Copyboard N - 20S/N - 20W/N - 204 User’s Manual Thank you for your purchase of the PLUS Copyboard. Please read this User’s Manual carefully before use to take full advan- tage of the functions of this product. After you have finished reading the manual, please keep it for future reference.
54
Embed
Copyboard N-20S/N-20W/N-204...Copyboard N-20S/N-20W/N-204 User’s Manual Thank you for your purchase of the PLUS Copyboard. Please read this User’s Manual carefully before use to
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CopyboardN-20S/N-20W/N-204
User’s Manual
Thank you for your purchase of the PLUS Copyboard. Please read this User’s Manual carefully before use to take full advan-tage of the functions of this product. After you have finished reading the manual, please keep it for future reference.
E-2
Introduction
This manual is for the N-20S, N-20W, and N-204 models.The N-20 copyboard exists in three types: the standard size (model N-20S), the wide size (model N-20W) and the 4-screen type (model N-204).
The descriptions and diagrams in this manual refer to the model N-20S.* When functions or operations are specific to a certain model of copyboard, the model name is specified.
Cautions on using networksAbout the network connection environment• Therequiredoperatingenvironmentissubjecttochangewithoutnotice.Also,PLUSdoesnotguaranteealloperations.• Even ifall requiredoperatingenvironmentconditionsaremet, itmayhappenthatoperationsdonotworkproperlyor thatsomeproblemsarise.Dependingonthecommunicationsstatus,displaysmaybedelayedandcommunicationerrorsmayoccur.
NOTEDo not use ruled type tapes.Donotmovethesheetwithtape,etc.,attachedtoit.Doingsocouldresultinmalfunction.Do not attach template sheets or paper to the sheet.Donotcopywhilefilm-typeobjectsorpapersareattachtothesheet.Doingsocouldresultinmalfunction.
Meaning of the Terms Used in this Manual• Mainunit(orset):Thisreferstothecopyboard.• USBmemory: referstoUSBflashmemory.• USBmemorystorage: meansthesavingofsheetsurfacedatausingMEMORY(i.e.,theUSBport)oftheoperationpanel.• Memoryforcomputerstorage: indicatesatemporarysavinglocationoftheimagethathasbeenread.• “copy”: Both“print”and“USBmemorysaving”meanto“copy.”• “Sheetsurface”: refertothedrawingportion.• “Scroll”or“move”: indicatesfeedingofthesheet• Memoryfornetworkstorage:Memoryusedfornetworkstorage.• Network:Thecommunicationsnetworkonwhichdevicesare interconnected innet fashion for communication (exchangeofdata)betweenthedevices.Forthiscopyboard,the“network”indicatestheLANbelow.
Connections and Wiring Diagram ........................... E-53
E-4
Main unit [1]Printer* [1] Pleaseseethe instructionmanualoftheprinter for informa-tionabouttheprinteraccessories.* Dependingon the type of product you havepurchased,theprintermaybesoldseparately.
Stand [1]Amobilestand(withcasters)forsupportingthemainunit.AprintertableandACadapterboxareincluded.Forthecon-tentsof the stand’spackageand instructionsonassembly,see the stand’s instructions or the separateAssembly andSetupManual.
Note• ItmightnotbepossibletoprintorcopywhenstoringtoUSBmemoryor personal computer anyportionsthataredrawnoutsideofthisrange.
approx.5mm
approx.10mmapprox.10mm
approx.5mm
Effective reading size
Front
E-6
LAN terminal (RJ-45)Connect to a LAN port on the network (switchinghub,etc.)usingacommerciallyavailableLANcable.
USB memory port (type A) Insert a commercially available USBmemory device here. Scanned imagescanbesaved.(SeepageE-19)
DC input connector ConnectthiswiththeDCplugendoftheACpoweradapter.(SeePageE-53.)(OnlyconnectthesuppliedACpoweradapter;nothingelse.)
Printer connector (USB port Type A)Connect thiswith theUSBconnector of the printer(SeePageE-53).(The printer connector is dedicated for usewith aprinter;useitonlywithaprinter.)
* This illustrationdoes not show theprinter orconnectioncords.
Personal computer (PC) dedicated USB port (Type B) ConnectthiswiththeUSBport(typeA)ofthePC.Used to connect the copyboard to a computer tomake the copyboard’s device settings.Can alsobeused to copy scanned images onto the computer.(SeepageE-23,E-35.)
Locking/unlocking the stand’s castersAfter installation, lock thecasterswith thestoppers.Whenmovingthestand,unlockthecaster’sstoppers.Thestoppersarelockedwhenthebottomispressed.Pressthetoptounlockthem.
Input/output terminals
E-7
Names of the Parts
(1) Unplug the power cord from the wall power outlet, then disconnect all the connection cords from the main unit.
(2) Remove the locking knobs (one on each side).
(3) Change the position of the main unit support pieces.
Lift the main unit about 1 cm to unhook it.
Insert the stand’s hooks securely into in the mounting holes in the main unit’s support pieces (one on each side).
(4) Fasten the two locking knobs (left and right) to the mount support pieces.
(5) Connect all the connection cables.
Changing the Height of the UnitThis is the height adjustment when setting up the copyboard on the optional stand. The stand height can be adjusted to 3 levels by 100 mm.
6 Save ( ) button (USB memory storage)Thesheetismovedby1screenandread,andtheimageisstoredontheUSBmemorydevice.WhenconnectedtoacomputerbyUSBcable,theimageisstoredinthecopyboard’sinternalmemory.
7 Network ( ) buttonScrollsandscansthesheetonescreen’sworthandsavesthedatainthefolderforsaving.Thedata issavedeitheronthecopyboardor ina folderontheFTPserver,aspreviouslyset.
8 Scroll/Stop ( ) button Scrollsthesheetonescreenportionleft,thenstopsauto-matically. A press of this buttonwhile scrollingwill stopthescrolling.
9 USB A Memory port (USB Type A)Saves in commercially-available USBmemory imagesthathavebeenreadbythecopyboard.
10 StatusThese indicators notify of errors in the copyboard,USBmemorydevice,networkorprinteraccordingtowhetherthey are lit or off and how they light (see table below).When the copyboard is functioning properly, the statusindicatorsarelitgreen.(Seetablebelow)Alsochecktheerrormessageonthedisplaywindow.Forerrorinformationandremedies,seepageE-48.
Display window
Meaning USB indicator Printer indicator
Printer problemOff Lit red
An unsupported printer is connected
USB Memory not recognized
Lit red Off
USB Memory storage problem
USB memory not connected
Memory is full
Warning that disconnection of USB memory has been forgotten
2 Display window The number of copies, operating status and errormes-sagesaredisplayedonthe7-segmentLEDs.
3 Number of Copies ( )/Test print buttonPress this button to set the number of copies to beprinted (max.10).Thenumberofcopies isdisplayedonthedisplaywindow.* “ ”isdisplayedduringtestprinting.
4 Color Print ( ) buttonThesheetismovedby1screenandread,andtheimageis printed in color in the number of copies indicated onthedisplaywindow.
When pressing a button, please press the center area (the square bulge). The button may not work if it is pressed on a corner.
Names of the Parts
E-9
6 Save ( ) button (USB memory storage)Thesheetismovedby1screenandread,andtheimageisstoredontheUSBmemorydevice.WhenconnectedtoacomputerbyUSBcable,theimageisstoredinthecopyboard’sinternalmemory.
7 Network ( ) buttonScrollsandscansthesheetonescreen’sworthandsavesthedatainthefolderforsaving.Thedata issavedeitheronthecopyboardor ina folderontheFTPserver,aspreviouslyset.
8 Scroll/Stop ( ) button When the button is pressed, the sheet scrolls onescreen’sworth to the left (to thenextscreen)andstopsautomatically.When the button is pressed, the sheet scrolls onescreen’sworth to the right (to theprevious screen) andstopsautomatically.Whenpressedduringscrolling,scrollingstops.
9 Continue ( ) buttonUsed to select the number of screenswhenprinting orstoringmultiplescreensconsecutively.
10 Consecutive printing number indicatorsThese light yellow to indicate the number of screensselectedwiththeconsecutivebutton.
11 Thumbnail ( ) buttonUsed toselect the layout forprinting thumbnailsofmul-tiplescreensonasinglepage.The selected layout is indicated on the displaywindow.(PageE-17,“PrintingThumbnails”)
12 USB A Memory port (USB Type A)Saves in commercially-available USBmemory imagesthathavebeenreadbythecopyboard.
13 StatusThese indicators notify of errors in the copyboard,USBmemorydevice,networkorprinteraccordingtowhethertheyarelitoroffandhowtheylight(seepreviouspage).When the copyboard is functioning properly, the statusindicatorsarelitgreen.(Seepreviouspage)Alsochecktheerrormessageonthedisplaywindow.Forerrorinformationandremedies,seepageE-48.
2 Display window The number of copies, operating status and errormes-sagesaredisplayedonthe7-segmentLEDs.
3 Number of Copies ( )/Test print buttonPress this button to set the number of copies to beprinted (max.10).Thenumberofcopies isdisplayedonthedisplaywindow.* “ ”isdisplayedduringtestprinting.
4 Color Print ( ) buttonThesheetismovedby1screenandread,andtheimageis printed in color in the number of copies indicated onthedisplaywindow.
④ Viewing images stored on the copyboard via a network
⑤ Viewing images stored on an FTP server via a network
Functions Specific to Model N-204
⑥ Printing thumbnails of multiple screens on a single page
⑦ Printing or storing multiple screens con-secutively
E-11
Draw on the Sheet SurfacePlease drawwith the dedicatedmarkers that have beensupplied.Ifanythingotherthanthededicatedmarkersoreraserareused,itmaybeimpossibletoerasethesheetorthesheetcouldgetdirty.Tomovethesheetmanually,see“Movingthesheetsurfacemanually”onpageE-17.
Printing(1) SetA4orlettersizepaper. Do not set anything other
thanA4orlettersizepaper.(2) Press the ON/Standby
buttonofthecopyboardandswitchonthepower.(3) Switchontheprinterpower. For instructions on operating the printer, see the
printer’soperatinginstructions.(4) Press theColorPrint or theB/WPrint button.
The copyboard will move a one-screen portion ofsheet,readtheimage,andstartthecopyoperation*.See“Printing”onPageE-14.
Saving to USB Memory (1) Press the ON/Standby button
The copyboard uses an image scanner to scan characters or diagrams drawn using special markers (four col-ors). When the Color Print or B/W Print button is pressed, the image on the screen is printed out to the printer. When a USB memory device or computer is connected, the image on the screen is saved as image data when the Save button is pressed. (For the memory for computer storage, one sheet’s worth of data is saved, overwriting previously saved data.)Furthermore, when network settings are made, image files can be saved on the copyboard or FTP server.
The date and time are stamped on the printing paper and recorded in the file information when files are stored on the copyboard and FTP server, so set the copyboard’s time correctly.The time can also be set from a computer via a network (when connected to a LAN). (See page E-40.)
Press the ON/Standby button to turn on the power.Thedisplaywindow’sLEDslightandthepowerturnson.
Press the Number of Copies button while pressing the ON/Standby button, then release the ON/Standby button.Themodeswitchesto“CBSetup”,and“F1”isdisplayedonthedisplaywindow’sLEDs.Themode returns to thenormalmode if nobuttonsareoper-atedfor10seconds.
Description of Operations
1 Switch to “CB Setup”.With the power turned on, press theNumber ofCopies buttonwhilepressingtheON/Standby button,thenreleasetheON/Standby button.
2 Press the Save button and switch to “Time Setting”.ThemodeswitcheseachtimetheSavebuttonispressed.Contentsofsettingmodedisplayedondisplaywindow
(First2digits) (Last2digits)
Christianyear Month Day Hours Minutes
3 Set the setting mode’s date and time.WhentheColorPrint orB/WPrint buttonispressedonce,thesettingcanbemade.UsetheColorPrint (Increase)andB/WPrint (Decrease)buttonstoset.
4 Press the Save button to enter the setting.Thecopyboardswitchestothenextsettingposition.Repeatsteps4and5tosetthecurrentdateandtime.• If theON/Standby button ispressedduringsteps3 to5, thepartiallymadesettingiscanceledandthedateandtimereturntothevaluessetbeforetheset-tingwasstarted.
5 Complete the setting.WhentheSave buttonispressedaftertheminute’ssettingposition(c.6display)hasbeenset,the“TimeSetting”iscompletedandthe[F1]display(CBSetup)reap-pears.PresstheON/Standby buttontoreturntothenormalmode.
Normalmode
“CBSetup”mode
Preparations : Connectthepowerplugtoawallpoweroutlet(AC100–240V).[Example]: Setting the date and time to 2:16 pm October 8, 2011
E-13
Setting the Time
Use the Color Print (Increase) and B/W Print (Decrease) buttons to select “14” (the hours), then press the Save button to enter.Thedisplayswitchesto“c6”(settingofminutes).
Use the Color Print (Increase) and B/W Print (Decrease) buttons to select “08” (the day), then press the Save button to enter.Thedisplayswitchesto“c5”(settingofhours).
Use the Color Print (Increase) and B/W Print (Decrease) buttons to select “16” (the minutes), then press the Save button to enter.Thedisplayswitchesto“F1”(functionsetting).
Press the ON/Standby button to return to the normal mode.• Thecopyboardalsoreturnstothenormalmodeifyoujustwait10seconds.
This completes the time setting.
Use the Color Print (Increase) and B/W Print (Decrease) buttons to select “10” (the month),
then press the Save button to enter.Thedisplayswitchesto“c4”(settingofday).
Use the Color Print (Increase) and B/W Print (Decrease) buttons to select “11” (the last 2
digits of the year), then press the Save button to enter.Thedisplayswitchesto“c3”(settingofmonth).
Press the Save button to move to the last dig-its of the yearThedisplayswitchesto“c2”(last2digitsofyear).Notice:The first twodigitsof theyear (“20”)are fixed.Simplypress theSave button to switch to the last 2digitsof the year settingposition.
While “F1” is displayed, press the Save button to enter.Thedisplayswitchesto“c1”(first2digitsofyear).Ifnobuttonsareoperatedfor10secondswhileinthetimesettingmode,themodereturnstothe“CBSetup”mode.
“CBSetup”mode Normalmode
E-14
Use a printer to print out the image that has been drawn on the sheet surface. Use a PLUS-designated printer.Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operat-ing instructions.
Notice• Depending on the printer’s specifications, sometimemayberequiredforcleaningoftheprinthead.
Switch on the power. Pressthepowerswitch.Thepowerindicatorlights.
This completes the preparation of the printer. PresstheColorPrint ortheB/WPrint buttononthecopyboard’scontrolpanel.Onepageworthofdataisreadandtheprintingoperationstarts.
When the Scroll/Stop button is pressed, the sheet surface scrolls onescreen’sworthtotheleft(tothenextscreen)andstopsautomatically.When the Scroll/Stop button is pressed, the sheet surface scrolls onescreen’sworthtotheright(tothepreviousscreen)andstopsautomatically.Tostopduringscrolling,presstheScroll/Stop or buttonagain.
Note• Todisplay the next screen, press theScroll/Stop button after scrollingstops. If thebutton is pressedduring scrolling, scrolling stops immedi-ately.Whenpressedagain,thesheetisscrolledonescreen’sworthfromthepointatwhichitstopped.
• Theone-screenthatisvisibleisprintableposition.• To fine-adjust thesheetsurfaceposition,with thesheetstopped,movethesheetslowlybyhand.Thesheetcanbemovedeithertotheleftortotheright.
• Printing of the portion located around the sheet surfacemight not bepossible.Pleasesee“Effectivereadingsize”onPageE-5.
Cancellation of the print operation in progress WhentheON/Standby buttonispressed,thereadingofthesheetstops,andthepartiallyreadimagedataisprinted.Waituntilthesheetisexpelledfromtheprinter.
• Theone-screenportionisreducedtoA4papersizeandprinted. Forwide typecopyboards (modelN-20W), the image iscompressedabout75% in thehorizontaldirection.Toprintwiththesameproportionsastheimageonthesheetsurface,see“MakingtheDeviceSettings”(pageE-33).
When the copyboard is not going to be used, press the ON/Standby button and switch off the power (standby mode).
E-17
Moving the sheet surface manually
Thesheetcanbemovedevenwhenthepowerofthecopyboardisswitchedoff.Thesheetcanbemovedwithyourhandeither in leftor right.Pleaseplaceyourhandattheverticalcenterandmovethesheetslowly.
Note• Toprintthumbnailsof3screens,specifythumbnailsof4screens(arrangedhorizontallyorvertically).• Ifthereisablankscreeninthespecifiedsequence,thatscreenisprintedasablank.• If theON/Standbybutton is pressedduring scanning, scanning is interrupted andonly the images that havebeenscannedareprintedasthumbnails.
2. Press Color Print or B/W Print button to print.Whenoneoftheprintbuttonsispressed,thespecifiednumberofscreensiscollectedsequentiallyinthescanningmemoryandthumbnailprocessingisperformed.Printingstartsafterthisprocessingiscompleted.
or
Themodeswitches in the followingordereach time thebuttonispressed.Thumbnails of 2 screens→ Thumbnails of 4 screens(horizontally)→ Thumbnails of 4 screens (vertically)→Cancel...• Thethumbnailsarearrangedinorderfromthecurrentlyvisiblescreen,countedtotherightasscreen1,screen2,screen3andscreen4.
Notice• Note that if you have drawn on the sheet aftermoving it manually part way or after stoppingscrolling in themiddle, the amount ofmovementforonescreen’sworthchanges,sothepositionofthescannedimageswillbesubstantiallyoff.
1. Press the Continue button and select the number of screens.
Themodeswitchesinthefollowingordereachtimethebuttonispressed.Screens1and2→Screens1to3→Screens1to4→Cancel...Thenumberofconsecutivescreensisindicatedbythenumberofconsecutiveprintingnumberindicatorsthatarelityellow.(“CP”isdisplayedonthedisplaywindowwhenconsecutiveprintingisselected.)* Thescreensarecountedinorderfromthecurrentlyvisiblescreenasscreen1,screen2,screen3andscreen4.Tostartfromaparticularscreen,presstheScroll/Stop or buttontoscrolltothatscreen.
Note• Ifthereisablankscreeninthespecifiedsequence,thatscreenisprintedasablank.• If theON/Standbybutton is pressedduring scanning, scanning is interrupted andonly the images that havebeenscannedareprinted.
2. Press Color Print or B/W Print button to print.Whenoneof theprint buttons is pressed, the screens are scanned andprinted repeatedly until the specified number ofscreenshasbeenscannedandprinted.
or
E-19
Using USB Memory
The content of what has been drawn on the sheet surface of the copyboard can be saved in USB memory. Later, the saved image can be read into a personal computer and made into a document of the proceedings of the meeting, or affixed to a document.
Insert the USB memory device into the USB A Memory port of the copyboard.
Notice• Checktheside(polarity)oftheUSBmem-ory device before inserting it. Forcing itin the reverseorientationwill damage theUSB A Memory port or USB memorydevice.
• Be careful not to bump into the USBmemory devicewith hand or bodywhileitismounted.DoingsocoulddamagetheUSBmemory device or USBAMemoryport.
Press the Scroll/Stop button (for model N-204, the Scroll/Stop or button) to display the screen to be stored.
Model name: N-20S/N-20W
Model name: N-204
Model name: N-20S/N-20W
Model name: N-204
continued on next page
E-20
Using USB Memory
Removing the USB memoryCheckthattheflashingrotationofthedisplaywindowhaschangedtosteadylightingandthattheUSBmemoryaccessindicatorisnotflashing,thenpulltheUSBmemorystraightout.(PleaseseeyourUSBmemorymanualfordetails.)
Notice• DonotunplugtheUSBmemorydeviceduringtheUSBmemorystorageoperation (i.e., during the rotating, flashing display in the displaywin-dow),orwhiletheaccessindicatoroftheUSBmemorydeviceisflashingbecausedatawillbedestroyed.
When the copyboard is not going to be used, press the ON/Standby button and switch off the power (standby mode).
A (5 second) flashing “FL”display indicates that there is insufficient free capacity topermit storage inUSBmemory.ReplacewithaUSBmemorydevicehavingsufficientcapacity.See“MeaningofErrorMessages”onPageE-48forothererrordisplays.
Plug the USB memory device into a USB port of the personal computer
When connecting to the personal computer for the first time, the installation of a USB driver is required. Fol-low the instructions manual of the USB memory device that you are using.
• Usually,withWindows XP/Windows Vista/Windows 7, thestandarddriver is installed automatically and the copyboardisidentifiedas“Removabledisk”in“MyComputer”(or“Com-puter”).
Using USB Memory
Saving Image Files on a Computer/Deleting Image Files
Examples of operations follow for saving the image files in the USB memory device to the hard disk of the per-sonal computer, and for deleting the folder when the USB memory capacity is full. (There are various methods that can be used for saving and deleting including the use of Explorer.) See the instruction manual of your per-sonal computer or the software that you are using for information about using a personal computer.
The name of the folder on the USB memory device is “CB_Image”. Image files are stored in this folder.By factory setting upon purchase, image files are named “PV-xxx.jpg” (JPEG files), where “xxx” refers to a 3-digit number starting from 001 (ex.: PV-001.jpg).When consecutive storing is performed on model N-204, numbers “-1”, “-2”, “-3” or “-4” are added to the end of the file name. (Example: When three screens are stored consecutively - PV-001-1.jpg, PV-001-2.jpg, PV-001-3.jpg)Images can be stored in JPEG, PNG or PDF format, selectable in the copyboard settings (“CB Setup”). (See pages E-33, E-40.)
DragtoMyDocuments
Saving the image files of a USB memory device to a personal computer
1. Open “My Computer” (or “Computer”) and from within, open the drive of the connected USB memory device.The folder named “CB_Image” is the saved data of thecopyboard.
2. Store the “CB_Image” folder in “My Docu-ments” or another location. Allofthedatacontainedin“CB_Image”willbestored.
NoticeDepending on the computer’s usage environment, theseoperationsmaynotworkproperly. This couldbe the caseforexample:• whenseveralUSBdevicesareconnectedsimultaneouslytothecomputer.
• when the USB device is connected to a USB hub orwhenitisconnectedusinganextensioncable.
continued on next page
E-22
Deleting USB memory image files with the com-puter
Before deleting important image files, be sure to save them on the computer (as a data backup).
1. Open “My Computer (or “Computer”)” and then open the drive icon which shows USB memory.The foldernamed “CB_Image”contains thememorystor-agedataofthecopyboard.
2. Place the “CB_Image” folder in the “Recy-cle Bin”, right click on the icon and select “Empty Recycle Bin” from the pull-down menu. Allofthedatacontainedin“CB_Image”willbedeleted.
Evenwhen the entire folder is deleted, a newCB_Imagefolderwill be created automaticallywhenUSBmemory isusedagainwiththecopyboard.
DragtotheRecycleBin
Disconnect the USB memoryThe disconnecting procedure depends on the computer’soperatingsystem.Fordetails,refertothecomputer’soperatinginstructionsorhelpfiles.
1. Click the [Hardware Removal] icon that is displayed in the task tray. Click “StopUSBMassstorageDevice -drive (E)”. (TheEdrivecharacterwilldifferdependingonthepersonalcom-putersystem.)
2. When the “USB mass storage device can be safely removed.” screen is displayed, click the display.
3. Click [X] to close.ThisallowstheUSBmemorydevicetobeunpluggedfromthecomputer.
Note• Do not disconnect theUSBmemory devicewhile theUSBmemorydevice’saccessindicatorisflashing.Doingsowilldamagethedata.
• TheUSB drivemay not be disconnected properly, forexampleifthecomputerisintheprocessofcheckingthestatusofperipherals.
“Removehardware”icon(example)
Using USB Memory
E-23
Turn on the copyboard’s power and connect the PC dedicated USB port (type B) and com-puter using the USB cable.• Usually,withWindowsXP/WindowsVista/Windows7,thestandarddriverisinstalledautomaticallyandthecopyboardisidentifiedbythecomputerasaremovabledevice.
When the copyboard and a computer are connected by USB cable, the copyboard is recognized as an exter-nal memory device (removable device). Below is the procedure for copying the “CBImage” file from this device onto the computer.Images can be stored in JPEG (.jpg), PNG (.png) or PDF (.pdf) format, selectable in the copyboard settings (“CB Setup”). (See pages E-33, E-40.) The factory default is “JPEG”.
CAUTIONWith this function, if theoperation fordisconnecting theUSBconnectionbetween thecopy-boardandcomputerisperformedorthecopyboard’spoweristurnedoff,theimagedatainthecopyboard’scomputerstoragememory isdeleted.Besure tosave important imagedataonthecomputer,etc.
On the computer, open “My Computer”, and from there open the copyboard identified as a remov-able device.(1) Double-clickthe“MyComputer”(or“Computer”)icontoopen
it.(2) When the device icon for the copyboard (displayed as a
removable disk) is double-clicked, the copyboard’s internalmemoryopens.The“CBImage”fileisthescannedimagefile(“.jpg”,“.png”or“.pdf”,accordingtosetting).• The“setup”foldercontainsthesimplenetworksettingsfile.
(3) Copy the “CBImage” file to [MyDocuments], etc., on thecomputer(“.jpg”,“.png”or“.pdf”,accordingtosetting).
Todisconnect theUSBcable, follow theprocedure in step3onpageE-22.Note that the image data in the copyboard’s computer storagememoryisdeletediftheoperationfordisconnectingtheUSBcon-nectionbetweenthecopyboardandcomputerisperformedatthistime.
Using the copyboard connected to a computer
E-25
Using the Copyboard Connected to a Network
When connecting to the network the first time(1) MakethesettingsoftheIPaddress,etc.,requiredforconnectingthecopyboardtothenetwork.See“SimpleNetworkSet-
Notice• Be sure to transfer important image files stored on the copyboard itself to a computer (data backup). If the copyboardshouldforsomereasonmalfunction,dependingonthemalfunctionthestoreddatamaybelostorbecomeimpossibletotransfer.NotethatPLUSwillacceptnoresponsibilitywhatsoeverforlossofdata,etc.
Note• Whenturningonthepowerafterthepowerplughasbeenconnectedorthepowerhasbeen turnedoff (set to the standbymode),wait about5secondsormorebeforepressingtheON/Standbybutton.
Note• Dependingonthenetworkcommunicationsconditions,sometimemayberequiredforidentificationandstorage.• If“E8”flashes(forabout5seconds),“Invalid”issetat“SecuritySetting”→“NetworkStorage”.(SeepageE-44.)• If “L1” to “L5” flashes (for about 5 seconds), this indicates that the network settings are incorrect. (SeepageE-49.)
When not using the copyboard, press the ON/Standby button to turn off the power (standby mode).
Using the Copyboard Connected to a Network
E-27
Transferring image files to/deleting them from the computer
Image files stored in the folder for saving (“Board” or “FTP Server”) can be transferred to your own computer.The operation differs according to the setting for where scanned images are stored. (See “Network Settings” on page E-42.)The image files are saved in JPEG (default), PNG or PDF format, according to the image format setting. (See “CB Setup” on pages E-33, E-40.)
The information below must be input to transfer the files.Ifyoudonotknowthisinformation,askyourcompany’snetworkadministrator.Logintothefolderforsaving(meaningconnecttothecommunicationspath):IPaddressofthecopyboardorFTPserverVerificationscreen:Ifthefolderforsavingissetto“Board”…Usernameandpasswordregisteredat“UserSetting”.Ifthefolderforsavingissetto“FTPServer”…UsernameandpasswordregisteredontheFTPserver
When the folder for saving is set to “Board”Thescannedimagesaresavedonthecopyboard.Theseimagesaredownloaded(transferred)ontothecomputerconnectedonthenetwork.Downloadingispossibleevenwhenthecopyboardisinthestandbymode(butnotifthecopyboard’spowerisnotconnectedtoapoweroutlet).
Launch the web browser on the computer and log into the copyboard.Inputthecopyboard’sIPaddress,thenpressthe[Enter]key.• Upon shipment from the factory andwhen set to thedefaults,thecopyboard’sIPaddresshasnotbeenset,sologginginisnotpossible.
Thetopmenuisdisplayed.
Click “Board File List” on the menu.Theverificationscreenopens.
From the file list, select the image to be transferred to the computer.Whentheradiobutton isclicked,itischecked andapreviewimageisdisplayed.
Download the image onto the computer.(1)Clickthe[Download]button.(2)Thecomputer’s“Saveas…”screenappears.(3)Selectthefolderforsaving,thenclickthe[Save]button. Downloadingstarts. Todownloadotherfiles,click“ReturntotheFileList”toreturntothefilelist,thenrepeatfromstep3.
Close the web browser.Clickthewebbrowser’sclosebutton([X])tocloseit.
[Download/Delete]selectionbutton
Using the Copyboard Connected to a Network
(“ReturntotheFileList”)[Download]button
E-29
Perform steps 1, 2 and 3 on page E-27 to display the file list screen.
Select [Delete].When“▾”on the [Download/Delete]selectionbutton isclicked,apull-downlistisdisplayed.Click[Delete].When[Delete] isselected,theradiobuttonsswitchtocheckboxes•.
Select the image file to be deleted.To select and delete individual files:Clickthecheckboxfortheimagefiletobedeletedtocheckit.
To delete all files:Click the [Select All] button. All the checkboxes are checked. Ifthere are several files you do notwant to delete, uncheck thecheckboxesforthosefiles.Touncheckthecheckboxesforallthefiles,click[CancelSelectAll]touncheckallthecheckboxes.
Note• Imagesarepreviewedwhentheirfilenameisclicked.• Check the scanned images using their preview imagesbeforedeletingthem.
Delete the file(s).Be sure to transfer important image files to a computer beforedeleting them (data backup).Once deleted, the files cannot beretrieved.When the [Delete]button isclicked, the image fileswhosecheck-boxesarecheckedaredeleted.• When “Invalid” is set at “DeleteUser ImageData” in “SecuritySetting”,themessage“Nodeleteauthority”isdisplayed,indicat-ing that the filescannotbedeleted. (See“SecuritySettings”onpageE-44.)
Deleting image files from the copyboardNotice• When“Invalid” issetat “DeleteUser ImageData” in “SecuritySetting”, filescannotbedeleted.Thiscanbechanged to“Valid”withtheadministrator’sauthority.(SeepageE-44.)
[Download/Delete]selectionbutton
[SelectAll]button [CancelSelectAll]button
Using the Copyboard Connected to a Network
E-30
When the folder for saving is set to “FTP Server”Whenthefolderforsavingissetto“FTPServer”,thescannedimagesaresavedontheFTPserverconnectedonthenetwork.Transfertheseimagesontothecomputerconnectedonthenetwork.ThefollowingexplainshowtotransferthefilesusingExploreronthecomputer.
Click the computer icon or, from the Start menu, click “Computer”.Exploreropens.
Log in to the FTP server.ClickonExplorer’saddressfield,inputtheFTPserver’sIPaddressafter“ftp://”,thenpressthe[Enter]key.TheFTPserver’sverificationscreenopens.
Input the required fields on the verification screen.Input the user nameandpassword registeredon the FTP server,thenclickthe[LogIn]button.• Inputtheusername(casesensitive)andpassword(casesensi-tive),thenclickthe[LogIn]button.
If theusernameandpasswordarecorrect, theverificationscreenclosesandthefilelistisdisplayed.
Transfer the image file(s) to the computer.From the FTP server’s screen listing the folders/files, select thedesired folder(s)or image file(s), right-click themouse todisplayapull-downmenu,select“Copy”,thencopythefolder(s)or file(s) toMyComputer,etc.Copyingisalsopossiblebyclickinganddragging.
Close the Explorer window.Clicktheclosebutton([X])ontheExplorerwindowtocloseExplor-er.
Deleting image files on the FTP serverAtstep4onthepreviouspage,selectthefolder(s)orimagefile(s)tobedeleted,right-clickthemousetodisplayapull-downmenuandselect“Delete”.Attheverificationscreen,click“Yes”.Thefolder(s)orfile(s)aredeleted.
There are three ways to make the device settings: using the copyboard’s operation buttons to make the set-tings (“CB Setup”), making the settings using a USB connection (simple network settings, and making the set-tings via LAN (detailed settings: “CB Setup” and “Network Setting”.
CB Setup (operating the copyboard’s buttons)
Basic setting operation• Checkthatthepowerison(thatthedisplaywindowislit).• When in the“CBSetup”mode, thecopyboardwill returntothenormalmode ifnobuttonsareoperatedfor10seconds,sooperatethebuttonswithin10seconds.
CB Setup and Network Setting Procedure
Switch to the CB Setup mode.WhilepressingtheON/Standby button,presstheNumber ofCopies button, then releasethe ON/Standby button. The copyboardswitchestotheCBSetupmode.“F1”appearsonthedisplaywindow.“F1” is the time setting. For instructions on thetimesetting,seepageE-12.
Select “the function number”, then press the Save button.PresstheNumberofCopies button(thefunc-tion switches each time the button is pressed,returning to F1 after FA) to select the desiredfunctionnumber, thenpress theSave buttontosetthatfunctionnumber.Fortheitemnamesofthefunctionnumbers,seethe“TableofFunctionNumbersandSettings”onthefollowingpage.• WhentheSave buttonispressed,thefunc-tion number to be changed is set and a dotlights(ex.:“F6.”).
Select “the setting”, then press the Save button.PresstheColor PrintorB/WPrint button,checkthesetting,thenpresstheSave buttontoset.CheckthesettingaccordingtowhethertheUSBandPrinterStatusindicatorsarelitoroff.Seethe“TableofFunctionNumbersandSettings”onthefollowingpage.
Exit the CB Setup mode.PresstheON/Standby button.Thecopyboardreturnstothenormalmode.The displaywindow returns to the number ofcopiesdisplay.
CBSetupmode
Dotlit
Normalmode
E-33
Table of Function Numbers and SettingsFunctionNumber
SettingItem Description Setting StatusIndicators
TimeSettingThedateandtimearestampedontheprintingpaperand recorded in the file informationwhen files arestored.
image is set to 1/2. The amount of datais 1/4 that of when “High Resolution” isselected.
HighResolution:Theimagefilehasthesameresolu-tionas thescanned image (vertical/horizontal size of 1/1). The picturequality is better thanwhen “Stan-dard”isselected.
Standard USB (Lit)
Printer (Off)
HighResolu-tion
USB (Off)
Printer (Lit)
GraphicsFileFormat
Selectionoftheformatinwhichimagefilesaresaved.ScannedimagesareconvertedintoJPEG(extension“.jpg”), PNG (extension “.png”) or PDF (extension“.pdf”)format.
JPEG* USB (Lit)
Printer (Off)
PNG USB (Off)
Printer (Lit)
PDF USB (Lit)
Printer (Lit)
Header/Footer
Settingofwhetherornottooutputtheheader/footerinformationregisteredonthecopyboard.“Off”:Theheader/footerinformationisnotoutput.“On”: The header/footer information is outputwhenprintingandwhensavingimagefiles.
Note:• Headersandfootersrefertotheinformationatthetop and bottommargins, respectively, of printedpagesor images.Titles,companynamesorothercharacters or images canbe inserted so that thesameinformationisprovidedonallpages.
• For instructions on creating and registering head-ers and footers, see “Creating and RegisteringHeadersandFooters”(pageE-47).
• Dependingon the typeof printer, the colorsmaydifferfromtheactualgraphicimage.
Off* USB (Lit)
Printer (Off)
On USB (Off)
Printer (Lit)
CB Setup and Network Setting Procedure
continued on next page
E-34
CB Setup and Network Setting Procedure
FunctionNumber
SettingItem Description Setting StatusIndicators
EraseReminder
Settingofwhetherornottonotifytheuserthatchar-acters or diagrams drawn on the back side of thecopyboard’s sheet surface have not been erased.Thisiseffectiveforconfidentialmeetings,etc.Disable:TheEraseReminderfunctiondoesnotwork.
(Settinguponfactoryshipment)Enable:When theON/Standbybutton is pressed to
turn the power off, the displaywindow onthecopyboard’soperationpanel flashesandthe copyboard automaticallymoves to thenon-erased surface, afterwhich the powerturnsoff.
• TheEraseReminder functionmaynotworkprop-erly due to dirt on the sheet adhesive ormarkertraces.
Turn on the copyboard’s power and connect the copyboard’s computer USB port for (type B) to the computer using a USB cable.• Normally,onWindowsXP/WindowsVista/Windows7,thestandarddriverisinstalledautomaticallyandthecopyboardisrecognizedbythecomputerasaremovabledevice.
Open “My Computer”, and in this open the copyboard (removable device).1 Double-clickthe“MyComputer”(or“Computer”)icontoopen.2 Double-clickthecopyboard(adevicedisplayedasaremovabledisk)toopenthecopyboard’scomputerstoragemem-ory.• To check that the copyboard is operating as a device, right-click “MyComputer” (or “Computer”) to display themenu, thencheck that “PLUSCopyboardUSBDevice” isdisplayedas thediskdrivenameat “Management”→“DeviceManager”forWindows7(“Properties”→“DeviceManager”forWindowsXP).
Use a program on the computer (Notepad, etc.) to open the “setting.ini” file in the “setup” folder.1 Double-clickthe“setup”foldertoopenit.2 Openthe“setting.ini” file (text format) located inthis folderusingNotepadoranotherprogramonthecomputeranddirectlyoverwritethecontentsofthesettingsfile.• Theonlycharactersthatcanbeinputarenumbersandperiods. Donotinsertanyspaces.Ifso,thefilewillbeidentifiedascorruptwhenthecopyboardisstartedandthesettingswillberesettothedefaults.
Save the “setting.ini” settings file, overwriting the previous file.Savetolocation:“setup”folderoncopyboard(removabledisk)Filename:setting.ini• Werecommendmakinganoteofchangedsettingsforfuturerefer-ence.
Once overwriting is completed, the copyboard reboots automatically.Perform theUSB disconnection procedure on the computer (seestep3onpageE-22),thendisconnecttheUSBcable.
Check the connection.1 ConnectthecopyboardtotheLANportonaswitchinghub,etc.2 Launchawebbrowser(ex.:InternetExplorer)onacomputercon-nectedtonetwork.
If the copyboard’s top screen does not openThiscouldbeduetooneofthefollowing:• HaveyoumadeamistakeinputtingtheIPaddressthatwasset?• Isthecopyboard’sLANterminalproperlyconnectedtoaLANportonthenetwork?
• IstheIPaddressthatwassetbeingusedbyanotherdevice?• Ifmultiple units of this copyboard are connected, are they con-nectedtothenetworkwiththesameIPaddress?
• Is the IP address thatwas setwithin the automatic acquisitionrangeoftheDHCPoftherouter,etc.?
Launch the web browser on the computer con-nected to the network.“Pagecannotbedisplayed”mayinsomecasesappear,butsimplycontinuetothenextstep.
CB Setup and Network Setting Procedure
continued on next page
E-38
Input the copyboard’s IP address.Inthewebbrowser’sURLfield,input“http://”followedbythecopy-board’sIPaddress,thenpressthe[Enter]key.Whenthecopyboardisconnected,thetopscreenappears.
Connecting the copyboard to the network upon purchaseUponpurchase,thecopyboard’sIPaddressandsubnetmaskarenotyetset.Besuretocheckthesection“SimpleNetworkSettings(viaUSB)”(seepageE-35)andsettheIPaddress,etc.
From the menu, click the desired setting item.When setting items forwhich verification are required are clicked,theuserverificationscreenisdisplayed.Inputtheusernameandpassword,thenclickthe[OK]button.• Nopasswordissetuponpurchase.Fortheusername,input“admin”,thenclickthe[OK]button.
2.Input the administrator’s user name and administrator’s pass-word,thenclickthe[OK]button.• Nopasswordissetuponpurchase.Fortheusername,input“admin”,thenclickthe[OK]button.Onceverificationisvalidated,theadministratorauthoritymenuisdisplayed.Clickthedesiredmenuitemtodisplaythesettingspage.
Browse and Upload buttonsSee“Header/Footer”.(PageE-41)
Setup buttonWhen clicked, the settings/changes are sent to the copyboard,overwritingprevioussettings.Onceoverwritingiscompleted,the“CBSetup”pageswitchestothe“Setupiscompleted”characterdisplay.
• If the IP address in the network settings, etc., has beenchanged,thecopyboardreboots.(SeepageE-42.)
After making settings or changes, be sure to click the “Setup” button to overwrite the previous settings on the copyboard.
Setup Whenthe[Setup]buttonisclicked,theabovesettings/changesaresenttothecopyboard,overwritingprevioussettings.Once overwriting is completed, the “CBSetup” page switches to the“Setupiscompleted”characterdisplay.
IPaddress Change the copyboard’s IP address. Use a fixed IP address for thecopyboard.WhenconnectingtoanetworkusingtheDHCPofarouter,etc., change the IP address to one that is outside of the automaticacquisitionrange
Folderforsaving Setthefolderinwhichthecopyboard’sscannedimagesaresaved.Board:Theimagesaresavedonthecopyboard.FTPServer:The images are saved in the specified folder on the FTP
server.
Board
FTPUserName This is theusernameregisteredontheFTPserver.This is requiredforthecopyboardtologintotheFTPserverandsaveimagefiles.
NetworkMode Usuallyselect“Group”.“Public”isusedforremotecontrol.For details, see “CopyboardWirelessOperationManual using “MTGPocket”Application”.
—
CB Setup and Network Setting Procedure
Note• Only one-byteEnglish letters andnumbers canbe used for the FTPuser name, password, folder name, etc.Symbols,spaces,etc.,cannotbeused.
E-43
User SettingSettheusernameandpasswordrequiredforadministratoranduserverificationandthenumberrequiredforresettingthenetworksettings.(Forinstructionsondisplayingthescreen,see“BasicSettingOperations”step3onpageE-38.)
NetworkResetNo. This is the number used for resetting the network settings. (SeepageE-46)Note:Besure tocopydown thisnumber. Itwillbe required if you forget theadministrator’spassword.
PCconnection(USB) Setwhether or not to enable or disable saving in a computer storagememory.
Valid
NetworkStorage Setwhetherornottoenableordisabletransferofimagefilestonetworkstorage(folderforsaving:“Board”or“FTPServer”)toacomputerorFTPserver.Notice:• When set to “Invalid”, the network storagememory is formatted.Transferimportantimagefilestoacomputerbeforesettingthis.
Setup Whenthe[Setup]buttonisclicked,theabovesettings/changesaresenttothecopyboard,overwritingprevioussettings.Once overwriting is completed, the “CBSetup” page switches to the“Setupiscompleted.”characterdisplay.
—
CB Setup and Network Setting Procedure
E-45
CB Setup and Network Setting Procedure
Disk management SettingTheamountofdiskspaceusedcanbechecked,thediskcanbecheckedandthediskcanbeformattedhere.(Forinstructionsondisplayingthescreen,see“BasicSettingOperations”step3onpageE-38.)
DiskCheck Whenthe[DiskCheck]button isclicked,checkingofthenetworkstor-agememory starts.When checking is completed, the results of thecheckaredisplayed.Ifawarningisdisplayed,formatthedisk.
Resetting the Network SettingsOperatethebuttonsonthecopyboardtoresetthenetworksettingstotheirdefaults.Settingitemsthatarereset:AdminUsername,AdminPassword,UserName,Password,IPAddress,SubnetMask,DefaultGate-
1. While pressing the ON/Standby button, press the Network button.Thecopyboardswitchestothenetworksettingsresetmodeand“00”flashesonthedisplaywindow.
2. Press the Color Print (Increase) or B/W Print (Decrease) button to display the network reset number.• The network reset number can be viewedwhenUser Setting is selectedwithadministratorauthority.
3. Press the Save button to enter.Tocancel,presstheON/Standby button.Whentheresetnumbermatches,“LA”flashesfor5secondsonthedisplaywindow,thenthecopyboard’snetworksettingsareoverwrittenwiththedefaultvaluesandthecopyboardautomaticallyreboots.
If “LE” flashes for 5 seconds then stops flashing, remaining lit, the reset number iswrong.• PresstheON/Standby buttontocancel,thenstartoverfromstep1.
CB Setup and Network Setting Procedure
E-47
Creating and Registering Headers and FootersTheheader/footerfunctionallowsyoutosuperimposeyourcompanyname,logo,etc.,atthetoporbottomofscannedimagesforprintingordisplay.Thedateandtimeareprintedatthetoprightoftheheader.
Creating header and footer imagesUseyourimagesoftwaretocreateaJPEGfile.Create the image with the resolutions below.Max.sizeforheaderimages:1248×110dots* Imageformat:JPEGMax.sizeforfooterimages:1248×40dots Imageformat:JPEG* Thisissometimesexpressedas“pixels”.
Image display positionImages are displayed at roughly the center in the horizontal direction. In the vertical direction they are positioned next to thescannedimagearea.Considerthiswhencreatingimageswithlessthanthemaximumsize.
Suggestions on creating imagesScanthelogodatawithanimagescanner,savethisonthecomputerasimagedata,thencroporreduceitssizetofitwithinthespecifiedresolutionandsavethisnewdata.UseWindowsPaint,etc.,topasteimages,inputcharacters,etc.,tocreatetheimage.Whensaving,saveinJPEGformatwithasizewithinthemaximumsize.
Registering created images on the copyboardExample:Hereweexplainhowtoregisteraheaderimage.Usethesameproceduretoregisterfooterimages.
1.Open the “Header/Footer” screen atDetailedSettings (viaLAN).(SeepageE-37.)
Clickthe“Header”radiobutton.3.Selecttheheaderimageyouhavecreated.Clickthe[Browse]buttontodisplaythecomputer’s“BrowseFiles”screen.Select the image file to be registered as the header, thenclickthe[OK]button.Thefilenameisdisplayed.
4.Clickthe[Upload]buttontouploadtheimagetothecopy-board.Whenuploading iscompleted,“Completedsuccessfully” isdisplayed.At this time, “HF” flashes on the copyboard’s displaywin-dow(for5seconds,afterwhichitstopsflashing,remaininglit).If“Datasizeistoolarge”isdisplayed,theimagecannotberegistered.Closethewebbrowser,thenadjusttheimagefile’ssize.
• Press the ON/Standby button andswitch off the power.When a record isrequired, switch on thepower and savetoUSBmemory.
Timesettingerror • An error has occurred when setting thetime.
• Start over and set the proper date andtime.
When the “USb” letter display isflowing...Warning that disconnec-tionofUSBmemoryhasbeenfor-gotten
• Did you press theON/Standby buttonwhiletheUSBmemorydevicewaspluggedintothemainunit?
• AUSBmemory device is plugged intothemain unit.When the USBmemorydevice is disconnected, the power willbeswitchedoffandtheunitwillenterthestandbymode.
If any of the following flashing indications appear in the display window of the control panel, please check the matters described below. Error messages flash for 5 seconds, then stop flashing, remaining lit.
• This occurswhen the size of the insertedimageistoolarge.
• Adjust the image then repeat theopera-tion.
Network-relatederrorsindicateerrorsinaccessbetweenthecopyboardandnetwork.Insomecasestheyarerelatedtothenet-worksystem,soconsult thenetworkadministrator. If theproblempersists, itmaybeduetoacopyboardmalfunction.Contactyourstoreofpurchase.
Meaning of Error Messages
E-50
Please check the following matters before making a request for servicing.
• CheckwhetherthecableoftheACpoweradapterisdisconnectedfromtheDCconnector of theCopyboardor thewall outlet. (Unplug theACpowercable from theoutlet,wait several secondsand thenplug it back into theoutletagain.)
Writingonthesheetisnoterasedwiththeeraser.
• Wasamarkerotherthanadedicatedmarkerused?
Parts of characters and lines are not dis-playedonprintoutsorinimagedata.
• Blurred characters and thin linesmay not be displayed onprintouts or inimagedata.
Scanned copy (image) is dirty, EraseReminder function is activated evenwhensheetiserasedwiththeeraser
• Checkthattheprinterpowerindicatorislit.• Checkwhetherthecopyboard’sstatusindicatorsandtheprinter’serrorindi-catorarelit.Ifanerrorisdisplayedonthecopyboard’sdisplaywindow,seepageE-48.(Please see the printer instructionmanual for information about printererrors.)
Thepaperfeedisabnormal. • Possible causes include damppaper, overly thin or thick paper, only onesheet of paper is set, and a curved setting of the paper. (Please see theinstructionmanualforyourprinter.)
Added functionsClock Used for the timestamp and for file dating properties
PC connection Images can be acquired and device settings made via USB (using a browser)
Power supplyAC power adapter
Manufacturer: Li Tone Electronics Co., Ltd. Model: LTE36ES-S2-3
Input: AC 100–240 V / 47–63 Hz, Max 0.75 AOutput: DC 12 V, 3 A, Max 36 W
Efficiency: 80%, Low 78.3%No-load: 0.075 W
Power consumption In standby: 3 W, During operation: 12 W (not including printer)
Operating conditions
Temperature: 10–35°C
Humidity: 30–85% (No condensation)
MiscellaneousRuled lines 50 mm cross-ruled squares
Miscellaneous Dedicated markers (black, red, blue, and green)
Operating environment
OS
Fully IBM PC/AT compatible computer equipped with standard USB portXP (Home Edition /Professional Edition, Service Pack 2 or greater)/Vista (32-bit version)/Windows 7 (32- or 64-bit version)Or, Apple Macintosh computer with standard USB portMac OS X 10.5 or greater
Web browserWindows: Internet Explorer 8.0 or greaterMacintosh: Safari 5 or greater* Enable JavaScript.
Note• TheACpower adapters of accessories andprinters that havebeen verified to be operationmanydiffer from the onesshownontheconnectionsdiagram(theymaybeofthebuilt-inormounted-ontype).