = dW/dt.

• The SI unit of power is the watt (1 W = 1 J/s), but other familiar units are the horsepower and the kilowatt-hour.


An object is initially at rest. A net force (which always points in the same direction) is applied to the object so that the power of the net force is constant. As the object gains speed,

A. the magnitude of the net force remains constant.

B. the magnitude of the net force increases.

C. the magnitude of the net force decreases.


Q6.10


An object is initially at rest. A net force (which always points in the same direction) is applied to the object so that the power of the net force is constant. As the object gains speed,

A. the magnitude of the net force remains constant.

B. the magnitude of the net force increases.

C. the magnitude of the net force decreases.


A6.10


Summary

• Calculate the work done by a force

• Kinetic energy: Ek = ½ m v2

• work - energy theorem

• To relate work and kinetic energy when the forces are not constant or the body follows a curved path

• power P = dW/dt


Copyright © 2012 Pearson Education Inc. Work and Energy Physics 7C lecture 06 Thursday October 17, 8:00 AM – 9:20 AM Engineering Hall 1200.

Documents

positive work

negative work

motor cable elevator

steel cable

new concepts of work

pearson education

constant force

constant speed